"a placed instance of this link is modified" though I tried to re-link the same file.

"a placed instance of this link is modified" though I tried to re-link the same file. Problem does not occur when I place the same file in a new indesign document

I'm going to repeat what I said previously, but in a different way to make it clearer, I hope. You have more than one instance of the same placed file. The file was modified after it was placed for at least one of these instances and that instance has not been updated. Updating that instance should resolve the issue.
If there is no instance of the link in the links panel that shows the modified warning, then the file is probably damaged in some minor way and you should see Remove minor corruption by exporting

Similar Messages

  • Linking Questions cs5: Linking within the Same file, Sharing links, file size bloat

    I have to make print cards for my job. Print cards being a 1 page version of the Larger package layout that the place I work manufactures. On this print card is a section for customer info on top, and the print representation on the bottom. What I've been doing is using two files. The first file is the full-scale art on one artboard, and the customer info on the second artboard, but both within one file.
      On the second file, I combine the two. I still use two artboard because it's a front and back print-off. The front page (1st art board, 2nd file), is the customer info at the top (linked from the 2 art board, 1st file) and the full art shrunk to fit below (also linked).  the back page (2nd art board, 2nd file) is the individual elements of the artwork, zoomed in for easier viewing. For the second page, I use masked links from the fullsize art, sized appropriately. The reason it's important that they all use links, is so if I update the art, it will update the print cards as well.
      I've been trying to stream-line this process. This works ok, but the numerous links bloat the file size, and I have to email these to customers. I've started using "Flatten Transparency" on all my Print cards (2nd file) and saving it as a separate .pdf. This cuts out the links, but then all of my masked images are hiding the whole original file behind their mask. So then I started manually cropping each individual masked area, which helps, but once I've gone through this whole process, I don't think I've saved any of the time my template was supposed to save.
    file://localhost/Users/troubleinthemaking/Desktop/PRINT%20MINI%20EXAMPLE.pdf
      My questions are these:
    Is there any way to link to elements within the same file? Like from a different artboard?
      I've successfully 'Placed' an artboard from the same file, back into that file (but a different artboard), but this creates a never-ending Save/Update loop. I'd like a better way to do this.
    Is there a way to have all instances of a linked file, draw from the same place? i.e. When you update a single link, all instances of that Link would update. plus this would, in theory, cut down on the file size.
    Is there any way to automatically have every masked link crop itself after using the flatten transparency command?
      Even if I had to select them first. I haven't had any luck selecting them all and then using the pathfinder crop tool. I've had to do each one individually.
    I know this last one can't really be answered without seeing everything on my machine. I don't even know what info I'd need to give...
    WHY MY FILE SIZE SO BIG!
    Thanks ahead of time.
    -Jefferson

    Jefferson:
    There's a few things you can do to make your files smaller, such as using the Action "Delete All Unused Panel Items" which will removed all unused Symbols, Graphic Styles, Brushes and Swatches from your Illustrator files. Those little items add up to bloating a file.
    You also need to examine the images that you place into your Illustrator file. Any unnecessary layers or channels? Can the files be flattened before being placed in Illustrator? You can always keep a "working" Photoshop file of all that extra goobledeegook and then flatten the file and do a "Save As" and place that in the Illustrator file. And that could be a Photoshop EPS saved with a TIFF Preview and JPEG Encoding (Maximum Quality), which will save some MBs.
    But, you should never sacrifice file size for quality. If these files are going to print, you should be using an FTP program to transfer the files and not email them. Email should not be used for files over 5 MB. If all you want to do is send the customer a Low Resolution PDF Proof for approval via Email, that's fine and dandy, but send the final large size files to the Printer via FTP.

  • Can I create multiple links to the same file without duplicating file?

    does anyone know if it is possible to create multiple links to the same file using iWeb without the program automatically making multiple copies of that file in the published output? It seems that one file is created for each link.
    Thanks!

    Hi Franz,
    have a look at the second method on this page
    http://alyeska.altervista.org/en/iWeb_Downloads.html
    see if you understand how it works (if you don't, please ask me)
    Regards,
    Cédric

  • I purchased a song on my iMac on iTunes and it plays on that but won't play on my macbook even though both computers are authorized under the same iTunes account.  how do I fix this?

    I purchased a song on my iMac on iTunes and it plays on that but won't play on my macbook even though both computers are authorized under the same iTunes account.  It says that i have to authorize my macbook and sign into iTunes, but then says its already authorized.  How do I fix this?

    Hi stuartbonk,
    Welcome to the Support Communities!  Here are some steps you can try if you keep getting asked to authorize your MacBook for iTunes:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
    http://support.apple.com/en-us/HT203160
    If you authorize your computer to play your iTunes Store purchases, but you can't play them and iTunes keeps prompting you to authorize, try these suggestions.
    Authorize your purchases from an administrator account
    To authorize your purchases from an administrator account, follow these steps:
    Log in to the administrator account.
    Note: If you don't have access to an administrator password, you'll need to contact the administrator of this computer. If this is a work computer, this may be your IT department.
    Make sure you have the latest version of iTunes installed. You can download the latest version free.
    Choose Store > Authorize Computer.
    Enter your iTunes account name and password.
    Note: If you have multiple accounts, you'll need to log in to the iTunes Store and authorize each account separately.
    Quit iTunes.
    After you've authorized your computer on your administrator account, you'll need to log out and log back in to the user account you'd like to play your purchases from. Once you're logged back in, simply open iTunes, select an iTunes Store purchase in your library, and click Play. The item should begin to play.Authorize using the correct account name
    The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
    Select a purchased song in your library and choose File > Get Info.
    Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
    Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
    If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
    If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.Remove the SC Info folderIf you're still unable to authorize your computer to play your purchases, you may be able to resolve your issue by removing the "SC Info" folder. To do so, follow these steps:
    OS X
    Quit iTunes and any other open applications until only Finder is open.
    Choose Go > Go to Folder.
    Type /Users/Shared/SC Info and click Go.
    If Finder is not already set to column view, set it by choosing View > as Columns.
    Select the SC Info folder and move it to the Trash by choosing File > Move to Trash.
    Restart the computer and open iTunes.
    Authorize your computer to play your purchases. Note: If you have multiple accounts you'll need to authorize your computer for each account. For more information on how to authorize your computer, see this article.
    Last Modified: Dec 16, 2014
    I hope this information helps ....
    - Judy

  • How can I save my data and the date,the time into the same file when I run this VI at different times?

    I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
    2/12/03 16:04 13567
    2/13/03 10:15 35678
    So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

    evolution wrote in message news:<[email protected]>...
    > How can I save my data and the date,the time into the same file when
    > I run this VI at different times?
    >
    > I use a translation stage for the experiment.For each user in the lab
    > the stage position (to start an experiment) is different.I defined one
    > end of the stage as zero. I want to save the position , date and time
    > of the stage with respect to zero.I want all these in one file, nd
    > everytime I run it it should save to the same file, like this:
    > 2/12/03 16:04 13567
    > 2/13/03 10:15 35678
    >
    > So I will track the position from day to day.If naybody helps, I
    > appreciate it.Thanks.
    Hi,
    I know the function "write to spreadsheet file.vi"
    can append the data
    to file. You can use the "concatenate strings" to display the date,
    time as well as data... Hope this help.
    Regards,
    celery

  • After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

    After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

    You need to restore the iPad.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If that will not work, you will need to use Recovery Mode to restore.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    Can you describe what “the operation is failing” means?  What is happening and how is it different than what you expect?
    Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

  • I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

    I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

    Camera Raw plug-in | Supported cameras  I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Different photos with the same file name!! How to change this?

    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?

    Celtic Mom
    Welcome to the Apple user to user discussion forums
    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
    It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
    iPhoto does not care about duplicate file names - it handles it fine
    changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
    What are you doing and what do you want to accomplish?
    Remember do not ever make any changes in the iPhoto library using the finder or any other program
    LN

  • How can I lock the "Vertical Scrolling" in apps that I've created to turn the articles only in horizontal way? Although there aren't articles in the same file this kind of scroll appears.

    Although there aren't articles in the same file this kind of scroll appears.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • Another site already exists at . Delete this site before attempting to create a new site with the same URL

    Hi Everyone,
    It would be great if you can help me with the below.
    Few days ago one of our content db went into suspect mode.  Our DB team had resolved the issue. But one of the sites that was created probably around the same time is no more available. When I try to create a site on the same URL, I get the following
    error.
    Another site already exists at <URL>. Delete this site before attempting to create a new site with the same URL
    When I try to delete the site or if I try to view the details of the site using Central Administration, I can find the site, but it doesn't display any details like Title, DB Name etc.
    If I use stsad -o enumsites command to list ll the site, for the given site I get the following error:
    <nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named <URL>.
    I am not even able to delete it using Powershell.
    Please suggest.
    Thanks,
    Uttkarsh

    You might be dealing with orphaned site. Go through the following blog post and see if it helps you delete the orphaned sites.
    http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=299
    Amit

  • Upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
    I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
    Matt

  • I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

    I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

    The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
    When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
    There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
    Apple's instructions for WDS are here if you want to give it a try.
    http://support.apple.com/kb/HT4262
    It is possible that it might work. Keep us posted on your progress
    Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

  • Following the most recent IOS IPhone update our Iphone calendars, contacts and messages have all merged. This problem has never happened before. We all use the same Itunes account as a family and one AppleID. Does anyone know the cause of this problem?

    We have 4 Iphones. As a family we have happily shared the same ITunes account and one AppleID. After the most recent iPhone IOS update all our contacts and calendars have merged and we randomly receive some messages that one of us has sent to another contact.
    This is causing chaos.
    Can anyone help me with:
    1. Has anyone experienced a similar problem recently?
    2. The records to the individual phones have not been saved been saved separately. After this merging of all the data into one composite record, is there anyway to reverse the change and restore the phones to just their individual records?
    3. I guess that the cause may be the common AppleID. I have tried to create my own AppleID but my personal email address is already linked to the existing AppleID so I am blocked from setting up a separate AppleID in my own name. Does anyone know how I can get around this block?
    4. Would it be better to create a separate Apple ICloud address for each of us as well? How do I do this?
    Many thanks in anticipation,
    Peter

    This is exactly what happens when sharing a single Apple ID for iCloud and iMessage.  Why would you expect any different?

Maybe you are looking for