A Problem Uploading because the window is too low

I have an iMac running Yosemite.  I am talking about Safari but it happens on other browsers too. I don't know where the problem lies.  When I try to post a message or upload there is a window and that window that is the destination. Sometimes the upload window is moved so far down the screen that the upload icon is missing.  If I could separate it from the parent window I could move it where ever I want.  Is there an easy to fix this? Who could fix the problem.

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Drag the image file into the editing window to upload it. You can also include text in the reply.

Similar Messages

  • I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

    I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

    I tried to send it through gmail and the acct is  a POP acct
    I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

  • "Can not perform this operation because the layout is too complex"

    "Can not perform this operation because the layout is too complex"
    to create a 3D extrusion
    Hello
    Is it possible to work around and solve this problem?
    Without going through the box: cutting 4 part
    please
    xavier.

    Merci Violon popur tes conseilles, cool !
    After clipping of an object on a photo
    I want to make a 3D extrusion.
    With a picture of this size that does not work :
    1979/2765 300PP 31,3Mo
    I have this error message appears: “ Can not perform this operation because the layout is too complex ”
    For successful operation
    I must necessarily reduce the size of the photo to
    597/834 300PP 2,85Mo !!!
    How not to lose the pixel ?
    I need it additional plugins ?
    Version Adobe Photoshop : 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
    Système d'exploitation : Mac OS 10.9.1
    Architecture système : UC Intel Famille :6, modèle :44, niveau :2 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Nombre de processeurs physiques : 12
    Nombre de processeurs logiques : 24
    Vitesse du processeur : 2930 MHz
    Mémoire intégrée : 32768 Mo
    Mémoire libre : 27285 Mo
    Mémoire disponible pour Photoshop : 31299 Mo
    Mémoire utilisée par Photoshop : 90 %
    Taille de la mosaïque d'images : 1024K
    Niveaux de mémoire cache de l'image : 4
    2 X 2,93 GHz 6-Core Intel Xeon
    NVIDIA Quadro 4000 2048 Mo
    4 X 8 (32 Go) DDR3 @ 1066Mhz
    2 X OWC Mercury Extreme Pro 6G SSD Media (System acquisition / Projects)
      2 x 2 To de DD (5400tr/min)

  • Clipboard export failed because the image is too wide to save as a PICT

    Am I the only one who keeps getting this message in a new window,
    "Clipboard export failed because the image is too wide to save as a PICT"
    while working in Photoshop?
    I know little about a PICT file, except that it's some kind of file.
    Seems to pop up out of nowhere after I've been doing some copy/pasting.
    The really annoying part: it never shows up while I'm still working in PS,
    it's only after I click onto a folder or start working in another application.
    THEN the message won't let me do anything with the folder or application,
    but instead returns me to the PS screen for a few more seconds, then fades out.
    It's only after the fade-out that I can click on a folder or use
    another application.
    I have plenty of RAM (50%) and backup drive space assigned to PS, and
    again, this does not happen while still in a PS screen. Using Cache Level 6.

    While I haven't seen that particular message, I have had the "clipboard is too large to export" message. What you need to do is go to the Photoshop preferences and tell it to NOT export the clipboard. You should be able to find it the General section of preferences, just UNcheck the box in front of "Export Clipboard"--of course, if you copy something in Photoshop that you want to paste into another program, you'll have to re-check it. But bear in mind the limits of Clipboard.
    Francine
    Francine
    Schwieder

  • Could not complete the new 3D extrusion because the path is too complex

    I'm using Photoshop CS6 in Windows 7 64bit. I've seen other posts about a bug if you are trying to complete a 3D extrusion when a triangle is present, but my issue seems even more basic.
    I'm drawing a simple wave shape with the pen tool set to shape, no fill, 1px stroke. I'm simply drawing three points to create a simple sine wave - the idea being to create a wavy piece of 35mm film. The image size is quite big - 6000 x 4000 px. The first time I did it, the rendering worked fine but I didn't like the curve I had drawn, so I stepped back and tried again. Now, whatever I do, I get the "Could not complete because the path is too complex" message.
    Is this a known bug and are there any workarounds to create a single pixel wide wavy shape in 3D that looks like a piece of film.
    Steve

    I have run across this also, but my path was more complex.  As far as creating a single pixel wavy shap, I would use the depth map 3D feature of  converting a depth map to a plane.  Create a gradient in 32bit mode, so the transistion are smooth, and then go to the 3D menu and select new mesh from depth map>plane.  You can later go in and edit the depth map to tweak it.

  • Could not complete the new 3D extrusion from selected layer command because the path is too complex.

    I was trying to do a photo of mine like in this video but its not working help needed. thanks.
    http://www.youtube.com/watch?v=egyLY78H7nE
    When I tried the 3D I got an error message that said (could not complete the new 3D extrusion from selected layer command because the path is too complex.) what does this mean and how can i fix it?

    There was a bug at one time where really simple paths (like a triangle, for example) could cause that error.
    Is your path really simple (I don't plan to go watch the video)?  If so, have you installed the latest update for Photoshop?  That bug may have been fixed already.
    If it's not that, it's possible that if your path is really complex and simply exceeding Photoshop's capability.
    -Noel

  • "Could not complete your request because the path is too complex"

    I'm trying to render 24 characters of text with line breaks in 3D, because, as we know, 3D can be very spiffy... but I get:
    "Could not complete your request because the path is too complex"
    Interesting, I'm on a rocketship workstation with a fairly stealthy config. All is updated to the latest ver., 13.1.2.. Not the greatest card in the world (Quadro 2000), but it seems more than ample for this task..
    It works fine with 9 characters on one line... Ok, possibly (or rather likely) I have too much text (24 characters? Line breaks? Trebuchet?), but frankly, I'd be surpised... What are the limitations here? Tips?
    Thank you!

    In this case, I have photoshop doing all the number crunching through GPU:
    Also, my performace settings (this is 32-bit PS, so it only sees 4GB):
    We'll see what any Adobe folks say, thank you very much for your time and insights!

  • My iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks

    my iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    -Griff W

  • To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD.---I am using a Dell and can't import the CD I need because the window doesn't automatically pop up.  How do I fix this?  Any thoughts?

    "To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
    I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?

    You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
    If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
    tt2

  • Since upgrading to 10.7.4 my 21.5 inch imac the window is too large for the display. How can I make it fit?

    since upgrading to 10.7.4 my 21.5 inch imac the window is too large for the display. How can I make it fit?

    Some possibilities:
    If you have a Magic Mouse do Control+stroke downwards on the mouse.
    Check System Preferences>Displays is set to the correct resolution
    Check System references>Accesability and make sure Zoom isn't turned on.

  • My flash player didnot support such video and the version is too low

    I have checked in your internet, it told me Flash Player is pre-installed with Internet Explorer in Windows 8. and Either Flash Player is disabled or ActiveX Filter is ON. But i really find  Flash Player is enabled or ActiveX Filter is Off. For flash play, it can play most of flash video, however, it shows my flash player didnot support such video and the version is too low. In fact, the my downloaded version is the laterest. how can i fix the problem? thanks.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
    Try to "disable the hardware acceleration" in the Flash Player.
    *http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    See also:
    *https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
    Flash "Display settings" window:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • How to block an order if the price is too low?

    Hello,
    My problem is :
    How to block an order if the price is too low?
    I created a new type of condition ZMIN and an access by material.
    When the net price is below the minimum price the system must position the order on incomplete document for error of price.
    Thank you in advance.
    Frédéric Blaise
    e-Kenz S.A.

    Hello,
    you can enter a lower limit in the condition record:
    Lower limit of the condition rate/amount
    Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
    Use
    When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
    Or you can use the flag 'conditon update'.
    Condition update
    Controls whether limit values are relevant for pricing.
    E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
    This total value can be specified in the condition record.
    I hope that the information are helpful.
    With best regards
    Claudia Neudeck

  • Help!  Sometime, the voice is too low for the receiver

    Hi, I've found the voice issue of my iPhone: Sometimes, I use my iPhone talking with others, the receivers complains the voice is too low(Especially, serious when it's low battery). I've restarted my iPhone but it doesn't work. It's back to normal after it's fully charged. Do you why? and how to fix it? Thx.
    Frankie

    The volume via the built-in phone/earphone is no problem. The issue may be the built-in mic, it seems to be too leak for receive the voice, so the others(the receiver) can't hear clearly.
    Frankie

  • When I send project to iTunes the volume is too low. I have auto normalize checked.

    When I save project to itunes the volume is too low on the entire project.  I have auto normalize checked.  I have been sure to reduce the volumes below the red clipping dots.  This includes the master volume.  It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB.  Is sthere something else I should do to reproduce more volume when I share a project to itunes?  Thank you.

    DId you try a comparioson when exporting the same song with and without "Auto Normaize".
    Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • I have an old iPhone 3 gs. with ios 3.1.3. how can i update it to at least an ios 5 because it will not let me get games on the app store because the ios is so low.

    I have an old iPhone 3 gs. with ios 3.1.3. how can i update it to at least an ios 5 because it will not let me get games on the app store because the ios is so low.

    Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 6.1.6 for an iPhone 3GS.
    (108471)

Maybe you are looking for