A perplexing "put" problem... within CS6

Dear Adobe Community,
Recently, I have encountered a problem while trying to "put" files from my local view to the remote server using FTP. While some pages seem to upload successfully and can be seen when I open the internet browser to view my webpage, other pages seem to have content that is NOT being updated. When viewing the remote server folder, I can see that the page I have "put" looks great - it's updated and ready to go. But when I view that page in the browser, a different, older version appears.
While "putting" the pages, the 'Background File Activity' window pops up and shows that, in fact, all the files associated with the page are being successfully transferred.
I have downloaded the DW updates. I have deleted the browser cache. I'm stumped!
Are there any Dreamweaver wizards out there that can help point me in the right direction?
Thanks in advance for any help you can offer,
Amy

Hi Murray,
Thank you for your response. I took a look, and I am definitely putting to the Remote Server. The weird part about the problem, is that I am able to "put" some of the pages without any difficulty and they will show up in the internet browser right away. Right now, I have one page that simply will not show up correctly in the browser. When I am viewing the pages in my Remote Server, the page in question is the most updated version and looks correct. If it looks good on the Remote Server, why do you think it isn't showing up in the internet browser as it should?
Could this be some type of synchronizing issue? Earlier I changed the following settting... would you recommend changing it back?
Site Setup --- Server --- Advanced --- 'unchecked box' for 'maintain synchronization information'
Let me know what you think and, again, thanks for taking the time to reply today : )
Amy

Similar Messages

  • A lot of FTP get/put problems using CS6

    I switched from CS5 to CS6. CS6 is using my CS5 site definitions automaticcally, FTP access etc. These project definitions are working good in CS5, so they are also good on CS6.
    But using FTP in CS6 gives me a lot of problems. It's neary unworkable sometimes. You never now when a upload succeded. You don't get an error message or a warning. Sometime you see on de FTP logs the message 'Canceled by the user'. I'm sure I never did that!.
    If you click in the 'external server' window, to open a server folder, the system doesn't respond, and doesn't open the folder.
    If you right click and say download, the systems respond, no file fouund on server.
    What I do is to use F5,  reload, then it works shortly. I can upload / downland one or two files. And the same problems are starting again.
    When the Adobe Application Manager is running in the background, downloading software or updates. Dreamweaver CS6 FTP has even more problems. I find it very irritating that you need to stop working while Adobe Application Manager is busy.
    Other people experience these strange problems?
    Pieter
    I'm using Windows XP.

    Pieter,
    Other people experience these strange problems?
    Maybe yes, but not with the exact same symptoms, I guess.
    When something doesn't work the way it should, first things first - clear your cache: http://forums.adobe.com/thread/494811
    See if that fixes it.
    AAM (Adobe Application Manager) and DW - I haven't come across with any dependancy issues so far.
    Is the upload issue happening for all sites or just one? If it is just one, can you try checking with a different site?
    The problem usually may also lie with the remote server end? Are you able to connect to the server via a 3rd party FTP - something like Filezilla? http://filezilla-project.org/
    -ST

  • I am having the following problems with CS6 *NOT CREATIVE CLOUD*

    So I purchased an upgrade for CS5 to CS6 and I did NOT purchase the Creative Cloud Option. I am having this host of problems:
    • Illustrator CS6 Crashes on Quit
    • Once launched Illustrator CS6 refuses to open new and existing documents unless I quit and restart.
    • Once Illustrator CS6 is launched and managed to open an new document, Illustrator CS6 refuses to import a link into a new or existing document unless I quit and restart.
    • From time to time, Illustrator CS6 will refuse to copy and paste from one document to another or within the same document until I quit and restart.
    • Illustrator CS6 ignores all my UI preferences. This happens every time I restart. This never happened with CS5 when I was running it and I am seriously considering going back to CS5
    Has anyone else experienced these problems as well?
    I am running my CS6 on OS X 10.9.5, 2.6Ghz Intel Core i7 with 16gb 1600 MHz DDR3 MacBook Pro.
    Please help.. there are only so many crash reports I am willing to fill out and send to no one because I get no response.

    Sounds like permission problems to me. Go to HD/Users/<yourname>/Library/Application Support/Adobe Illustrator CS6 and do a Get Info on that folder. Make sure that the permissions are set for Read/Write for you.

  • Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.

    Hullo sir,
                    I'm Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.The printer window shows you have to print pages < 50.what cani do?

    Hi @thangaraj,
    I see by your post that you have only printed 300 pages and it is now it is showing you have less the 50 pages left.
    I would like to help you resolve this issue.
    Is this the original toner that shipped with the printer?
    You should get approximately 1500 pages according to the specifications for what ships in the box.
    The page count is based on page yield. Depending on what you were printing.
    Still I believe you should have gotten more then 350 pages, unless you were printing full page pictures in black and white.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Top 10 common problems within GL,AR, AP

    Top 10 common problems within GL,AR, AP
    I will like a Typical or common problems that one is likely to face when working within GL, AR and AP.
    If you can provide possible solution will be great as well. Thanks
    All experts that work within these area are welcome, all contribution no matter how little with be appreciated.

    Hi,
    You can refer the following ML docs, may be following doc could help u,
    [Troubleshooting various Issues in Translation of Oracle General Ledger|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=296379.1]
    [Troubleshooting Accounts Payable Trial Balance (Open Account AP Balance Listing) issues in R12|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=553484.1]
    [AP Transfer to GL (Posting) Troubleshooting Guide|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=106647.1]
    More over you can search the Metalink as there could be numerous no of issues relating to AP, GL and AR in general.
    Thanks,
    Anchorage :)

  • Problems within VL10b (delivery is NOT created)

    Hi guys,
    I'm experiencing problems within VL10b.
    I created a cross-company purchase order with all the necessary data. If I open VL10b and select the order (by date or order number... both works) it is shown just fine. BUT when I click the button for background creation, it doesn't work.
    There's no log or error-message, just nothing which would give me a hint about what's the problem.
    Anybody got any ideas what to check in order to find out where's the problem?
    Any input is greatly appreciated... thx & regards,
    Bobby

    Jürgen,
    I checked the log already beforehand (and got disappointed).... here is what the system says:
    Diagnosis
        An error has occured while delivering the order items in the
        background that cannot be processed in the program.
    System Response
        The system does not generate any deliveries.
    Procedure
        Try to correct the error, described in the next error
        message, or try to deliver order  that has caused it with
        ship-to party .
    Procedure for System Administration
    Regards,
    B.

  • Problems with CS6 using Bridge

    Hi - any help will be greatly appreciated! I cannot get PS6 to use Bridge or MiniBridge.  I just get "Waiting for Bridge CS6"
    I'm running Windows 7, SP1; and McAfee Security Center 11.6.  My account has Admin privileges.  I installed a full version of CS6 from CD. And I installed the latest updates (as of 4/3/13) for both products.PS6 and Bridge.
    Here's what I've tried:
    I installed CS6 successfully - Bridge won't launch from within CS6 (Bridge runs fine as a separate application.)  I uninstalled CS2, and rebooted, then re-installed CS6 - Bridge still won't launch.
    I uninstalled Photoshop Elements 10 (all the pieces) & rebooted.  I re-installed CS6 – Bridge still won't launch.
    I uninstalled Lightroom 1 & rebooted.  I re-installed CS6 - Bridge still won't launch.
    I checked online to try to find a solution and found this link:  http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
    I renamed the switchboard folder; re-booted; launched CS6 – Bridge still won’t launch.
    I checked for issues with McAfee. McAfee lists both Photoshop CS6 and Bridge CS6 as having Full access to the internet.  I cannot find any way to allow or block programs on my PC from communicating with each other.
    I checked my hosts file.  It contains only comments.
    I cleared the cryptographic database and deleted keys via regedit (as instructed by link above) & re-booted.
    The only thing I did not try on the list was moving everything to a new account.  I am really reluctant to do this because it is more onerous than using Bridge as a stand-alone app!
    Thanks in advance!

    Thanks for the reply, Mylenium.  Unfortunately, that didn't make any difference. 
    I first attempted to re-install the current version and got the message "Adobe Air already installed.  This version of Adobe Air is already installed on your system."
    Next, I un-installed the version on my computer, re-booted, then re-installed it.  That didn't work either.

  • Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db.  No indication what the problem is.  How do I get adobe help with these problems?

    Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db.  No indication what the problem is.  How do I get adobe help with these problems?

    Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db.  No indication what the problem is.  How do I get adobe help with these problems?

  • Having problems downloading cs6 web premium

    having problems downloading cs6 web premium trial

    As Rave said we need more information in order help troubleshoot the problem better. Please provide relevant information.
    Thanks
    Nikhil

  • If my iphone 5 has a problem within the first 30 days will apple replace it with a brand new one or will i get a refurbished model.

    if my iphone 5 has a problem within the first 30 days will apple replace it with a brand new one or will i get a refurbished model??

    If it is replaced under warranty, it will be replaced with a unit from the "replacement stock", which either will be a refurb or new (no way to distinguish these) and the S/N will indicate a replacement unit.
    The "30 day" rule varies from county to country, and applies only to returns, not replacement.

  • My iPad has a software problem within the first year, but I am in South Africa.

    My iPad has a software problem within the first year. When I bought it, I took an Apple care plan with it. At the moment I am in South Africa for my internship and when I go to a premium reseller, they are not able to fix my iPad or change it because they say that they are not an official Apple store. What should I do now? I stay here till the end of December and I would like to use it during my internship.

    We're regular users like you and know no secret magick Apple engineer incantation. If you care to detail what the problem is, we will do our best to help.

  • Problems activating CS6 apps on Windows

    I have the exact same problem, but on Windows 7. Premiere has activated, but After Effects and Photoshop keep on asking for login and then a serial number. Pretty annoying since I am paying a subscription and getting hassled with this.

    It is possible you have a permission issue from your previous trial installation.  Please complete the following:
    Uninstall all Adobe Creative Software using Programs & Features
    Run the cleaner tool - CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Try the installation again of Creative Suite 6
    If you continue to run into difficulties then I would recommend reviewing your installation logs.  You can find details on how to review these at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Can we put subroutines within loops?

    q]     Can we put subroutines within loops?- i mean not the PERFORM Statement  but the FORMENDFORM statement

    Hi
    If your question means .. calling Performs within Loops ?
    Then its possible..
    LOOP.
    PERFORM P1. ( THIS IS OK )
    ENDLOOP.
    But this is not correct..
    LOOP.
    FORM P1.
    ENDFORM.
    ENDLOOP.
    Thanks
    Hope it Helps.
    Praveen

  • Requested extension com.adobe.Vibration is not supported for Windows-x86 Problem with Cs6,air3.4.

    While compiling my application on Flash CS6 with Air for iOS 3.4, I am getting the error given below:
    The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86.
    I am using vibration.ane file which got it from Adobe (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html)
    Anybody out there who knows how to solve this problem!
    Thanks.

    1) The vibration ANE from Adobe does not support Windows.
    2) The iOS simulator (adl) is not a virtual machine but rather it is a native Windows app, thus the platform your app runs on is Windows not iOS.
    What Adobe needs to do to avoid confusing everyone is one of two things:
    1) Include a stub for Windows (and MacOS) in the Vibration ANE.
    2) Make it possible to deploy an app to a platform where the ANE is not supported, but produce a runtime error upon an attempt to use the ANE. The developer could then put logic in the app to detect the underlying platform and make adjustments.

  • Editing text problem (Photoshop cs6)

    When editing text, arrow keys (left and right) are not working in photoshop cs6

    hmmm... I really didn't understnand.....
    I just checked it again in CS6:
    1. Wrote down text in 3 lines...for instance
    2. Select all (Crtl+A)
    3. Keep Alt and use keyboard arrows "up" & "down", situation was the same - leading values jumping like 30pt - 44pt - 58 pt.....
    Than I wanted to check it on CS5. In CS5 values changing through 2pt: 30 - 32 - 34 etc. Good!...
    Than I run CS6 again and did the same.... and....DAMN IT!!....It starts to work I wanted!!!!... Fantastic!!!
    Now...I'm in perplexity...a little..... What it was..... I didn't any changes ... not in general preferences...not in text preferences in character palette..... May be it's new any feature & I don't know about it yet....or...may be it bug.....or may be some preferences crosses between different verses of CS?
    WIll use it more times and looking....
    p.s. now I decide to reload OS and check again & post results later...
    p.s.2 ...befor reloading....opened old psd....made in CS3 & tried to change leading in text blocks - it jumped through 10pt........ mmmm ...it looks like CS6 not correctly work with old files (that were made in cs3 for example).... It's not  clear for me yet....what problem in

Maybe you are looking for