A portion of audio that is synced in iMovie, is out of sync when burned with iDVD. How can I avoid this?
I'm trying to burn a simple movie, using iMovie and finishing in iDVD. A portion of the audio is out of sync when burned, despite it being in sync in iMovie. Any suggestions?
Thanks.
Hi
Try to - Save as a DiskImage - then test this with Apple DVD-tool.
Does this play OK - burn this DiskImage by using Disk Util tool.
Set down burn speed to x2 or 4
Yours Bengt W
Similar Messages
-
we got 2 new iphones one for me and one for my mom i synced mine and it backed up, when i did my moms first sync everything got wiped out and it turned into my phone how can i undo this there is no back up except mine ios 5.0.1 iphone
I have 3 iPhones and 3 iPod syncing without problems on one computer.
Go to Settings > General > Reset > Reset All Settings.
On your mum's iPhone go to Settings > General > About > Name - put in your mum's name so that iTunes can tell them apart. -
I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?
I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?
Skipping songs
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2 -
I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?
Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.
-
When I try to update my iTunes, it tells me that I have the latest version, but I only have 10.6.3 - how can I override this?
I'm sorry but your post seems vague as to exactly what version of what you are running, therefore, it comes as a surprise that you mention that "it" won't let you update iTunes. Did you run Software Update or try updating from within iTunes?
If you are running a Mac under Mac OS X 10.6.3, then if you should be able to update that by using System Update to version 10.6.8 - first and foremost.
Then, assuming you can run Mac OS X 10.6.8; I would think that you can (secondarily) update iTunes to Version 10.7 or Ver. 11.0.5.; IMHO 10.7 is better as it has Coverflow. Nonetheless...
Regards -
I pay to get music from Kazaa which uses a WMA format, when I try to add it to my Itunes it says that the songs is from a WMA format and Itunes uses AAC format, how can I get this music to my Itunes to put on my I-pod/
By converting the WMA files to AAC formatted files.
-
Stockbroker states that "invalid session" message is due to brownser how can I avoid this?
I tried to cover a short sale while trading online. Could not execute the trade. Got a message in red "invalid session". Broker tech support stated that it was not their software, it was cause by the browser, Firefoz 5.0 running on Windows XP. How can I avoid this?
That is not very easy to answer, because the cause of the corruption is unknown.<br />
In severe cases you may even need to delete the file cookies.sqlite that stores the cookies.<br />
There is also a possibility that security software or cleanup software is causing such problems.
If you've never seen it before then it may not happen again, but it is not that difficult to remove the cookies in such a case.
See also:
*https://support.mozilla.com/kb/Clear+Recent+History -
I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve thisHi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I cannot drag the items in my ipod that were not purchased on itunes (they were added from a CD) into my itunes library or playlists. How can I fix this?
You can only transfer music from itunes to your devices and not the other way round.
-
I have been unable to sync my phone with itunes - how can I fix this?
When I link into itunes, I am told that my phone is not registered. I have had my phone for less than 6 months. It worked through the itunes up until May and then I was unable to get it to connect to sync with itunes. I am able to buy products but not share with my other devices. How do I fix this?
The actual error message reads : This Iphone can non be used because the Apple mobile device sevice is not started.
-
I have set up a Slideshow on iDVD with the intention of adding a narrative and burning a dvd, so a friend of mine who can neither read nor write will be able to watch the pictures while listening to the narrative. I have produced a narrative by using the Male Vocal track on Garageband, but when I try to drop the result into the Audio box at the base of the Slideshow Edit Window, it won't take. I know that only certain types of audio will work, but I thought Garageband would do the job.
If I can't do it that way, how can I make a suitable narrative without putting it separately onto a cassette tape?
Using an iBook G4, running OSX 10.4.11– the latest system I can run.Save the Garageband track as an aiff or mp3 file and use that.
OT -
Every time I go to sync my ipad 2 to my pc it loses everything and has to be restored again. What is the cause of this? How can I stop it from happening.
Hi,
Try restoring as a new device. Help here.
Carolyn -
I find the term 'sync' maddeningly imprecise and iTunes frustratingly counter-intuitive. So here's the situation: iPhone calendar - bulging; Outlook calendar - zilch. I want to back up FROM iPhone TO PC. Last time I tried this it seems the blank Outlook calendar over-wrote my iPhone calendar. Result - tears before bedtime.
Also I keep getting the message: 'The information on the iPhone... is synced with another user account. Do you want to sync this iPhone with the information from this user account instead?' (What is a 'user account'? How can I find out what the iPhone was previously synced with? And does it matter?).
It then asks whether I want to 'Merge Info' or 'Replace Info', with a button provided for each of these choices.
Thus there are three questions, with buttons capable of answering only the last two. How do I indicate 'no' to question number one?
I'm totally confused and scared stiff of losing everything on my iPhone calendar. At present I am accepting the possible loss of my iPhone as being a lesser risk than my failure to understand these incomprehensible instructions and make the wrong choice.
Can anyone help, please?It doesn't matter if your password isn't working. you can change Apple ID here
-
I have images that are embedded, but I want to link to an exernal image instead - how can I do this?
I have an illustrator CS5 document, and somehow a few images were embedded, rather than linked to. I need them to be linked and not embedded. How can I change them?
Option1 (You have files for the umbedded imaegs you can link to)
In links panel select the embedded image that has an embedded icon.
Click on relink button on bottom left of palette. Make sure link is checked before you choose place.
This will hold scaling & positioning so you need not manually size and positon each one.
Option 2 (Image embedded no original file)
CS6 cloud has an unembed command you can use. Otherwise copy and paste this into Photoshop, (try to guess the resolution eg: 300dpi) save a file, and then use the method above. This will hold your scaling and position.
Obviouslty the first method is upreferred. With the second method you will have to look at the image in Phothsop at 100% for softness, to determine if the orignal embedded image was atleast 300dpi. -
After setting up an "Exchange" mail account on my device, iPad/iPhone, it requires a new passcode to be set before data will be downloaded. I did this on the iPad and now have to enter that passcode everytime I turn it on. How do I avoid needing to enter a passcode on my iPhone everytime I turn it on?
The passcode is a requirement set by the administrator of the Exchange server you are connecting to.
It is purely for security purposes.
If you do not want the passcode, you must remove the Exchange account. There is no way around it.
Maybe you are looking for
-
Short dump Error during VM container communication between ABAP and JAVA.
Hello All, Can anybody please help with resolving the following issue: Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly. When I try to insert ECC mi
-
I haven't been able to use itunes for months. I can't get itunes to open on my pc. I recently got a new ipod and I really want to copy some music from cd's. I've tried uninstalling/installing itunes, quicktime. This shouldn't be this hard...shoul
-
TREE - Built Only on Tables/Views Found in Application Schemas
Problem When creating a "TREE" region using the wizard it prompts for a "schema name". The problem is that the table/view I would like to build a "TREE" on does not exist in the schemas listed by the wizard. Only the schemas that are associated with
-
Im having issues with cds not reading on my computer. trying to load into itunes but the imac doesnt seem to read them. It just ejects them.
-
Calling PL/SQL code from Select statement
Hi I have a PL/SQL function to calculate a value. create or replace procedure "SR_GROSS_MARGIN" (netsales IN NUMBER, margin IN NUMBER, GM OUT NUMBER) is BEGIN IF NETSALES = 0 THEN GM := 0; ELSIF NETSALES < 0 THEN GM := 0;