A possible fix for the dreaded vista/xtremeMusic/nforce 4 probl

Would a solution to the Vista x64 / xtreme music / nforce 4 chipset be to just get an "xtreme gamer" card instead? Every time I read about the popping issue and Vista, it's always someone with an xtreme music card.
OR: is Creative going to release better drivers for Vista that give us the same compatibility and features of xp?
What does everyone think?
NOTE: I did not have this problem with xp x64.
A-bit KN8 ultra (nforce 4)
AMD 3800 x2
2x GB DDR2
evga 7800GTX
dead onboard realtek sound
x-fi xtreme music (popping! crackling!)
Vista ultimate x64/SUSE Linux 0. (waiting on those linux drivers...)Message Edited by epsilon72 on 03-5-2007:58 AM
Message Edited by epsilon72 on 03-5-20070:2 PM

I don't think so - every time I run a "x-fi vista popping crackling problems" search in google and get forum hits, WITHOUT FAIL the person with the problem has an xtreme music card. I'm starting to think it's a defect/incompatibility between that card and AMD (mostly nforce 4 chipset) motherboards.
I think I'll try an xtreme gamer from Worst Buy to see if it has any compatibility problems, and then return it after I'm able to test it. If there's no problems, I'll place an order with newegg

Similar Messages

A possible fix for the email "large attachment cra...

08, v1507, FP2, UK product code (hacked from original amazon.co.uk Malaysian product code).
I've just started Nokia Suite to see if anything new comes up.
No sign of 1508 but one "really interesting" fix for the email app, specifically mentioning the "large attachment" bug. It isn't easy to reproduce because it doesn't happen all the time, even with the 10MB pics from Camera Pro on max jpeg quality settings, but it is good that Nokia (Accenture actually) are still out there reading the forums and fixing stuff...
No news of any HSPA fixes.
The attachment fix seems to work but they have now imposed a hard limit on email size of 15.36MB, which is way below what the previous email app was capable of sending sometimes - I have tested up to 50MB on the 700 and the 808.

Well... they haven't completely fixed it. This morning, doing some tests (of something else) which involved emailing 2-4 images as attachments (total size under 10MB) the email app crashed a few times. As before, the crash results in the email being dropped into the Drafts folder.

Possible Fix for the 3.1.1 app crash problem

THIS IS A POSSIBLE FIX ONLY!!!
So like many of you I upgraded to 3.1.1 and after the update all of my apps would no longer work. They contiually crashed to the home screen when I tried to open them. I tried downloading random new apps, deleting all my apps and re-installing them with no luck. I tried reseting the iPod and even restoring it through iTunes. I also tried de-authorizing and re-authorizing my computer. None of these things worked for me. Today I tried to go back to the 2.2.1 update (which is the only one I could find that would download) when I tried to upload that onto my iPod I got an error #20 so I ended up restoring back to 3.1.1 the only difference was i told iTunes to start my iPod as a new one instead of loading it from a backup. This actually worked, the only downside was I lost my favourited websites and all the saved info in my apps but hey, atleast they work.
So long story short try wiping your iPod clean and restoring as a brand new one with the 3.1.1 and it might just just work.

I just purchased the 64GB iPod touch and it had the same issues from the start. While I had the same issue with the apps I also had intermittent problems with movies not working. I reset the entire iPod touch 64gb and re-synced as 'new' (described earlier) and it is working for now. I am planning on loading some new apps and movies and re-syncing to see if it stays working.
Also, I upgraded from 3.1.1 to 3.1.2 and everything stopped working again. I am staying on 3.1.1 as long as this solution keeps working until I see something from Apple addressing this issue.
Apple usually does a better job with their software. I am hoping that this is only a software issue and not a hardware issue.

WHY is there no fix for the dreaded black box installer for me?

I have searched this forum for days and see my issue with either no replies, or the ones with replies do not work.
I have a new PC win7. I am running IE11 and FF34.0.5. So far I hate my new PC.
Anyway, I have tried in both browsers all diff ways of installing from the many hints I have come across and still get the black box that hangs. If I click on it a few times - sometimes - it takes me to the browser page and says "server not found."
BTW, in IE addons, flash is not listed so I cannot enable it like so many hints have said to do. If it was that easy, I would not be here looking for help!
FF also does not have flash listed nor when I look for new addons is it an option!
At this point I am keeping my old pc to do certain things like plays games, etc. This is ridiculous though!
I also see there is no phone number and no tech support outside of this forum, yet we at the mercy of Adobe Flash. This is really not cool.
So I implore you, Adobe, can you please tell us how to fix this???

Hello,
We are aware if the 'black box' issue with the shim installer (downloaded from get.adobe.com/flashplayer), however, this should not be the case with the full installer. The links for the full installers are posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

A possible fix for the non-installing applications on the iPod touch

Here's what martinlondon posted in another thread...it worked for me! Turn ON the auto sync in your music tab, and the applications seem to load! You might lose your manually managed music on the iPod, but I didn't as it wouldn't sync up my music as there was too much in my library to FIT on my 8 GB iPod touch...
Here's what he posted:
A hint for anyone with this problem: I found a comment on a thread at theregister.co.uk suggesting that the problem was that you need to have automatic sync turned on to enable the new applications; manually managing your music doesn't work. I'm guessing a lot of people manually manage as their music collection is bigger than their Touch, including me...
If you switch it on and sync, the new apps install like a charm. The downside is you lose all of your painstakingly manually copied music/movies on the iPod, so you have to switch back to manual syncing and copy them all across again. But this is a way to get it installed.
I happened to be on the phone to the support team earlier today (Touch support is handled through the same team as desktop support apparently, and I had a Leopard upgrade issue) and they didn't know the cause or solution.
Have to say that Apple's QA department don't seem to have covered themselves with glory here...

manual syncing was never checked for me, so 'autosyncing' didn't fix the problem. I wish it did.

Possible Fix for the Random Shutdown Issue

One of the readers at MacFixit was able too find a solution to his RSD Macbook. He discovered when he removed the top case (they keyboard) off his machine, the Macbook worked fine. After further investigation, he found out that the top case and the heat sync seem to touch each other while the machine is closed (generating more heat). To fix the RSD he put kapton tape on the top case (to separate the heat sync and the top case) and on the track pad cable. Not only did it fix the RSD problem, another plus it causes the computer to run cooler.
So it appears what Apple needs to do is, either put Kapton tape on the top case, or move some the thermal grease from the processor too the top case. Another easy fix might be just to send out new top cases (since only a significant minority are effected by this problem, their might just be a set of bad cases out their).
Before you decide to open up your machine and put on Kapton tape on your machine, keep this in mind, it will void your warranty.
http://www.macfixit.com/article.php?story=20060821101232169
Macbook Mac OS X (10.4.7)

Holding down the power button until it beeps is still the only way that I can get my machine to boot up fully and become operational. I was starting to think that I was crazy after reading above that all it did was to remind me that my finger was still on the power button. I've had my husband and my son watch this process just to convince myself I wasn't crazy.
I've been deleting software, going through log files, making other changes to make sure that they weren't interfering with the machine working. I shut the machine off this morning to go do something else. When I turned it on again I forgot to hold the power button until I heard the beep. After I logged in, I realized that I hadn't done that and that the machine had actually gone through the complete boot cycle and login. I thought "wow, maybe I fixed it. Maybe it was something software related." I waited for a few minutes to make sure that everything that it had to do in its start up was finished before I did anything thinking "well maybe its just that I try to do too many things too quickly, and it is operator error and my fault I've been having this problem". Then I went to open Safari and "blink" the machine went dead.
Then I put my finger on the power button until it beeped to start it up a second time. I've been working on it for six hours now. It's gone to sleep while I've been on the phone, I've woken it up with a short press of the power button and logged in a few times today.....not one single problem in 6 hours.
It's crazy. I don't know what holding the power button for that long does but it must be resetting or otherwise doing something that causes it to override whatever problem was causing it to just shut down by itself. I love everything else about this MacBook. I don't want to have someone start taking it apart and putting it back together again. If the fix is just remembering to "hold power until it beeps" I"ll live with it.

Has there been a fix for the dreaded kernel_task eating up all CPU problem yet???

Since I bought this pile of garbage in 2011 and went overseas I've been struggling with it. This kernel_task issue is completely insane and a lot of pepole experience it as well, so has Apple released a fix or has anyone figured out a proper way to get rid of it?

I have this same issue on my iMac after an upgrade. My girlfriend's iMac (same model) was unaffected. So the problem seems to affect random machines of all ages and types. I have a solution but not a fun one.
@ScottC75 : The CPU percentage shows what % of an individual core is being used. If you have a multi-core chip (which most Macs do) this can go above 100%
I've read *a lot* of forums on this kernel_task problem with people spouting quite a lot of rubbish.
I first tried everything listed on forums: reinstalling OS X, removing kexts (that apparently stop your computer from overheating), new RAM, tidying up the computer. None of it worked.
One guy said he took three trips to the Apple Store, having his MBP sent off each time; eventually they gave him a brand new MBP of the latest spec. That might be the option for you but I didn't want to be without my computer for that time.
Finally, I did a complete wipe of my Mac. If you boot using the backup partition, or using a USB with an OS X Install on it, the option to 'reinstall' or 'install a new OS X' does not wipe your computer. Once it has finished, you will have all your files and applications still. This did not fix my computer. Instead, you must use Disk Utility first to wipe you Macintosh HD partition and then install. Then you Mac acts like it's brand new. Only this fixed the problem. The massive downside is that I had to backup everything and reinstall all my apps.
This is a drastic measure, and you run the risk of forgetting to backup all the stuff you want. It did work though and was ultimately quicker than going to the Apple Store (even if I might have got a new computer out of it).
In summary, to fix this problem:
1. I backed up all my files onto an external hard drive!
2. I booted up to the recovery screen (Command + R or hold the option key at bootup)
2. In Disk Utility, I 'erased' my 'Macintosh HD' partition
4. Back on the main recovery screen, I chose to (Re)install OS X.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Is there an absolute fix for the The Snow Leopard Pixelated (Fuzzy) Icon Bug?

Is there an absolute fix for the The Snow Leopard Pixelated (Fuzzy) Icon Bug?

I've never even seen such a thing in SL. That said, it's pretty difficult to understand this so called "bug" without some sort of reference. Do you have a screen shot you could post?
Edit: Never mind. Found more than a few sites talking about this issue. Here's one:
http://reviews.cnet.com/8301-13727_7-10402811-263.html
A possible fix here.

Possible Fix for Printing Problems in Leopard

I got this information from Mac OS X Leopard Edition book by David Pogue. Here's his possible fix for printing problems in Leopard...Open web browser and enter this address http://127.0.0.1:631. You'll find youself at a secret "front end" for CUPS (Common UNIX Printer System), the underlying printing technology for Mac OS X 10.5. This trick lets your Mac communicate with a huge array of older printers that dopn't yet have Mac OS X drivers. Using this administration screen, you can print a test page, stop your printer in its tracks, manage your networked printers and print jobs, and more–a very slick trick. Haven't tried it yet...anyone who does let me know how it worked!

If you literally "checked" them, meaning the checkboxes, that only affects their visibility. To remove them, select one and then click on the "minus" part of the "plus minus" at lower left.
Doug

Possible fix for errors 11503 and 50

Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it is, delete the desktop folder with all the temp files.
If it's not, then I can't help further, but that's what worked for me.

Several possible causes from the info you gave
Battery level low - recharge it for at least 4 hours till the full charge sign displays (2 prong icon instead of lightning icon).
Time to Reset the iPod - Press the Menu and center Button for about 10 secs till the Apple logo comes ON, then let go of the buttons.
your hardisk is starting to give problems, hence the skipping and some song refuse to play. - Do a disk diagnostic - follow this post by tt2.
https://discussions.apple.com/message/17028567#17028567
If you have updated any sofware application in Windows, then follow this Apple support procedure
http://support.apple.com/kb/TS1539
Most likely you have to do all, as the iPod hardisk filesystem would have been corrupted, or else the iPod Reset would bring it to normal operation.
Good Luck!

Fix For The Plugin Tab Popping Up.

This is a possible fix for some users. It worked for me when the about:config option did not stop the popup.
Check your plug-ins for one called Metastream. If it's there you can just disable it and the problem will go away.
If you want to remove it, you have a couple of options.
First look for a program called Viewpoint Player. You may have had this years ago (mine was 2004), and uninstalled it already. The files are still active.
Look for it in the add / remove programs area first. If it's there, uninstall it. This program was not listed on my system.
If it's not there, the goto (in XP), Program Files\Viewpoint and delete everything in that folder, then delete the folder.
If the plugin still is present, goto Program Files\Firefox\plugins and delete the 2 files with viewpoint in their names.
This should clean up the flag that makes your Firefox start the plugin tab.
Hope this helps a few people out there.
If this help you, please reply to keep it at the top of the page so others will see it.
- TechOwl -

bump to top

Possible fix for OS X 10.5.7, losing connection after sleep, restart

Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
=============================================
- After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
- Losing Internet connection after sleep, restart, cold reboot.
Possible Fix:
1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
b)Test to make sure you can connect to a web page.
c)Go to sleep & wake up.
d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
a)Check to make sure you can connect to a web page.
4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
5.Restart computer. Test a web page.
6.Shut down & Start computer. Test a web page.
7.When everything is working fine, you can delete the extra location that you created in step #1.
8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.

If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5

Call to Arms for the dreaded U052 Wrong Printhead Error

This is a "call to arms" for all of you Canon customers who have had this problem and have had their printers disabled because of it. Please respond with the model of your printer and if you were able to fix it, what you did to fix it.  We need to put pressure on Canon to respond this product defect. It appears to be bad firmware that does not allow the user to override the problem and to continue to use the printer even in a degraded mode. From my investigations the problem is NOT a printhead issue - no way one can be printing fine and then have this error alert without having changed the printhead or ink cartridges! Canon, PLEASE take this issue seriously and provide a solution across the affected models. If nothing else there should be a trade-in allowance for those printers that have been affected by this product defect. I have had many Canon printers because they have superior functional specifications. I want to be able to continue using Canon products but only if I can have confidence that this product defect will not destroy my investment. If Canon is unresponsive our next step should be to aggressively publisize this product defect on social media and on major product vendor outlet sites as negatives reviews. Forum Users, please reply with your affected model number(s) and with details of any succdessful fix procedure.

This is what I've been able to find so far. 19 posts in 2 of the forums. These represent 36,989 views of the same U052 problem! 16 different models have reported problems:MG5320
MG5350
MP520
MP530
MP600
MP610
MP830
MP860
MP960
MP990
MP970
MX700
MX882
MX860
MX870
MX892 Where is the Canon Product Quality Assurance Department? This product deficiency should be investigated and a robust solution provided to the thousands of affected Canon loyal customers. What is your response Canon? Doesn't this warrant a firmware update to correct this product deficiency? Is it time for a class action law suit?
1- U052 Printhead Problem MX870
by chdevers in Printer/Multifunction Support
Stopped printing while in the middle of a big job with full ink tanks, then when turned back on, gave the dreaded U052 print head error message. I have tried everything given by Canon to re-start...
Show results in replies (5)
‎05-30-2013 06:19 AM
11 Replies
3893 Views
2- my canon mx892 will not print because of error U05...
by markmarn in Printer/Multifunction Support
our canon mx892 will not print due to error U052. i followed all of the suggested steps for this problem related to an MX700 but it did not correct the problem. now what?
Show results in replies (4)
‎08-10-2013 05:48 PM
4 Replies
1672 Views
3- MG5320 U052 Error
by JimCarey in Printer/Multifunction Support
I have had the MG5320 printer for just over a year now. Everything has been working brilliantly until recently. I am now getting an error: "U052: The type of printer head is incorrect. Install...
Show results in replies (2)
‎11-01-2013 04:13 PM
2 Replies
488 Views
4- My canon MP600 will not print due to error message...
by Shelby27 in Printer/Multifunction Support
Error message - The type of print head is incorrect - install the correct print head. I have not changed the print head - all lights are solid red with the exception of M and C. When you remove them ...
Show results in replies (1)
‎12-30-2013 06:17 PM
1 Reply
190 Views
5- Error code u052 on pixma mg5350, says print head n...
by Dendou in Printer/Multifunction Support
‎09-29-2013 08:15 AM
571 Views
6- mp830
by mags in Printer/Multifunction Support
I keep receiving an error on the screen of my mp830 that says: Install the correct print head. This started since I put in new ink in all but one ink well...which is the number 5 one, the biggest on...
   •   Tags:
   •   U052
Show results in replies (1)
‎05-24-2013 05:52 PM
3 Replies
1070 Views
7- MP610 no longer printing color
by steger in Printer/Multifunction Support
My MP610 has been working reliably and well for years. Then... I received a U052 error ("type of print head incorrect"). By removing the print head and cleaning it with hot water, the...
Show results in replies (1)
‎01-28-2014 12:22 PM
1 Reply
137 Views
8- MP830 printhead error message
by Maryruthmarks in Printer/Multifunction Support
After I put in a large black cartridge in my MP830 printer, it comes up with a message saying "The type of printhead is incorrect. Install the correct print head" I did nothing differen...
   •   Tags:
   •   U052
Show results in replies (1)
‎02-01-2014 08:10 PM
1 Reply
41 Views
9- MP520 Print Head Problem
by vf32 in Printer/Multifunction Support
I tried to print but got the message, "The type of print head is incorrect. Install the correct print head"
Show results in replies (2)
10- Error message on my MX700 Printer: U052 This type ...
by jdegann in Personal Printers
I got this after installing new ink - it worked just a bit and then when I turned printer off and on, got this msg. I took out cartridges and head, put them back in, and no change.
   •   Tags:
   •   choc1970
   •   U052
Show results in replies (5)
‎11-28-2012 09:16 AM
19 Replies
20152 Views
11- Getting U052 (type of printhead incorrect) on my P...
by Islander in Personal Printers
I'm getting a U052 error message on my Pixma MP610 printer. It reads "The type of printhead is incorrect. Install the correct printhead." I replaced an ink cartridge that was running low...
Show results in replies (1)
‎09-01-2013 12:20 PM
1 Kudos
1 Reply
3703 Views
12- U052 error message on my Pixma MP610 printer
by corhoe in Personal Printers
It reads "The type of printhead is incorrect. Install the correct printhead. Whats the solution? corhoe
Show results in replies (2)
‎01-25-2014 05:12 AM
2 Replies
167 Views
13- Call to Arms for the dreaded U052 Wrong Printhead ...
by macnicol in Personal Printers
This is a "call to arms" for all of you Canon customers who have had this problem and have had their printers disabled because of it. Please respond with the model of your printer and if y...
   •   Tags:
   •   U052
Show results in replies (1)
‎01-30-2014 10:13 AM
1 Reply
83 Views
14- Canon MX700 error message U052, then 5200
by SKS1971 in Personal Printers
Recently, after installing a new black print cartridge, I received the error message U052. I followed the trouble shooting suggestions. After turning printer back on, now I get error message 5200...
Show results in replies (1)
‎02-28-2013 11:52 AM
1 Reply
925 Views
15- Canon MP990 U052 - print head is incorrect
by jaj in Personal Printers
I have taken the print head out and placed back into the printer - then replaced all ink cartridges - turned printer off - unplugged printer for 10 minutes then turned back on. This error message ke...
Show results in replies (1)
‎08-15-2013 04:38 PM
1 Reply
463 Views
16- error message u052 canon mx882- printer worked fin...
by ddodds in Personal Printers
Canoon mx882 error message u052 printer and scanner have worked great. Thought i should do some maintence since in 3 years i had never done it. cleaned roller tested ink heads everything ok thgen...
   •   Tags:
   •   U052
Show results in replies (2)
‎04-09-2013 09:18 AM
2 Replies
1436 Views
17- how to fix a message from cannon mp530 "check cart...
by gsecondez in Personal Printers
hi, i have a cannon mp530 printer. it stopped printing and a message showed "check cartridge U052". all of the ink cartridge still have ink and none of them are blinking. can you please...
Show results in replies (1)
‎08-23-2013 11:34 PM
1 Reply
800 Views
18- Any new help on fixing U052 error on MX860?Reinsta...
by eddytsang in Personal Printers
I have been using this printer for a while. No change and it just come out with this error. Is it time to get a new printer? Try the restall print head method. no luck. Any other suggestions? Th...
‎01-18-2014 10:27 AM
99 Views
19- My MP970 printer won't print.
by sasa in Personal Printers
My MP970 printer won't print. The message says the type of print head is incorrect. Install the correct print head. This is the second time in two months this problem arose. Last time it just st...
Show results in replies (1)
‎07-31-2013 11:02 AM
2 Replies
1097 Views

When will we get a fix for the Snow Leopard Compatibility issue??

When will we get a fix for the Snow Leopard Compatibility issue?
I am growing impatient not being able to use cross dissolve or titles.
Its going to be a pain having to back out to OS 10.5. This is beginning to be like Windows Vista.

You don't say what "..Snow Leopard Compatibility issue.." you're having.
My titles and Dissolves - and everything else - work perfectly with iMovie HD 6 and with iMovie '09 in Snow Leopard.
Perhaps you need to revert to QuickTime 7 ..just in case you over-wrote QT 7 with Snow Leopard's own QuickTime X when you upgraded to SL.
QT7 and QT X both sit happily alongside each other in Snow Leopard ..you might want to give that a try.
But I have no problem with any aspect of iMHD6 nor iM09 (..and no trouble with "stills"..) using Snow Leopard on a "late '08" MacBook Pro.
I haven't yet installed SL (Family Pack) on my Mac Mini ..I'll let SL throw away my QT7 on that, and will see if that causes any problems with iMovie. If it does, I'll then download and re-install QT7 and see if that fixes any problems. But don't hold your breath ..I may report back tomorrow, but today I'm pretty busy! I'll do my best, though..

A possible fix for the dreaded vista/xtremeMusic/nforce 4 probl

Similar Messages

Maybe you are looking for