A problem with RDP when WAEs was connected to the network
The customer has a problem with RDP sessions on one Microsoft cluster server. The problem started when the WAEs (management and acceleration WAEs) are connected to a network (where a cluster is connected). Did anybody have the similar problem? The sessions are connected, but after some different times these sessions are frozen. This problem is only with this Microsoft cluster, the RDP on other servers are good. The WAAS is 4.0.17b14.
Hi,
I have the same problem as I write. RDP seems to get slower when I connect the WAEs and the login timesout before the user can type the username and password.
I have ensured that "EPM Classification" is disbled.
Check and see if Term-services are well configured on the TS server side. Maybe some config is conflicting with WAAS TS optimization.
What happens when you set TS to passthrough?
Also try this for your case;
" HOW-TO: Configuring RDP and Terminal Services for Full WAAS Optimization
Microsoft RDP and Terminal Services are, by default, compressed and encrypted. As such, the default Cisco WAAS policy for these applications is to apply TCP optimizations only. RDP and Terminal Services can be configured to allow Cisco WAAS to provide full optimization (DRE, LZ, TFO) which is a 2X-10X improvement over native WAN and 2X-3X improvement over the compression provided by Microsoft.
Configuring Microsoft RDP and Terminal Services to support Cisco WAAS full optimization requires a change to the client and a change to the server.
On the client, disable compression by editing the .RDP file for the connection using Notepad or a similar text editor. Identify a line in the file that shows "compression:i:1". Modify this line to say "compression:i:0". This disables compression for the RDP/TS connection.
On the server, open the Terminal Services Configuration found under Start > Programs > Administrative Tools. From here, expand Terminal Services Configuration to Connections. Double-click the "RDP-Tcp" entry found in the workspace. Change the encryption level to "Low", which specifies that only login will be encrypted. Then, click "Ok" and close Terminal Services Configuration.
Then, modify the Cisco WAAS policy on the configured device group (or explicitly on each of the WAEs) called "MS-Terminal-Services". Set this policy to "Optimize Full". "
Anyone out there with a clue why RDP gets disconnected?
Similar Messages
-
Strange problem with SQLPLUS when client and server on the same box
Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AMuser11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication. -
i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you
hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists
-
'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?
You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download: -
Problem with Safari **Safari can't connect to the server**
My internet is working fine, but I keep having to refresh the page because I'm always getting "safari can't connect to the server". Same thing happens with different browsers. I've read a couple things online and unistalled everything that I think is causing the problem but it's still happening frequently. Any help would be greatly appreciated!
Most school networks are closed networks. You can access their Intranet, with all the files and peripherals and everything, but you need to have a specific password or IP address to access any outside connection. I have an ibook G4 that's 3 years old. I used it in high-school to access AOL wirelessly. That was before closed and protected networks were prefered. It shouldn't matter if the school intranet is widows based or not. You need to access your own internet service sometimes in order to get any reaction. If you simply use safari, you might only be connecting to the schools intranet, which only links together the schools computers and keeps the system isolated. Also, you need to check your firewall settings, in fact, just turn off the firewall. The schools sytem is firewalled up the bum and you shouldn't get attacks anyway because you're running the mac os.
You might also try an alternative approach. Go into a computer lab, access one of the systems, then go to control panels and look up every connection you can find. Take down all of the info and then see which matches up with similar info on your mac. Then go to another pc and look up the same info again. Is it different? How? Then take that listing to the system administrator and show them. They may not know that a mac has a simpler interface than the pc, so you may have to do some prodding to get them to take a look. If they still tell you it wont work, you could try boot-camp or a virtualizer (to let you run windows alongside the mac os). If you use a virtualizer, you can get your own copy of windows and then share it's connection to the main system to the mac. -
ADSL Disconnects when my mac connects to the network or when ever it wants
Hi there.
My MacBook Pro Loves to pull fits on the Network.
What it dose is when i open the lid on my laptop it disconnects the internet. So the ADSL Light Turns off on the router.
Whats wrong with it?Other people on the network have no issues with bit torrent
Yes but they may be using all the routers resources.
If you have multiple devices on the network the router may just be crashing. I have seen this before with thompson routers. I have seen Thompson 780wl crash with more than 3 devices connected to it. When used with 1 device it was fine.
Dlink in my experience are buggy at the best of times. I would suggest you flash your router with the latest firmware you can download from dlink.
I would suggest as william indicated replacing your router with a more efficient one. -
Hi,
I have been hunting down a NullPointerException for half a day to come to
the following conclusion.
My constructor calls a method which uses static variables. Since an intance
of my class is created in the static block when the class is loaded, those
statics are probably not fully initialized yet and the constructor called
from the static block has those null pointer problems.
I've considered moving the initialization of the static variables from the
declaration to the static block. But your code is inserted BEFORE any other
code. Therefore not solving my problem.
Two questions:
1) what would be a solution to my problem? How can I make sure my static
variables are initialized before the enhancer generated code in the static
block calls my constructor? Short of decompiling, changing the code and
recompiling.
2) Why is the enhancing code inserted at the beginning of the static block
and not at the end? The enhancements would be more transparent that way if
the static variables are initialized in the static block.
Thanks,
EricHi Eric,
JDO calls the no-args constructor. Your application should regard this constructor as belonging
primarily to JDO. For example, you would not want to initialize persistent fields to nondefault
values since that effort is wasted by JDO's later initilization to persistent values. Typically all
you want to initialize in the no-args constructor are the transactional and unmanaged fields. This
rule means that you need initialization after construction if your application uses the no-args
constructor and wants persistent fields initialized. On the other hand, if your application really
uses constructors with arguments, and you're initializing persistent fields in the no-args
constructor either unintentionally through field initializers or intentionally as a matter of
consistency, you will find treating the no-args constructor differently helpful.
On the other hand, if Kodo puts its static initializer code first as you report, then it is a bug.
Spec Section 20.16: "The generated static initialization code is placed after any user-defined
static initialization code."
David Ezzio
Eric Borremans wrote:
>
Hi,
I have been hunting down a NullPointerException for half a day to come to
the following conclusion.
My constructor calls a method which uses static variables. Since an intance
of my class is created in the static block when the class is loaded, those
statics are probably not fully initialized yet and the constructor called
from the static block has those null pointer problems.
I've considered moving the initialization of the static variables from the
declaration to the static block. But your code is inserted BEFORE any other
code. Therefore not solving my problem.
Two questions:
1) what would be a solution to my problem? How can I make sure my static
variables are initialized before the enhancer generated code in the static
block calls my constructor? Short of decompiling, changing the code and
recompiling.
2) Why is the enhancing code inserted at the beginning of the static block
and not at the end? The enhancements would be more transparent that way if
the static variables are initialized in the static block.
Thanks,
Eric -
how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !
Use cmnd+w to close the tab.
-
Problem with 0FIGL_VC1 when use constant selection in the query
Please kindly help me. I have this problem for 2 weeks already.
When I create a query from virtual cube 0FIGL_VC1 (balance sheets / p&l statements), if I use constant selection in any of key figure, my report could not display financial statment correctly.
My report layout
Columns : key figures (including 0FIGL_VC1_CK001)
Rows: 0GLACCEXT (financial statement item) << as hierarchy
Initially, the query is processed correctly.
However, based on the requirement from my customer, I really have to use "constant selection" for some of my columns. Whenever I do so, the query display incorrectly. (Some nodes of financial statement item just disappear. (it seem like all contra item will disappear.)
Please help!If I dont use constant selection in the query, data are display correctly.
But If I use constant selection in the query, some financial statement item dont display any value
Example :
Financial statement item(Display in hier) Period1 Total Period1(Constant selection)
A 10 60
B 20 60
C 30 60
D 0 60
- Financial statement item "D" has some value.
- Financial statement item "D" is in the hierarchy,one gl account has been assigned to more than one group differentiated by debit/credit indicator.
Please help!! -
Hi,had a problem with my iphone4, phone was reset at the Apple store BUT now it is not being recognised by my computer. Itunes is up to date & i have tried my usb with my ipod & everything is ok.Any idea what to do next please??
iOS: Device not recognized in iTunes for Windows
-
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?
Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
The error
Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.
Maybe you are looking for
-
Updated to iTunes 10.5 on Vista. Many problems now.
I updated to Itunes 10.5 on Vista. Now my PC or Itunes won't recognize my Ipod or Iphone. When I plug those devices in, the comp doesn't even recognize them. They don't charge or anything. Help! What is going on? I've tried removing and reinstalling.
-
How to replace a clip that is part of a multicam clip in FCPX 10.0.9
I am having an issue with a project drifting out of sync in FCPX 10.0.9. In the time line everything is in sync, however when I export a master .mov file the video drifts out of sync. I believe this is because my main audio is an mp3 file. MY plan
-
I errase safari icon, now can't acces internet at all, please help
I errase safari icon, now can't acces internet at all, please help
-
Issue Regarding SAP HR Implimentation
Hi, Can anybody provide me the list of SAP HR implemented compnies of Delhi/NCR in Last 2 years. Thanks & Regards, Geeta Chaudhary. Have you Got the answer for this question in your earlier thread
-
Windows hijacks iPod and treats like flash drive.
every time I connect my new ipod to my computer (vista) windows explorer opens up and shows an empty drive, so I close that and then iTunes opens and try's to sync, after 40 songs windows hijacks it, disconnects it, re-connects it and opens it again