A Problem with Rolling forecast

Hi Experts,
Currently i have a problem in the Query Designer. Any help or suggestion will be very much appreciated.
The system that we have is BI 7.
What we want to have is a rolling forecast for the Profit and Loss Account.
It means that we will lock the previous periods against changes and open the coming periods for planning. In the query all 12 months have to be displayed.
For that purpose, I created 1 structure with 2 selections.
The 2 selections are
1. Closed Periods, which restricted to 0fiscper 001.2007-003.2007
2. Open periods, which restricted to 0fiscper 004.2007-012.2007.
Then I drill it down with 0fiscper so that I can see 12 months.
The problem is now that when I do not surpress the zeros, then I will see 2 times 12 months instead of only 12 months.
But on the other hand, I cannot surpress zero since I also want to see and be able to do planning on the zero values accounts (for example on the open periods).
Does anyone know how to solve this problem, so that I only see 12 months in my query, but also be able to see zero values on the open periods?
Otherwise, does anyone have any other solution to solve the rolling forecast? (any links or documentation?)
Thank you very much in advance.
Best regards,
Fen

Hi Venkat,
In the new BI Integrated, we can close and open the periods by put the indicator for close and open periods on the query designer.
The report that I am aiming for will look like this:
Closed Periods                               Open Periods
January         February      March     April       May      June    July ...... December
For that I created 1 Structure with 2 Selections.
The selections is restricted as follows:
Closed Periods --> 0fiscper 001.2007-003.2007
Open Periods ---> 0fiscper 004.2007-012.2007
and then I drill it down with 0fiscper.
But instead of giving me the periods that I restricted it gave me the following:
Closed Periods                    Open Periods
January   February March    January    February    March
Best regards,
Fen

Similar Messages

Problem with rolling frames on VCR to iMovie capture

I have a video tape copy of what was originally 16mm film, when I import from the VCR comp out via my mac firewire, the original film frames are visible 'rolling' up the screen, they are not visible on the original video, in simple terms I assume my imovie capture rate is at odds with the original film speed, but I don't know how to correct it - any suggestions ?
Thanks
Ron

Hi
If VHS is in PAL. And A/D converter is set to PAL (25fps) and iMovie is set to 25fps. There should not be any rolling of frames.
Do You see the VHS-VCR on a TV during Capture ?
What A/D-box or Camera do You use and this is set SP-mode/PAL 16-bit audio etc ?
And iMovie set right too ?
I use a Canopus ADVC-300 (now Grass Walley ADVC-300) to convert and this has a TimeBase correction so I get e very good result. No rolling frames.
Yours Bengt W

Problem with Photos in Camera Roll after 4.0.1

Hello,
I have a 16GB iPhone 3G.
I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
If I scrolled up to older pictures, the older ones were fine.
I took a new picture to test it, and that one looks fine.
So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
Is there anything I can do to fix this?
(Just for the record, my phone is not and has never been jailbroken.)

There is a solution!!
After installing iOS4.0.1 update on my 3G, I too had the black
blob in my camera roll. As posted in an earlier thread, here's
one way to resolve this problem. It worked for me!
Just email the photos that don't appear in the camera roll to myself,
delete the offending photos and then re-save them from the email.
A bit of a pain but it's a way around it. Good luck!
ErikV

A problem with file-roller!!!

I have a problem with file-roller.
When I open an achieve file with file-roller, I can not directly open the file in the file-roller. "Open with" does not work either.
But if i use sudo for file-roller, "open" and "open with" do work.
How can I use "open" and "open with" without sudo for file-roller?
Can any body help me ?

Hi,
The link is working... it's not a nautilus quirk. Try these examples:
FIRST EXAMPLE:
Login as root and edit mimeinfo.cache (In openSUSE, the linux distribution I'm using right now, this file is placed on /usr/share/applications).
su
gedit /usr/share/applications/mimeinfo.cache
Search for audio/mpeg=
The first application I specify is going to be the program that File-Roller will use to open a compressed mp3 file.
Example:
audio/mpeg=totem.desktop;banshee-1.desktop;
This will open Totem...
audio/mpeg=banshee-1.desktop;totem.desktop;
This will open Banshee.
SECOND EXAMPLE:
$ su
$ gedit /usr/share/applications/defaults.list
Search for:
text/xml=MozillaFirefox.desktop
Replace to:
text/xml=gedit.desktop
This will open xml files with Gedit, instead of Firefox.
Good luck.
Last edited by kuric (2008-11-22 16:49:30)

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Rolling Forecast in BPS

Hi,
I have problem with creating the rolling forecast with Actual data.
For example I have the forecast data being dynamic with a variable attached [006.2007 to 012.2007] and have actual data with a variable [001.2007 to 005.2007]. I have the forecast variable in the Planning Level and have selected dynamic in the layout - which works, but for actuals I'm not getting it to be dynamic without using the offsets and creating each one separately. What I want is having both being dynamic so that the Admin person only needs to change the variables then the layout. Any ideas would be appreciated.

Thanks alot, that was it!!!, I didn't think you could have set the variable when SAP turned the field grey, guess they have changed it for BPS.
I will award you the full points, I only have one final issue with the rolling forecast, is that the titles in column's all have the starting value from the variable and not the dynamic value.
Actual : 001.2006 to 004.2006 only show's 001.2006 for all four columns
Forecast : 005.2006 to 12.2006 only show's 005.2006 for the remainder.
The actual data is correct for the periods it's just the text headings which are incorrect.
I have set the following in the layout,Dynamic for 0FISCPER and text replacement Key.
On the variable I have Text Replacement as Characteristic value... but it still doesn't default to the values I was expecting.
Thanks once again for solving this for me.

IDES installation problem with DDIC password

Hello everybody,
After hours of searching and trying..
I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Thanks in advance
Lenvy
Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
Edited by: Lenvy Gee on Sep 6, 2009 2:34 AM

Good Morning everybody,
I started a next try, the mmc is running on green, the login starts up and......failed.
So the network setting seems to be correct.
The log files included following:
..........................................(just the last lines).............................
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server BASIS_A23_00 on host BASED (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Mon Nov 26 08:06:26 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10688
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0x8
M ThCallDbBreak: use db_sqlbreak
C CANCEL rejected, because there is no SQL statement active
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
M ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
M ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: ThrCoreInfo o.k.
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       YES YES NO 000 255 255 20401126 080533 BASIS
C Disconnecting from connection 0 ...
C Now I'm disconnected from SAP DB
B Disconnected from connection 0
B statistics db_con_commit (com_total=4, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c   327]
M return from clean-up function ...
and:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        A23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    144
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2928
Mon Nov 26 08:03:01 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c   1243]
     shared lib "dw_xml.dll" version 144 successfully loaded
     shared lib "dw_xtc.dll" version 144 successfully loaded
     shared lib "dw_stl.dll" version 144 successfully loaded
     shared lib "dw_gui.dll" version 144 successfully loaded
     shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 08:03:10 2040
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >BASIS_I23_00                            <
DpShMCreate: sizeof(wp_adm)          25168     (1480)
DpShMCreate: sizeof(tm_adm)          5652128     (28120)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D800050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000D800050
DpShMCreate: allocated wp_adm at 000000000D802150
DpShMCreate: allocated tm_adm_list at 000000000D8083A0
DpShMCreate: allocated tm_adm at 000000000D808400
DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
DpShMCreate: allocated appc_ca_adm at 000000000DD72060
DpShMCreate: allocated comm_adm at 000000000DD73FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
DpShMCreate: allocated gw_adm at 000000000DDFACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DDFACE0
DpShMCreate: allocated wall_adm at 000000000DDFACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c   11822]
DpStartStopMsg: send start message (myname is >BASIS_I23_00                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Nov 26 08:03:11 2040
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Nov 26 08:03:17 2040
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Nov 26 08:04:26 2040
SoftCancel request for T17 U18 M0 received from IC_MAN
SoftCancel request for T19 U20 M0 received from IC_MAN
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c   2496]
Mon Nov 26 08:04:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:31 2040
ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3092) automatically
ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c   14532]
DpHdlDeadWp: restart wp (pid=3268) automatically
ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c   14532]
Mon Nov 26 08:04:45 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
Mon Nov 26 08:05:10 2040
ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c   14532]
ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c   14532]
Mon Nov 26 08:05:33 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
The kernel is not patched. I just (try) to install the kernel files from the sap market place
IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
How do I upgrade the kernel by having no .exe - file? May the installation go on after patching the kernel?
Thanks you really much
Lenvy

Ever since upgrading to iOS5, I've had problems with my photo albums. Anybody else having problems?

I have a Verizon iPhone 4 and updated to iOS 5 on the release date. Ever since, I've had all kinds of problems with photos. In my albums, whether it be Camera Roll or Photo Stream (which I have since disabled), either the thumbnails are repeated when they shouldn't be, or they appear as a gray box. If I do happen to see a photo, it's blurry. In either case, if I choose "Edit" the correct picture appears and is clear. If I save or cancel, it either goes back to the wrong photo or the gray box. I do not sync my photos. I've searched all over the net and can't seem to find anything about this being a known issue. Has anybody else had this happen and if so, what did you do to fix it?

Reset all settings !
Settings > General > Reset > Reset all settings.
That helped me with the same issue.
Good luck !!

Yoga Tablet 10" - update to Android 4.4 and further problems with Google Music

Hi everyone.
I've just upadated my Yoga Tablet 10" to Android 4.4. Whole process went smoothly but afterwards I'm experiencing some problems with Google Music. Playback is "skippy" or "choppy", even if whole song is downloaded. Every 15-25 seconds there small pause, which is quite annoying.
Local music files (uploaded through usb) seem to work just fine.
I've even tried resetting whole device to factory settings but without any success.
I also have an impression that youtube playback is not so smooth as it used to be in Android 4.2...
Has anyone experienced something similar? Any hints or sollutions?
Lenovo Yoga 10 (B8000-F), Android 4.4.2

acepuresd wrote:
Hi,
I tried updating my B8000-F to android 4.4.2 and it won't take.
Any help, anyone?
Thanks,
Ace
http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
"For those wondering where the KK OTAs went, I had them pulled while we work through issues."

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Problem with applications that doesn't show even if installed and to uninstall some that work wrong

Hi there!
Problem #1: I've been having problems with my Windguru application in my Iphone. From sometime onwards, it is not showing the forecasted wind, etc after I open it. Tried to uninstall and install again but the problem continues. Seems like there is something sticking in my iphone that is preventing the app to work correctly after uninstalled. Is there something "Windows like" to clean all remains of an application?
Problem #2 and somehow related: I installed Netflix app in my Iphone as a trial and went ok. Then, logically, tried in my Ipad but something went wrong. The App is installed but doesn't show anyplace. In App store it shows as installed, in General Settings it shows in the list of applications, but no Icon!
Then I tried to uninstall from Itunes and the same thing continued happening. Worse, then I tried to install from Itunes, SAW the icon with the progress bar being installed in the Ipad and suddenly it dissapeared!!
Anyone can help?
Thanks in advance.

Driskol wrote:but i dont have access to the old kernel
I can't solve your problem, but I can help you work around it by downgrading if nobody else can figure it out.
You can find old packages here at the Arch Rollback Machine project repo someone thankfully keeps running,
http://arm.nrk.cc/
Just go to 'core' and get the package(s) you need and downgrade. There is also a thread on here somewhere about setting up pacman.conf to point to a specific date with ARM if you don't want to get individual stuff manually, but just doing it individually would probably be easier, as I don't expect the kernel has too many other things you need
Last edited by FrozenFox (2009-04-17 10:51:42)

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

A Problem with Rolling forecast

Similar Messages

Maybe you are looking for