A problem with file loading
Hello,
I need to load a binary file and display it. If I wire output from Read binary file to shift register it will be displayed only after I add next element to an array. How to display an array asap and to be able to add next elements to it?
Thank you
Solved!
Go to Solution.
Attachments:
test2.vi 36 KB
notazomby wrote:
A requirement is that user can abort aplication only if he closes window.
Then handle the VI->Panel Close event and stop the loop when you get that event. That way you can properly shut down your VI instead of aborting.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
Problems with File Transfers Over Firewire 800
Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.
-
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files. -
I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
-
Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Problem with File Based replication in Weblogic Express 10
Hi,
We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
We are using File based session persistance in weblogic.xml
We have a shared location for all the three servers where we will be sharing the Session data.
When we start the application, its works fine and is very fast, but after sometime the application slows down.
Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
We cannot used Inmemory replication as our Appl doesnt support it.
Please advice as it is a major show stopper in our Production Mirror env.
Weblogic ConsultantIt is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
More details are here..
http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
Jayesh
Yagna Sys -
Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
java.security.AccessController.checkPermission(AccessController.java:427)
java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
java.lang.SecurityManager.checkRead(SecurityManager.java:871)
java.io.File.exists(File.java:700)
SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
int totalCount = 0;
List list;
String song = request.getParameter("song");
PrintWriter out = response.getWriter();
File file = new File("./data/result");
if(file.exists()) // this is line 31, which seems to cause the exception
list = readFile(file);
else
file.createNewFile();
list = new ArrayList();
list.add(song);
writeFile(file, list);
for(int i = 0 ; i < list.size() ; i++)
out.println(list.get(i));
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
doPost(request, response);
private List readFile(File file)
List list = null;
try
FileInputStream fis = new FileInputStream(file);
ObjectInputStream ois = new ObjectInputStream(fis);
list = (ArrayList)ois.readObject();
ois.close();
catch(Exception e)
e.printStackTrace();
return list;
private void writeFile(File file, List list)
try
FileOutputStream fos = new FileOutputStream(file);
ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(list);
oos.flush();
oos.close();
catch(Exception e)
e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-mattiHello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
String s = "";
PrintWriter out = response.getWriter();
String docroot = getServletContext().getRealPath( "/" );
out.println("docroot: "+docroot);
File file = new File(docroot+"test.txt");
if(file.exists())
s = readFile(file);
out.println(s);
else
out.println("file not found");
//file.createNewFile(); // causes exception
//out.println("new file created.");
writeFile(file, "written by servlet");
out.println("Now look in the file "+file.getPath());
out.println("and see if it contains text 'written by servlet'");
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
doPost(request, response);
private String readFile(File file)
FileInputStream fis = null;
BufferedInputStream bis = null;
DataInputStream dis = null;
String s = "";
try
fis = new FileInputStream(file);
bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
s = dis.readLine();
fis.close();
bis.close();
dis.close();
catch(Exception e)
e.printStackTrace();
return s;
private void writeFile(File file, String s)
FileOutputStream fos = null;
BufferedOutputStream bos = null;
DataOutputStream dos = null;
try
fos = new FileOutputStream(file);
bos = new BufferedOutputStream(fos);
dos = new DataOutputStream(bos);
dos.writeChars(s);
fos.flush();
bos.flush();
dos.flush();
fos.close();
bos.close();
dos.close();
catch(Exception e)
e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti -
Problem with File Content Conversion
Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PMYou will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ -
One of the desktops on my macbook 2007 steel case will not open.
The message i get on screen at login is that there is a problem with file vault.
my dissertation is on that desktop.
all other desktops/user accounts are unaffected and i have admin permissions on them
i recently upgraded to osx 10.9.4
how can i get back in?
chaiman 22If you restored the account to which the FileVault protected Home folder belonged, then you need to log into that account and enable FileVault.
If you just need access to the data in the FV protected Home folder, then locate the sparsebundle disc image file that contains the encrypted folder. Double-click on it as if to mount it. You will then need to enter the FV password associated with the account to gain access (this is NOT the admin nor login password.) -
Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandraHi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth -
Problem with file content conversion in receiver file adapter
Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
ChandraPosted in Incorrect forum.
Posted again in Process Integration forum -
Problem with file descriptors not released by JMF
Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects. -
Problem with File Uploading.
Hi,
I have one problem with File Upload component.
JSP
<ui:upload binding="#{NewProblem.fileUpload1}" columns="#{SessionBean1.uploadedFile}" id="fileUpload1" labelLevel="3"
style="left: 24px; top: 24px; position: absolute" validator="#{NewProblem.fileUpload1_validate}"/>
Java
UploadedFile uploadedFile = getSessionBean1().getUploadedFile();
Variable uploadedFile is NULL :(((((((((((
web.xml
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<filter>
<filter-name>UploadFilter</filter-name>
<filter-class>com.sun.web.ui.util.UploadFilter</filter-class>
<init-param>
<param-name>maxSize</param-name>
<param-value>10000000</param-value>
</init-param>
<init-param>
<param-name>sizeThreshold</param-name>
<param-value>10024</param-value>
</init-param>
</filter>
Thanks.check out the fileUpload article
Using the File Upload Component
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/file_upload.html -
Problem with file access in other computer in jsp
I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 serverno error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287) -
Problem with file path in linux
hi,
i have problem with file path accessing in linux. my java class is accessing a abc.cvs file and and getting all data. it is working fine in windows xp. but i run this same file in linux it does not access the abc.cvs file and does not get any data.
my project structure
Search
abc.cvs
search.SearchMain
i am sccessing this cvs file in this SearchMain class by this way file name = "abc.cvs"
It is working fine with window but problem with linux.
when i place this abc.cvs in a folder as "./data/abc.cvs" also working fine with windows but not in linux.
I am new for linux.
Please give me solution.
Thanks in advance
Raviforgot to tell,
then you need to export that path
export $CLASSPATH
code}
Maybe you are looking for
-
Error "number out of range" in pdf sent through mail using smartform output
Hi Experts, We have a program which sends mail using smartform output in 'PDF' format. We are able to preview smartform correctely in SAP and mail is also getting sent fine with attachment of form as PDF document. But, when we try to open the documen
-
T420 4178 XP32 downgrade HHD slowness issue
Hi everyone , i just recieved my brand new T420 and i need a few advices please. I have downgraded my 420 4178 to win xp 32 and my 500 gb 7200 rpm sata drive is slow. [hitachi hts72755] When i copy a 300mo folder from my desktop to my desktop it tak
-
WVC200 in low light/software question
I've got a WVC200 cameras in my home we use to monitor our baby. I had paired it with another cheap camera I had with night vision and the second camera was used for illumination only. However it's failed, and I can't seem to find out what Illumina
-
How to make a Struts message null after used in JSP?
Hi, In the context of Struts/JSP, An action class might write error messages by ActionError msg = new ActionError("msg.request.something"); ActionErrors msgs = new ActionErrors(); msgs.add(ActionErrors.GLOBAL_ERROR,msg); saveErrors(request,msgs); Thi
-
I have an apple powerbook g4 running 10.3.9 which my daughter gave me. However all the installation discs were lost. I just purchaed OS x Panther for it. I want to wipe the hard drive clean to get rid of all of her personal information as I want to d