A question about beepings.. this the ....

this is the beeping order before the bios screen shows up:
beep
beep
beep
beep
*pause*
beep
beep
*short pause*
beep
any idea what the message is supposed to mean? and now we're at it, how do i fixe it?

Bass,
here is a good guide to beep codes
http://www.pcguide.com/ts/x/sys/beep/index.htm

Similar Messages

Question about setup_MITE in the PCI-MIO-16E-1

I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
natinst.public.daq.driver-development.general
Christian
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Another BW question about filter in the query definition

Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu Jia

HI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri

General questions about subscriptions in the context of application exports

Hello,
I have two sample applications (Apex 4.0.2), a "master" one and a "subscribed" one, which has a page template subscribed to a page template in the master app.
Looking at their export files, I see:
- Master app:
-- This is the master template
wwv_flow_api.create_template(
p_id=> 32173830131265449 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',- Subscribed app
-- This is the subscribed template
wwv_flow_api.create_template(
p_id=> 19843209078190645 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',
p_reference_id=> 32173830131265449,
p_translate_this_template => 'N',
p_template_comment => '');
end;A couple questions to help me understand how things work behind the scenes:
- Just out of interest, in the subscribed app export shouldn't it be p_reference_id=> 32173830131265449 + wwv_flow_api.g_id_offset to keep things in sync?
- If I export both applications from my workspace, delete them and re-import them (first the master, then the subscribed) the subscription remains valid. On the other hand, if I import them into apex.oracle.com, the subscription is lost. Is this the way it should be? Is there a way to keep the subscription?
Thanks
Luis

Hi Moni,
In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
/wojciech
> Hi,
> When we use Business system, there will be
> corresponding Technical System, and associated
> Products and SWCV. So it is very clear Where to
> declare my SWCV in SLD. And no confusion about
> transporting SLD objects.
> But with Business service, It is not declared in
> SLD, So there is no related Technical System, no
> product. But I need to define SWCV so that i can
> import in to repository to define my design
> objects(DT,MT,MM etc).
> Here are my questions.
> 1. In which Product i need to define the SWCV?
it doesn't matter
> 2. Do i have to have a product associated with every
> SWCV?
actually all swcv should be in some product
> 3. Do i have to have a Technical system when i use
> Business service?
no
> 4. How do I transport SWCVs from dev SLD to TEST SLD,
> without Technical system and Business System?
I don't know.
> 5.Do i need to transport the SWCVs from dev SLD to
> test SLD as it working fine without doing SLD
> transport?
>
In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
> Thankx
> Moni
<i>** Please reward points if found it useful **</i>

A question about some of the features

I have Vista so therefore am unable to use the trial version of photoshop elements. Before I go ahead and purchase the software, I had a few questions about its features.
I'll mainly be using photoshop to create digital scrapbooks. I know that photoshop comes equipped with themes and images, but I would like to know if I can use my own backgrounds and images. If I am able to use my own backgrounds, can they tile?
Another thing I would like to know is if I can create my own projects with custom dimensions.
Lastly, I'll be using photoshop to sprite. Is elements well suited for spriting? More specifically, does it have a color selection/replacement tool?

I use PSE for digital scrapbooking. Instead of using the "built in"
creations and albums, just create your own PSD files with layers of
whatever images/embellishments/background papers you want. You can
specify whatever size of creation you want when you create your PSD file
(you only have the choice of certain sizes when you use the built in
stuff).
Not sure about what you mean about making your backgrounds tile, but I
think it is possible. You can take a "background" paper, do a selection,
and then define a pattern and fill it. Or, if you mean layer your
background papers - yes you can do that too. (Here is my online
scrapbook pages, all of which were done in PSE 4 or 5:
http://www.scrappersguide.com/forums/gallery/showgallery.php?cat=500&ppuser=413)
You can select by color (using the magic wand tool) and you can replace
color, but it may not work exactly as you expect. (I also don't know
what spriting is.) But, many people just use a hue/saturation adjustment
layer to change colors.
-Trish

General question about packages after the -Rs removal

Hi !
This is more of curiosity question . I was always wondering after i perform the command pacman -Rs package and then i try to install it again the downloaded size is 0 kb
Meaning that the file is already stored on my hard drive . How can those packages be removed from my hard disk ?

shak wrote:OK thanks for your help . The only relevant command i found is pacman with the -n option , nosave. Is this the one ?
No. the nosave option is for config files that would be saved as .pacnew if the option was not passed in.
What you need is
sudo pacman -Sc
This will clean your cache and remove all the packages that are NOT installed on your system.
If you want to remove every package from the cache then pass in an extra -c option
sudo pacman -Scc

[EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos

Question about shutting down the middle tier while leaving the DB up

Hi,
We just successfully upgraded 11.5.10.2 from running on 9.2.0.8 SOLARIS SPARC 32-bit to 11.2.0.1 SOLARIS SPARC 64-bit.
I am in the process of rewriting the backup scripts. We used to do a once-a-week backup (zip) of the middle tier directories,
after shutting down EVERYTHING cold (MT first, then DB listener, the DB). Our DB consultant likes hot-only backups of the
DB so we are going to keep the DB running all the time and always do hot backups from the DB, but keep MT cold backup.
We want to keep our MT cold backup so we retain our downtime window that users expect (Saturday night - Sun morning).
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up?
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.
MH
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.

Hi,
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up? There should be no issues.
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?Correct.
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.You still need to wait for sometime for the CM to shutdown, that's all.
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.You should be OK with your approach.
Thanks,
Hussein

Why can't someone from apple answer my question about upgrading to the current version of Itunes

I am amazed that I have been posting questions for months about this issue and no one has given me an answer!!!! Does Apple not track these discussions?
I have Windows 7 64-bit and am trying to upgrade Itunes to the current version, with no suggestions.
I have found and tried the 64-bit installer and receive the following message:
'This itunes installed is intended for 32-bit versions of Windows. Please download and install 64-bit Itunes installer instead.'
I have itunes 9.1.1.12 currently installed.

Okay ... it's behaving just like the PC Mover thing. 32-bit versions of iTunes and AMDS have somehow been jammed on the PC. When you go to uninstall either of them, the 64-bit Windows installer service encounters 32-bit installation configuration information, goes into a fantod, and you get the error message.
So we'd better try clearing away that installation configuration information, and then trying another update.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
Next, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

[EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.

OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS.

Question about repeating in the process chain

Hello Gurus,
        my DTP is set as "valid records update, no reporting (request red)", and put into a process chain. the process chain goes wrong on this DTP due to some erroneous records. my questions are:
   (1) based on DTP configuration, all the records are transferred to target successfully except for those erroneous records. is that right?
   (2) after I correct those erroneous records in PSA, I repeat this DTP process in the process chain. what exact data are transferred by this repeating operation on this DTP? do we need to take care of all the previously loaded data for this subsequent repeat loading ?
Many thanks.

Hi ,
Please refer my article for your answer, also this has lots of good DTP features.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36?quicklink=index&overridelayout=true
(1) based on DTP configuration, all the records are transferred to target successfully except for those erroneous records. is that right?
Yes. All the erroneous records go in the error stack and then you can fix the errorneous records there and execute the error DTP.This setting ensures, incorrect/incomplete data is not available for reporting.
(2) after I correct those erroneous records in PSA, I repeat this DTP process in the process chain. what exact data are transferred by this repeating operation on this DTP? do we need to take care of all the previously loaded data for this subsequent repeat loading ?
No records are transferred on repeating teh job. We need to manually set the status of request to Green.Yes we need to take care of all the subsequent steps.
-Vikram

[SOLVED] Question about "loadkeys" from the install procedure

https://wiki.archlinux.org/index.php/In … ard_layout
https://wiki.archlinux.org/index.php/Be … the_keymap
# loadkeys ro_win
They show up as black squares... Even after generating these locales, as per the Beginner's Guide:
[root@archiso ~]# locale-gen
Generating locales...
en_US.UTF-8... done
ro_RO.UTF-8... done
ro_RO.ISO-8859-2... done
Genetation complete.
What do?
PS: I noticed that they're activated with "Alt+Shift". There's no mention in the Install Guide or Beginner's Guide about this. Heh.
Last edited by DSpider (2012-08-24 14:45:34)

From the LiveCD (in VirtualBox):
# nano x
<wrote these characters>
# cat x | curl -F "sprunge=<-" http://sprunge.us
And they show up fine: http://sprunge.us/MKBj
ăîşţâ
ĂÎŞŢÂ
Until a better explanation comes along, I've added this info to the BG:
Don't worry if some of the letters show up as white squares or as other symbols. It's probably just the console font missing those glyphs. The glyph codes are correct and if you press the correct keys they will show up fine when (or if) you set up a graphical environment later.
https://wiki.archlinux.org/index.php/Be … the_keymap
I guess I can mark it as solved...

A question about gaming on the imac

So i just got a 17" imac (2.0ghz) version with the 1gb memory and radeon x1600, and i was wondering, if it will be able to work good with unreal tournament 2004, and also if it would possably work with Counter strike source if i downloaded boot camp. Thanks : ).
Mac OS X (10.4.8)

The Universal patch is for the full-game, not demo.
Here's some infor about the patch and link for the patch BTW...
http://www.macnn.com/articles/06/02/03/unreal.tournament.2004/
http://www.macgamefiles.com/detail.php?item=18155
I do not own the game, so I cannot comment on the widescreen thing, my games play fine on my 24" iMac. Are you looking to have the black bars on the top and bottom? I guess it would depend on the resolution you set in the settings.
If this helps, please award points accordingly. Thank you.
-Nick

Question about output through the DVI port

The problem: I am using a DVI to HDMI cable to send video to an AV receiver. The AV receiver strictly only accepts a DVI-D (Digital) signal. Upon turning it all on, the MacBook Pro screen reloads and appears to be sending video out, based on the AV receiver's model name appearing in the Display's menu bar. The receiver however reads "No Signal". Most likely this is because the MBP's dual-signal port is giving it problems (it can send both analog and digital).
Is it possible to elect to send a digital-only signal? The cable itself does not include the extra pins for analog, so I'm not sure why it would think it is.
Keep in mind I'm not entirely sure this is the problem, I just have confidence in this theory.
Regards,
Edward

HDCP: The cause of, and solution to, all of life's problems.

Question about backing up the info already on your phone...

I just had to reinstall osx on my mac pro.
I have all of my contacts on my phone and nothing in my address book on my comp. How do I back them up to address book without loosing them during sync?
same with calendar too.

iTunes uses the iSync framework to sync with your phone. Whenever there are conflicts it will throw up an messages asking you to choose the correct entry (for Address Book or iCal) from your iPhone or your computer.
in iTunes when your iPhone is connected there is an option "Replace all information on this iPhone" which, if checked, will overwrite everything on your iPhone with whatever is in your computer. As long as this is not checked, I think iTunes should re-populate all of your entries.

A question about beepings.. this the ....

Similar Messages

Maybe you are looking for