A question about fiting movie in the browser

Hey!
Im wondering how you get your movie file to cover the whole
browser window, cause even when i have a pic covering the whole
stage in flash it dosent cover the whole window in the browser.
hope someone can help me with this prob.
thx for you time

When you first set up the New Flash movie, go to
modify/document/demension
properties. The settings here set up the size of your movie.
When you publish, under the html tab, change your demensiont
to 'percent'
and make each 100%
You'll have to experiment both of these settings.
"korubana" <[email protected]> wrote in
message
news:egu5eg$nb1$[email protected]..
> Hey!
>
> Im wondering how you get your movie file to cover the
whole browser
> window,
> cause even when i have a pic covering the whole stage in
flash it dosent
> cover
> the whole window in the browser.
> hope someone can help me with this prob.
>
> thx for you time
>
>
>

Similar Messages

Question about centering webpage in the browser

Hi,
My page is left justified right now.
I have everything located inside of a div called container. I have a CSS rule as well. What do I need to add to the CSS rule to make the page center in the browser? Thanks.
<div class="container">stuff</div>
.container {
background-image: url(images/HOME-PAGE-BOAT.jpg);
background-repeat: no-repeat;
background-position: center top;
height: 900px;
width: 1260px;

For reference, margin:0 auto; is shorthand for
     margin-top:0;
     margin-right:auto;
     margin-bottom:0;
     margin-left:auto;
Not quite sure why it pushed it to the right.
EDIT:// Re:Background image. I would put the image on the <body> or <html> tag which won't have this problem. This link might offer some guidance for a possible solution.

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

Question about Kurts comments discussing the seperation of AIA & CDP - Test Lab Guide: Deploying an AD CS Two-Tier PKI Hierarchy - Kurt L Hudson MSFT

Question about the sentence in bold. What is the meaning behind this comment?
How would you separate the role of the AIA and CDP from a CA subordinate server? I can see where I add a CES and CEP server which has those as well, but I don't completely understand his comment. Because in this second step, (http://technet.microsoft.com/en-us/library/tlg-key-based-renewal.aspx)
he shows how to implement CES and CEP.
This is from the guide located at: http://technet.microsoft.com/library/hh831348.aspx
Step 3: Configure APP1 to distribute certificates and CRLs
In the extensions of the root CA, it was stated that the CRL from the root CA would be available via http://www.contoso.com/pki. Currently, there is not a PKI virtual directory on APP1, so one must be created.
In a production environment, you would typically separate the issuing CA role from the role of hosting the AIA and CDP.
However, this lab combines both in order to reduce the number of resources needed to complete the lab.
Thanks,
James

My concern is, they have a 2-3k base of xp systems, over this year they are migrating them to Windows 7. During this time they will also be upgrading hardware for the existing windows 7 machines. The turnover of certificates are going to be high, which
from what I've read here, it worries me.
http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
The application then can go to those locations to download the CRL. There are, however, some potential issues with this scenario. CRLs over time can get rather large
depending on the number of certificates issued and revoked. If CRLs grow to a large size, and many clients have to download CRLs, this can have a negative impact on network performance. More importantly, by
default Windows clients will timeout after 15 seconds while trying to download a CRL. Additionally,
CRLs have information about every currently valid certificate that has been revoked, which is an excessive amount of data given the fact that an application may only need the revocation status for a few certificates. So,
aside from downloading the CRL, the application or the OS has to parse the CRL and find a match for the serial number of the certificate that has been revoked.
With the above limitations, which mostly revolve around scalability, it is clear that there are some drawbacks to using CRLs. Hence, the introduction of Online Certificate
Status Protocol (OCSP). OCSP reduces the overhead associated with CRLs. There are server/client components to OCSP: The OCSP responder, which is the server component, and the OCSP Client. The OCSP Responder accepts status
requests from OCSP Clients. When the OCSP Responder receives the request from the client it then needs to determine the status of the certificate using the serial number presented by the client. First the OCSP Responder determines if it has any cached responses
for the same request. If it does, it can then send that response to the client. If there is no cached response, the OCSP Responder then checks to see if it has the CRL issued by the CA cached locally on the OCSP. If it does, it can check the revocation status
locally, and send a response to the client stating whether the certificate is valid or revoked. The response is signed by the OCSP Signing Certificate that is selected during installation. If the OCSP does not have the CRL cached locally, the OCSP Responder
can retrieve the CRL from the CDP locations listed in the certificate. The OCSP Responder then can parse the CRL to determine the revocation status, and send the appropriate response to the client.

Questions about Downloading Movies from Itunes

I have used itunes extensively for my music, but have never downloaded any movies or video. If I downloaded a movie from the Itunes store can I then burn it on to a disc. If so, it needs to be a DVD-R disc not a CD-R right? This may sound like a really dumb question, but I have never done this before. Thanks

From the itunes store terms of service:
"You shall not be entitled to burn video Products"
http://www.apple.com/legal/itunes/us/terms.html

Question about Setting Window Title/the use of AVWindowSetTitle()

Hi everyone,
I have a question about setting the title of the window in which the Acrobat viewer normally opens a PDF file. The documentation states that AVWindowSetTitle() cannot be used in this case. However, using it has worked with versions of Acrobat/Reader up until and including version 8.
Everything breaks down starting with Acrobat 9.
According to the documentation I am supposed to do the following: "To set the title of a window in which the Acrobat viewer opens a PDF file, you must replace AVDocOpenFromASFileWithParams() and pass the window title in tempTitle."
Unfortunately, there are 2 problems I have with this approach:
     I do need to be able to change the document title on document Save, not only on document Open
     I do not know what AVDocOpenFromASFileWithParams() implementation has to look like if I have to replace it using HFTReplaceEntry().
Is there a sample customized implementation of AVDocOpenFromASFileWithParams() somewhere that I could take a look at?
Is there a way to change a document Title inside Acrobat/Reader window after a Save operation?
Thanks a million,
Lana2010K

     I am sorry. I don't know how you tested this and came to conclusion that this works correctly in Acrobat X.
     I just tested our Acrobat plug-in with a trial version of Acrobat X and this did not work.
     When we open a file in Acrobat (doing it ourselves in the plug-in by adding another specialized open) we set the window title to something different from the default file name. Then if a file gets edited and saved (File->Save), the window title gets reset to the file name. In the PDDocDidSave callback we call AVWindowSetTitle() to set it back to a more descriptive window title we need. This has worked up until and including Acrobat 8, but does not work in either version 9.0 or 10.0.
     Also, I just modified the plug-in code to always change the Window Title of every document (even if opened through native File->Open) on document Save. It does not work.
     Please help,
          Lana2010K

Question about Removing Permissions from the System Folder with chmod

Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!

OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

A question about Row Movement

I'm trying to do the Row Movement, but will it impact indexes? Will I have to re-create indexes or rebuild them?

On partitioned table, if you update the value of partition key of a row, the row move to the new partition and get a new ROWID. But no need to work on index after that.
Example :
Taken this partitioned table :
SQL> select table_name,partition_name,high_value from user_tab_partitions;
TABLE_NAME                     PARTITION_NAME                 HIGH_VALUE
MY_TABLE_2                     MY_TABLE_PART1                 1000
MY_TABLE_2                     MY_TABLE_PART2                 2000
MY_TABLE_2                     MY_TABLE_PARTM                 MAXVALUEOk, now taken a row of this table from part1. Note the ROWID, then see as well the explain plan and index usage :
SQL> select rowid,a.*
2 from MY_TABLE_2 partition (MY_TABLE_PART1) a
3* where id=258
SQL> /
ROWID                      ID DESCRIPTION
AAAO0TAAEAAACstAAA 258 DUAL
SQL> set autot traceonly explain
SQL> select rowid,a.*
2 from MY_TABLE_2 a
3 where id=258
4 /
Execution Plan
Plan hash value: 2906089138
| Id | Operation                          | Name        | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                   |             |     1 |    21 |     2   (0)| 00:00:01 |       |       |
|   1 | TABLE ACCESS BY GLOBAL INDEX ROWID| MY_TABLE_2 |     1 |    21 |     2   (0)| 00:00:01 |
|* 2 |   INDEX UNIQUE SCAN                | IDX_TABLE_2 |   645 |       |     1   (0)| 00:00:01 |       |       |
Predicate Information (identified by operation id):
   2 - access("ID"=258)Ok, now move the row from the first to the second part :
SQL> set autot off
SQL> update MY_TABLE_2 set id=1500 where id=258;
update MY_TABLE_2 set id=1500 where id=258
ERROR at line 1:
ORA-14402: updating partition key column would cause a partition change
SQL> alter table MY_TABLE_2 enable row movement;
Table altered.
SQL> update MY_TABLE_2 set id=1500 where id=258;
1 row updated.Well, now, the row is no more in first, but in second part as waiting.
Note the ROWID (different of above when the row was in the first part) :
SQL> select rowid,a.*
2 from MY_TABLE_2 partition (MY_TABLE_PART1) a
3 where id=1500;
no rows selected
SQL> select rowid,a.*
2 from MY_TABLE_2 partition (MY_TABLE_PART2) a
3* where id=1500
SQL> /
ROWID                      ID DESCRIPTION
AAAO0UAAEAAAPb3AAE 1500 DUALAnd now, see the explain plan and still index usage :
SQL> set autot traceonly explain
SQL> select rowid,a.*
2 from MY_TABLE_2 a
3* where id=1500
SQL> /
Execution Plan
Plan hash value: 2906089138
| Id | Operation                          | Name        | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                   |             |     1 |    20 |     2   (0)| 00:00:01 |       |       |
|   1 | TABLE ACCESS BY GLOBAL INDEX ROWID| MY_TABLE_2 |     1 |    20 |     2   (0)| 00:00:01 |
|* 2 |   INDEX UNIQUE SCAN                | IDX_TABLE_2 |    74 |       |     1   (0)| 00:00:01 |       |       |
Predicate Information (identified by operation id):
   2 - access("ID"=1500)
SQL> I would advise you the reading of the article of J. Lewis : When Should You Rebuild an Index?
HTH,
Nicolas.

Question about old movies and getting the motion.

In the middle of bringing in old 16mm movies to FCE. There are times when it seems as if the movie, after it has been captured, is running a little slow when viewed in the viewer? However, one of the short movies had sound, and this was captured perfectly. If there is any difference, it is extremely subtle. The one time I it was perhaps more obvious, was when I watched as someone dove into the water. The splash, seemed to me to be someone off, but not by much.
Is this something that is known? ( As far as I can tell, presets are all correct, and the fact that the "sound" film captured correctly, which seems to be a professionally recorded sports highlight film of 1947, leads me to believe all is as it should be. ). Again, there are times when I feel the players running down the field as just a little out of sync from where they should be.
For completeness, using a canon HV30. The transfer was done by a professional outfit here in Seattle, with a stellar reputation. Presets for capture used are DV-NTSC either alone, or 32 kHz with the sound.
Your thoughts would be appreciated.

Do you have an opinion as to whether this will cause a problem later as I add >music etc to the sequence.
It should be fine to do that.
Your Sequence will be either 32 or 48 kHz, the audio coming in needs to match or you have to render.
iTunes or QuickTime Pro can convert the audio to the required rate.
Now...all the captures done using DV-NTSC ( not basic)
The difference is to cater for different cameras rather than FCE Sequence setups.
An Easy Setup of _DV-NTSC 32 kHz_ acts the same as _DV-NTSV Firewire Basic_ as far as FCE is concerned, you just have two options for FCE to talk to your camera for capture purposes. If one does not work correctly the other problably will.
P.S. Maybe your new Canon can use the DV-NTSC Easy Setup correctly. I've been wondering why it's been taking them forever to bring it up to speed.
Al

Questions about old movies

I have a lot of movies that I had downloaded on my external hard drive all of which are in regular dvd format, my question is how would I go about streaming and watching those movies or for that matter converting to movies to any Apple format? Please any assistance before I buy an Apple Tv would help.

If you convert all the movies in a format accepted by ATV (m4v) you will be able to enjoy your ATV.
I see you are using PC and I not familiar with Windows software. But for MAc Toast 9, Quicktime Pro, Handbrake....etc.

Basic question about accessing card reader from browser

Hi,
I am very new to card technology. I have a very basic and general question not directly related to java cards.
I need to write a web application that allows the user to read a card with a card reader.
For that I maybe need to write an applet that has to access a native DLL and call methods
to get the card ID. I already have that DLL (written in Delphi) that reads multi-technology cards.
Then pass that ID to the application server to retrieve complete information
about the card holder and display them on the user browser.
Please could someone guide me on useful resources for that kind of development, for example
already existing developments, personal experience, design solutions ?
Thanks.
Adriano

Hi Joseph,
One thing I forgot to tell is that I work with contactless cards and readers.
Contactless cards use radio frequency. Despite this fact, the problem stays the same. I already have a Delphi DLL that reads contactless cards.
What I need is a way to retrieve card holder information from a client browser. The card contains a unique ID. My idea is to use an applet that reads that ID on the client-side and then calls a servlet on the server-side to retrieve holder information associated with that ID, i.e. first and last names, and finally displays them on the client browser.
So the card contains only the unique ID, a database on the server-side contains all other related data.
Technically the applet has to call the DLL via JNI.
Do you think that using an applet that way is a good solution, do you see simpler solutions, is there security issues ?
Thanks.

Question about versioning (history) in the latest release

Hallo,
Some questions:
1. Will versioning ever be integrated with locked pages, locked scene, colored pages, revision marks functionality etc, so that at a particular moment you can optionally augment the current versioning with the more traditional way of production revision cycles?
2. If above will not be the case (or is never activated): what currently happens with scene numbers & manual breakdown info that is already added, but than the scene gets deleted. Is all this info gone (& scenes renumbered). Can we save a version to keep this info? Please clarify.
3. Regarding breakdown of elements: will there be a way that we can visualize breakdown sheets on screen. It's much easier for me to look at it that way, e.g. the Scenechronize way (I guess I'm old).
4. Regarding breakdown and making the script 'production ready', will there be a way to combine scenes that belong together and part scenes (that are not in the same shooting location but where the writer chose to combine the action in one scene, eg like telephone conversation etc).
I guess all my questions boil down to this: will Story also aim to offer serious production breakdown features that could be used by production managers & assistant directors to prep for physical production, or will it mainly be a collaborative writing tool (even if it does allow you to transfer text into On Location shotlists and then eventually into your clips).
I guess there's a conceptual difference (at least when talking about narrative film with a lot of cast, locations, props etc): do you support mainly the writing effort and than transfer into a tool like Scenechronize once production starts - or do you go further? For (corporate) interview type shoots this matters less.
I would be interested to hear your views on the matter.
Regards,
Bavo

Yes. Versioning will be integrated with locked pages, colored pages but we are not planning to lock scenes yet. We will also show asterix against changed lines in future updates.
You can always explicitly save a version (file->save as) to mark a checkpoint draft. You can add your own comments while saving this draft so that you can find it later.
We'd like to support production related features because we want to leverage script metadata for all it can be leveraged for. That said, "full fledged" is a loaded term. We will take small steps and enable workflows related to production as we go along. Dynamic breakdown reports, that can be viewed and edited in Story are on our roadmap.
--Anubhav

Question about rearranging clips in the storyline

I hope I can explain my question clearly: I have a storyline with multiple connected clips. I want to add a generator under a clip so that I have a black background. In other words (and I don't know the propery terminology), I want to put a generator in and then take what is now the "main" clip and the clips connected to it and make all of them connected clips on top of the generator. But, when I try to do this by dragging the clips around, I can't do it. The main clip and the clips connected to it that I'm dragging around just end up going on the left or right side of the generator clip.
How can I do this? Is it possible? I noticed that if I delete all of the connected clips from the main clip, I can move the main clip above the generator clip and have it become a connected clip. But that presents a problem because I need all of the clips, and I've already gone to the trouble of syncing them.
I also noticed that I can take the main clip and its connected clips and turn them into a compound clip and then connect it, but that complicates the editing for me.
Thank you for any advice.

Well, as far as why I want a black generator, I'm using a split screen effect and I want to put some titles (text) on 1/2 or 1/3 of the screen. Maybe I don't need a generator to do that. I'm still learning all of this. I'm sure that if someone like you (someone with your experience) sat down and watched what I'm doing to achieve what I want, you'd have a million tips on how to do it better. But I guess that's stuff I'll just have to pick up as I go along.
I didn't know it was possible to put clips under the primary. That certainly helps.

Question about Software Updates in the Netherlands

Hello all,
! am new to the Netherlands and plan to buy the Lumia 1020. I have a question regarding FW updates over here:
Which network delivers the fastest updates generally or does the un-locked (country specific) phone get it first?
Also, if i choose to buy the phone on contract here, after the expiry of the contract, do i have to unlock the phone or will the provider do it for me? (Assuming that the phones are locked to the network in the first place, if not, please let me know!)
PS: I come from India, where we don't have phones on contracts and also receive updates very quickly!

hi mate,
generally if you want to free yourself from the constraints of networks, your best bet is to purchase an unlocked, unbranded handset from in-store or online. bear in mind that if you buy a handset from origin of another country in the EU, the warranty will still apply, but buy a 1020 that has a product code from outside the EU, then the warranty won't apply. something to be careful about.
as for operators delivering updates faster than others, this varies between updates, and really noone is able to predict this. as for the unlocking, that is between you and your network carrier, Nokia has nothing to do with this.

A question about fiting movie in the browser

Similar Messages

Maybe you are looking for