A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory
When looking at the module for a LabVIEW VI being called from TestStand, I get the following message:
A problem was encountered with one of the files in TestStand\AdapterSupport\LabVIEW directory. Please reinstall it or repair it.
I made the mistake of cleaning up C: in my computer. Cleaning C:\National Instruments Downloads
Why would someone put bits of applications or modules, etc in such a directory?
I am not too crazy about restoring 11GB back into that folder. That's just insane!
Has anyone encountered this before? Any "easy" solutions? apart from re-installing TS...
Side note: I did not touch anything in the \Program Files|National Instruments\TestStand\AdapterSupport\LabVIEW
Solved!
Go to Solution.
Thanks PH,
I also had that. Fixed it.
I will not remove the ones in the NI downloads folder.
I will eventually need to remap everything to the appropriate drive.
I partition the drives into:
C:\ Windows and associated folders. Mostly OS stuff
E:\ Applications (this is where it will end up)
F:\ Files
G:\ Storage
H:\ Backups
I try to do what I normally implement in Linux. I hate sharing the OS with everything else.
Cheers,
RayR
Similar Messages
-
A problem was encountered while trying to send information over the Internet.
I have CS3 - Design Premium.
I had it installed on my old computer which crashed and was reformatted. I have a new computer now and am trying to install it again but I am getting an error that says:
Registration Unscuccessful
A Problem was encountered while trying to send information over the internet.
My internet is obviously working since this is the same computer...I was getting the error “Registration Unsuccessful”, “A problem was encountered while trying to send information over the Internet” at start-up of "Acrobat 8 Pro" on Windows 8.1.
Setting compatibility on the .exe file to "Windows XP, Service Pack 3" didn't work for me. The problem persisted.
I was told by someone at Adobe support (by chat) to try this, but this didn't work either:
1. Disconnect your Internet connection by disconnecting the cable or by turning off Wi-Fi.
2. Relaunch the Adobe application.
3. When the registration prompt appears, select "Never Register."
4. Connect to the Internet.
I finally made the error at start up go away as follows:
First I found that if I run the Acrobat.exe file as Administrator it doesn't give the error. (I do have to approve a user account control to do this.) I right clicked the actual Acrobat.exe file and selected "Run as administrator". You may be able to also right click the icon on you desktop and do the same.
While running the application as Administrator, I then tried a few things: Clicking “Never Register”, and “Deactivating” and “Reactivating” the license, and then clicking “Never Register” again... while running the application as Administrator. Some combination of those actions seems to have cleared up the problem for when I run the application with normal privileges. -
I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbersMoving this discussion to the Acrobat Installation & Update Issues forum.
-
after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.
Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. -
I have two iTunes accounts. When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
johnfromnorth andover wrote:
I have two iTunes accounts
Why?
When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad. I am trying to link it to the other account instead
You want to uise the newer account with the iPad?
Settings > Store.
Tap account, sign out then sign in with the account you want. -
Really is not icloud that opens. It`s a message that says that icloud has problems to open with one specific account. This happens since I did the last actualization of the operator system open
You don't need to start a new thread - you just use the 'Reply' button at bottom right of the answering post. Anyway as you're here...
You should start by going to System Preferences (or is it called Settings in ML?)>iCloud and clicking the Sign Out button. Then sign back in again. Your iCloud data will disappear from your Mac when you do this (but not from the server) - it will reappear when you sign back in. Alternatively if the message identifies an account which is signed in at System Preferences>Mail, Contacts and Calendars you should log out and in there. -
hi, how can i have a live chat with one of the people from apple so i they can help me with my problem?
https://getsupport.apple.com/Issues.action
-
Problems were encountered during repair of the partition map.
I had too much time on my hands yesterday and I decided to try to remove an unused kernel extension that I saw in my EtreCheck report. The kext was for the PACE iLok, for Pro Tools, which I no longer use. I found the item that was installing the kext and removed it, and EtreCheck reported that the kext was gone.
Some time after that I was troubleshooting another issue I have with Mavericks (shutdown time: my shutdown time with ML was almost instantaneous; with Mavericks, it takes about 12 seconds.), and I used the recovery partition and Disk Utility to repair my HD and permissions.
DU reported that my usual boot volume was OK, and permissions repaired on it without problems.
When I have DU look at the drive itself, it reported: Problems were encountered during repair of the partition map.
And then, in ominous red text: error: live file system repair is not supported.
I tried repairing again, and also got this message: The partition map needs to be repaired because there's a problem with the EFI system partition 's file system.
I tried a few things to get these error messages to go away. I booted with a DiskWarrior disk and it was unable to do the repair.
I did a little reading about the EFI partition, and in Macs it appears to be a partition related to firmware updates.
My mac has not had any symptoms at all during this, aside from the slower shutdown.
Even so, I did not like the idea of a partition that could not be repaired on my HD, so I did a clean install. Seemed to work, DU reported a healthy drive and volume.
This morning, as I was preparing for a TM backup, I ran DU again, and the error messages were back. Not good.
This time I tried TechTool, and it was able to repair the HD from the TechTool eDrive (TechTool's version of the recovery partition).
I've looked in these discussions and there are some mentions of these error messages, but usually in the context of failing hard drives or drives that must be erased and the OS reinstalled.
I'm wondering if anyone can shed some light on this for me, what these error messages mean, why they are occurring, and if I can just ignore them. My internal HD is not a stock Apple drive, but a Samsung SSD that I installed some time ago, and which otherwise works fine. My current suspicions are that either:
there is something inherent in Mavericks that creates some problem with the EFI partition map over time, which then shows up in the error messages in DU
or there is some incompatibility with this SSD and Mavericks that creates the same error messages.
Here's my EtreCheck report:
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:51:29
Disk Information:
Samsung SSD 840 PRO Series disk0 : (512.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) /: 499.12 GB (418.57 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
eDrive (disk0s4) /Volumes/eDrive: 12 GB (4.65 GB free)
HL-DT-ST DVDRW GS31N
USB Information:
MICRONET FANTOM DRIVE 1 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Fantom (disk1s2) /Volumes/Fantom: 999.86 GB (941.3 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
at.obdev.nke.LittleSnitch (4052)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] at.obdev.littlesnitchd.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.raynersw.nshctldo.plist
[loaded] org.cindori.AuthHelper.plist
Launch Agents:
[loaded] at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
iTunesHelper
Dropbox
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Auto backup: YES
Volumes being backed up:
Untitled: Disk size: 499.12 GB Disk used: 80.55 GB
Destinations:
Fantom [Local] (Last used)
Total size: Zero KB
Total number of backups: (null)
Size of backup disk: Too small
Backup size Zero KB < (Disk used 80.55 GB X 3)
Top Processes by CPU:
13% WindowServer
2% hidd
2% EtreCheck
2% backupd
1% com.apple.prefs.backup.remoteservice
1% fontd
1% com.apple.WebKit.Networking
0% Safari
0% cookied
0% coreservicesd
Top Processes by Memory:
131 MB backupd
131 MB Safari
115 MB com.apple.IconServicesAgent
74 MB Dropbox
66 MB WindowServer
56 MB com.apple.WebKit.WebContent
49 MB TechTool Pro 7
49 MB Messages
41 MB App Store
41 MB mds
Virtual Memory Statistics:
4.65 GB Free RAM
1.84 GB Active RAM
370 MB Inactive RAM
1.13 GB Wired RAM
415 MB Page-ins
0 B Page-outs
thanksthis is the list it gives, hope it helps
Verifying and repairing partition map for “ST9160314ASG Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed. -
I have six memory cards that my computer will not download. It says there is an error with one of the photos. Has anyone had this problem and what do I do to fix it? It used to download
What version of iPhoto?
Does this message come on all six cards?
Are these Raw or Jpegs? If Raw, what camera?
Can you access the images on the cards with Image Capture (in your Applications folder?) -
Problem in SQL with CURSOR( ) ,Why the CURSOR did not work?
hi All:
I have a problem in SQL with CURSOR.
The data is as the attachments.
Here is the SQL statement as follow:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
IGLITM
1KV90CPG2
1KV90CPG2
1KV90CPG2
But, after I add one statement in the subquery, there is no record returned from CURSOR.
Here is the SQL statement:
SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
FROM F3102 X
WHERE X.IGDOCO=A.WADOCO
AND X.IGCOST=B.IGCOST
AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
WHERE A.WADOCO='10004'
The statement above returns records as follow:
WADC WADOCO IGCOST DETAIL
WO 10004 A1 CURSOR STATEMENT : 4
CURSOR STATEMENT : 4
no rows selected
Why the CURSOR did not work?
The database version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production.
F3102 DATA:
IGDOCO IGDCTO IGLITM IGCOST
10004 WO 1KV90CPG2 A1
10004 WO 1KV90CPG2 B1
10004 WO 1KV90CPG2 C3
10004 WO 1KV90CPG2 D1
F4801 DATA:
WADCTO WADOCO
WO 10004
Edited by: user2319139 on 2010/3/2 上午 1:17
Edited by: user2319139 on 2010/3/2 上午 1:20Why this structure and not a join?
The cursor() function returns a cursor handle that needs to be processed - in other words, the client needs to fetch data from it. The Oracle® Database SQL Reference+ (http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions005.htm#i1035107) describes it as being equivalent to a ref cursor handle.
Thus why are you creating ref cursor handles as a column in a SQL projection - where each row will have a "+nested+" ref cursor handle to process. What problem are you attempting to hack solve this way? -
"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array. -
"A problem was detected with your serial number"
HELP! Everytime I open Dreamweaver 8, Fireworks, or any other
software package I get the message "A problem was detected with
your serial number." It then gives me the option to retype my
serial number. After I type in the serial number I get the little
checkmark like everything is great. But when I press "Continue" it
comes back with that same message.
I called Adobe support and they said it sounded like my
registration key got corrupted and that I would have to follow
TechNote 4e7826b7 which steps you through removing Studio from the
computer and deleting orphaned files. I've done this TWICE and when
I tried to call Adobe technical support, they sent me to customer
support (with a long hold time in between) and then they sent me to
technical support. When I mentioned I had already passed this
route, the Adobe employee said she would inform the supervisor and
they would get back to me. Guess what. Never happened.
Surfice it to say I'm still getting the message and I don't
want to uninstall a third time because I know the outcome. Does
anyone have any suggestion? Pleeeeeeeease!
Thanks,
Glenn LauderdaleSame problem here. I just hit 'cancel' and the program opens
fine.
Adobe posted a hot fix that allegedly fixes the problem. I've
run the thing several times, and the annoying box still shows up.
You can find it here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_18976&extid=tn_18 976&dialogID=53494061&iterationID=1&sessionID=4830e245130c574b2b37&stateID=1+0+53482525&mo de=simple
I'll keep checking to see if any fix comes up.
John -
When I use Adobe Digital Editions 2.0 to return a library book I get the following message, "If this borrowed item was fulfilled with one or more other items, returning it would also return all of these items". What does this message mean?
Might want to have your MacBook looked at.
-
With one of the last updating in Adobe Reader,in the "recently read" section,it's no more possible delete the last pdfs read. Can that be changed? Before in fact there was a specified button for that!
Hi,
The 'Clear Recents' button which was provided in previous releases only *cleared* the Recent list and did not delete the files. The files stayed in your document hierarchy. This button has been removed in the latest release. For deleting the files, you can go to the Documents/Acrobat.com tab and delete the files individually. However, please note that the files will be permanently deleted from your device. Please let us know if this is not a viable option for you. We would like to hear more about your use case for which you would require to just remove the entry from Recents and not delete the file. You could share the feedbacks here.
Thanks,
Shefali -
my iphoto library database was corrupted with one image taking over every other image on the database
i purchased aperture and am in the process of copying my i photo library , i ticked no to importing duplicate images and yet it is still importing many duplicates including the photo which took over my old iphoto library
help how can i stop it from importing the duplicates?my iphoto library database was corrupted with one image taking over every other image on the database
What exactly do you mean by that? Do you mean one thumbnail only was visible in the iPhoto Window? What? This is the sort of thing that's fixed easily by an iPhoto rebuild. Gives us some more information and we may be able to help with that - iPhoto version and a description of exactly what's happening will help.
i ticked no to importing duplicate images and yet it is still importing many duplicates including the photo which took over my old iphoto library
A couple of thoughts here: If the iPhoto Library is corrupted and Aperture is importing from this damaged Library well you can't expect that it will all go easily, can you?
The iPhoto Library contains two versions of edited photos. Are you sure that you're not seeing the second version?
Regards
TD
Maybe you are looking for
-
I would like to do this, but I just want you to know that I am not an expert so some things I would like you to be clear on.
-
How to quit authorization in a stoled laptop
My Sony vaio laptop has being stoked, there I used to have configurations for 3 iPods and 1 iPhone How can I quit permission on that laptop to get into iTunes ??
-
Regarding tcp/ip server side
Hello all, hope its not too irrelevant to the labview. I have gone through "simple data client.vi" and "simple data server.vi" examples, want to replace simple data server.vi with a simple c program on a different computer. Can someone please hint me
-
Trying to decide between MacbookPro & iPad 2
Hi all- I'm starting high school next year and I am trying to decide between purchasing a MacbookPro and a iPad 2. I just need something to take notes on and I must have iWorks on it during the day, and for travel. I have access to an iMac at home wh
-
way too much garbage about show biz and antics of stupid actors. who cares ???