A problem with WAAS mobile client

The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.

I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman

Similar Messages

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

Problem with Vikings Mobile number (Poland)

[Topic title updated by moderator to be more descriptive. Original topic title was: "Problem with Vikings Mobile number"]
Hello, I can't login Skype Qik for Windows Phone with Vikings Mobile country: Poland. Still getting msg wrong Phone number when try to login. On android i can login without any problems.

Hi, can you specify the first 5 digits of the phone number? For example +48 xxx
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

I'm having problems with my mobile internet connection

I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Sign in issue with Lync Mobile client

Hi guys,
I'm trying to deploy a reverse proxy for mobile and external users, but I am having issues with the mobile client for android. It keeps saying "an unknown error occurred". Please try again.
I've got the log zip file outputted by the client here if someone could have a look and point me in the right direction? I've set
up server farms for the webservices, meet, and dialin.
Desktop clients can log in without any issue btw.
Cheers,
Gareth L. Armstrong

Verify from DNS Configuration and Check what is causing this issue from
Lync Connectivity analyzer
Also to troubleshooting Lync mobility, you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Problems with Vodafone Mobile Card (Huawei E220)

I have a Vodafone Mobile Card with the latest firmaware and with the latest software on the Mac (the official software from Vodafone, kinda like launch2net) and all worked fine in Tiger, but now in Leopard, I did a clean install, installed the Vodafone software, it works fine the first time I use it and then, after unplugging, when I use it again it never works.
The Vodafone Mobile Connect launches, accepts the password, measures the signal but when I tell it to activate, it just hangs and I have to force quit. Sometimes, after force quitting I can still do the normal connection (choosing modem and connecting) but this only works sometimes.
Does anybody have this problem also? How can I fix it?

I am experiencing a similar problem with Vodafone Mobile Connect 3G (Version 2.08.01.00), however, I am not running OS 10.5. The modem was working fine on both of my computers for about 3 weeks, but now it does not work on my Macbook while it continues to work on my old iMac. When I launch VMC it hangs before the activation window appears and I have to either force quit or it quits itself; no error message window appears. Both computers have the same recent software updates from Apple. I am going to do a clean install of the old software on the Macbook, but I am nervous that when I unplug the modem from my iMac, the same problem will occur on it and then I will be without a connection.
I downloaded VMC software (in English) from here:
http://www.business.vodafone.com

WAAS Mobile - Client install on a biometric enabled laptop

WAAS Mobile 3.4 client fails to install on a laptop with fingerprint authentication with the message relation to "incompatible ÑÐ¸Ð»Ðµ". ÐÐµÑÐ°Ð»Ñ Ð°s follows:
Authentication Manager
BIOLSP.DLL
Version 1.4.0.99
Any ideas how to sort this out?
Thanks
DG

Please park this question for now. The installation problem was resolved by upgrading the Wave Systems Dell Embassy trust suite to ver.V2.0.0.39.
The problem we have now is with the client failing UDP connection test. I will investigate further, unless it is a 'known' problem and someone knows a solution.
Thanks
DG

Issue Uninstalling WAAS Mobile Client on Windows 7

I upgraded my laptop in hopes that issues pertaining to Vista would be resolved. Those issues remained, but was going to try to uninstall and reinstall under Windows 7 and check this for grins. I have tried to uninstall and get this error -
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Cisco WAAS Mobile was interrupted before the installation/uninstallation of your software was fully completed. You can rerun this wizard at another time to complete the setup of this software. (1722)
I've tried rebooting, but get the same error.
Any suggestions?

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
The quickest solution might be to try to reinstall followed by another uninstall, or to use the Windows Install Cleanup Utility, (although Microsoft has removed it from their support site with the following disclaimer).
Notice
This article previously contained a link to the Windows Installer Cleanup utility (MSICUU2.exe). If you were directed to this article to solve a problem installing a product other than Microsoft Office, please contact your software manufacturer for installation support on the product.
While the Windows Installer Cleanup utility resolved some installation problems, it sometimes damaged other components installed on the computer. Because of this, the tool has been removed from the Microsoft Download Center.
Nonetheless, here is an active link and basic instructions:
http://majorgeeks.com/download.php?det=4459
1.     To use the Windows CleanUp utility, follow these steps:
a.     Click Start, point to Programs, and then click Windows Install Clean Up.
b.     Select the program that you want to remove, and then click Remove.
c.     Click OK, and then click Exit.
If these suggestions do not help, then perhaps a case should be opended with TAC and they could assist with gathering the installer log files.
-ken

Problem with clob_write under client 9.2.0.6: UnsatisfiedLinkError

Hi all,
I'm running Oracle client 9.2.0.4 on Windows XP and Java 1.4.1_3.
Writing or reading clob's works pretty well.
As i tried to update to Oracle client 9.2.0.6, i got the error
Communication failed: java.lang.UnsatisfiedLinkError: clob_write when i tried to write a clob. The same error appears when i tried to read a clob.
Is there a specific problem with clobs under this client?
All other JDBC operations work as good as before.
Thanks.

Here is another hint.
In your classpath, use the jdbc driver that's under your oracle installation to which you are trying to connect to (ie, <ORACLE_HOME>\ora92\jdbc\lib\ojdbc14.jar).
I had the same problem in 9.2.0.6 and its gone when I replaced the ojdbc14.jar. I copied the ..\ora92\jdbc\lib\ojdbc14.jar to my java client program's classpath, and ran the java client without getting the UnsatisfiedLinkError.
It looks like the ocijdbc9.dll under ora92\bin has to match correctly with the jdbc drivers you would be using. I got this idea from this link:
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/6330927813/m/705001068631/inc/-1
Hope this helps.

Apple's xpress port has a problem with Apogee mobile card...

Who can I speak with about this problem? I tried here, I tried Apple support ? Nobody can answer my question about this problem? I purchased a new MacBook Pro in January to use with Apogee mobile card but the xpress port in MacBook Pro has a major problem because of it's new design? Please can someone convey were to get help in Apple or a least an answer..Please someone.........

Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected]

Problems with transmision torrent client

Dear all,
I have Iomega EZ-3 and on it running transmission torrent client.
lenovoemc_Torrent 3.2.19250 Up to date
The problem is the destination of downloaded torrents. It's not on desired destination. On selected folder 2 subfolders were created - "add torrents here" and "incomplete". And when torrent is downloaded, there is no file. In web gui double click on torrent gives some additions informations:
Location: /mnt/pools/A/A0/Documents/Downloads
Where is this location and how can I access it? I have a lot more problems with built-in torrent download client so this one problem should be easier to solve... I have latest firmware on Iomega EZ-3: 4.0.8.23976
Kind regards,
Ziga

I'm not sure why the completed file would not end up in the destination folder. Have you searched the all the folders on the device to see if it ended up in another folder somehow? The built-in torrent client has some issues on some devices, which is why we added support for Transmission.
Maybe try asking their support forums? - https://forum.transmissionbt.com/
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Problem with Oracle 9i client to access multiple oracle databases

I am having problem setting up oracle client 9i to access multiple oracle db. When I finish installing Oracle 8.x client, I simply replace the tnsnames.ora that the installation created with the ones that I have. I can access three different databases. I only need to add three diffrent entries in the tnsnames.ora file. I cannot be able to do this with Oracle 9i client. I follow the instruction from the CD installation to use local naming method. It appears that Oracle client try to create multiple entries on my tnsnames.ora file but I can only be able to access one db.
Any help is appreciated.
Thanks! HD

the old tnsnames.ora is working with Oracle 8 client. The new tnsnames.ora (if I use the Oracle Net config) have two entries, one is dev and the other is prod.
Thanks!

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

A problem with WAAS mobile client

Similar Messages

Maybe you are looking for