A question about gaming on the imac

So i just got a 17" imac (2.0ghz) version with the 1gb memory and radeon x1600, and i was wondering, if it will be able to work good with unreal tournament 2004, and also if it would possably work with Counter strike source if i downloaded boot camp. Thanks : ).
  Mac OS X (10.4.8)  

The Universal patch is for the full-game, not demo.
Here's some infor about the patch and link for the patch BTW...
http://www.macnn.com/articles/06/02/03/unreal.tournament.2004/
http://www.macgamefiles.com/detail.php?item=18155
I do not own the game, so I cannot comment on the widescreen thing, my games play fine on my 24" iMac. Are you looking to have the black bars on the top and bottom? I guess it would depend on the resolution you set in the settings.
If this helps, please award points accordingly. Thank you.
-Nick

Similar Messages

  • Question about setup_MITE in the PCI-MIO-16E-1

    I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

    National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
    natinst.public.daq.driver-development.general
    Christian
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

  • About to Buy The iMac (Stop Me?)

    I am about to buy the iMac, possibly today. I was wondering a couple of things.
    -Should I wait for 10.5 to come pre-installed on them?
    -How are they, work wise, look wise, function wise (for the owners)?

    *Hi CA..., Welcome* to Apple's Users Help Users Forums.
    *Francine Schweider* a |||| bar poster in these forums has what I think is an excellent thought.
    "I plan to buy my next computer before Leopard comes out. Why? Because generally new Mac computers will not run any system older than the one they ship with, I want to be able to use the fully mature Tiger system, rather than having to rely entirely on Leopard. Who knows whether the software I own will be fully compatible with Leopard? Or how long it will take for developers (think Adobe) to update if there are incompatibilities with Leopard. Or even just how stable and reliable and all like that Leopard will be.
    Francine"
    Enjoy your new Mac, JP
    *The specifics:*
    http://www.apple.com/macosx/uptodate/
    Enjoy

  • Another BW question about filter in the query definition

    Hi ,
    I have another question about filter in the query definition.
    <u>Question:</u>
    Which of the following objects can be filtered in the query definition?
    A. characteristic
    B. Key figure
    C. Structure
    D. Units
    E. Hierarchy
    My answer is A,B,D,E.
    The answer in the book is A,B,D
    Can anybody tell me which one is wrong?
    Thanks in advance,
    Liu Jia

    HI
    1.The answer could be A,B,D.you can not apply filters on hierarchies
    2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
    sri

  • A question about some of the features

    I have Vista so therefore am unable to use the trial version of photoshop elements. Before I go ahead and purchase the software, I had a few questions about its features.
    I'll mainly be using photoshop to create digital scrapbooks. I know that photoshop comes equipped with themes and images, but I would like to know if I can use my own backgrounds and images. If I am able to use my own backgrounds, can they tile?
    Another thing I would like to know is if I can create my own projects with custom dimensions.
    Lastly, I'll be using photoshop to sprite. Is elements well suited for spriting? More specifically, does it have a color selection/replacement tool?

    I use PSE for digital scrapbooking. Instead of using the "built in"
    creations and albums, just create your own PSD files with layers of
    whatever images/embellishments/background papers you want. You can
    specify whatever size of creation you want when you create your PSD file
    (you only have the choice of certain sizes when you use the built in
    stuff).
    Not sure about what you mean about making your backgrounds tile, but I
    think it is possible. You can take a "background" paper, do a selection,
    and then define a pattern and fill it. Or, if you mean layer your
    background papers - yes you can do that too. (Here is my online
    scrapbook pages, all of which were done in PSE 4 or 5:
    http://www.scrappersguide.com/forums/gallery/showgallery.php?cat=500&ppuser=413)
    You can select by color (using the magic wand tool) and you can replace
    color, but it may not work exactly as you expect. (I also don't know
    what spriting is.) But, many people just use a hue/saturation adjustment
    layer to change colors.
    -Trish

  • M2tv -- questions about watching tv on iMac

    Firstly, I'm sorry if this is the wrong forum. I looked and this seems closest to my question.
    I'm an American in Japan and reading Japanese is still a bit difficult. I wanted to watch TV with my iMac and so this past weekend I bought m2TV which is an external USB device that plugs into my TV antenna, no antenna, no TV. Reception is pretty good but sometimes I can't get all channels and I'm thinking there must be another way.
    I was wondering if I bought a tuner in/from America, if that tuner would work in Japan and what tuners people recommend.
    Cheers,

    the iMac doesn't have an HDMI port per se, but there are MDP-to-HDMI adapters.
    what might be the problem with that digirecorder is the lack of a Mac driver, though.
    instead, check out [Elgato's|http://www.elgato.com/elgato/int/mainmenu/products/tuner.en.html] hard and software.
    JGG

  • Question about using my 24" Imac as a tv (slingbox, eyetv etc..)

    Hi guys I want to get rid of my tube tv in my room and use my imac as my tv/computer....I have a digital cable box (comcast) which only has component outputs (blue,red,gree,white,red) which is a no-go for El Gato products i think...Which is the best solution for me. Also is it possible to get HD on my imac without using an antenna since i can get it through my cable box for like 5 bucks a month.....Also if i get slingbox do I need a tv for it to work or can i just simply hook it up to my cable box and not the tv also since I want to get rid of the tv and just use the imac....Thanks guys

    ...which only has component outputs (blue,red,gree,white,red) which is a no-go for El Gato products i think...
    Not so, both the EyeTV Hybrid and EyeTV 250 Plus can handle component video.
    Also is it possible to get HD on my imac without using an antenna since i can get it through my cable box for like 5 bucks a month...
    Why wouldn't you use the same connection from your cable box as above?
    Also if i get slingbox do I need a tv for it to work...
    No

  • Question about Mountain Lion on iMac 27

    I recentely installed Mountain Lion on my iMac, and after the computer restarted and everything.  When I click on an icon, it doesn't go into the program or the apple menu too.  What can I do to solve this problem?

    That is checked (of course); however, I just actually tried the wireless mouse that came with the iMac and that works using a click - it does not work with my wired third party (Macally) USB mouse which is what I use (I do not care for the "un"ergonomically shaped Apple rodent). And it used to work with my Macally mouse, so something was definitely changed with the Lion release. I actually sent in a bug report for "loss of functionality" - didn't get me anywhere, LOL.

  • TS1367 I am asking this question about my 27 inch iMac Desktop Computer. I normally use my Laptop and very seldom use the desktop but was going to download the new software earlier today. I could not wake it from sleep.

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

    The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in  the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
    Jean

  • [EWS][FastTransfer][MS-OXCFXICS] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

    Hi, all.
    First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
    So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
    I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
    1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
    2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
    3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
    internal enum FxOpcodes
    None = 0,
    Config = 1,
    TransferBuffer = 2,
    IsInterfaceOk = 3,
    TellPartnerVersion = 4,
    StartMdbEventsImport = 11,
    FinishMdbEventsImport = 12,
    AddMdbEvents = 13,
    SetWatermarks = 14,
    SetReceiveFolder = 15,
    SetPerUser = 0x10,
    SetProps = 0x11
    and in the stream there are 4 part(after I parse the stream):
    A. OpCode:Config, value:0000000001000000
    B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
    C. OpCode:TellPartnerVersion, value:000F91838417
    D and follows is: OpCode:TransferBuffer, Count:31680
    So 
    a. What is the OpCode:Config value meaning?
    b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
    Thanks in advance for any ideas.

    Hi Haiyang,
    Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
    The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
    a later time.
    You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
    if your project justifies it. You can send the description directly to me.
    Thanks, Vilmos

  • [EWS][FastTransfer] Question about paging in the Fast Transfer Stream after exporting message and the meaning of the config in the previous section of the stream.

    Hi, all.
    First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
    So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
    I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
    1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
    2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
    3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
    internal enum FxOpcodes
    None = 0,
    Config = 1,
    TransferBuffer = 2,
    IsInterfaceOk = 3,
    TellPartnerVersion = 4,
    StartMdbEventsImport = 11,
    FinishMdbEventsImport = 12,
    AddMdbEvents = 13,
    SetWatermarks = 14,
    SetReceiveFolder = 15,
    SetPerUser = 0x10,
    SetProps = 0x11
    and in the stream there are 4 part(after I parse the stream):
    A. OpCode:Config, value:0000000001000000
    B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
    C. OpCode:TellPartnerVersion, value:000F91838417
    D and follows is: OpCode:TransferBuffer, Count:31680
    So 
    a. What is the OpCode:Config value meaning?
    b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
    Thanks in advance for any ideas.

    OK. Thank you.
    Today I build a stream with a paging rule as below:
    1. Keep each page's byte length is 31680.
    2. Make sure a complete property value in a page except binary type property whose value length is larger
    than 31680.
    And it can work very well when import the stream to the folder by EWS.

  • Question about shutting down the middle tier while leaving the DB up

    Hi,
    We just successfully upgraded 11.5.10.2 from running on 9.2.0.8 SOLARIS SPARC 32-bit to 11.2.0.1 SOLARIS SPARC 64-bit.
    I am in the process of rewriting the backup scripts. We used to do a once-a-week backup (zip) of the middle tier directories,
    after shutting down EVERYTHING cold (MT first, then DB listener, the DB). Our DB consultant likes hot-only backups of the
    DB so we are going to keep the DB running all the time and always do hot backups from the DB, but keep MT cold backup.
    We want to keep our MT cold backup so we retain our downtime window that users expect (Saturday night - Sun morning).
    So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up?
    When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?
    In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
    "for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
    some confirmation.
    MH
    One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
    We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
    with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
    everything --very rarely.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi,
    So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up? There should be no issues.
    When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?Correct.
    In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
    "for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
    some confirmation.You still need to wait for sometime for the CM to shutdown, that's all.
    One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
    We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
    with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
    everything --very rarely.You should be OK with your approach.
    Thanks,
    Hussein

  • Why can't someone from apple answer my question about upgrading to the current version of Itunes

    I am amazed that I have been posting questions for months about this issue and no one has given me an answer!!!!  Does Apple not track these discussions?
    I have Windows 7 64-bit and am trying to upgrade Itunes to the current version, with no suggestions.
    I have found and tried the 64-bit installer and receive the following message:
      'This itunes installed is intended for 32-bit versions of Windows. Please download and install 64-bit Itunes installer instead.'
    I have itunes 9.1.1.12 currently installed.

    Okay ... it's behaving just like the PC Mover thing. 32-bit versions of iTunes and AMDS have somehow been jammed on the PC. When you go to uninstall either of them, the 64-bit Windows installer service encounters 32-bit installation configuration information, goes into a fantod, and you get the error message.
    So we'd better try clearing away that installation configuration information, and then trying another update.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
    Next, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • A few questions about my late 2006 iMac

    Hello,
    I own a late 2006 iMac specs here: http://support.apple.com/kb/SP28
    Our house basement got flooded by our neighbours 50,000 litre pool splitting open.
    My iMac was on a desk along with the cords and did not touch water. It was however in a room that was flooding for maybe 6 hours. It was exposed to the humidity from the water on the floor and also big fans were going during that time (dehumidifier and fans). I grabbed it maybe 5 or 6 hours this happened and brought it upstairs in our living room. The keyboard doesn't sit flat and my comptuer in general seemed slow and apps weren't working right.
    Could it be damaged because of all of this? I'd like to open the back panel and pop off the keys on the keyboard. How can I find information about how to pull the back off and pop off the keys?
    Our insurance provides full coverage so may just tell them to check out my iMac but then I'll be without it for awhile.

    I ended up getting a new Mac.

  • General questions about subscriptions in the context of application exports

    Hello,
    I have two sample applications (Apex 4.0.2), a "master" one and a "subscribed" one, which has a page template subscribed to a page template in the master app.
    Looking at their export files, I see:
    - Master app:
    -- This is the master template
    wwv_flow_api.create_template(
      p_id=> 32173830131265449 + wwv_flow_api.g_id_offset,
      p_flow_id=> wwv_flow.g_flow_id,
      p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',- Subscribed app
    -- This is the subscribed template
    wwv_flow_api.create_template(
      p_id=> 19843209078190645 + wwv_flow_api.g_id_offset,
      p_flow_id=> wwv_flow.g_flow_id,
      p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',
      p_reference_id=> 32173830131265449,
      p_translate_this_template => 'N',
      p_template_comment => '');
    end;A couple questions to help me understand how things work behind the scenes:
    - Just out of interest, in the subscribed app export shouldn't it be p_reference_id=> 32173830131265449 + wwv_flow_api.g_id_offset to keep things in sync?
    - If I export both applications from my workspace, delete them and re-import them (first the master, then the subscribed) the subscription remains valid. On the other hand, if I import them into apex.oracle.com, the subscription is lost. Is this the way it should be? Is there a way to keep the subscription?
    Thanks
    Luis

    Hi Moni,
    In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
    /wojciech
    > Hi,
    > When we use Business system, there will be
    > corresponding Technical System, and associated
    > Products and SWCV. So it is very clear Where to
    > declare my SWCV in SLD. And no confusion  about
    >  transporting SLD objects.
    > But with Business service, It is not declared in
    > SLD, So there is no related Technical System, no
    > product. But I need to define SWCV so that i can
    > import in to repository to define my design
    >  objects(DT,MT,MM etc).
    > Here are my questions.
    >  1. In which Product i need to define the SWCV?
    it doesn't matter
    > 2. Do i have to have a product associated with every
    > SWCV?
    actually all swcv should be in some product
    > 3. Do i have to have a Technical system when i use
    >  Business service?
    no
    > 4. How do I transport SWCVs from dev SLD to TEST SLD,
    > without Technical system and Business System?
    I don't know.
    > 5.Do i need to transport the SWCVs from dev SLD to
    > test SLD as it working fine without doing SLD
    > transport?
    >
    In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
    > Thankx
    > Moni
    <i>** Please reward points if found it useful **</i>

Maybe you are looking for