A possible bug: Error when creating a new appointment
Hi,
When a new appointment is created, CRM OD shows two default values for the "Inicial Hour" and "End Hour" fields, if there aren't a difference around four hours, this new appointment is an ended task and not an open task.
Is it a bug?
When the appointment exceedes the date / time to finish, it becomes complete. This a normal behavior.
But the problem is that if you add a new appointment with the system time below the present by the default value (Start Time and End Time) from CRM OD, goes directly to be completed when an appointment should still be open.
Similar Messages
-
Runtime Error when creating a new group
I'm getting a runtime error when creating a new group on a site collection?
Thanks in advanceThe most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar -
Can't adjust the default time scale when creating a new appointment in Outlook 2010
Good Afternoon, I have found a question on these community boards that propose an issue that I am currently experiencing. The answer; however, was not the solution for me. I used the same name as the original post and will add the original text as it is
exactly what I am experiencing.
"When creating a new appointment in the month view Outlook 2010, the default time scale or duration is 2 days. I tried resetting the view, adjusting the time scale, and creating a new profile. It only seems to happen when creating the appointment
in the Month view. ??? Day and week view work fine and appointment can be created w the standard 30 minute time scale. But the time scale in the month view although says 30 mins, it creates appointments in 2 day durations."
This is exactly what happens to the user I am assisting. When in "month view" double clicking the day will bring up a new appointment with the times within the same day. If you click the "new appointment" button in the ribbon it
sets the end time to the following day. This only happens in the month view every other view works as it normally should. I have tried it several times being sure multiple days are not selected. It still gives me an end time for the following day. I have reset
the view, changed the time scale but nothing seems to bring it back to the default same day appointment. Any ideas?
Thanks for any assistance you can provide.It is a default in Outlook 2010 in month view. The "time scale" selection is greyed out. Very frustrating. Everytime I select "New Appointment," a duration of 1 day is automatically selected; midnight to midnight. I end up doing
most appointments twice because I forget to change to end date back to the day of the appointment. "New meeting Request" works fine. So does "New All Day Event" when you deselect "All Day Event." I can't see how this default behavior
provides optimal results under any circumstances. Very frustrating. -
Approval workflow error when creating a new custom entity in FIM 2010 R2
Hello,
i'm hoping somebody here can help, me i've been struggling with this for some time now. On a fresh FIM installation i create a custom entity named "Role" and add a few custom attributes.
I then create an approval workflow and MPR for normal users to create entities of type Role, but another user must approve this request. The other user has a working mailbox - i've tried firing an action workflow that sends a mail notification when someone
creates a new role and it is working fine. But, when i enable my approval workflow (the only field i changed from default is the approver) on the MPR, the workflow always failes with the message:
Error processing your request: The operation was rejected because of access control policies.
Reason: The server workflow rejected the operation.
Attributes:
Correlation Id: 750a558a-d3e4-4216-b16a-e76d79f011ec
Request Id: feaabbc9-dea4-49a3-8b29-65b77de6f8fd
Details: The Workflow Instance '04202cc0-14a3-410c-a3fc-2d6e5d25ebe6' encountered an internal error during processing. Contact your system administrator for more information.
I enabled tracing and this is what i found:
Microsoft.ResourceManagement Verbose: 0 : Creating WorkflowServiceHost for XOML Definition:\n<ns0:SequentialWorkflow ActorId="00000000-0000-0000-0000-000000000000" RequestId="00000000-0000-0000-0000-000000000000" x:Name="SequentialWorkflow"
TargetId="00000000-0000-0000-0000-000000000000" WorkflowDefinitionId="00000000-0000-0000-0000-000000000000" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:ns1="clr-namespace:System.Workflow.Activities;Assembly=System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856
ThreadId=8
DateTime=2013-09-04T15:17:10.0496188Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid Element 'ReceiveActivity.WorkflowServiceAttributes' found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
ThreadId=8
DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid data found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
ThreadId=8
DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Verbose: 0 : A WorkflowRuntime is not available for this WorkflowDefinitionVersionKey '20'.
ThreadId=8
DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Error: 3 : Workflow host activation failed for workflow definition id : 231457c6-d044-4cc7-839f-98e5cf88f514, version key: 20. Exception: Object reference not set to an instance of an object. at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.ActivateHost(ResourceManagementWorkflowDefinition
workflowDefinition, Boolean suspendWorkflowStartupAndTimerOperations)
at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.RetrieveWorkflowDataForHostActivator()
ThreadId=8
DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : The service has updated the list of active hosted workflow definitions to sequence number '1'.
This happened on two separate FIM deployments, but both of them were set up in the same way. What am i missing here?
Thank you,
Martin(...) What am i missing here? (...) - Sharepoint 2013 and probable bug in FIM related to it. Check this thread for workaround
and resolution:
http://social.technet.microsoft.com/Forums/en-US/1b76672d-1276-4c71-b9fc-5bb1fcb36877/event-id-3-with-approval-activity?forum=ilm2
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl -
Error when creating a new JMS connection factory in GlassFish V3 b57
When I use the admin console and try to create a new JMS connection factory in GlassFish V3 b57, the operation fails with the error message
An error has occurred: Can't find ConfigModel.Property for attr -connection-validation-required on interface com.sun.enterprise.config.serverbeans.ConnectorConnectionPool
Should I better report this in the GlassFish news forum (http://forums.java.net/jive/forum.jspa?forumID=56&start=0)?
p.s. I launch the admin console from within NetBeans 6.7.1 (the server started before the IDE). WIth version b 56, creating a JMS connection factory worked fine.
Best regards,
Michael JustinThis bug does not apear in the nightly build (b58) now so everything looks fine again.
Greetings,
Michael -
Error when creating a new Organization in Deployment Manager
I am trying to create a new Organization to an existing CRM environment and I keep getting the error below. The user deploying the new Organization has full control on all the security groups and Admin rights on the servers that Host SQL and CRM
application. The CRM environment is 2011 on Premise that has been setup for IFD.
We currently have 2 other organizations that are already in the environment, so the new org would be a third. I am more than glad to provide any firther information that I have to anyone that can help us resolve this issue. I also have a log file that I
saved after the failed creation attempt. I can provide the contents of the log file to anyoen who can help. Its too long to add here.
The section of the log file that shows the error is just above the screen shot. It looks like a deletion error. My queston is why is there an attempt at deleting anything if all I am trying to do is create a new Organization. This is not an import or
upgrade.
15:03:16| Error| System.Exception: Action Microsoft.Crm.Tools.Admin.ImportDefaultDataAction failed. ---> Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: delete from [ConnectionRoleObjectTypeCodeBase]
OUTPUT DELETED.[ConnectionRoleObjectTypeCodeId], 3233
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([ConnectionRoleObjectTypeCodeId] = '952fda76-2f70-e411-bfa3-005056b10f95')Hi All,
I am also getting similar error
Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query:
delete from [CustomerAddressBase]
OUTPUT DELETED.[CustomerAddressId], 1071
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([CustomerAddressId] = 'fbb57633-a54f-e411-80ca-005056947598')
I am getting this error when I am trying to delete all existing customer address and then try to create a new address for a customer.
So its a kind of blanket update to all existing one replaced with new one.
Please let me know if any one having solution to this -
Error when creating a new project in sharepoint
I am getting this error "Failed to create site. A duplicate field name "workflow_history" was found" when I am creating a new project on share point.
Can someone help me identify and fix this issue exactly.Check if below helps
http://zimmergren.net/technical/sp-2013-duplicate-field-name-was-found-after-upgrading-your-sharepoint-2010-solutions
http://jshidell.com/tag/finding-a-duplicate-field-name-was-found-error-in-sharepoint-2010/
http://www.sharepointassist.com/2011/11/05/a-duplicate-field-name-x-was-found/ -
Error when create a new Project
Hi all
When I create a new Project, system appear:
"No settlement rule exists for object number PD00000035
Message no. KD023
Diagnosis
There is no settlement rule for object PD00000035.
Procedure
Please enter an object for which there is a settlement rule."
Could you please tell me about this error and how to repair.
Regards,
ThangMaintain settlement rule for the object. It seems as per the settlement profile, settlement is mandatory.
Select object in CJ20N and press CTRL+F3...maintain the distribution rule.
Venkat -
Error when creating a new Data Source
All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
RThe schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM -
Error when creating a new user_id
Hi, i am using this code to create a new user
begin
fnd_user_pkg.createuser
(x_user_name => 'myappuser',
x_owner => 'CUST',
x_unencrypted_password => 'genius2011',
x_start_date => sysdate,
x_end_date => NULL,
x_description => null,
x_password_date => sysdate,
x_password_lifespan_days => 45,
x_email_address => null,
x_employee_id => 1336
end;
in deed, the user_name is new and the employee_id has no user.
i got a warning message: "the user name is already in use" and when i try to save a new user name with the user definition form i got this message "APP-FND-01206: This record already exists. You have entered a duplicate value or sequence of values that must be unique for every record be unique"could you please take a look
Error que empieza en la línea 1 del comando:
begin
fnd_user_pkg.createuser
(x_user_name => 'ADRIANA.GARCIAC',
x_owner => 'CUST',
x_unencrypted_password => 'welcome1',
x_start_date => sysdate,
x_end_date => NULL,
x_description => null,
x_password_date => sysdate,
x_password_lifespan_days => 45,
x_email_address => null,
x_employee_id => 13366
end;
Informe de error:
ORA-20001: APP-FND-02600: Unable to create user ADRIANA.GARCIAC due to the following reason(s):
This user name is already in use. Please enter a unique user name..
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 1150
ORA-06512: at "APPS.FND_USER_PKG", line 1196
ORA-06512: at "APPS.FND_USER_PKG", line 1315
ORA-06512: at line 2
i searched ADRIANA.GARCIAC in EBS users , it does not exist.
now, I think the FND_USER_PKG is corrupted
Edited by: jbaltodano on Aug 7, 2011 10:00 AM -
Error when creating a new user
Hi all
When I try to create a new user I'm getting an error message Unknown message (ID = LOWERCASE_REQUIRED)
I entered all the required fields in the way it was defined and still I get this error.
I never had this problem before. Can anyone please help me with this issue.
Thanks
regards
LukeHi
Go to visual admin >> services >> UME Provider >> check the property default value is for ume.logon.security_policy.userid_lowercase
Hope it solve the problem
Cheers
Jawahar Govindaraj
PS:Reward pts -
User getting error when creating a new Document Library
The user is getting the following error when trying to create a new Document Library in SharePoint 2010:
Error
Cannot complete this action.
Please try again.
Correlation ID: 37ecd5eb-6129-4fa3-84bd-c6f0ad8115d5
Has anyone come across this error and know how to resolve it?Hi,
According to your post, my understanding is that the user could not create a document library.
To narrow down whether the issue is related to the user permission, you can check which permission the user has.
You can also assign the user full control to check whether it works.
What’s more, did the issue occur in other sites? You can check with other sites or create a new site to check whether it works. Maybe the site has been corrupted.
To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Error When creating a new Global Calculated Key Figure or RKF
Hi,
Coming across this problem with NW2004s BI 7 query designer. When i create a new CKF or RKF with the query designer, i get a error message.
Currently the SAP GUI is on SP 8 and the problem exists after applying the collective note recently released.
Rgds
Dinesh
Message was edited by: Dinesh MukunduAlso, make sure you've got all your frontend patches configured correctly as outlined here:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation -
Error when creating a new Portfolio
Hi guys,
When I try to create a new Portfolio, I get the following error message:
"The value of the mandatory input field Portfolio Type is initial"
This error occurs in spite of the field being populated with a valid Portfolio Type.
Can anyone advise what is causing this error, please?
Regards,
Richard CookHi Richard,
I have never seen this error. Are you using a custom portfolio type or one that is configured in PPM by default (ADM, IT...) ?
Check this using for example ADM .....but realy your issue it is very extrange,
Other thing you can do is create the protfolio using transaction RPM_DX_PORTFOLIO.
I hope this can be useful
Regards,
Sara -
Error when creating a new mailbox.
When I try to create a new mailbox I get the following error. Forest1.net is my domain name. exuser is the name of the new user account.
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
exuser
Failed
Error:
Load balancing failed to find a valid mailbox database.
Exchange Management Shell command attempted:
New-Mailbox -Name 'exuser' -Alias 'exuser' -UserPrincipalName '[email protected]' -SamAccountName 'exuser' -FirstName 'ex' -Initials '' -LastName 'user' -Password 'System.Security.SecureString' -ResetPasswordOnNextLogon $false
Elapsed Time: 00:00:01
Thanks and Regards, RadhakrishnanHi ,
Please verify the Information Store service is started.
Distribution Group and contacts both have no mailbox in information store. So you can create them.
And now, we may need to verify if the mailbox database is mounted and we can get its information.
The following similar issue for your reference.
Cannot execute Get-MailboxDatabase cmdlet:<//span>
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/a8022f91-5f91-4660-80d0-ac6d98cd787a/
By the way, do you choose which mailbox database you want to store when create mailbox ?
Wendy Liu
TechNet Community Support
Maybe you are looking for
-
How can i use labview for notebook
i want to know spec of notebook for install labview programm. thank you vermuch. sattaya
-
I hope this is already a known issue. I use Safari on Mac OS X. In my flex application, I have problem with full-screen mode. When I get back to normal mode from full-screen mode, and then resize or maximize safari window, the screen displays abnorma
-
Spry menu showing up incorrectly IE6
Hi there, My spry menu horizontal bar is showing up incorrectly in IE6.... The buttons are meant to be maroon during hover, but they're all the default blue, sometimes when you hover over them they turn pink, sometimes blue, sometimes completely gray
-
Numbers of mappings and dimensions and tables in a module
Is there a practical number of dimensions, mappings, tables that can safely be put into a module? I only ask because I had a module with a mapping that was corrupt with the RTC-5161 Error and I had to create a new module and copy over and recreate so
-
I have the Indesign CS4 creative suite and have experienced crashes after working in program and have been able to reinstall the software but I need to know why it crashes.