A question about Activity Monitor!

Hi all
Is there a way to know the MBP temperature (any) by using Activity Monitor? or Terminal?
I use iStat Menus but I need to know for my information.
Thanks

No. The Terminal shell contains no commands to access temperatures directly hence the need for software like iStat.

Similar Messages

"Simple" question about Activity Monitor

When Activity Monitor displays percentages, is that percentages relative to what else is running, or is that percentage of the CPU's processing capacity? Something that is using up 30-40% of the CPU's processing capacity is a lot more intense than something that is using 30-40% of the CPU's activity AMONGST the other threads running.
So which is it? Percentage of the CPU's processing CAPABILITY or percentage of what the processor is chewing on right now - regardless of how much more it could chew on.
This will help us decide if our current xserve (1G, 1CPU, G4) is adequate for our needs or we're constantly maxing out the processor and need to look for a faster server. I don't want to replace an older, but still adequate system just because newer is obviously faster.

It's entirely possible for a process to use more than 100% of a CPU.
In the case of a dual-CPU machine you could use up to 200% (100% x 2 CPUs).
In the case of a quad-core machine (2 x dual-core CPUs) you could see up to 400% (100% x 4 cores).
An 8-core server could see up to 800%
You see, the 100% mark is based on each CPU core, not all cores combined. I guess that wasn't clear in my earlier response.

Question about Activity Monitor

I was looking at activity monitor to see how things were running and I noticed on %CPU I was between 125%-175%. Can it do this because it is a dual-core processor? And is this bad/a lot if that is the only program running?
Thanks,
John

Post an image of your Activity Monitor. This is mine:
Make certain that you set it to show ALL PROCESSES and % CPU is set to display values from high to low.
Ciao.
Ignore the red circle.
Message was edited by: OGELTHORPE

Question about activating iPhone

I'm getting a iPhone soon, and have a question about activation. Is a credit card or debit card required during activation?

The credit card is used to setup an iTunes Store account, Small tip. Set one up before activation to cut down on activation setup time.
You can remove the credit card info off your iTunes account after it is setup. It is simply used for when you want to purchase music, videos, etc. off the iTunes Store.
If you do not have a credit or debit card, Try going down to your local Walmart or Drug store, Some of these places sell Fillable Credit cards. You can buy the cheapest one they have and use it for Setup of the account. And simply refill it if you need more money for any purchases.

Question about dual-monitor setup - advanced dock + PCIe card

I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
Primary monitor: Acer AL2416W (1920x1200 DVI)
Secondary monitor: Dell 1901FP (1280x1024 VGA)
I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
2. Which PCIe cards are compatible with the advanced dock?
3. Can I achieve the same resolutions with the advanced dock + PCIe card?
4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
thanks!

Gary -- don't turn on the OS Display Mirroring. Turn it off.
You want Aperture to control how it uses your dual monitors. (You do not want the OS to determine it.)
Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
That set-up is:
"View → Main Viewer → {anything}", and
"View → Secondary Viewer → Alternate"
You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting. If you are in the Browser, activate the Viewer by double-clicking an Image.
Let me know if that doesn't work.

Question about "activated" status

Hi again!
Got another question regarding Applescript studio app. Most apps I notice if you close their window and the app allows itself to stay open, by double clicking the icon or clicking the dock icon it would reopen that window. But I notice that if you would close the window and "activate" the app by Expose or -tab that some apps will reopen the window and some won't...make sense? So I guess my question is how would I make the app reopen its main window that was closed if you would click it's icon, but not if it was reactived in Expose???
Thanks,
Reg

From some quick experiments it looks to me like "will become active" and "activated" are going to get called any time your app is activated regardless of whether it's due to command-tab or clicking the dock icon. So if you're only wanting to open an new window on a dock click I don't know how you could really use either of those and be able to tell what caused your app to be actived.
On the other hand it appears that "should open untitled" may do what you're wanting. It appears that "should open untitled" gets called if your app does not have any open windows and it gets activated by a click on the dock icon. It does not seem to get called if you switch to your app using command-tab. Nor does it get called following a dock icon click if you already have a window open.
It also does not get called if your app does have a window and you switch to it by clicking the window in Expose. Is it even possible to switch to an app through Expose if the app does not have any windows to click on?
I'm not sure what other circumstances could cause "should open untitled" to be called so you may have to experiment with it some more.
Steve

The question about activity allocation

business scenario:
1, The sole purpose is to capture costs, use KB21N for activity allocation.
Question: in WBS or netwok activity. there is no relevant work time.
Please explain me all the steps to be required.
Thanks in advance

Hi,
I under stood as follows.
You want to capture actual cost in PS. For this you need to have Work centers.
Assign the same to internal actvities. Release the activity and confirm the same.
In SAP, Standard report, you get No hours Actuals, Planed... etc. Check in CN41, CN71 and execute the Project. Check the field selection, there you get the details you required.
Hope my understanding is correct.
Regards
N.Raju

Questions about interfaces,monitors,keyboards,cables help please

I just bought a macbook pro 1.87ghz. w/ 1 gb I would like to record music primararly acoustic stuff (john mayer type stuff) I was wondering what types of
interfaces or keyboards, mics, monitors, cables ,should I buy to get the most professional sound with. I have a budget of about 1200.00 I want to spend any recommendations? Please Help I appreciate your time:)

What I would probably go with in this situation, using the limited information you have given:
Interface - Presonus Firebox $300
Keyboard - M-Audio Oxygen 8 v2 $150
Mics - Studio Projects B1 and C1 $300
Monitors - Event ALP5 $300
(really would depend on whatever small monitor sounds best to you)
Cables (firewire, usb, mic, stands, etc.) - $100
Now you will probably get as many different answers as you will responders but the best advice I can give is to read everything you can on recording and mixing. During this time, save up another $800 or so and treat your recording and mixing area.

Theoretical question about the monitor

Hello,
in my diploma thesis I compare the bw with a reference modell to check wether the bw is a "real" dwh or not.
The reference describes the monitor as component which observes the source systems and checks for changes to afford incremential loading.
The monitor of the bw observes the loading processes in the bw.
So there's a difference. Nontheless there must be further monitor which is conform to the reference, or? I did not find any information about that one.
Does anyone know about it?
Tobias

Hi Tobias,
as you already know, BW monitor it's not a delta monitor (as your reference describes), but only an administration tool that allows to follow your dataloading...
Generally speaking, in BW there is no a specific component "which observes the source systems and checks for changes to afford incremential loading" because (but only for delta-capable datasource) this is done in source system itself (and this is the integration concept typical of all SAP products) thanks to different mechanism (timestamp field for some flows, delta queue for others, generic delta and so on)...
Anyway, even BW has a delta management mechanism, but related to its datamart (loading between an ODS and a cube, for example) only and you can observe it from the changelog table and thanks to ROCANCEL field...
Hope it helps!
Bye,
Roberto

Questions about activation locks? Help?

Okay so I bought an iphone 5 off kijiji and everything is fine so far but I have a few questions. It says "SIM required" and I don't have a SIM card yet as I'm getting one next week. I'm not sure if it's activation locked. My questions is Does the activation lock alert pop up before it asks for SIM? Or after when I've put in my SIM?
Hopefully that makes sense because I don't have a SIM yet and I don't know how else to check if its activation locked. Please reply.

It checks for activation lock when you attempt to activate the phone with a SIM card in it.

Question about Activity Reports

Hi,
I tried to use Activity Reports on our Portal to find out the each instance is doing, but the iView does data aggregation. Does anyone know how can we obtain statistics on dialog instance's activities? I was hoping the report would give me details on
1. how many requests did the instance server during a specified time frame
2. what activities did the instance do during a specified time frame
Many thanks in advance.

Hi Voon,
The details regarding the Dialog Instance that you require can be attained by the following activities -
Dialog Overview Monitor - You can use this monitor to check the most important values for the SAP dialog system and the number of users logged on, broken down by application server.
Features include -
1) Dialog Response Time
2) Network Time
3) Standardized Response Time
4) Users Logged on.
This is detailed information regarding the same -
[Dialog Overview Monitor|http://help.sap.com/saphelp_nw04/helpdata/en/31/d7843b43c8e937e10000000a11402f/content.htm]
Also there is an "Dialog Per Application Server Monitor" --
[Dialog Per Application Server Monitor|http://help.sap.com/saphelp_nw04/helpdata/en/9e/08443c4a082335e10000000a114084/content.htm]
Entire System Monitor --
http://help.sap.com/saphelpnw04/helpdata/en/9c/f78b3ba19dfe47e10000000a11402f/frameset.htm_
Reward points if helpful
Regards,
Shailesh Nagar

Question about activation key for pre-installed software after hard drive failure.

I had a hard drive failure on my MacBook Pro last week and had it replaced by Apple. When I restored my computer with a Time Machine backup, Office 2011 wants an activation key to start up again. Problem is, I had Office pre-installed when I bought my MacBook by Apple. Where do I get the activation key to get it working again?
Thanks
Q

Do you still have the signons.sqlite and key3.db files from the IT setup?
You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
Look for:
* chrome://weave (Mozilla Services Password)
* chrome://weave (Mozilla Services Encryption Passphrase)

Question about activation

Hey, i just got my 16gb white iphone 3g and right now i know the servers are over loaded and what not, but when i plug in my iphone it says "NO SIM CARD INSTALLED Insert an unlocked and VALID sim to activate iPhone."
but, it has the sim card in there that AT&T gave me... is this normal?

nevermind! i got it activated and synced!

Urgent question about two monitors for Sun Ultra 40 M2

Hello,
I feel extremely unhappy to ask you the following.
I bought recently a Sun Utra 40 M2. I thought that with NVIDA Quadro FX1500 one could have two monitors as there are two DVI-D 's to connect with two monitors.
But today I heard from SUN support that Sun does not support two monitors under SUN Solaris 10. It is possible with Linux on this SUN Ultra 40, but not with Solaris, so it was told to me.
But: is this true? I still can not believe it.
with friendly greetings,

Hello,
I see, with Windows it is possible just lik that and with Solaris one needs two cards.
Well, it seems for a one man"s business customer like me: end of story.
I still can not believe it that Sun would arrange this.
I will wait and see.
with friendly greetings,
P_ter

Question about Active Directory Configuration

Hi All,
Portal Version : EP7.0 SP7
We want to configure Active directory as a Portal UME store.
We have 7 Domain controllers in the domain xyz.com. They are spread across locations. I assume, by default domain controller will have global catalog defined.
So in LDAP configuration, whether we to use Global Catalog (Port: 3268) to connect to ADS or LDAP connection(Port:389)?
I am not clear, when Global Catalog connection is defined to bind ADS to Portal UME?
Any suggestion?
Thanks & Regards,
Gowri

Hi Gowri,
It will work fine if you connect through port 389.
Can you please explain it in detail that How you have spread your domain controllers / your forest hierarchy?
Check if this helps.
Thanks,
Mittal

A question about Activity Monitor!

Similar Messages

Maybe you are looking for