A problem with a sound.
I have a problem with a sound. No sound in my macbook speakers when its working. No devices is shown in Input/Output in sound preferences. However i still here sound when mac is launching and it's working with USB Headphones (But no with a minjack hedphones).
Sometimes the micro switch inside the headphone socket gets stuck. Look inside the socket - if you can see a red light, that's what's happened.
To unstick the microswitch, plug and unplug a headphone jack into the socket 20-30 times. If that doesn't work, use a non conducting probe (like a toothpick) to gently reach inside the socket and flick the switch
Bob
Similar Messages
-
Having problem with Ipod Sound
I am having a huge problem with the sound for my Ipod. I was recently at a concert and using my car audio conversion in both my Ipod and my girlfriends, when I unplugged it from hers to mine I lost all sound to my Ipod when I plug in my headphones now or when I put the receiver back into the bottom. I have reset and restored it and run the diagnostics check to see if it could be the USB or the headphone Jack. Both are in working order but I am still not getting any sound to my Ipod. Can anyone help me with this problem? My Ipod is my life staple for my morning commuet.
You can try to following to rule out/fix a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Problems with the sound in Windows
Hey everybody, hoping someone can help.
I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
I have tried various display settings. I have no idea if this is just me or a common problem.
Thanks in advance...
MacBook Pro 2.16 GHz Intel Core 2 Duo Mac OS X (10.4.8)This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
MAC PRO Mac OS X (10.4.9) -
I am having problem with my sound, after i updated to ios 6, apple please help
i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help
Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues. -
After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq
Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues. -
Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?
Hey grossa2,
First, here is a way to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Then, I'd go through this article, which helps troubleshoot a lack of audio playback in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Take care,
Delgadoh -
I have a problem with the sound and voice communication programs amplifier
I have a problem with the sound and voice communication programs amplifier
Define "voice of the device."
Are you referring to the ear speaker or main speaker? Phone calls? Rings/alerts? Music?
What troublshooting steps did you take? -
Problems with microphone sound in iChat
Hello Ralph,
(I already thought I sent this but I didn't see it as a new topic, so I am trying again). I'm new to this discussion thing, it's my first time so I hope I've submitted this correctly.
I have similar, but extended and more complicated problems with "microphone sound in iChat". (Sorry, this email is a bit lenghty becuase I have already done a lot of my homework on trouble shooting this.)
I began by using iChat with a high impedance microphone (from an old 1970'scassette player) PLUGGED DIERCTLY IN THE THE MICROPHONE INPUT on the back of my G4 tower. (I DO NOT have a video camera). My Mom in Canada can hear me okay on it, only if I "eat" the microphone. (My Mom DOES have a video camera).
SO I BOUGHT AN iMic. I also bought a new condenser mic to go with my new iMic. I plugged iMic in and adjusted the sound preferences selection. I switched the iMic to "Mic". It did not work. The old cassette mic did not work at all with iMic either. My Mom could not hear me, and my "VU METER bar levels" on my iChat were not registering. (If I plug the condenser mic directly into the tower, Mom can hear me only if I "eat" the condenser microphone).
Next, with iMic, I wanted to try my Shure 58 microphone instead. My friend (who is an audio tech) made me a 1/8" to XLR (sheilded) cable. I made sure I had adjusted the sound preferences and switched the iMic to "Mic". The Shure 58 did not work with iMic. It also did not work plugging directly into the tower.
Next, with iMic, I wanted to try my "Plantronics telephone headset". My friend (the audio tech) then made me a 1/8"male to 1/8"mini feamle (sheilded) cable. My headset did not work with iMic. It also did not work plugging directly into the tower.
My friend, the audio tech, then made me second cable 1/8"male to 1/8"female (sheilded) cable. This cable I had him make 50 feet long so I could move to other areas in my home while audio chatting - so I don't have to be trapped in my office while talking. We ran the cable from iMic to the Old cassette mic and the new condenser mic. They did not work with iMic.
We also tried plugging the new 50ft cable directly into the back of the G4 Tower and it worked with the old cassette mic and the new condenser mic, BUT the volume was reduced and there was a loud baseball game being broadcast through the cable - according to my Mom. I could not hear anything from my end - not my own voice and not the baseball game! IS THERE A WAY FOR ME TO MONITOR (actually hear) THE SOUND THAT SHOULD BE COMING THROUGH THE MIC?
I have tried to trouble shoot these issues on line, but can't seem to find the right solutions. In one of your discussions I read that you suggested to select the iChat preference for Video and select microphone. I CANNOT SEE THE FULL WINDOW UNDER iChat Video Preferences!!!! All I can see is the top half of a large empty box that says "There is no camera attached to this computer". (That's because I have no camera, but I DO HAVE a microphone).
I also found some support about adjusting microphone levels using iMovie. I do not have iMovie on my Mac.
Yes, I have already adjusted the AUDIO MIDI SETUP settings.
My audio tech friend and I are both baffled. iMic is useless to me so far - perhaps you can help to get me up and chatting properly? Do I really need iMovie and/or a video camera to fix this???
BY THE WAY: When I plug my external speakers into iMic and select iMic in preferences for output, my speakers and sound is very inferior to the using the speaker terminal on my tower. i Mic is supposed to better???????
Thanking you for your help in advance,
Marlene
(Please could you, would you, email a copy of your answer to me at [email protected])
G4, 450Mhz Mac OS X (10.4.6)
G4, 450Mhz Mac OS X (10.4.6)
G4, 450Mhz Mac OS X (10.4.6)Hi Ralph,
A funny thing just happened...
The iChat prefernce window for "VIDEO" finally opened (!!) all the way, so for the FIRST TIME EVER and I was able to see the microphone setting at the bottom of the window. (Because I have NO CAMERA, the window would never fully open before during the 100 or so times I tried to get it to open before. This must've been a fluke because now it won't fully open again).
While it was open I set the microphone setting to iMic, plugged my condenser mic into iMic and IT WORKED. Then I tried the long (baseball game) extension cord in the iMic (attached to the condenser mic) and IT WORKED TOO - with NO BASEBALL GAME!
I still have to have the condenser mic right up to my mouth, which shouldn't be - but considering I have spent a few weeks trying to troubleshoot this, "eating the mic" is only a minor annoyance at this point.
I just plugged my speakers into iMic and THEY WORK GREAT!
SO ALL MY PROBLEMS WERE BECAUSE: I could not set the microphone under Video in iChat preferences because the VIDEO PREFERENCE WINDOW DOES NOT FULLY OPEN WITHOUT A CAMERA ATTACHED. If it hadn't opened by fluke my iMic would still not be working.
I guess I'm all set now. Unless you have a suggestion why the condenser mic isn't picking up my voice from other than right by my mouth? It should be able to be a foot or two away at least.
Thanks Ralph,
Marlene
(By the way, I never did trash the com.apple.ichat.plist)
G4, 450Mhz Mac OS X (10.4.6) -
Hello everyone,
So here for 2-3 days, the sound of my Macbook starts beuguer (buy in October 2014). So when starting the mac when I listen to music all goes well, I can adjust the sound using the keys on my keyboard, and when I ca defois support appears to me that the sound is cut off, I think it 'is a problem with the sound card. But as soon as I plug in headphones, not set I have to go through the system preferences. By unplugging the problem remains the same on his fate, but impossible to resolve through the keyboard. I tried to put the volume icon on the top bar but even by setting it does not work here. The problem resolves itself after 30 minutes-1 hour. It's very annoying. Thank you in advance for your answers.Hi, Dolve
This could be either hardware or software, so let's start with trying to get all drivers and software up to date. This page has updates for all your system. I would recommend getting at least your latest audio driver and BIOS downloaded. Following the installation, try using your sound again and see if the issue still persists.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
PROBLEM WITH MY SOUND CARD .......H.P IS REALLY NOT GOOD.....!
I PURCHASE HP PAVILION DM4 2000 SX ONLY 2 WEEK AGO AND I HAVE PROBLEM WITH MY SOUND CARD WHEN I REMOVE HAND FREE THIS MACHINE QUITE AND AGAIN PLAY VIDEO SONG ETC THAN COME SOUND ....!
ANY 1 HAVE IDEA WHAT PROB WITH THIS....!Did you download and install the latest Realtek Audio drivers from the Realtek site?
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Accept the agreement. Download and install the first or second driver on the list depending on whether you installed W7 32 or 64 bit.
If that doesn't work, I don't have any other suggestions for you to try.
Paul -
Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?
Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck -
TS3274 i have problem with the sound not working
i have problem with the sounds not working
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod/Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?
The problem isn't solved after the restore, shall I bring my phone to the AppStore? Will they give me a new one? Or I should pay for that. Warranty is until December 2013;)
-
Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Problem with skype sound on headset
Hi. I have a problem with skype sound on my headset, when im talking to my friend I can hear him on my headset while the rest of the sound is on my speakers. How do i change that so i could hear all sounds on my headset?
Solved!
Go to Solution.Hi rajababu3455, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
This will help us investigate and solve the problem you are experiencing.
Thank you
Maybe you are looking for
-
Using DBMS_LOCK in function gives error
Dear Guru's I need to use the DBMS_LOCK.sleep. Hence to get more info i searched the forum and I found this code from the forum CREATE OR REPLACE FUNCTION sleep (secs_in IN INTEGER) RETURN NUMBER is BEGIN DBMS_LOCK.sleep(secs_in); RETURN secs_in; END
-
Special stock and movement type
Good morning to all, I create a type movment copyed from the 262 but I don't need to post in special stock for this movement. Is possible do disable special stock posting for a movement type? Thanks in advance to all Best regards Carlo
-
Code Style - Line Wrapping - JSPX files
JDeveloper 11.1.1.0.2 I've got my Line Wrapping Line Width set to 180 and this works for my Java code but not for my JSPX files, which continue to break at 80 columns. In previous releases of JDeveloper my JSPX code would also wrap at 180, but I cann
-
Best forms creator for my business
Hi, I would like some advice on what option is best for my business. I primarily would like to create interactive forms that are sent out to job seekers in which they can answer questions and send back to us, being an employment agency. I need the l
-
I tried to reinstall my pavilion dm4 OS (win 7 home). I backed up personal items and then (1) Restarted and held down the Esc key, (2) chose F11 for System Recovery and then chose to install the minimum system. The process reformatted the drive, whic