A question about headphones of 8800

Is the sound come out from the right headphones ostiole always louder than the left? Mine does.

I had gone to custmer service centre to check it. I requested to compare with a new 8800 phone. I found the new one was just like mine. Left ostiole's sound is lower. And I also found 5300's left is louder.
I asked the question is for confirmation.
Please make a call and put the two corners in your ear early or late. That would be clearer. Thanks

Similar Messages

Worth buying the Xperia Z3 Compact ? And a question about headphones.

Worth buying the Xperia Z3 Compact, compared to Xperia Z3?
And a doubt. I have had other Xperias, and headphones from other brands did not work well with him, this ''Z3 line'' is yet? It only works with Sony headphones?
Thank You!

Well, the headphone jack is designed to be compatible with Noise Cancelling headphones from Sony, that uses 5 pins in the pole, however, a regular 3 segments headphones should work without issues... the problem is if you try to use incompatible Headsets (the ones with microphones) since the use an additional segment and it my be located in a different way than what Sony uses.
My advice is, if you are not the most hardcore audiophile, that you get a medium range Bluetooth Headphones. Those will be compatible with your phone...
I have had Altec Lansing BackBeat 906, 903... Plantronics BackBeat 903+, and currently use the BackBeat Go2.
Out of those the Go2 are the best sounding headphones for me (I do not care for tons of bass, so the amount of bass with those is very good)... but the battery is bad, around 3.5 hours. The fit is good, people complain when trying to use as advertised, but I actually found a better way to place them, making a loop around and front of my ears...... Price ~70$
All previous ones had a battery of 7 hours, but the rubber material of the piece around your ear hardens with time and breaks (after a couple of years of use)... the Go2 seems to be better built.
Finally I would recommend to you the Jaybirds Bluebuds X if you are willing to pay 140~160 $.... with excellent battery life, and sound quality.
If you want to go cheaper... Sony's SBH line has plenty of option with good reviews... SBH20 being the cheapest
And if you want to go crazy expensive, Parrot Zik are over 400$ but apparently they are the best all around. I tried them once.

Questions about Digital Wireless Headphones CB2

Hi everyone,
I have a question about the [url="http://nl.europe.creative.com/products/product.asp?category=437&subcategory=438&product=6 44" target=_self>Digital Wireless Headphones CB2530[/url] I've never seen it in a shop here in Holland, so I thought I'll pose my questions here.
I'm interested in buying one for my Creative Zen Xtra MP3 player.
My questions are:
- if it's possible to connect it to the player?
- can I use it while traveling (can i hear something if I put the player in my bag)?
- is it a good idea to buy this headphone? (i already have a great headphone by Philips, but am looking for wireless)
I also have a question concerning a remote control. Is there one for the Creative Zen Xtra?
I hope so...
Thanks in advance.
Greetings,
Eline

Eline,
Yes, you can connect the wireless headphone to the player. Infact you can connect it to any stereo devices with the audio transmitter as long it's using a 3.5mm minijack. It shouldn't be a problem for the audio even if the player is inside the bag. It works about the same way as a mobilephone to a Bluetooth headset. Unfortunately, the Zen Xtra player does not support remote control feature.
Jason

Question about the Headphone Jacks on the DDTS-100

This is probably a strange question, but I am goona ask anyway...
Anyone know whether the headphone jacks on the DDTS-100 gets Dolby Digital, Dolby Digital Pro Logic II? I know it supports it for speakers, but I am unsure about headphones.
I am considering buying this with Medusa 5.1 Headphones, and I am trying to figure out whether the Dolby Pro Logic II would work with those.
From what I understand regular 5.1 Headphones do not use the 5 channels unless it is a 5 channel source like a DVD. What I am thinking is that the Dolby Pro Logic II on the decoder might solve that?
Would this work?
Thanks for your time!

Thank you both very much for your help!
Yes, I was considering pluging it in exactly as ya just mentioned connecting the headphones via the speaker ports, since the Medusa Headphones do have the same plugs as the 5.1 speakers.
Soo, that might work then? Cool! ty
Now that I look at it, the headphones instructions on the cords on the net mentions pluging it in exactly like that.
Thanks again!,
MMPD
http://www.livingtorrents.com

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Few questions about mac pro before buying

Hello all!
I may be buying a mac pro in a month or so and have a few questions about it.
1. ) Any one know when Apple may release the latest mac pro? Don't wanna buy some thing that'll be significantly obsolete in a few days
2. ) Is it possible to use SATA optical drives internally? I have a SATA blu ray drive I'd like to take from my PC, if that's possible.
3. ) Is it possible to get a graphics cards better than the 8800 GT for video games? (For use in OS X)
4. ) Finally, is there a significant performance difference between Apple's seemingly super expensive RAM and 3rd party RAM? (Other than the heat syncs)
Thanks for any replies.

1. We have no idea when Apple will release any product until it's released. This is a user-to-user site so we have no more information about future products than you do.
2. Yes, it's possible. There are two additional SATA ports on the motherboard.
3. The only graphic cards are those provided by Apple when you order the computer as well as the non-Apple supplied ATI HD-3870 Mac/PC card. The 8800 and 3870 have close performance specs. You can find some benchmarks at Bare Feats.
4. There's no difference between the RAM Apple installs and what you can purchase on the open market. As long as the RAM meets the required specifications and has the requisite heat sink it will work just fine.

Questions about Audigy 2 ZS connecti

Hello,
New to these forums, so bear with me. I'm considering purchasing an Audigy 2 ZS gamer card, and have some questions about the card and speaker setup. I've read the FAQ's in the forum, and they have been a big help, but I still have questions related specifically to my setup. Here's the system specs:
AMD Athlon 64 3000+
Asus K8V SE Deluxe
VisionTek Radeon X800 XT PE
Seagate 250 gig SATA HDD
gig Crucial ram
Antec P80 case
Antec TruePower 430 ps
Altec Lansing ADA885 digital speakers (awesome sound)
Altec Lansing headset (cheap but works for voice and gaming)
ADI AD980 onboard sound
Windows XP Home
. I currently am able to run both the speakers and headset at the same time by using the front panel audio outlets on the case (helps with the immersion in IL2 946). I would like to continue doing this(using front panel audio) with the new card. I've found several places that have an adapter cable for sale, http://www.x-tap.com/
http://www.performance-pcs.com/catal...oducts_id=2700
http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english_add,U={B8F6030-DA4F-D3-94F4-00500463020E},Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},d=3025443648,VARSET=ws:http://us.creative.com,case=5764
The plug that I have has only 3 separators, not 4. Will this work with the Audigy 2? I don't have a link for this plug, unfortunately.
4. I had been considering purchasing? a set of USB headphones, but I've been told that when you plug them in, the sound is cut off for the speakers. If there was a workaround for this, I might consider getting them. Then I wouldn't have to use the front panel audio or the connections on the card.
5. I've heard of an issue with this particular set of speakers and the Audigy 2 card, particularly that the speakers were originally designed for a Dell system, and the wiring was phased differently than in other systems. Is this something to be concerned with, and if so, is there a workaround?
I like to research a particular product before I buy it, in order to make an informed decision and avoid problems if possible. Sometimes it works, sometimes it don't
Thanks in advance for the help.
Message Edited by mrj_455 on 03-05-2008 05:28 PMMessage Edited by mrj_455 on 03-05-2008 05:32 PM

The inputs are easy to find and select:?
Right-click the Mixer icon on the taskbar and select "Playback Devices".<
There should open a new Window with the options of "Speakers" and "SPDIF"<
With Speakers highlighted click the?"Properties" button on the lower?right corner<
Go to the 4th tab (I believe it is "volume" in english, "Pegel" in german)<
There you have your inputs!<
Unmute Line-In and set its volume according to your desires.<
Also remember that software designed for XP, that should control the Line-IN settings, (ie. Hauppauge WinTV or Dscaler) will be unable to do so in Vista, do to the architecture change. You can however enable "Compatibility Mode for Windows XP SP2" for these applications (right-click on their executable) and restore control of the inputs directly from the program. (You should however unmute it first as explained above). PS:? All Creative Software that came on the CD is incompatible to Vista. Only the included Audio Console should work as expected.Message Edited by alexs3d2 on 05-07-200707:3 PM

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

A question about headphones of 8800

Similar Messages

Maybe you are looking for