A problem when using a data element in BAPI
Hi there,
I build a function module, and want to use it as a BAPI. But when I add the function module as a method of a BAPI object, it gives me the following error: data type xxxxx cannot be used for methods.
I guess the problem happens because of the type of data element I used for the input parameter of the function module. Thus I tried many other data elements, but I keep getting the same error. I am really out of the game. Could anyone tell me which data element I should use for the input parameter of the function module? The function module has only one input parameter, which should be a string with length less than 100.
Thank you so much!!
Sincerely,
Bing
The function module has only one input parameter, which should be a string with length less than 256. (I tried many predefined data element like RPLM_STRING, but when I tried to add the function module as a method of BAPI, the SAP always gave me the error: data type xxxxx cannot be used for methods)
It only has one output parameter: RETURN (associated type: BAPIRETURN)
I am really not familiar with ABAP program, let alone BAPIs. Any suggestions would be very helpful to me. I sincerely appreciate your help.
Bing
Similar Messages
-
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks PeteHi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete -
I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, SwedenUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
How to avoid the split problem when uploading the data from csv file
Dear Friends,
I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
SPLIT wa_raw_csv AT ',' INTO
wa_empdata_csv-status
wa_empdata_csv-userid
wa_empdata_csv-username
wa_empdata_csv-Title
wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR" wil not be split into two words.
Thanks & Records
MadhuriHi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin -
We use IE9.
I enter in https://gwserver.
Compose New mail (in Plain Text mode) with body:
Line-1
Line-2
Line-3
And send this mail , for example to itself.
the received letter will look like:
Line-1Line-2Line-3
Someone has the same problem?
SergAre you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
Or simply tell your users to user HTML.
Todd Bowman
Todd Bowman
Senior Network Analyst
University of Minnesota Physicians
612-884-0744
[email protected]
>>>
From: MarkDissington<[email protected]>
To:novell.support.groupwise.2012.web-access
Date: 5/24/2012 6:46 AM
Subject: Re: Problem when using IE9
skoltogyan;2197344 Wrote:
> The solution is?
>
> Serg
I would guess don't use IE9 until a fix is released? :-)
M.
MarkDissington
MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
View this thread: http://forums.novell.com/showthread.php?t=455634 -
Problem when using Javabeans in ADF?
Hi,
I encountered a problem when using ADF.
Please look at the following 2 classes :
public class Person
private String name;
private String city;
private int age;
public Person(String name, int age, String city)
this.name = name;
this.age = age;
this.city = city;
public Person()
public void setName(String name)
this.name = name;
public String getName()
return name;
public void setAge(int age)
this.age = age;
public int getAge()
return age;
public void setCity(String city)
this.city = city;
public String getCity()
return city;
public class PersonFactory
public PersonFactory()
public List getPersons()
List list = new ArrayList();
list.add(new Person("peit", 18, "dalian"));
list.add(new Person("robin", 22, "shenyang"));
list.add(new Person("Joe", 30, "York"));
list.add(new Person("Edi", 23, "Beijing"));
return list;
public List getNames()
List list = new ArrayList();
list.add("Peit");
list.add("Robin");
list.add("Joe");
list.add("Edi");
return list;
public void commit()
System.out.println("Data commited");
I created the PersonFactory class as DataControl, so I can use the getPersons() and getNames()(just for test, so they are simple), I drag the names from
the DataControl palette as Table in a JClientPanel, good luck, it works and displays the 4 Strings in a table, but when I drag the persons from
the DataControl palette as Table in the same JClientPanel, it does not work and raises exception :
java.lang.NullPointerException
at javax.swing.JTable.prepareRenderer(JTable.java:3731)
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:1149)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1051)
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
So, I confused why? How to edit it properly?
Thanks.
Message was edited by:
[email protected]Hi, Frank
Thank you for your reply.
I am sorry for not explaining well. I mean that the getNames() works fine, but getPersons() does not. The only diferenece between them is the former is simple string and the latter is javabean, but when I made the PersonFactory as DataControl, I set the bean class Person for the getPersons()(list of persons) bean class.
I debuged the class, the exceptions raised when the table for getPersons() setModel() method called.
So, where is the problem?
Thanks. -
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice. -
Problem when using About Operator in Contains Query
Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id NUMBER(10) NOT NULL,
name VARCHAR2(200) NOT NULL,
description VARCHAR2(4000) NOT NULL,
price NUMBER(7,2) NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AMHello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck! -
When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers
Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords -
Coercion problem when using Shared Variable
I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip 38 KBHello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments -
NLS support problems when using AL32UTF8 in dads.conf
Hello,
Following a post by Joel Kallman, in one of the forum threads, about the mandatory use of AL32UTF8 in dads.conf, when running HTML DB v2.0, I changed my PlsqlNLSLanguage parameter accordingly.
Prior to the change, I experienced some problems when using non-English characters some application items appeared as gibberish when contained non-English characters, and the LIKE operator didn't perform as expected. After the change, it all seems to work OK, but now I have a different problem.
All the non-English characters in my HTML page source code appears as gibberish. On screen, at run time, everything display correctly, but the source code seems to be corrupted. It is very difficult, and very annoying to debug the pages that way. Is there a way to enjoy both worlds Using AL32UTF8 in the dads.conf, as required, and still getting a coherent HTML source code, containing non-English characters?
Thanks,
Arie.Joel,
I use the following settings and they work fine for me:
Operating system:
LANG=de_DE
LANGVAR=de_DE.UTF-8
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
daust:oracle[o1020]> uname -a
Linux daust.opal-consulting.de 2.4.21-37.EL #1 Wed Sep 7 13:35:21 EDT 2005 i686 i686 i386 GNU/Linux
daust:oracle[o1020]> cat /etc/redhat-release
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
daust:oracle[o1020]>
marvel.conf:
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString localhost:1521:o1020
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword @BZvJYqadreElOqj5poCB5gE=
Allow from all
</Location>
Database:
daust:oracle[o1020]> sqlplus "/ as sysdba"
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0####################
Using AL32UTF8 resulted in the same problem as described ( and fixed ) here: Re: Strange - HTML not written correctly
So, what is the proper configuration of the DAD, perhaps there are different ones for Unicode instances and non-Unicode instances.
~Dietmar. -
i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file? -
How to use '*' as data Element in the NTE(Edi 850) Segment
Hi All,
I am facing a field level error while using '*' in EDI 850 (NTE segment). '*' is also used as Data Element.
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
I have asked this question before
http://social.msdn.microsoft.com/Forums/en-US/1668e8d8-ee99-4d79-961b-8d26f3a496f8/error-while-using-in-the-nte-edi-850-segment-where-is-also-used-as-data-element?forum=biztalkediandas2
The answer in the above forum was to ask client modify the EDI message.
Previously, our client was using a different technology (other than BizTalk) which was working fine with this format. So, they are insisting on this format only.
Thanks,Sorry, the answer is the same.
It doesn't matter what EDI platform either side is using, the '*' in the field content conflicts with the '*' that is the element delimiter. That is invalid EDI, there is no way around that short of writing a custom EDI parser.
It's not clear if you're sending or receiving this message. But again, it's really doesn't matter.
1. Change the Element Delimiter to something other than '*'. < or > are not uncommon.
2. If you are receiving the EDI, create a custom Pipeline Component that "handles" NTE02 either by replacing the '*' with a substitute char or deleting it.
3. If you are receiving, you could add extra elements to NTE to accommodate extra fields (since that's how the parser will see them). Then you can join them again in a Map. -
Performance problem when using CAPS LOCK piano input
Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim MetzDoes your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?
Maybe you are looking for
-
How Can I Add mod_ssl to Built In Apache Server?
Hi, I would like to add mod_ssl as a DSO module to the Apache web server that comes with Solaris 9. However I have been unable to find any decent instructions on how to do so. Any help would be appreciated. I have included below a post I have made to
-
Lines Not Converting From Autocad to Pdf
I am using Windows 7 Pro, Autocad 2011 (full version), Acroplot Pro 2013 and Adobe Acrobat Pro. Using Acroplot Pro, we convert Autocad files to pdf. We are having issues with some lines, or entire sections of a drawing, not converting to pdf file. As
-
Why is the Video Filter "Shift Fields" Automatically being added to my clips?
In the timeline, I've been noticing that FCP is randomly adding the "Shift Field" video filter to about 75% of all my clips in the timeline. Is this common? JS
-
FM HR_INFOTYPE_LOG_GET_DETAIL
Hi Expert, I would like to use this FM to get the infotype value change befoer and after. But I am not sure what value should use as the importing parameter. For example, I would like to get the change detail of infotype 0008 on 09.02.2010 Relid_pcl4
-
Dear All While trying to complete Sub contracting challan in t code J1If13 i am getting the following error in ECC 6.00 "Excise modvat accounts not defined for 57NR transaction and 01 excise group" Message no. 8I402 Kindy guide me. Shobana