A pdf document created in cs5 cannot be printed in duplex on a pc without cs5 or adobe reader pro

Hi!
there is a "normal" cs5 created pdf document.
the installed cs5  pc -> i can print in duplex on every printer, without cs5 installed duplex printing not possible.
I am searching for a solution to print the pdf document in duplex mode on every printer, but only with the latest freeware version adobe xi 11.0.3.
(If i install adobe cs4 on a pc it is possible to print the document in duplex mode on a hp3525 printer, but duplex is not possible on a ricoh printer for example mpc5502.)
I cant upload the file, because its bigger than 2 mb. (5mb)
Is there anybody out there for help.
If you need the file, i´ll send 2 u.
thx

Yep, it definitely is a complicated workflow... But I'm not really sure of any other way to get from the 34" wide pattern to the home-sewing version which is split into pages and has alignment marks and whatnot. I'm very much an amateur that has figured it out as I went
I went through the page in the photo pretty thoroughly with the layer panel and I couldn't find any mystery lines... But I did find something interesting; when I click on any of the pattern lines, it shows the whole line of the pattern piece, which extends well past the edge of the artboard. So when I'm printing the poster-sized PDF to 7.5x10 pages, it's keeping all the anchor points of a line even if only a small piece of that is on the actual page.
Does this help? I've included the page in the photo as well http://www.putlocker.com/file/DADB4759DBB860D8
Thanks again to everyone!
Also, should I be keeping all the files I'm editing as .ai files and then only exporting to PDF for the very final product? I was doing that at first, but then using .pdf for the whole process didn't seem to make any difference.

Similar Messages

  • Occasional letters missing in pdf document created in Acrobat XI Pro

    I have been working on a pdf document created from Indesign By Acrobat XI Pro that will be for online download. The first version was fine. Links had to be added and some of the text coloured. After edits occasional letters have gone missing throughout the document. Why on earth is this happening? I now have to go through the entire document with a fine toothcomb before submitting it to my client again. It doesn't make me look good!
    Any ideas?
    Salli G.

    I suspect that you somehow deleted the embedding of the fonts. Check the document properties and be sure all fonts are embedded.

  • Printing a pdf document created in Acrobat Pro 9.0

    Solved the problem of printing a pdf document created using Acrobat Pro 9.0 with SL - tried many different things form adobe etc and by accident discovered while in Acrobat you have to select ADVANCED in Print then click onto SAVE AS IMAGE in next box and then OK and all prints as it should. Just thought others may want to know this if they have had problems 1

    I'm reviewing your post and while I see a fix, I can't locate the problem that you may have originally posted. Since I'm having issues, I'm hoping your's were the same.
    Sometimes when I print an Adobe Acrobat 9.0 document, most of the printed word fail to print out (although they are in the PDF document). Almost all graphical elements print and the occasional line of text--but most text is missing. Was ti your issue?
    Thanks.

  • My MacBook has Leopard Printer has asked me to 'embed fonts' in pdf text. I have used Web but mostly out of date or Windows focused. Can you advise me how best to embed fonts on pdf documents created with TextEdit ?  Thank you.

    My MacBook has Leopard. A printer has asked me to 'embed fonts' in pdf text. I have looked csrefully on Web but mostly out of date or Windows related.
    Can you advise me how best to embed fonts on pdf documents created with TextEdit ?  Thank you.  PippinD

    Hi
    Level 2 posters and Above can report various posts.
    When they do so they have various options that they can attribute as the issue.
    I have reported your post.
    I found the one block of text very difficult to read.
    9:36 PM      Monday; January 28, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Problem printing pdf documents created by ps2pdf

    When I try to print pdf documents that have been created from ps documents by ps2pdf, the output is corrupted. Many letters are missing but included graphics are printed just fine. This happens with my HP printer and with cups-pdf, when I print the pdf document to a new pdf document. There are no errors in the logs, so I don't know what is goning wrong. On a windows PC, the pdf documents are printed correct too. Other pdf documents, created by pdflatex are printed correct.
    If I don't use ps2pdf and print the ps document directly, the output is correct. I have tried different pdf-viewers without any difference. About half a year ago, everything was working fine, so could it be related to : "As of version cups 1.5.3-3 ArchLinux makes use of the new full pdf-based printing workflow."?

    Flo,
    In my limited experience with the iOS iWork apps, they weren't designed for those who are picky about the layout. They are highly automatic and if you don't like the result, it's not easy to override. If the format when printed leaves unpleasant margins, I think your best approach is to reshape the tables in such a way that they will better fit the target media. If you are having large top margin, make the tables narrower, then when they scale to fit the paper, then may fill it better.
    Jerry

  • I've exported a pdf document created in 2009 at least 20 times for a doc or docx version. Gibberish.

    I've exported a pdf document created in 2009 at least 20 times for a doc or docx version. Gibberish.

    Hi,
    Please open your PDF file in Adobe Reader then check the producer from File menu>Properties then let me know.I have seen the same issue with PDF file created by some producers.
    Or you can send me your PDF file so that I can look at it.
    Please use below site to share your file.
    https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
    Thank you.
    Hisami

  • Do all PDF documents expand in size greatly when printing?

    When I print a PDF document and watch it in the print que in Windows, the size of the document shows greatly larger than the original size of the PDF file. (sometimes 50 times larger) Is this normal for ALL PDF documents? Is it always this way or are there settings that can be changed when printed or when the PDF is created that can reduce the eventual size when printed? Thanks

    It really depends upon the printer and your printer settings. If you have print as image set or you are printing to a inkjet printer whose driver requires everything converted to dot before getting the to the printer, then yes the file size can expand to 50, 100, or 1000 times the size depending upon the resolution required by the printer. You can keep things smaller by printing at a lower resolution.

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Creating Hyperlink in Adobe Reader Pro 9

    I am trying to create a Hyperlink within a pdf with Adobe Reader Pro 9.  The way I understand it is that you are suppose to highlight the text to be used as the hyperlink and use the tool function that looks like two chain links together.  The problem is that that tool is greyed out so that I cannot use it.  I have opened multiple documents and they are all like this.  Can anyone tell me what the issue is?

    First, we need to know what product you actually have. There is no Adobe Reader Pro 9. There is Adobe Reader and Adobe Acrobat Pro. Reader cannot create links or edit PDF files. Acrobat can.

  • Edit pdf with Adobe Reader Pro XI?

    How do I edit a PDF file with Adobe Reader Pro XI?

    "How" very much depends on what exactly you want to achieve.  Basically you open it in Acrobat, then use the tools to edit it.  You may need to perform text recognition (OCR) if the document is a scanned image.
    If you need details how to do certain edits, you better ask in the Acrobat forum (Creating, Editing & Exporting PDFs).

  • Adobe Reader / Pro XI bug with PDF as embedded object in Microsoft Excel

    We are using Adobe Reader and Adobe Pro version 11.0.06, Windows 7 Enterprise 64-bit, with a mixture of MS Office 2010 and 2013.
    We have been able to reproduce a bug using Reader/Pro together with Excel, where Reader/Pro freezes when we preform the following tasks.
    Open an Excel file where a PDF file is attached as an object in the spreadsheet
    Double click and open the PDF file attached, PDF is opened in Adobe Reader/Pro
    From Adobe Reader/Pro, click on the document on the Page Thumbnails, scroll the document up and down for a few times
    Close the Adobe Reader/Pro, it freezes and the adobe process is starting to consume the system memory
    This problem is happening on multiple machines with Adobe Reader/Pro 11.0.06 installed, regardless of the Office version and is reproducible. We did not see such issue on Adobe X.
    Is there anyone reported the same?

    Hello,
    I know this problem was reported many months ago, but I am also experiencing this exact same issue, and have found no resolution to it yet. My user has a simple PDF embedded into an Excel 2010 document. Double click the PDF and it opens properly in Acrobat. If I close Acrobat, Excel freezes in the background (not responding). I have to force quit Excel to get back to Excel.
    Also, if I double click on Acrobat again to re-open the application, it won't open. If I check Task Manager after Excel crashes, I can see that Acrobat.exe is still running in memory, and I have to force-quit it before I can re-open Acorbat.
    Any progress on this issue?

  • Filling in PDF forms in Adobe Reader Pro 9

    I downloaded trial of Adobe Reader Pro 9. I need to fill in PDF forms for my job. I can't type anything in them. I enabled "Typewriter" but still can't type in them. Do I need to download an old Acrobat 7 or something to do this? Help! I need to do this by Monday (Dec 29).

    >I downloaded trial of Adobe Reader Pro 9
    There is no such thing. Check to see what you downloaded then get back to us for advice.

  • PDFs Generated by google analytics are not able to print using Adobe Reader/Pro

    HI,
    I have fetch the reports from google analytics and tried to print it using adobe reader as well adobe reader pro in mac as well as in windows. Either or it gives me an error "The Document couldnt be printed" and "There were no pages selected to print". Can you please figure it out what is the problem.
    Thank You
    Dharmit Patel

    I tried doing that, but there is no option like that in the adobe version i am using in mac. I am also attaching the images to make it clear, how it looks like. Is there any other way to do it.
    Thank you for the reply.

  • Can commenting tools be used for a PDF document created by scanning another document?

    I have Adobe Reader X.  It has commenting tools.  I
    created a PDF file by scanning another docu
    ment (a newpaper clipping) to the PDF file for an attachment to an Email. I am not able to use the highlighting tool on the new PDF document.  Since I was the author of the PDF document in this case (but obviously did not use Adobe Acrobat to create it), can I somehow enable use of commenting tools for the document?

    The highlight tool works for highlighting text that is in the document (as text objects). Images of text, which is what you get with a scan, cannot be highlighted with this tool, even if you had Acrobat.

  • Previewing a pdf document created by Acrobat 5.0 in IE 7

    I have a document converted to pdf format by Adobe Acrobat 5.0 that needs to be accessible for viewing and download from a web page.  I got it uploaded to the website and there is a link to the file on the website's home page.  I have Adobe Reader 9.1 on my computer.  When I go to open the document that I created using Acrobat 5 by clicking on the link for it, a box comes up telling me that I "need Adobe Acrobart/Reader 8 or 9 to view the document in a web browser".  My Windows XP system's Folder Options are set up to open files with a pdf extension using Adobe Reader 9.1.  Yet, when I try to access a pdf from my website I get the aforementioned error message and Adobe Acrobat 5.0 opens up, and with nothing displayed.  Has anyone experienced this, or know of a fix.... or what I may have done wrong in building the document or configured my web browser, Windows Internet Explorer 7?  -- Chessgeek

    Have you checked your preferences (Edit>Preferences>Page display) and made sure that "display large images" is checked?

Maybe you are looking for

  • How can I add left join in the coding

    I intend to dynamic add left jion in my java class. so I write the coding like below: incident_id = svc_yokyu_id(+) (Both of them have been selected in the select sentence.) However, when I run the app, it will throw a sql error.(ora-01416) then I co

  • APP - Advance already given to be cleared with Invoices (Net amt payable)

    Dear all, Pls. help me by giving the solution on how to clear Advance paid (for e.g. Rs. 20000) to Vendor (Sp. GL - A) against the invoices (for e.g. of Rs. 35000) generated after wards. i.e. net amt payable (i.e. Rs. 15000/-) to Vendor ? What additi

  • Discount type

    Hi,     I had a scenario in which they are using the condition type SKT0 (Discount),they are calculating discount during invoicing but the system is calculating discount as a whole,it is including freight charges also.the customer did n't want to inc

  • Can i use entourage on an ipad2

    Can I use entourage as a mail client on an ipad 2?

  • Adding & updating user tables with DI

    Hi, how to I add & update records of a user defined table with DI? Is there an object for this, or do I just do a DoQuery(insert etc) ? Thank you. Jose.