A plea to those successfully using Comcast 8Mbs service
I just had a Comcast installer tell me that "their modems don't work with Airport". I've seen quite a few postings here and elsewhere that leads me to believe they're just feeding me a line.
To those of you successfully using Comcast 8Mbs service, could you let me know what model Comcast "cable-modem" you have and what Airport settings were needed to make it work? That way, I can walk the installer through his job.
Thanks!
PowerMac G5, dual 1.8GHz Mac OS X (10.4.6)
Wendel48 wrote:
I am glad all is going well for you, Valetlinksys. For many users the new firmware may be what they needed despite the risks. My only complaint was that I did not have a choice about leaving the old firmware. I would not have purchased this router had Cisco disclosed thier master plan and the intrusive Terms of Usage.
Fortunately the old EA3500 firmware is being worked on by creative minds. I think if you follow the progress those of us who are back on the original (non cloud) firmware may have some nice surprises coming
The router didnt actually work for me the 1st time I access the user interface . Patience is a virtue .. and it worked .. I had problems creating the cisco connect cloud account . After creating an account I encountered problems on my other wireless devices , called tech support . They were able to assist me well with my concern even though I was a lil bit irate already but they were able to manage the issue well .
I was a bit disappointed when it ask me to create an account. They were able to explain it to me how it works and what benefits can I get from it .
I believe that I can make it
Similar Messages
-
Is anyone successfully using Mobile Field service - laptop version in 12.2.X ?
We need this type of functionality but we are on 12.0.6. We are considering upgrading but we were going to upgrade later this year. However, we need this type of functionality as soon as possible. Is anyone using Mobile Field Service in 12.2.X with laptops?
Hardik,
I am using an O2 XDA II with Pocket PC 4.2. I am using IAS 9.0.4.0.0.
I have defined a service in my midtier which outputs XML with a signature box:
<SimpleFormItem name="p_signature" type="signature"> etc
My PDA displays the signature box correctly in the web browser.
When I sign the box and press Submit the following data items are returned to the midtier:
Query String: "sigSubmit=mySubmit&sig_width=200&sig_height=100&sig=&personName=tim"
Notice that the sig data is null.
I know that my IAS version is a little low, but, the problem appears to be that the plug-in in the browser is not returning any sig data.
Do I have an old version of the plug-in?
Have you used this plug-in?
Has it worked for you?
Do you know where I can get a newer version of this plug-in as it must work with Oracle Apps?
Regards,
Tim. -
Successful using Java Print Service API on Windows 32 Platform
Hello,
Using the JSP API supplied with JDK1.4, I was able to print successfully the following types of documents :
1. Text
2. GIF, JPG... (images)
3. PostScript files.
But could not print "HTML" files. THe problem is that the HTML files are getting printed as text files with all the HTML tags.
Any pointers are appreciated.
Thanks
TJYou will need to load the html into something that can render html. The printer doesn't know how to do it. It just sees plain text that you are sending. Try using JTextPane or JEditorPane (I think). It can render html files for you. Then just print that component.
1) Create JEditorPane or JTextPane.
2) Set contents of pane as the html file or string you want to print.
3) Use the Graphics2D API to adjust the component coordinate space to the printer coordinate space.
4) Render the component (JEditorPane or JTextPane) on the printer.
There is a very nice tutorial for printing components here: http://www.apl.jhu.edu/~hall/java/Swing-Tutorial/Swing-Tutorial-Printing.html.
Hope this helps. -
Error message sending attachments using Comcast webmail and Safari
I'm using a G3 iMac, with 640MB memory (sorry, can't find the RAM free space), everything is working fine except that just last week, I all of a sudden cannot send attachements through my "comcast message center" webmail using Safari. I spent hours with Comcast, going through different procedures, with no good result. They are convinced it's an "apple problem" but of course I think it's them.
I consistently get an error message "appending message failed" . . . but it's odd because for awhile last week I could not receive or send ANY e-mails (with the same error message), attachments or not, and now it seems I can only send OR receive e-mails with NO attachments. And then this morning, I was able to send several attachments before it went back to the error message again (and I spent another two hours on the phone with Comcast). I opened an account with Mail and (using my Comcast address in a POP account) was able to send all the attachments I could not send through Comcast Message Center.
Hope I gave enough information. Please let me know if you think this is an "Apple problem"
iMac - G3 Mac OS X (10.4.3)I just tried to upload a PDF attachment using Comcast's webmail and was successful. I'd say it's a problem on their end since it's saying "appending message failed." Obviously, they are either not receiving all of the file, or the server just kicks back some message.
I'd say use Mail.app for your webmail if at all possible as it's easier to use and faster to access!
-Ryan -
Has anyone successfully used the ZTE Open C with an AT&T microcell?
I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
Check the Microcell settings.
Check the data connection settings on your FxOS device
Make sure your Microcell is properly connected to WiFi
and check the AT&T support page for more info
For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D -
When I click a link in email from the dock I get "no associated application could be found", however if I used comcast email the link will open.Does anyone know how I can enable the links to open in my apple email account on the dock?
Barney,
I have four groups.
I just typed the name of one of those groups in the To field on the iPhone's email, and received:
Invalid Address
"<group name>" does not appear to be a valid email address. Do you want to send it anyway?
I clicked continue and it remains in my outbox.
Help is appreciated.
Thanks,
Michael -
I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my contacts instead of the addresses stored in my comcast account. How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app. I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity). I wish I could start over!!! thanks.
iPadI could be wrong, but it sounds like Facebook imported to your contacts. I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there. When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies. You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though. Good luck! -
Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't. If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)
Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents. -
The maximum no. of 2nd generation apple tv players that have been successfully used in home sharing mode on a 1gb or 100mb network????
Apple TV is by it self in a category.
With Apple TV 1 the limit was 5 Apple clearly stated that. The reason? Probably because the Apple TV 1 had a hard drive and was able to store content locally (quite a bit actually). This would make it more in line with authorized devices.
You authorized device limit is 5 but this does not pertain to home sharing again something different.
When you play content from an Apple TV you are streaming from an authorized device and as long as you have the same iTunes account on that Apple TV as the iTunes you are connecting to you will be ok.
Now to the error. I have also had this error and I had it on a network with only 1 Apple TV connected and it is since iTunes 11. It seems every time Apple updates iTunes it has a bad effect on Apple TV. So I would not relate this error to the number of Apple TV's you have, every time I get this error I restart the Apple TV and its fine again.
On a side not I used to run MANY Apple TV's off my xserver. I had my families homes networked with VPN. I would prefer to not say how many but it was quite a few. biggest problem there was multicast over VPN....whole other story. -
Important News For Those Who Use Hulu And Other Flash Video Websites.
Adobe will release the next update to the Adobe Flash software in the next few weeks and that update will bring better GPU video decoding acceleration for Windows if you have recent graphics hardware from ATI, Nvidia, or Intel. This update is VERY important for those who use laptops which have less powerful processors and hardware than desktops usually do. In order to take advantage of this update when it comes out, you MUST have the latest graphics cards drivers for your hardware. ATI, Nvidia, and Intel will all be releasing new drivers specifically for the updated Flash software so keep an eye on the respective websites for your graphics hardware maker. Of those companies, only Intel and Nvidia have drivers available for testing at the moment, but ATI is not far behind.
You may be able to disable Flash entirely and just use HTML 5 video codecs to view the videos this is faster but you may lose access to some videos such as ones that have mandatory advertisements.
-
Nyone who had success using sign-encrypt policy(oracle web service manager)
Hi All,
I could not succeed in using sign Message and Encrypt and decrypt and verify signature policy using oracle web services manager.So I would be grateful if somebody who had success in using it would shed light on its use.
Basically,I am using the following policy steps in securing a helloworld web service using gateway(oracle web services manager) :
1)for Request (Decrypt and Verify signature).
2)for Response(Sign Message and Encrypt).
The configuration for Request is shown below:
Pipeline "Request"
Pipeline Steps:
Start Pipeline
Log
Decrypt and Verify Signature
Basic Properties Type Default Value
Enabled (*) boolean true true
XML Decryption Properties Type Default Value
Decryptor''s keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Decrypt Keystore Type (*) string jks jks
Decryptor''s keystore password string *******
Decryptor''s private-key alias (*) string s1as
Decryptor''s private-key password string *******
Enforce Encryption (*) boolean true true
XML Signature Verification Properties Type Default Value
Verifying Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Verifying Keystore type (*) string jks jks
Verifying Keystore password string *******
Signer''s public-key alias (*) string xws-security-client
Enforce Signing (*) boolean true true
End Pipeline
And the configuration for Response is shown below:
Pipeline "Response"
Pipeline Steps:
Start Pipeline
Log
Sign Message and Encrypt
Basic Properties Type Default Value
Enabled (*) boolean true true
Signing Properties Type Default Value
Signing Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Signing Keystore Type (*) string jks jks
Signing Keystore password string *******
Signer''s private-key alias (*) string s1as
Signer''s private-key password string *******
Signed Content (*) string BODY BODY
Sign XPATH Expression string
Sign XML Namespace string[]
Encryption Properties Type Default Value
Encryption Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Encrypt Keystore Type (*) string jks jks
Encryption Keystore password string *******
Decryptor''s public-key alias (*) string xws-security-client
Encrypted Content (*) string BODY BODY
Encrypt XPATH Expression string
Encrypt XML Namespace string[]
End Pipeline
But I am getting the following fault exception while accessing this secure web service :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode "http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode>
<faultstring>Step execution failed with an exception
</faultstring>
<detail></detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I would appreciate your help.Thanks.
KashHi clemens,
Actually I installed OracleWebServices_Manager_4_0_3 and I see my installation directory does not contain any of the directory structure you mention.
It installed oracle web services manager in the following location:
C:\coresv_install_home
and it contains the following subdirectories:
1)bin
2)config
3)db
4)ears
5)external
6)extlicences
7)lib
8)samples
9)scripts
10)wars
So I like to ask did you install the same version of the oracle web services manager, if not which version you install in which security is working for you.Thanks for any help.
Kash -
I'm trying to upgrade WordGem on my IPad with no success using my I tune account. The problem is the tow security questions which I haven't done before.
Hi there Nabila Bakry!
It sounds like you may need to reset your security questions. This can be done by following the instructions in this article:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
If I delete an email on my iPad it is not deleted on my macro. I wonder if anyone knows how to delete on one device and have the deletion concurrently work on the other device I use Comcast e mail.
MikeBenton
Jan 19, 2014 6:40 AM
Had problems sending emails from my iphone and ipad through Comcast. Apple could not solve the problem, contacted Comcast and they stated that they had issues with the Apple iphone and ipad and told me to download the "Xfinity connect ap" did so and everything works better than before. When I used the Apple email had to trash what I did not want on Apple and then when I went to Comcast the email were still there. Using the xfinity ap, when I delete on the iphone or the ipad the emails are deleted at all places. Before I had to delete on my iphone and then my ipad and then when i went to my computer they were still there and I had to delete there also, which was a real pain. Still can send and rec email from my icloud account, but comcast email are handled through xfinity connect
iMac, Mac OS X (10.7.4)
I have this question too (0)
Reply
Tags: none (add) -
2012 R2 DA, and clients using Comcast IPv6
I have not had the chance to troubleshoot this issue but I strongly suspect that clients using Comcast which is now giving out routing working ipv6 addresses are failing to connect because of it. Has anyone else experienced the same?
Hi
I 've seen this article too, but there are otherones which tell the
opposite - like this one here:
Windows 7 null encryption - yes we can
So I'm not sure what's realy matters
Best regards - Bueschu
Bueschu
But if you read further into the article Jason Jones states. "Hmmm, ok - it appears I was wrong and the IP-HTTPS enhancements are
not applicable to Win7 clients."
Teredo is still the best technology for Windows 7 Clients. if you can install you DA service in Edge mode then the Win 7 clients will benefit.
Regards, Rmknight
Maybe you are looking for
-
iBooks will not open only the icon is there when I go to App Store to download it just says open like it is already there !! Help please this is my first ipad but have always used apple products
-
Adobe Reader 9 won't work, & freezes computer if opened!
I have Windows 7. Found that I couldn't open a PDF document. Went to open Adobe ---blank window appeared with red box in middle, & whole computer froze. Had to shut down. Recommendations? --- Thanks --- CORY7.
-
1z0-051 Certification - Advice Needed
Hello Guys, I have been reading, learning and practicing Oracle 11g SQL Fundamentals for the last 3 months and finally ready to take up the Exam 1z0-051 by October 15th 2009. The only book I used: OCA Oracle Database 11g SQL Fundamentals I Exam Guide
-
I need a procedure to check my installation of Tomcat 4.0.3 and it¹s integration with apache. I was told I need mod_jk, but I can¹t find it even in the source files of tomcat. Any word on where I can find it? Any procedu
-
This is occuring on DRM ebooks. The vendor where I purchased has reset the licenses and I have authorized my computer. Please help...I need to download these books asap. Thanks!