A Possible Solution to the Issues with QuickTime  + Beloved Question Mark.

This is a possible solution to this issue. I have been doing some thinking about this. I have suggested the answer would come from Apple Computer, through an update of "QuickTime". I looked at the applications using the internet. I highlighted them, did a "Find Info" or Apple/Command-I. I decided to check the "Rossetta" box and in my case, better functionality. One thing, make sure you check all of them. I am not jumping up and down and screaming I have the answer. I am just saying it's a possibility. If you want to go this route, let's talk if we run into problems. This is the purpose of the discussion boards.
Nort

Open QuickTime with Rosetta and the samegoes with Safari.

Similar Messages

  • I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    You need to use the computer's install disks to repair the hard drive or install a new OS.
    (58033)

  • My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    http://support.apple.com/kb/PH5836
    Reset PRAM.
       http://support.apple.com/kb/PH14222

  • Possible solution to disconnecting issues with Realtek RTL8188CE

    As you may recall I've been having issues with my RTL8188CE WLAN card (and if I recall I'm not the only one), anyway I have found something that solves it for, at least, my system
    I introduce to you: Linux Mint Debian Edition, the distro itself is irrelevant but how it sets up networking is very relevant, from what I can tell it uses a so called obsolete method of setting up the network firmware this would be ndiswrapper, from what I can tell it works excellent.
    Another thing I noticed is that this card is utter garbage in any OS, it doesn't work right in windows either (making multiplayer games... less than entertaining)
    Now, here's the catch: I don't recall how LMDE set it up nor do I have a partition running it right now (sacrificed for a pure debian jessie system (I always keep coming back to debian)), if anyone has this card they could try installing lmde to figure out the network setup it is using (actually, that would be really helpful)
    Anyway, that's my two cents to the issue of getting this card working
    No seriously, that's all. Now off to get my Debian install and then arch install working with this setup to verify that it can be replicated on other systems. (if possible could anyone try this and post their results, I had four disconnects over the last month, three were my own fault for messing with the driver)
    P.S if this is in the wrong section (might be, it seemed like the most relevant one to me though) please don't overreact ^^
    EDIT: Update - the card seems to work somewhat reliably with the native linux driver on kernel 3.10 with ipv6 disabled, still not perfect but *usable* (as in haven't disconnected for over an hour)
    Now, time to do some more experimenting (the actual stability seems very random depending on kernel version, driver version, position of the moon and whether or not you've successfully located elmo)
    Last edited by CubeGod (2013-11-08 14:24:19)

    UPDATE: Okay, so as I mentioned that running kernel 3.10 with ipv6 (and powersaving) disabled it works, it isn't perfect, it loses connection every now and then, doesn't get any usable speeds and it randomly disconnects and requires a reauth, nothing major as it isn't exactly common (ugh, it's a major improvement over disconnects every two seconds)
    This card is still awful though (on an unrelated note I still find it hilarious that the card works even worse in windows *rolls eyes* I blame microsoft)

  • The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

    The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

    Read: http://support.apple.com/kb/TS4436
    It is pretty short so here is the entire text:
    Symptoms
    A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
    Resolution
    Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
    Which is exactly what eelw wrote.
    No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
    ... identifying themselves as Apple employees.

  • I have some ideas on how to fix the issues with CC subscriptions

    This post is directed mainly at Adobe, but I would like the community to weigh in of course.
    (BTW, if someone has suggested this already, I apologize in advance.  I didn't get a chance to read through the hundreds of posts/replies about this subject).
    It's pretty obvious that many people don't like Adobe's decision to go to a subscription only plan and there are understandable concerns over not being able to access digital content if/when the subscription ends.  The purpose of this post is to discuss possible solutions to the problem.  If you want to discuss the problem(s) or complain about them, this is not the right discussion thread. (unless it's in the context of offering a solution)
    To get directly to the point, perhaps a hybrid model would be the best solution.  What I mean is this...why not take aspects of both the subscription model and the perpetual license model and combine them?  To help you further understand what I mean, I'll provide an example.
    Give customers an alternative
    Customer A purchases a CC subscription.  After a year, customer A decides to cancel the subscription.  Adobe obviously wouldn't think that the amount of revenue accrued from customer A after 12 months matches the value of the software provided (~ $600 USD).  Naturally, they don't want to give away a perpetual license for all that software at that price point.  On the other hand the customer still wants to be able to not only use the software, but more importantly, access the digital assets they have created during that the usage period.  The hybrid model would allow the customer to transition to a perpetual license with some provisions:
    Customer A can purchase a perpetual license at a prorated rate, based on how long they have had the subscription.  The rate should be calculated based on the amount of the time the customer had a subscription and the amount of time between major software releases (i.e. if there is a 2 year period between major releases and the customer subscribes for 1 year, take the value of the software if it were a perpetual license and subtract the amount paid by the customer during the subscription...or something along those lines).
    If customer A purchases a perpetual license (at the prorated rate), that person (or entity) would not be eligible for major upgrades unless they elect to enter the subscription program again.
    If customer A elects not to purchase a perpetual license right away, they have until just before the next major release to purchase it if they want to purchase it at the same rate.  If they wait until after the next major release, they may have the option to still purchase a perpetual license, but at a higher rate, but they can only purchase the version they had while subscribed.  If they want the newer release they must reenter the subscription process.
    Customers can't get newer versions of the software without first going the subscription route.  Perpetual licenses are given as an option for those who do not wish to continue a subscription, but still need to utilize a version of the software.
    I do realize that there are a number of scenarios to consider and need to be thought through.  For example:
    Customer B buys a subscription, stays on it for 3 months, and then decides to cancel.  Customer B elects not to purchase a perpetual license but decides to reenter the subscription program a couple of months after canceling and keeps the subscription for a month (and so on).
    How many times should a customer be allowed to exit/reenter the subscription program between major upgrades and still be available to purchase a perpetual license or should it even matter?
    What's the best way to calculate the cost of a perpetual license in this scenario?
    Should customer B be required to pay a reasonable "subscription reentry fee"?  The thinking is, if customer C keeps a subscription for a full 24 months (between major upgrades for example) and customer B keeps canceling and reentering during the same 24 month period, should customer C who has paid more during that period than customer B be treated the same?  Just a question.
    Obviously, the above examples are only suggestions and more thought needs to be put into them, but the central concept is this...both sides can win!  There is no reason why this situation can't be turned into a positive one where it's economically and practically feasible for both the customers and for Adobe.
    Anyway, I'm not the expert and I haven't considered all the angles and possible scenarios (obviously).  I just wanted to begin a discussion that might hopefully produce solutions to the problem(s).
    Your thoughtful feedback is appreciated (and needed ).

    Hi,
    Does your CSS have any styling for ul and li? Is this project that you upgraded to RH8 from a prior version of RoboHelp? If so, you may be experiencing the list problem: http://www.grainge.org/pages/authoring/lists/lists.htm
    Greet,
    Willam

  • FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

    Hi,
    I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
    For example, what I'm trying to do is below:
    In grid2.column[A], I have the following formula:
    grid1.column[A]
    The result is an error.
    The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
    grid1.column[A] - grid2.column[A] 
    Any help is much appreciated!
    Thanks,
    Tiffany

    Thanks for the detailed response Mike.
    The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection  (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
    Thanks again for your responses. It's very much appreciated.
    Tiffany

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • "Test Error" - "raise the issue with your service ...

    Help!
    I have had performance problems on my broadband for quite a while but not been able to progress. The usual number based test from BT says we should get between 4 and 7 mbps. In reality we struggle to get 2 mbps, frequently lanquishing at 1.5 mbps.
    I have been onto http://speedtester.bt.com/ to get analysis on the line (previously having had problems with our profile) but whenever I try to run a test (over several weeks) I now always get the reply:
    The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider.
    Following up on this with the Indian call centre was an exercise in futility, they just couldn't understand what I was talking about and just wanted to follow the usual script for speed problems. The last time I tried they said they'd found an error at the exchange which they would fix shortly. The result of the "fix" was that our phone and broadband disappeared for 4 days and resolving this came with the usual threat of charging us £99 is the problem wasn't BTs fault. The fault was fixed without any explanation but subsequently I've been reluctant to follow up the problem through this route.
    I don't know how to go about getting someone to fix the problem without being able to run the speed tests that BT will accept.
    I would greatly appreciate some assistance from this usually very helpful group.
    Thanks,
    Andrew
    Solved!
    Go to Solution.

    John,
    Thank you for answering.
    The details from my ASDL statistics are below. I cannot provide a BT Speedtester result - this is one of the problems I was raising. I have done a quiet line test and there is no noise. I don't have an internal master socket; I have an external grey box from which a number of wires run to various sockets.
    Thanks,
    Andrew
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    1 days, 16:42:25
    Downstream:
    4.063 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.6 dB / 20.0 dB
    Line attenuation (Down/Up):
    44.0 dB / 25.0 dB
    Output power (Down/Up):
    20.1 dBm / 12.4 dBm
    FEC Events (Down/Up):
    4667988 / 202
    CRC Events (Down/Up):
    4713 / 192
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    86618 / 162
    Error Seconds (Local/Remote):
    33661 / 5662

  • HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

    can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

    Try a new SIM from your carrier.  If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

  • It's now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5 audio app missing lyrics

    It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5.
    I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyrics no longer shown,
    I am extremely disappointed and angrywith those responsible for the iOS 5 update, in regard to the way it hasaffected the music app in my iPad.
    I also own an iPhone 4, am an avid Apple fan, and up until now have beenextremely pleased with the devices, and have sung their praises to friends andassociates.
    I am a professional musician, and purchased an iPad primarily to use with theperformance of my music.
    The changes made to the music app affected my performances over the weekendextremely adversely – limiting my repertoire and causing confusion and delays.
    I have spent many hours talking withApple helpline assistants (who, incidentally have been very good and have triedto help), and I have also spent a lot of time on this letter.
    I greatly regret updating to iOS 5.
    There are two major problems with the music app.
    1. Lyrics no longer displayed
    2. Layout, and appearance and consequently performance have seriouslyregressed.
    I have a repertoire of around 500 song backing tracks, organised into about 20playlists, half of which featured lyrics / chords that I have spent monthsrecently entering into iTunes so that they could be used on my iPad.
    These were working fine up until the update - now they are gone.
    Previously, the app featured large icons for playlist, artists, songs etc. atbottom of page: Now there are small, grey, indistinct barely legible buttons.
    Previously, when playlist icon was selected - all the playlists were listedclearly in order on the left hand side in black on white (as in iTunes).
    Now they are scattered across the whole page in large squares (displayingnothing if there is no album art).
    The identifying wording below eachsquare is now small, grey, indistinct & barely legible.
    Previously, when a playlist was selected - the songs were displayed in adescending list in black & white: now they appear as small, grey indistinct & barely legible.
    Previously, when a song was selected - it appeared filling the page, and withaudio controls clearly positioned at top of screen. One tap would bring uplyrics.
    Now audio controls appear at top once again small, grey, indistinct &barely legible.
    A small square representsalbum art which if tapped fills page. A further tap fails to bring up lyrics.
    Don Wilson

    Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

  • HT1386 I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New song that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    Hey Etti101,
    I'd start off your troubleshooting process by deleting and redownloading the songs:
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    Delete the purchased song that is exhibiting the problem from your iTunes library.
    Click on the Purchased link in the iTunes Store to view your previously purchased music.
    Download your previously purchased song from this list.
    via: Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Regards,
    Delgadoh

  • Didnt read the issues with ios5 until i've done my update. I ve restored my iphone 4, 3 times, and till now it is locked in a loop of the apple logo, loading

    Didnt read the issues with iOS5 until i've updated my iPhone 4. Restored 3 times and it is still locked in a loop of - Apple logo, loading, and a flash of "...restore successful...few steps away..." and buzz. Please help

    At the end of a Restore, you will be asked if you want the current iPhone to be synched as a New iPhone or use the current iPhone's settings. Selecting the former since to have solved the messaging problem. If u have done back-up of the "old" iPhone on iTunes, then your New iPhone will be the "old" iPhone too after synching with iTunes :)

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

  • When a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

    when a warranty replacement in hand, is it possible to change the 4s with 5 by extra fees?

    Sadly, life is sometimes unfair. Although, I'm not certain why you feel you would be entitled to any form of upgrade. It is neither stated nor implied in any Apple literature.

Maybe you are looking for

  • Moving from SBS 2003 to Hyper V 2012 R2 VM's

    Hi Folks, Apologies if I have posted on the wrong Forum I will keep this brief . My customer currently has an old SBS 2003 standard physical server. They utilize the integrated Exchange 2003 system. It now needs to be changed/upgraded due to lack of

  • Merging pdf documents in Preview while maintaining OCR capability

    ...isn't working.  I can copy text from the individual pdf's, but when I merge them, the OCR text is replaced with "_".  This happening to anyone else?  This is happening on more than one Mac here at the office. I'm opening one file, expanding the si

  • How to maintain the PR currency when it is converted in a PO?

    Hello Folks, My client needs to maintain the Purchase Requisition currency when it is converted in a PO. He wants systems issues an error message when for instance a PR is created in Euros and when this PR is picked and converted into a PO system doe

  • No system preference window

    When I open system preferences I do not get a window showing the contents.

  • G/L a/c Balance

    Is there any Fm to get G/L A/c balance for the credentials below Company code : G/L A/c No : date  :