A problem when start web dynpro application....

each time I start web dynpro application, I always be asked to provide username and password,
but one of my colleague was only ased that for the first time.......
it puzzled me very much, anybody helps me out?

the box is checked by default , isn't it.......
but it seems that the checkbox is not work.....i still have to asked to provide username/password
thanks for your answer..

Similar Messages

Authentication Screen when accessing Web Dynpro Application

Hi,
We are encountering a situation wherein when we call the Web dynpro application, it asks for Authentication. The way we do is a bit tricky. We have the following set up;
1. We access the CRM_IC ( Web Gui) in CRM and from where we try to create orders in the backend system i.e., ECC6.0 (IS_Utilities).
2. For creating orders we launch the FOP ( in our case it is DYNPRO) from CRM. So ECC screen is opened through ITS using SSO.
3. In addition to this we built a web dynpro application to be called from the DYNPRO (step 2).
4. When the Web dynpro application is accessed it asks for Login details though it has already logged into ECC using SSO.
PROBLEM: CRM -- using ITS / SSO --> ECC --> Web dynpro ?? Authentication screen.
Design:
We are using WDY_EXECUTE_IN_PLACE to open the Web dynpro in SAPGUI. It is working fine when we run the Web dynpro application from SAPGUI, only the problem is when we do the above steps 1 - 4.
Tried using the following logic as well but the same result.
CREATE OBJECT viewer EXPORTING parent = empty_container.
CALL METHOD viewer->enable_sapsso
CALL METHOD viewer->DETACH_URL_IN_BROWSER
EXPORTING url = urlc.
cl_gui_cfw=>flush( ).
So is it possible to over come the problem. Basically, we don't want the Authentication screen it should use SSO.
SSO is already set up in the system.
Any inputs will be highly appreciated.
Thanks,
Roopesh

resolved!!!!
CRM had wrong url to connect to web dynpro aplication
Edited by: Aditya Deshpande on Mar 3, 2010 9:59 AM

Uncaught exception when executing web dynpro application

Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anil

Dear Anil,
What type of WD is it ?
Do you get the error when you trigger some sort of event ?
Is it when first launch the WD ?
Can you be more specific and share with us the code where this is dumping ?
You can also check this link
[CX_WDR_RT_EXCEPTION' - How to catch it?;
Kind Regards
/Ricardo Quintas

How to customize error mess, when an Web Dynpro application Deployed

Hi Frndz...
When we r deploying any web dynpro application , if there was any error in that WDP application its showing an error page the list of errors with HOST name n patch level n OS details n so many n with the line number of that error in the code.. Normally.
But as my requirement i need to restrict the HOST,OS ,PATCH details in this list to avoid the security issues.
If anybody have any idea plz share with me...
Regards
Rajesh

Hi..
Thank u boss, ur reply was very helpfull to sort out our requirment.
Regrads
Rajesh

Problem deploying sample web dynpro application.

I am not able to deploy and run a sample code of Web Dynpro. It gives the following error.
<b>Caught exception while checking the login credentials for SAP J2EE Engine. Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
</b>
I am able to log in to SDM using the same password but not deploy the code.
I have also tried restarting the server, SDM.

Hi,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Now you deploy.... Otherwise see this thread same problem but solved.
Re: An Deploy Problem about Credentials.
Regards
Suresh

SDM Error when Deploying Web Dynpro Application

Hi,
My SAP SDM server gives error while, I deploy any .ear file through NWDS. Error is as below:
Jul 29, 2008 4:22:29 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [ThreadDeploy Thread,5,main] ERROR:
003Deployment aborted
Settings
SDM host : server2
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/gyan/LOCALS1/Temp/temp16971gyan.ear
Result
=> deployment aborted : file:/C:/DOCUME1/gyan/LOCALS1/Temp/temp16971gyan.ear
Aborted: development component 'gyan'/'local'/'LOKAL'/'0.2008.07.29.16.22.26':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: server2 with user name: J2EE_ADMIN Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted.
i have same password for SDM and J2ee_admin.
Regards
Gyan

Hi Gyan Prakash,
I Faced Similar when iam working on NWDS, nothing to worry about it just Delete the Application which you have created for your Project
you find your application as follows:
proj_sample --> webDynpro --> Applications --> proj_sampleApp.
Delete the proj_sampleApp.
save all metadata. Rebuild your Project. Restart your NWDS.
create your New Application for your WebDynpro Project, rebuild your project and Now Deploy and Run your Project.
This will solve your Problem.
Regards,
Sharma.

Problem with starting the Web Dynpro Application

Hello,
I have a problem with my web dynpro application, which is in our SAP Portal. We have three different systems (development, test, production). In production always the follewing error message occurs:
The URL https://zsil2401.servers.wacker.corp:9004/sap/bc/webdynpro/sap/ZPLM_EN_FORM_300MM/ was not called due to an error.
Note
The following error text was processed in the system P1A : is not a valid attribute type.
The error occurred on the application server zsil2401_P1A_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GETATTRIBUTE_RTTI of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: INIT_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: CREATE_FROM_STRUCT of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IFWDR_RG_CTRL_HANDLE~INIT_CONTEXT of program SAPLWDR_RG_GENERATED_SRC_API
Method: IFWDR_INTERNAL_API~INIT_CONTEXT of program SAPLWDR_RG_PROXY_FACTORY
Method: CONSTRUCTOR of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: IF_WDR_CLASSLOADER~GET_COMPONENT_CONTROLLER of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: CONSTRUCTOR of program CL_WDR_DELEGATING_COMPONENT===CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Some User get this message also in test an development. What could be the reason?
Note: Nothing has changed in coding or context.....this error occurs without any changements
Thanks for your help
Best Regards
Martin

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Web Dynpro Application Deployment need server restart?

Hi Everyone,
When deploying Web Dynpro application on production environment, do we need to restart the sap portal system and server?
I have this issue that when ever we deployed new develop Web Dynpro application with new Abap Function module we need to restart our Enterprise portal production server. Is this really necessary. Is there other way to deploy Web Dynpro application with new Abap function module without restarting the server.
Please help,
Michael Mondelo

Hi michel,
for example , assume you imported a RFC bapi_flights from r/3 to webdynpro dc , and both rfc requests and webdynpro application is deployed to the development server and then moved to quality server.
now you have done some changes in the rfc bapi_flights i mean change in the structure .
case 1 : now with out reimporting the change to webdynpro application and you move the request to the quality r/3, your application dumps . because the structure change is not incorporated at your webdynpro DC.
case 2 : you have re imported the rfc incorporating the changes to the web dynpro applicaiton dc, now with out moving the structure changes request to the quality r/3 and you deploy the webdynpro Dc having the changes to your quality EP , still the applicaiton dumps because your appliction refers to the rfc with out structure change in quality r/3.
case 3 : you have moved the abap request having the strucutre change and also the webdynpro development component where the changes are also incorporated , now on moving both , your application might dump , because the meta data cache might have been not updated with the new structure change in the quality ep server. so you have invalidate the cache in the JCos you have used to import the rfc. or else on restarting the EP server , the new structure change will be updated in the server.
most of the cases Invalidation of cache works and in some cases you have restart the server fo the changes to update.
Regards
Govardan Raj

Uncaught exception while executing web dynpro application

Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anil

Hi Anil,
I'm also getting the same run time error. When I try to activate the Web Dynpro component, I'm getting error that the component is locked by the user.
Please let me know how you solved this issue.
Thanks in advance for the quick response.
Thanks & Regards,
Jay

Exception not caught while executing web dynpro application

Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anil

sorry...posted in wrong forum...

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

Problem with FQDN when creating Web Dynpro App

Hi @ all,
when create a WDA the url is set like this: HTTP://SAPVM1:8000/sap/bc/webdynpro/sap/z_wda_sample.
I defined the icm/host_name_full and the SAPLOCALHOSTFULL correct*, but it did not work. I have also restarted the system more than one time. I searched a lot, but found no solution here on sdn.
*correct means : sapvm1.mydomain.de
Even if I try to start a default wda example the wrong FQDN is set. But if I start the wda at the SICF (test service) it works, the FQDN is set right.
thx in advance.
Timo

Hi,
it seems that the httpurlloc table was the problem. The host entry in this table was no FQDN, I changed it into FQDN and it works. Now the generated url of the web dynpro applications is correct.
Maybe this helps somebody else.
See also
http://help.sap.com/saphelp_nw70/helpdata/en/42/d547ab30b6473ce10000000a114e5d/frameset.htm
Timo

Problem with HowTo guide - Use the BI Java SDK in a Web Dynpro Application

Hello,
I am following the HowTo guide - Use the BI Java SDK in a Web Dynpro Application
at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f">this link</a>.
I have configured the connector on the WAS as needed.
The problem is that when I run the application I receive an Unauthorized error on the connector URL.
If I open this URL on a browser I receive a pop-up for UID and PWD and when I enter the same UID and PWD I used to configure the connector I am able to login and see the WSDL.
Any ideas?

I've never tried using BI in WebDynpro !!!
But i foond one posting on the connection problem https://forums.sdn.sap.com/click.jspa?searchID=955524&messageID=2133396
Regards,Anilkumar

Problem in Closing a web dynpro application

Hi experts,
I wanted to close the application when the user clicks on the close button.
I created a out bound plug "EXIT" of type 'EXIT' in my window.
I also created a parameter "CLOSE_WINDOW" of type "WDY_BOOLEAN" for the outbound plug
Now in action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog = wd_this->get_ywd_maintain_catalog( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
where ywd_maintain_catalog is my window name.
when i check the program i am getting the below error:
get_ywd_maintain_catalog_ctr is unknown or protected or private.
I refered the standard web dynpro component "WDR_TEST_EXIT_PLUG" to implement the logic
Pls help
Regards,
Vinod

Hi all,
This is my requirement when i click on a close button the application should close.
i refered to a web dynpro component "WDR_TEST_EXIT_PLUG" where they have explained the way to use exit plug.
They have created a outbound plug in the window called "EXIT" of type exit. and in the action of the button they have used the below code to fire the outbound plug.
method onactionfire_exit .
data: l_ref_wdr_test_exit_plug type ref to ig_wdr_test_exit_plug .
l_ref_wdr_test_exit_plug = wd_this->get_wdr_test_exit_plug_ctr( ).
l_ref_wdr_test_exit_plug->fire_exit_plg(
url = 'http://www.google.de/'
endmethod.
I followed the similiar approach in my code:
I created a out bound plug "EXIT" of type exit in my window.
then in the action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog =wd_this->get_ywd_maintain_catalog_ctr( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
The problem i am facing is i am getting the error "method get_ywd_maintain_catalog_ctr is unknown or public or private"
I am referred to the below URL to do it :
link: [Exiting a Web Dynpro Application by pressing a button on a Web Dynpro View]
Regards,
Vinod

Value hep problem in web dynpro application

Hi All,
I have a requirement where I need to add a field for alternate payee to the web dynpro application and the field name is BSEG-EMPFB. I have written the following code to get the values of it based on the vendor number:
SELECT SINGLE * FROM lfb1 INTO f4lfb1_z
                  WHERE lifnr = lv_lifnr
                  AND   bukrs = '001'."bseg-bukrs'.
CALL FUNCTION 'FI_VENDOR_ALTERN_PAYERS_READ'
    EXPORTING
      i_lifnr            = lv_lifnr
      i_filkd            = filkd
      i_bukrs            = '001'
      i_lfb1_head_office = f4lfb1_z
    TABLES
      t_zemtab           = t_zemtab.
LOOP AT t_zemtab INTO w_zemtab.
    ls_value_set-text = w_zemtab-empfb.
    ls_value_set-value = w_zemtab-empfb.
append ls_value_set to lt_value_set.
DATA lo_nd_alt_payee_info TYPE REF TO if_wd_context_node_info.
DATA lo_nd_alt_payee TYPE REF TO if_wd_context_node.
lo_nd_alt_payee = wd_context->get_child_node( name = wd_this->wdctx_alt_payee ).
lo_nd_alt_payee_info = lo_nd_alt_payee->get_node_info( ).
         lo_nd_alt_payee_info->set_attribute_value_set(
            name = `ALTERNATE_PAYEE`
            value_set = lt_value_set )
Now the problem is user wants the details of the alternate payee as F4 help and when I debugged the standard FV60 functionality this how the F4 help is being build therE:
REFRESH fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'EMPFB'.
fldtab-selectflag = 'X'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'NAME1'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'ORT01'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'STRAS'.
APPEND fldtab.
*------- Fill Values for Function Module Call --------------------------
REFRESH valtab.
LOOP AT zemtab.
    valtab-feld = zemtab-empfb.
    APPEND valtab.
    valtab-feld = zemtab-name1.
    APPEND valtab.
    valtab-feld = zemtab-ort01.
    APPEND valtab.
    IF zemtab-stras NE space.
      valtab-feld = zemtab-stras.
    ELSEIF zemtab-pfach NE space.
      CONCATENATE 'Postfach:'(019) zemtab-pfach INTO valtab-feld.
    ELSE.
      valtab-feld = space.
    ENDIF.
    APPEND valtab.
ENDLOOP.
*------- F4 Dialog -----------------------------------------------------
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      display      = space
      fieldname    = 'EMPFB'
      tabname      = 'INVFO'
    IMPORTING
      select_value = empfb
    TABLES
      fields       = fldtab
      valuetab     = valtab.
IF NOT empfb IS INITIAL.
    invfo-empfb = empfb.
ENDIF.
can you please tell me how can I accomdate this in the web dynpro application?
Thnaks,
Edited by: rajatg on Jul 13, 2011 6:41 PM
Edited by: rajatg on Jul 13, 2011 6:42 PM

Hi Raja,
Search help is availble at dictinary level you get F4 help automatically.
Otherwise create OVS help for alternate payee. use WDR_OVS.
check this..
http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
Cheers,
Kris.

A problem when start web dynpro application....

Similar Messages

Maybe you are looking for