A problem with BToes and it´s x64 driver

I have bought the BToes ver. 365 and I have a winxp x64 system. When I connect the BToes to my computer, winxp x64 automatic chooses the drivers (Blutonium BCM2035 Bluetooth 2.4 GHz Single chip Transceiver and Microsoft Bluetooth Enumerator). I can say that file transfer between my computer and my cellphone works with this.
I have downloaded the btdongle_XP64bit.zip. When I try to update the Blutonium BCM2035 Bluetooth 2.4 GHz Single chip Transceiver I get the message that The specified location does not contain a compatible software driver for your device. If the location contains a driver, make sure it´s designed to work with Windows for x64-based systems. And when I try to update the Microsoft Bluetooth Enumerator I get the message that Installing this device driver is not recommended because Windows cannot verify that it is compatible with your hardware. If I choose to intall the driver I get a yellow exclamation mark beside the MSI USB Bluetooth Device in computer management and with the error This device cannot start. (Code 10).
Am I doing something wrong?

Jerry,
I had two objects:
ZDWIP_AUX is in comm structure and datasources
ZDWIP_REM is in Cube and Update Rules (the routine mentioned ZDWIP_AUX)
I deleted ZDWIP_REM from the cube and from catalogue.
Automatically removed in update rules.
ZDWIP_AUX is unmovable from comm structure and can't be deleted because it says that is in use by a routine that I can't see.
By recreating IObject do you mean, recreate all the scenario and remove in a different, like first the clean the recreated routine?!

Similar Messages

Problems with Itunes and Windows 7 x64

When I upgraded to Windows 7, Itunes no longer recognized my computer as one of the authorized ones from someone else's Itunes. The worst part is when I authorized my computer for the other person's Itunes last time, I was the 5th person to do so. Now I'm stuck because I can't just reauthorize my computer because it says it reached its max number, even though I'm not authorizing a new computer. Can someone give me an idea of what to do?

Is that ASUS rather than ISUS?
If so, I think I've found info on the motherboard ... if so it doesn't have the P55 or P55M chipsets that can be cranky on Windows 7 systems with iPod/iPda/iPhone connections.
Still, we'd better make sure your BIOS and chipset drivers for the board are up to date. Head to the following page at ASUSTek and use the Navigation Wizard to autodetect your motherboard version. Check to see if there are any BIOS updates, chipset driver updates or other driver updates available for it (say, integrated audio, display adaptors, raid controllers, etc):
http://support.asus.com/download/download.aspx?SLanguage=en-us
If you're behind on anything, and you update, does that improve your syncing performance?

Problems with Pages and Numbers using iCloud Drive on early 2008 MacPro, Yosemite

One of my computers, an early 2008 MacPro running Yosemite, will NOT save Pages or Numbers documents to iCloud Drive from within those applications. I see the little iCloud Drive error badge next to the file name in Finder after I try to save. However, on the SAME computer I can save Pages and Numbers documents to a local drive (e.g., to my Desktop) and then use the Finder to drag the documents to iCloud Drive successfully. Another computer, a MacBook Pro running Yosemite, has no problems using iCloud Drive to create, edit and then save Pages and Numbers documents stored on iCloud Drive. I have tried "turning off" iCloud Drive for Pages and Numbers in System Preferences on the Mac Pro and then turning it back on to no effect. I have also logged out of iCloud Drive on all of my devices (which include two iOS devices) and then logging back in to ensure that I'm using the same login id on all devices, again with no apparent change.
Any suggestions for my next steps in attempting to solve this issue? Is there any way to get more information about precisely what type of error is occurring? Hovering over the badge only shows "Error".
Thanks in advance.
Jon

Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon

Problems with Bootcamp and windows 7 graphic driver

So I installed windows 7 ultimate on my 24" Imac 2.93GHZ with a Nvida GT 120.
I installed the boot camp software on windows, which installed the graphics driver and everything.
Anyway so I downloaded Dungeons and Dragons online cause I wanted to see how the performance is.
When I run it, it says no sutible graphics drivers were found, check to see if your system meets the requirements.
Which it does, the game is quite old and could run on a old Geforce 6600.
So I went to Nvidia to look for the driver, I thought I found the right one, downloaded it, but it didn't work saying that I didn't have the card. Am I supossed to download the mobile version of this driver?
Thanks!

Fixed it, just needed to upgrade my bootcamp.

Problems with RAID and a Flash USB Drive

I'm attempting to install on a RAID 1 array using just one usb flash drive. Yes, just one. I'm trying out the idea's in this thread: http://bbs.archlinux.org/viewtopic.php?id=64281
Partitioning scheme:
sdb1 -> boot partition
sdb2 -> swap
sdb3 -> raid 1 array -> root
I set the partitiions to type 0xfd (linux raid autodetect) in fdisk (probably not necessary) and created the array with:
mdadm -C /dev/md0 -n 2 -l -b internal missing -W --write-behind /dev/sdb3
I then installed like normal, specifying that I needed usb and raid hooks in mkinitcpio.conf
I added "md=0,/dev/sdb3" as a kernel option in grub's menu.lst, specifying that the md driver should assemble /dev/md0 (my root partition) out of /dev/sdb3 before trying to mount it.
This process was succesful using a partition on my hard drive.
However, using a usb drive causes a kernel panic during boot when trying to mount /dev/md0.
Looking at the messages reveals that before my usb drive was detected, md attempted to create the array, unsuccessfully, as /dev/sdb didn't exist yet. "md: unkown device name /dev/sdb3" or something to that effect.
In mkinitcpio.conf, the usb hook comes before the raid hook, so this shouldn't be happening, should it?

I think rootdelay will not work in that special case, rootdelay makes the system to wait after all the hooks are executed, and you need to wait before executing the raid hook.
I don't know if there is an easy way for that, but one solution is to modify the raid hook to wait for /dev/sdb3 to be created :
- edit /lib/initcpio/hooks/raid, add this before the /bin/mdassemble command :
until [ -e /dev/sdb3 ] ;
do
sleep 1 ;
done
- rebuild your boot images with mkinitcpio (you'll need to chroot to your system)
that should work
PS: someone correct me if I'm wrong, but from what I know, the usb hook does not create your /dev/sdb (if you edit the usb hook, you'll see that it only set rootdelay if it is not yet set). it is the udev daemon, which is launched in the background by the udev hook, and the udev daemon is quite long to create USB device nodes.

Problems with files and a new hard drive...

Hi there...
I have maxed out an external hard drive I was using to hold all my photos....
I have bought a 2 new drives with a view to backing up everything I have on file.
If I start moving files around LR then can not locate the files and they come up in red in the folders section of the programme.
IS there a way of reorganizing things without having to re import stuff?
Any help would be great....
Lee

I think I get it... (im having a dumb day!!)
I set the new h/d up and I import in essence an empty file into LR.
Then all the files I want to keep on the new h/d I drag and drop from the old h/d...is this right??
like I said Im having a dumb day...
all the help is much appreciated
Lee

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

A problem with BToes and it´s x64 driver

Similar Messages

Maybe you are looking for