A problem with channel strip outputs in Logic Pro 8

I have a Power Mac G5 2.3GHz dual core processor with 2GB memory, running LogicPro 8 connected to a MOTU 2408 Mk3. I originally assigned the outputs on the individual channel strips on my Logic default work page to the individual outputs on the MOTU, (1, 2, 3, 4, etc.,) as this is the optimum configuration for the amount of channels required for the recording I do. Checking theses settings recently though, I find the menu only gives the option to set outputs to 1-2, 3-4, 5-6 & 7-8? What has happened and how can I change them back?
Thanks

Sounds like your channel strips are stereo and not mono.
Click on the little linked circle button (format button) in the bottom of the channel strip to set it's mode to MONO (single circle).
If you have effect plugins inserted on the channel strip make sure they are mono and not stereo. (Click and hold on the effect on the insert slot and choose the mono instance of the plugin from the plugin menu).
Hope that helps
R

Similar Messages

Problems with ppc 10.4.11 & Logic Pro

Hey guys, hope someone here can help...
A few days ago I decided to clean re-install OS X 10.4 on my Mac Mini. Previous to this re-install Logic Pro was on the system and working fine so I re-installed the system and installed LP and now the app won't launch, it shows up in the dock a few seconds then disappears...
I read somewhere that I needed to update the system with the latest pro app support (or the latest one according to that version of Logic) so after hours of searching for the pro app support I finally got it installed but the app still won't launch.
Logic Express is also on the system so would this be causing a conflict? I'm not sure what's going on as it's exactly the same version of Logic that was on there before.
Any help would be appreciated as I was looking to use the Mini and Logic Pro on an upcoming recording project as it's a lot easier to move around than the G5!

OK, what you can do now is open up the Console application (in Applications/Utilities ), and find a Logic crash report. Copy the content (on the right) and post that here. There may be clues. No guarantees though...
!http://farm6.static.flickr.com/5054/54666620426206a03783z.jpg!

Problem with Optical Audio Output

Hi, all. I'm running my audio out through the optical digital output on my Mac Pro. Recently, I've developed a problem with iTunes, where certain tracks are distorted and others play extremely softly. There is no problem when I run the audio out through the headphone jack...it's only a problem through the optical output.
Furthermore, when I go to Audio MIDI setup, it says "Output is not supported" for the optical digital output, when I've read that I should be able to make adjustments to it here.
Does anyone know what might be causing a problem with my optical output? Thanks so much!

Look in iTunes' "Playback" preferences. Try turning off "Crossfade", "Sound Enhancer", and "Sound Check"/

TS1702 Ipad problems with channel 4 on demand app

Hey dudes,
Can anyone help. I've got new iPad 3rd generation. Having problems with channel 4 on demand application. When I want to watch catch-up program's
The adverts will play but the programmes will not they just freeze.
I have ready tried the following:
Deleted the app and re-installed. But having the same problems. My iplayer and itv player works perfectly with no problems.
can anyone please help?
S

You said you tested another VOD... Did the other have the same issue, or not?
Unplug power from the Set-top box and router for a few minutes..... PLug them back in and try again... if still not, then remove power from the STB and reset the router with a paperclip or pen in the reset hole on the back of the router for 15 seconds... turn them on and try again
If that does not resolve the issue, contact tech support and have them try to reset the STB and possibly reboot the ONT, and then go from there
Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

How to record stereo output in Logic Pro X

I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
Any help will be highly appreciated.

Send everything to Bus X - Bus X to StereoMstr (for monitoring)
Create new Track/Channel
- for Input choose Bus X
- for Output choose No Output
Engage Record on the newly created track and off you go.
Have a nice day!

Can I control the system output via Logic Pro?

I know how to record system output in Logic Pro (CH 13&14), but in order to do that, the tracks in Logic Pro must be muted to avoid feedback.
What I'm wondering is if I can control overall system output via a track/tracks in Logic Pro. I've got a Plextor PVR set up so that I can watch tv on my Mac, but when I connect my digital cable box to it the volume is down at around a faint -24 dB. I'd like to be able to boost the gain with Logic.
Thanks in advance for any help!

Never mind. I found a cool app called Audio Hijack Pro that works perfectly for this.

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Update the software. There is no reason to run a two year old version.
Russ

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

I have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem

i have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem

I am having the exact same problem with the iMessage on both my MacBook pro and my iphone4. It either says the username/password is incorrect or it can not contact the server. Facetime and iCloud works just fine with the same apple id and password. Somebody please help, I am beyond frustrated!

Why can't I save inputs, outputs, or colors with Channel Strip settings? :(

I am really just starting to embrace the library for Channel Strip settings - I love that it saves the plug-ins and cusotm Icons, but I kind of thought it would make sense for everything to be saved, no?
I would like to choose a Channel Strip and have it show up with the I/O routing and a saved color. Is this possible and I am just missing it?

You may be hitting a bug. On my system, when I double-click a bin, the new instance of the Project panel inherits the column layout from the current instance. A screen capture video may help get a better handle on what you're seeing.
like a feature request to be able to save Project Panel column order independent of the saved workspace.
If I'm just misunderstanding and PPro is behaving as expected, then you have two options:
Have each user save a workspace with their own particular panel layout and a common column order. Then, after taking hand-off of the project, select the preferred workspace.
when the project is handed off, have the recipient enable the "Import Workspace from Projects" option in order to get the column layout (Window>Workspaces), then move the panels around as desired.

Cracks and Noises with Channel-Strips in L 7.2 and MacBook Pro 17"

I am using a MBP 17" and have "performance-problems": when I choose a single Channel-Strip (like "11 Ethnic/Breathy Harp"), the performance-control shows only one CPU working near 90% (the right one) and I'm hearing cracks and noises. I've tried without Fireface (intern) - same problem. I can't believe, that this "incredible machine" isn't able to run one single Channel-Strip at a time without problems!!!
Anyone ideas?

Hi Marty, thanks for your imidiate reply! Though your information about sculpture is very helpful I unfortunately have the same problem with CST like "01 Pianos/Concert Hall Grand Piano" wich is from the exs24 instrument. A further problem is, that the performance control in logic show just one cpu working while the other indicator does nothing. I compared to the performance control of MacOS: there the indicator show both CPUs are working - strange, isn't it?
Regards
Franxon

I can't access my newest channel strip settings in Logic 8

Hello all. I am running Logic 8.0.2. I have several channel strip settings saved from my move from Logic 7 to 8. I noticed that when I save new channel strip settings now, that they show up in the proper folders on my Mac, but do not show up in my lists in the media bin on the right, or when you click on the "setting" button all the way on the left for the fader you are loading an instrument on. I did click "reset channel strip" which just resets the strip, and tried refresing the library under the media panel on the right. I have looked at some other forums as well, and I'm not sure if this particular issue has been answered but I haven't seen it yet (apologies if I'm repeating from a past post). Please let me know if there is something I can do...it seems like it should be something simple, like just a "refresh" somewhere, but they still don't show up. Thanks to all for your help!

i have the same problem with my iphone 4.and when synching with itunes it says "can't synch contacts with iphone because iphone is using contacts. close contacts on iphone and synch again."

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

A problem with channel strip outputs in Logic Pro 8

Similar Messages

Maybe you are looking for