A problem about change request release se10,urgent!

hello,everyone,
when I use tcode se10 to release my change requestno,
an error occured:
'test call of transport control program (tp) ended with return code 0232',what it mean?who knows?
pls give me help,.thanks very much.

Hi Niuniu,
Try this to vaoid the problem.
On Transport Domain Controller:
- goto /nSTMS
- Overview -> Systems
- Click client then select u2018SAP Systemu2019 -> Update Configuration (Ctrl+F2)
- Extras -> Generate RFC Destinations
- Repeat this for Controller instance itself ! ! !
On Domain Clients:
- goto /nSTMS
- Overview -> Systems
- Client its instance (eg DEV) then u2018SAP Systemu2019 -> Update Configuration (Ctrl+F2)
- Extras -> Generate RFC Destinations
Dont forget to reward points if found useful.
Thanks,
Satyesh

Similar Messages

STMS change request release problem

Hi
I am not able to release change requests, sab task able to release, but problem in main request, when I press , release directly, on the bottom it shows u2026tp successfully connected / check writeability of buffers finished with return cod 0. Then screen hangs u2026 manually I have to stop the transition.
I have configured STMS 4,5 times but same problem, in SM59 all retaliated RFCs working fine.
Our System is ERP 6.0, HPUX with DB2
Kindly give me a solution.
But in Tcode STMS >>Monitor>>TMS Alerts>>TMS Alert viewer showers following error:
Date       Time       User           Function      Message                                            System   Clt
23.05.10   17:29:07   TMSADM         TMS_TS_GET_TRLIST    NO_LOG                SID      000
23.05.10   16:58:25   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                               READ_PROFILE_FAILED                                            SID      000
23.05.10   16:57:30   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                                 READ_PROFILE_FAILED                                            SID      000
23.05.10   15:55:59   TMSADM         TMS_TP_MAINTAIN_BUFFER                                        RFC_SYSTEM_FAILURE                                             SID      200
23.05.10   15:05:36   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   15:01:29   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   14:53:00   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID    000
23.05.10   14:51:38   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID      000
Regards
Sunny

Hi Sunny,
Its hard to tell what might be the problem.
I would recommend that you:
- update kernel to the latest patch level for your release
- update your transport tools, tp and R3trans to the latest available for your release
- go into STMS - system pverview and do the 3 checks: Connection test, transport directory, transport tool
check if they all pass.
- try to release a transport and then if it still freezes after all of the above, stop it and check the system log, trans.log, the latest logs in usr/sap/trans/tmp and usr/sap/trans/log to see what was the action it was doing before it froze. That will give a clue as to where the issue may be.
regards,
Paul

Change request released & but not visible

Hi kaushal & all,
Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
see the request in queue.Also log is not visible for the released request.

Hi,
Customizing change request is released from development system & data file & co-files are not generated
For the above reason only two possibilities if STMS configuration is proper.
- Request is local request
- No target system is define in released request.
in your development system run se01 -> in display tab enter request -> press enter.
double click on request -> select properties tab -> make sure target system indicate your QAS system.
regards,
kaushal

Authorized Status problem in change Request

Hi All,
when a correction is completed/withdrawn, generally the change request status changes to Implemented/new and we used to confirm the realization.
The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
now after the necassary configuration being done, For the open corrections it is changing to implemented. but for already completed corrections the status is still Authorized only.
It is always getting displayed in the report as not completed ones.
Kindly guide on how can we close this change requestswith status authorized and whose corrections are completed already.
Regards,
Subhashini.

Hi Subhashini.
I am running in to the same problem....
The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
Could you please tell me what changes you did to resolve the issue ?
Please see the active thread:
[Re: Controlling ACTION in ChaRM|Re: Controlling ACTION in ChaRM]
Regards.
Rajesh Narkhede

Number range problem for change request in CHARM

Hi guys,
Currently i am working on CHARM implementation and i have a doubt when i create a customised change request(ZDCR) a number is getting generated (e.g 8000000791) before saving the document.but when i come out of the CR without saving and try to create a new CR it is taking the next number. i.e 8000000792
Now i dont want the number to be skipped to the next number if it is not saved, kindly give your valuable inputs.
Regards
Raju

Dear Fr,
In SPRO
Select the transaction type which you have created now
go to change mode
search for the box WITH TITLE TRANSACTION NUMBERING
now deselect early no assignment.
whenver you press the save button only then
you wil have a new no generated.
PLEASE REWARD POINTS

[RFC to File]Problem about Changing file name in message mapping.

Hi,
my problem:
    Type:RFC to File
    I change the file name in message mapping.
when I call the RFC to send the data twice at the same time, both of the output file names are changed while I only want to change the second output file name.
    thanks
Sam

In my MM, the input values to these variables (var1, var2 and var3) are (<ZZCOMBI>array,G499999,END_FIFC0029) ,
var1 is an array of input <ZZCOMBI> item list;
var2 is get from a property file by call another UDF;
var3 is constant value.
the test input data :
I send the data for the first time:
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G000002G000002</ZZCOMBI>
<ZZKYKBN>*</ZZKYKBN>
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G000002G000002,G499999,END_FIFC0029)
the output file name(File1) :END_FIFC002920090413-171534-053.dat
output record: G000002G000002
because the data what I send is the last record, the system send the dummy data for the second time by program.
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G499999</ZZCOMBI>
<ZZKYKBN />
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G499999,G499999,END_FIFC0029)
the output file name(File2) :END_FIFC002920090413-171533-928.dat
output record: G499999
I find that File2(20090413-171533-928) was ouput before File1(20090413-171534-053 ) from the time stamp.
I am not sure about that "XI will create a message ID for each message and the messages are independent." as you mentioned above.
Best regards
Sam
Edited by: YONGHE ZHOU on Apr 15, 2009 3:59 AM

The problem about changing the SID

Hello,
Due to some reasones ,we shoud chang the R3 sid from PR3(instance number is 00) to QR3 on one IBM iseries host .As we read some relatives doc about system copy ,we decide use method of exoprt/import to do this.But there are paramter that really confuse me now.In the step of SAP system instance indentification,I hesitate the instance number should be set.Should I choose a new number or keep the value that PR3 used(instance number is 00).BTW,is there two instance or just one instance in the host after I change the system sid
Thanks in advance.
Message was edited by:
Rong

I understnad this problem now.But still one got me.
I want to use SMIGR_CREATE_DDL to generating ddl statements for migration,but when I finished this ABAP I cann't find any script has been generated.
The installation Directory is '/tmp'.
Our platform of R/3 is OS/400.
Thanks.
Message was edited by:
Rong

Problem about Changing Password?

1 After logining in mobile server,I tried to change the password,but it sometimes failed.
2 After changing the password in webtogo client,I found the password in mobile server had been also changed.
What relationship about the password between online and offline?
Will you please give me some advice?
Thanks a lot!

No, we didn't change the network name or the SSID.
I am trying to get my head around how the preference files work. I understand that changing the password would change the preference file, but after further changing, I noticed that if I changed the password back to the original password, it would no longer connect. Then, I changed it back to the password from which I had changed the original password, and it did not connect. Then, after changing it to a brand new password, it connected.

Returncode of Transporting a change request

Dear developers,
do you know how to check the returncode when transporting a change request to test or productive system.
In my case I have the special problem that change requests will be transported in an async way so that the developer could not check in the SAP solution manager whether the transport is error free or canceled with an error.
Is there a way to switch the transport management in the solution manager to a synchronous mode?
Best regards,
Jens

Hi Ganesh,
Can I ask something about inactive object here?
I applied notes with SNOTE. But all objects are inactive.
When I activete them, The system requires accesskey.
How could this happen? And any solution for this?
I can't deapply the notes any more. coz it's bug fix for SNOTE.
If I do this, the system will be inconsistent, this happened beffore
Thanks
kaz,

Change request message standards

Hi Experts,
what is the change request message standards? Is there any message standards. Pls send me the full details.
Thanks in Advance,
Saradhi

Hi,
If you are taking about change request description and the documentation that is done in SAP for transports then it's totally internal to a client and how they keep it.
You can maintain anything which is being followed or which is followed by your client.
If it's not related to this, then I am unsure about the exact issue
regards
Nishant

Local change request

hi
i released local change request in my development server .but it is not showing request number in queue any another place. i want that local change request released request in quality server queue
is there a way to modification in released request .
any possible to the released request get back to original place.
pls give me solution

Local change request will not create any request files (data/cofiles), you can create another request manually and add the object of the local request. SE09 --> create request --> select type of request (customization or workbench) --> type des and create new request.
expand the newly created request and select include objects --> and the appropriate request.
alternative is do minor changes in the program and it will popup you for new changes reuqest.
cheers,
-Sunil

Change the description of the change request number" in SE10 after release

Hi All
Is there way to change the
"description of the change request number" in SE10
after releasing the change request number?
appreciate your feedback
Thanks you
Iver

Hello
I do not know a way to do it in se10 but a simple program could do the trick.
Include the following code in your program.
update e07t set as4text = 'your new description'
where trkorr = your_cr and langu = 'E'.
Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
Regards
Greg Kern.

Solution Manager 3.2 SP 8- Change Request Management Configuration Problem

Hi friends,
We are in process of implementing SOLMAN 3.2 SP8 in our landscape.I am facing problem in configuring change request management.
When the developer is working on an urgent correction document we are facing a problem.The steps we are following are here under provided.
Step 1 :
Selected Action "In development" - > it created the transport request in the dev system.
Step 2:
Action "Log into System" -> made correction attached to the transport request manually and released the task.
Step 3:
Action "Release transport requests" -> The transport request in the development was released.
Step 4:
Went for action "Pass to correction" -> I am facing exceptions which conveys
Status was reset by system
A condition is not satisfied because of an exceptional situation
Not all transport requests yet released
And we would be thankful if you provide the authorization required for the different roles in the change request management.I have followed the help file of SOLMAN 3.2 and create the users as under
User - Role
SOCM_RQSTR - ZSAP_SOCM_REQUESTER
(Derrived from SAP_SOCM_REQUESTER)
SOCM_DVLPR - ZSAP_SOCM_DEVELOPER
(Derrived from SAP_SOCM_DEVELOPER)
SOCM_CHNGNGR - ZSAP_SOCM_CHANGE_MANAGER
(Derrived from SAP_SOCM_CHANGE_MANAGER)
SOCM_CHNGNGR - ZSAP_SOCM_IT_OPERATOR
(Derrived from SAP_SOCM_IT_OPERATOR)
Even then I am facing problems while developer creating transport requests and while logging into development system.
I tried adding S_RFC,S_RFCACL auth objects to their roles but did not help.
Pl. suggest.
Thanks & Regards
Mrutyunjay
Message was edited by: Mrutyunjay Rao Dora

Hi all,
We are trying to implement the Change Request Management piece in Solution Manager 3.2.
We are facing the following issues which I think relate to the same reason:
1)We have created a Maintenance Project in SOLAR_PROJECT_ADMIN and assigned it a logical component, which consists of our two system landscape (namely DEVàQAS). We have also created the IMG project in the DEV system and have distributed that IMG project to both the Solution manager system and the DEV system. Now we have to make the maintenance cycle and task list for that maintenance project, but as we select the project and click on create project cycle it shows the message "The project is not released. Hence cycle can not be created". It is showing the status of project as locked .How can we open or unlock the project to remove the error?
2) Also after selecting the SMI project when we click on the button CTS status switches or project specific Transport route it responds with the error "Project landscape not configured; set the project status to "open" first ".
3)When we click on synchronize single project it prompts for the login of connected system (Development System) and after login, it gives an error "Warning, problems during synchronization of the system Landscape".
For Error resolution, we have checked the system landscape and it does not give us any errors. We have done that, both from the solution manager by going to the transaction SOLAR_PROJECT_ADMIN --> >system landscape tab>selecting our logical component and doing a check by clicking the "Check system Landscape" button. It returns with "no Errors". We also did a check on the TMS configuration by logging directly on to the TMS domain controller system and checking the Transport routes. We have checked the RFC connections without any errors.
Any help would be greatly appreciated.
Thanks
Abhi

Email to Manager of user on Urgent Change Request

I think I asked this before so I apologize but I am trying to figure out a way for a Manager of a user that creates an Urgent Change Control to get an email with the Change Control details.
I created a subscription and it triggers off the Title looking for the word Urgent. That works OK. The subscription uses Change Request as the Target.
The problem comes with the Recipient as is usually the case. I have to use Related Recipients because it could be anyone that submits the Change Request.
I have tried the following:
About Configuration Item[User] --> Manages User [User]
Is Related to Work Item[Work Item] -->About Configuration Item [User] --> Manages User [User]
Neither of which work. I know the subscription itself is working because the Assigned user gets the email, but the Manager does not.
Is this even possible without using Orchestrator? Seems reasonable that it should be.

Hi,
You need some custom workflow that will send emails. I posted in the
blog with a source code of the solution that sends email programmatically using SCSM SDK. You could modify the code for your requirements. The default subscription cannot work with related to related items.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

Release local change request

Dear all,
I would like to back up some of my change requests. But when release them, they are not available in transport directory of this system. Do you know how to resolve this problem ?
Thank you very much,
Sylvecat

Hi,
Go to SE10.
Select the released Check Button
You will get it.
Regards
Sandipan

A problem about change request release se10,urgent!

Similar Messages

Maybe you are looking for