A project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck . All my finished projects that are in the Library infected with the same symptoms and it happens only after I w
a project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck .
All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.
I tried to open a new project and everything works
...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
the problem is that this project will take me a long, long time to rebuild
imovie 09
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
This recently happened to me. I am a novice, but it seemed like that project got corrupted some how.
I deleted it.
Went to time machine and picked it up again when I knew it was working ok.
I lost a few hours of work, but not the entire project.
Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work).
Similar Messages
-
On my ipod touch the screen is white, and i've tried pressing the home button and lock button at the same time and nothing happens... what do i do?
On my Ipod touch the screen will not work. I can't slide it to unlock
Try here > iPod touch: Troubleshooting touchscreen response -
Please help.
You need to hold down the two buttons for at least 30 secs. This should shut the device down, ready for a reboot start.
-
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?
paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'... -
Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone? Both my wife and I have the same phones and are both having the same issue. We can only hear every other word of the person we are talking to. This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur. Absolutely no problem with data. The data speed is great.
"Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
Customer Agreement | Verizon Wireless
While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described. -
Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works
Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!
-
We have two iphones each with a different apple id - can i use the same laptop and itunes for back up, restore and updates without risking having my apps overwritten. Basically does itunes keep the two iphones as two separate entities ? Does iTunes differentiate between the two devices and keep two different SYNCs ?
Yes, you can use the same computer for BACK UPS, RESTORING AND UPDATING. But that is it.
You cannot, however, use it to sync the different devices. iTunes will only recognize one device to sync with and if you sync any other devices with that iTunes library, it will replace what is on the phone with whatever is in the library. It cannot differentiate between devices. At most, it will jsut recognize that the phone has been synced with a different iTunes library.
So if you would like to use the same computer for backing up, restoring and updating, just make sure to turn of Automatic Syncing in your iTunes Preferences. -
When I create a DDE server with serveral topics, all on the same service and with the same item name (different topic), it appears that an advise link does not function properly. It doesn't work at all, it update only when the advise link is terminated or only one of the topics can use an advise link.
eg.
On one DDE server I have 2 topics:
topic1:
servicename: DDEserver
topicname : C(1)
itemnames : P(1), P(2), P(3)
topic2:
servicename: DDEserver
topicname : C(2)
itemnames : P(1), P(2), P(3)
Only the topicnames differ!
Now I can't get an advise link working on one of the items (sometimes on one, but not
on another).
Normal (non-advise) links are working fine however.
(In my case there is no other solution since this DDEserver should be compatible with an older one, created earlier.)I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
My wife and I both have iPhones and iPads. Can we both have access to the same iTunes Match library or do we have to have separate subscriptions? Our devices are synced to the same computer and we currently download titles from the same library. We both use separate apple id's on our devices.
You need to reconfigure your phone for use with your Apple ID. I suggest you restore yours as new then reconfigure it with your information and Apple ID. Be sure to disable Find My Phone, if it's enabled, before proceeding.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
Query parameters with the same name and different values
According to HTTP, multiple query or post parameters with the
same name and different values are permitted. They are transfered
over the wire in the following format -
name1=val1&name1=val2&name1=val3
The problem is that I can't see anyway of assigning multiple
parameters with the same name and different values to the request
object of mx.rpc.http.HTTPService. I have tried using the
flash.utils.Dictionary object as it does strict key comparison but
that doesn't work too. I have tried setting an array of values to a
property of the request object but that sends the request to the
server in the following format -
name1=val1,val2,val3
The java servlet engines throw exceptions when they see this.
Any help would be greatly appreciated.If you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy -
LR is putting different descriptions of the same lens, used with the same camera, in the metadata of photos taken on the same occasion.
For example:
The following two images were taken with the same camera and lens.
They were imported at the same time into LR by copying.
The only difference in treatment is that the first was an untouched out-of camera jpeg, the second had been flipped using Preview on the Mac.
The one that was flipped has a full description of the lens, the one that was untouched has an abbreviated description.
When you show the file in the Finder and read the metadata using Preview, the correct full lens description appears.
Why is LR displaying the metadata differently for these two files?Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?
Maybe you are looking for
-
Multiple apple Id app transfer
Currently we have one ios device, and planning to have another with a different apple id. we want to use the apps we already purchased on the first ios device, and bring them over them to the second, without having to repurchase them. I have prepaire
-
Cannot create SOA-MDS connection for JDBC driver issue
I am unable to create a SOA-MDS connection in JDeveloper 11.1.1.6. We are using MS SQL Server database and have put the sqljdbc4.jar file into a library in our JDeveloper environments. We can use this to sucessfully create database connections. Howev
-
Confusing about Message filter and Content filter
I have a message filter do quarantine action: badbody: if body-dictionary-match("badbody", 1) { quarantine ("Policy"); deliver(); also I write a content filter 'good' to see what spams are missed by Ironport Antispam: Conditions (only if all conditio
-
I plugged in the iphone 5 to PC via itunes what should i do between Set up as new iphone or Restore from this back up? i just want to transfer all my purchased apps and contacts to my new iphone? don't want to screw thing up. Please help..... thank
-
Device Profile Default Problems
I am trying to create a default device profile for extension mobility for a 7961 phone. It is not in there. I see 7960s and 40s but I dont see any 41s or 61s. Any body run into this?