A question about ordering 32-bit Test drive DVDs on SAP Knowledge Shop

Dear all,
I ordered the following DVDs on the SAP Knowledge Shop website:
- SAP NW2004s Testdrive Linux DB2 PPC
- SAP NW2004s Testdrive MaxDB
And it seems that the first one works with 32-bit linux.
Because, this is the first time that I order something on this site, there is something that I didn't fully understand. Apparently
the DVDs are free. However there will be a shipping cost, which for me will be 15 Euros (I'm living in France). But when I completed the order form with my name, address, email, etc. there was no field for credit card number (for the shipping payment). I just received an order number and that's all. So finally how should I pay for the articles shipping?
Thanks in advance,
Dariyoosh

try a power manager reset.
read this apple doc:
http://support.apple.com/kb/HT3964

Similar Messages

Question about Order Online / Delivery

Hi everyone,
I am thinking about order a MBP online. But there has one thing which i worry about. Sorry about that if you think that question is stupid, but it is my first time to order something so expensive on the internet, so i am a bit worry
Because I am a student and I live on my own.
What will happen if the delivery is arrived, but I am not at home?
P.S I live in England
Thanks a lot

Hi,
My MBP has been scheduled for delivery today. I have taken the day off work for the delivery. I have just heared that it is going to be delivered tonight around 8pm. It seems that TNT have a policy that they do not deliver certain items during the working week as people are not at home. This may sound very good if you have not taken a day off to take delivery. Quite frankly I am a bit hacked off as I would like to use the machine for a job tomorrow and now will have to stay up late doing updates etc.
Regarding delivery: I'm sure this is a reasonable policy, I would just have liked them to tell me yesterday ( when I phoned up) that delivery would not be until tonight so I could have gone out and earned some money today!!!
Don't worry...you will get your machine!!
Mark

Question about "Power On Start Test"

Hi... I have owned TWO MacBook Pro's, one built back in 2006 and a newer one built in 2009 (both 17 inch)... On either one of them, on say about every 20th or so "pressing of the power key" to start the machine, rather than hearing the mac startup chime and see the screen light up within a few seconds, instead there is no chime and the screen stays black for a long time, maybe up to 30 seconds... Then the chime sounds and the screen comes to life.
If it's quiet in the room when this event (or non-event) happens I can usually hear the quiet sounds you hear when the machine is starting, a bit of clicking and perhaps the sound of the hard drive starting up (??, never been sure what those sounds are other than to say they are "normal"). But you don't hear the chime and nor does the screen light up until some time significantly later...
It's been my belief though not my knowledge that when this happens, again maybe one in every 20 or so starts, that it is the Power on Start Test that is, for some reason, not completing quickly but instead taking some time for whatever reason... If I'm patient, eventually, like in maybe up to 30 seconds, I then hear the chime and away it goes...
Again, this occurs on not one but two different MacBook Pro's and it's done it on both of them at what I would guess would be this same 5% rate since both were new... And over all versions of operating systems that those two machines have seen... So it does NOT appear to be anything tied to something faulty in the individual computer unless I just go so unlucky as to buy two machines 3 years apart that both came with the same problem (unlikely)... I also have an older G4 desktop at home and I have a G5 desktop at work... I've never noticed this on either of those machines so this would perhaps appear to be laptop related????
But as I peruse around and look for other folks who describe such an issue, I don't find much... So, I decided to post this question...
Can anyone offer insight into what might be going on??? Is it a problem??? Might it be hardware, software, what??? Any feedback would be much appreciated...
thanks... bob..

try a power manager reset.
read this apple doc:
http://support.apple.com/kb/HT3964

Follow up question about interpreting smart data test on 160GB classic

I posted this question regarding the problem I am having with my 160GB ipod classic:
http://discussions.apple.com/thread.jspa?threadID=2153948&tstart=0
It appears noone is able to help me, so I have found some more information:
In short, itunes will not write to my 160GB ipod once it reaches about 35GB / 160. Windows will write to it, but only at 500KB/sec rather than the usual 19+Mb/sec. It just crawls once it hits that point. After following some advice online I came up with the following results using the HD tests in diagnostic mode.
smart data test:
retracts: 138
rallocs: 563
pending sector: 55
poweron hours: 1016
starts/stops: 267
temp: current 26C
temp: min 19C
temp: max 53C
and for the HDD spec test:
sno: (not sure if i should post a serial number?)
FW Revision: NB100-05
LBAs: 0x12a19eb0
These are the only tests that show up under the I/O HardDrive section. Should there be more? It seems like there might be from what I read, but I am not sure.
Anyway, any help interpreting these results would be greatly appreciated.

adame wrote:
rallocs: 563
pending sector: 55
etc.
Your drive is probably toast. Compare your SmartData stats with mine:
Retracts: 844
*Reallocs: 12*
*Pending Sectors: 0*
PowerOn Hours: 2037
Starts/Stops: 830
Temp: Current 29c
Temp: Min 10c
Temp: Max 50C
I've only 12 remapped sectors and none pending. From the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
I'm sure you'll find the counts go up if you try to do a surface scanning disk check. Sorry it's not better news but at least you know where the problem lies. Assuming your iPod is out of warranty it's probably time to get your iPod refurbished with a new drive or to buy a new iPod.
tt2

A few questions about setting up a network drive

Hello,
I have been trying setup a private server on my home network. I have a Netgear WNDR 3800 and have been trying to hook up my 2TB external drive to the router.
I have been trying to decide how I want to format the drive, and how many partitions I should use.
The reason I have a 2TB drive is because I needed a work space to create a image of a corrupt 500GB drive. The 500GB drive had my entire digital life on it, and it was almost lost. I dont want to encounter the same issue with a 2TB drive because at that point I feel like any issues would make it difficult for me to recover the data due to work space size issues. This is why I am thinking about using several partitions, but I am not sure what issues this might present.
As far as format goes; the router says it supports read/write with FAT 16/32, NTFS, EXT 2/3, and I know it works with HFS. Here are the things that I am trying to do with the drive. (in order of importance)
Use it as a Time Machine backup location for 1 possible more MBP's
As a media sever to stream downloaded movies and music to A/V reciever (Pioneer VSX-822) and possibly other devices on the network
Act as a temporary storage location to swap files between devices or operating systems
If possible not keep media on my computer and stream it from the network drive when I am home
And, thats all I can think of right now. If there is something else useful I am missing that would need special attention in setting up a network drive let me know.
So, I have had no problems getting the drive to connect and show up on the network when I use HFS. I have also been able to get multiple partitions to show up; been able to back up to different partitions; including time machine on one partition.
So here is where I am running into problems; the router bios allows you to enable a media sever. I believe the router tries to do something with DLNA. DLNA I believe allows for a similar functions to airplay and cloud for basically all compatible non apple products. I dont care if I use DLNA, or Airplay. I just want to be able to access my music library over the network without having to have my computer open, or my iphone on me..ect.
So I was wondering if anyone could help me out, or if there are any articles I should look at that I might have missed while I have been researching.
Edit: I am sorry if this is posted in the wrong section, I figured the best people to ask about filesystem compatability and ease of use was going to be the System software section

Hello,
I have been trying setup a private server on my home network. I have a Netgear WNDR 3800 and have been trying to hook up my 2TB external drive to the router.
I have been trying to decide how I want to format the drive, and how many partitions I should use.
The reason I have a 2TB drive is because I needed a work space to create a image of a corrupt 500GB drive. The 500GB drive had my entire digital life on it, and it was almost lost. I dont want to encounter the same issue with a 2TB drive because at that point I feel like any issues would make it difficult for me to recover the data due to work space size issues. This is why I am thinking about using several partitions, but I am not sure what issues this might present.
As far as format goes; the router says it supports read/write with FAT 16/32, NTFS, EXT 2/3, and I know it works with HFS. Here are the things that I am trying to do with the drive. (in order of importance)
Use it as a Time Machine backup location for 1 possible more MBP's
As a media sever to stream downloaded movies and music to A/V reciever (Pioneer VSX-822) and possibly other devices on the network
Act as a temporary storage location to swap files between devices or operating systems
If possible not keep media on my computer and stream it from the network drive when I am home
And, thats all I can think of right now. If there is something else useful I am missing that would need special attention in setting up a network drive let me know.
So, I have had no problems getting the drive to connect and show up on the network when I use HFS. I have also been able to get multiple partitions to show up; been able to back up to different partitions; including time machine on one partition.
So here is where I am running into problems; the router bios allows you to enable a media sever. I believe the router tries to do something with DLNA. DLNA I believe allows for a similar functions to airplay and cloud for basically all compatible non apple products. I dont care if I use DLNA, or Airplay. I just want to be able to access my music library over the network without having to have my computer open, or my iphone on me..ect.
So I was wondering if anyone could help me out, or if there are any articles I should look at that I might have missed while I have been researching.
Edit: I am sorry if this is posted in the wrong section, I figured the best people to ask about filesystem compatability and ease of use was going to be the System software section

[SOLVED] Question About Downgrading to a Spinning Drive from SSD

I currently have a laptop with an SSD and Arch Linux, and it's aligned specifically for SSD and configured as such. I ordered a brand new laptop, and decided that I will move the SSD from my current laptop to my new one, and put a spinning drive in my current laptop. I was thinking about using Clonezilla to clone my current Arch install on my current laptop SSD to a spinning drive (since I can't afford another SSD right now). However, since my current laptop installation is aligned for an SSD, will that cause problems if I clone it to a spinning drive? My spare spinning hard drives were made before the 4k transition, I believe. I would be putting it on an older 500GB Seagate. I'd rather not start over with a new configuration if I don't have to.
Last edited by jlacroix (2012-02-14 03:04:10)

graysky wrote:No need... Partition the new drive and just.use raync to transfer. Clonezilla is overkill IMO.
The thing is, I'm very familiar with Clonezilla, I use it quite often. I'm not familiar with raync.
alphaniner wrote:
Sounds like a good oppurtunity to switch to LVM!
But, like graysky said, there's nothing to worry about. The only way you would run into problems is if you tried to use dd.
I think that's what Clonezilla uses, isn't it?

Question about order by and rownum and subqueries.

Can you explain why test 4 below results as it results- with returning no rows?
Identificator "PKG_INTRA_CUSTOMER_SEARCH.NAME" is a package function, which returns value from a variable declared in package body, the function returns value 'e%'.
Please note that tests 1-3 all returned data, but test 4 didn't. Why? My porpouse is that test 4 would also return data.
1. Query without "rownum" and with "Order by" returns 2 records:
select q.*--, rownum
            ,PKG_INTRA_CUSTOMER_SEARCH.NAME
         from
            select c.ID,
               c.NAME,
               c.CODE
            from V_CUSTOMER c
            where 1=1 and lower(c.NAME) like PKG_INTRA_CUSTOMER_SEARCH.NAME
            order by c.NAME, c.ID
            ) q
10020     Ees Nimi     37810010237     e%
10040     ewewrwe werwerwer          e%2. Query with "rownum" and without "Order by" returns 2 records:
select q.*, rownum
            ,PKG_INTRA_CUSTOMER_SEARCH.NAME
         from
            select c.ID,
               c.NAME,
               c.CODE
            from V_CUSTOMER c
            where 1=1 and lower(c.NAME) like PKG_INTRA_CUSTOMER_SEARCH.NAME
            --order by c.NAME, c.ID
            ) q
10020     Ees Nimi     37810010237     e%
10040     ewewrwe werwerwer          e%3.Query without "rownum" and with "Order by" returns 2 records:
select q.*--, rownum
            ,PKG_INTRA_CUSTOMER_SEARCH.NAME
         from
            select c.ID,
               c.NAME,
               c.CODE
            from V_CUSTOMER c
            where 1=1 and lower(c.NAME) like PKG_INTRA_CUSTOMER_SEARCH.NAME
            order by c.NAME, c.ID
            ) q
10020     Ees Nimi     37810010237     e%
10040     ewewrwe werwerwer          e% 4. Query with "rownum" and with "Order by" returns 0 records:
select q.*, rownum
            ,PKG_INTRA_CUSTOMER_SEARCH.NAME
         from
            select c.ID,
               c.NAME,
               c.CODE
            from V_CUSTOMER c
            where 1=1 and lower(c.NAME) like PKG_INTRA_CUSTOMER_SEARCH.NAME
            order by c.NAME, c.ID
            ) q

Hi,
please reproduce the question in your test database with script below.
My general question is that wht Test5 below returns only 1 row, but Test5 returns 3 rows.
The difference between those two tests is only that one has "order by" clause, the other doesn't have.
I need the "order by" clause to stay, but seems like it is not allowed.
CREATE OR REPLACE
PACKAGE PACKAGE1 AS
function NAME return varchar2;
END PACKAGE1;
CREATE OR REPLACE
PACKAGE body PACKAGE1 AS
function NAME return varchar2
is
begin
   return 'e%';
end NAME;
END PACKAGE1;
select PACKAGE1.name from dual--e%
create table Tbl AS
   (SELECT 'e2b' Col1, 'A' Col2, 'AA' Col3 FROM dual
   UNION
   SELECT 'e3b', 'B','BB' FROM dual
--Test5:
select q.*, rownum pos, PACKAGE1.name f
         from
            select c.col1,
               c.col2,
               c.col3
            from Tbl c
            where 1=1 and lower(c.col1) like PACKAGE1.name
            order by c.col2, c.col1
            ) q
            union all
         select '111' , '111' , '111' , 0 pos, PACKAGE1.name f from dual   --return 1 row
--Test6
select q.*, rownum pos, PACKAGE1.name f
         from
            select c.col1,
               c.col2,
               c.col3
            from Tbl c
            where 1=1 and lower(c.col1) like PACKAGE1.name
            --order by c.col2, c.col1
            ) q
            union all
         select '111' , '111' , '111' , 0 pos, PACKAGE1.name f from dual   --return 3 rowsEdited by: CharlesRoos on Feb 17, 2010 5:30 AM

Question about the Before/After/Test metadata tags

i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
thus far, i have not done any unit tests that require a component to be added to the display list. i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
[Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
what do those do and when/why do i need to use them?
thanks
additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
package HM.FO.User {
import mx.controls.Button;
import mx.events.FlexEvent;
import org.flexunit.Assert;
import org.flexunit.async.Async;
import org.fluint.uiImpersonation.UIImpersonator;
public class UserWindowPresenterTest {
//protected var window:UserWindow;
protected var button:Button;
[Before( async, ui )] public function setUp():void {
//this.window = new UserWindow();
this.button = new Button();
//Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
//UIImpersonator.addChild( this.window );
UIImpersonator.addChild( this.button );
[Before( async, ui )] public function tearDown():void {
//UIImpersonator.removeChild( this.window );
//this.window = null;
UIImpersonator.removeChild( this.button );
this.button = null;
[Test( async, ui )] public function on_user_saved_clears_password_fields():void {
// this.window.pass_txt.text = "foo";
// this.window.pass_confirm_text.text = "bar";
// var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
// presenter.on_user_saved( null );
// Assert.assertNull( this.window.pass_txt.text );
// Assert.assertNull( this.window.pass_confirm_text.text );
Assert.assertTrue( true );

Okay, so the async modified is used to indicate that the asynchronous statement will be used.
There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
If I copy your code directly from below and paste it in my environment it passes.
Mike

Question about the function module testing function

Dear everyone
I am trying to use the testing function of a function module in order to understand how the following
function module works.
<Function module>
BAPI_SALESORDER_CREATEFROMDAT2 --> This function module is to create a sales order
I input several data in the test function, and I was the successful result with some sales order number.
However, this sales order is not actually registered in the system.
Would it be possible to run the function module (in the test mode), so that it would actually
register those documents (ex. sales orders) in the system.
I would like to see the actual sales orders to understand how the function module works.
Thank you very much in advance
Takashi

Dear everyone
※Sorry, my initial message was hard to understand. So I will write it again.
I am trying to use the testing function of a function module in order to understand how the following
function module works.
<Function module>
BAPI_SALESORDER_CREATEFROMDAT2 --> This function module is used to create a sales order
I input several data in the test function, and I've got the successful result with some sales order number.
However, this sales order is not actually registered in the system.
Would it be possible to run the function module (in the test mode), so that it would actually
register those documents (ex. sales orders) in the system?
I would like to see the actual sales orders to understand how this function module works.
Thank you very much in advance
Takashi

Can Anyone help I have a question about ordering items from iphoto

HI,
My question is .... Ive just moved from Australia to London & I am unable to order items Ive made in iphoto & have them sent to London.
Previousely ,living in AustraliaI had no problem & Ive ordered items from iphoto that Ive created here in Lonond & had them sent back to Australia no problem.
But I just cannot create here in London & then have them sent here,even if I change the credit card details ....
Does anyone know how to tackle this ?
Regards
Lyndajane28

Thank you LarryHN, you are a superstar... Ive been struggling with this for a while now & you have solved my problem ..Thank you Thank you Thank you
Regards
Lyndajane28

Question about the New X-Fi Driver that is o

Just wondering if anyone else has this come up, when I download the new driver for the X-Fi, and start the installation process, it ends up saying that my "Audio Consol" is the same version and that if I choose to install, that my current version will be uninstalled and then overwritten. Should I proceed anyways? Should I stick with the new driver? Granted I dont have any problems, but it says its a "Critical" download, and would hate to not get the current driver.
Thanks for any help.

You shouldn't be afraid to uninstall the Audio Console. It is standard procedure to first uninstall previous installation and then proceed with the installation, in order to avoid conflicts. It is a good thing that Creative implements it in the installation routine. So simply press to proceed and don't be afraid. You may lose the selections you made, because the new installation will put on the defauls but you can always reselect. THX Console and Speaker Calibrator is not affected, as far as i know.
Message Edited by alexs3d2 on 08-24-2005 09:36 AM

Questions about ordering a phone from the site.

I've never ordered a phone online before, or even from Best Buy for that matter. So I'm confused about a couple things. How does it work? Do they just send me the phone and I have to deactivate my old one?
Also, I noticed the Droid Incredible 2 is listed at $0.00. I know you need to get a $30 data plan, which is okay since I'm overdue for a renewal anyways. But, I'm confused about the plan part. I'm part of a family plan, so if I selected the option to not change it (Which shows up as $0.00 still) Does it tack on the $30 data plan for my phone? Or do I need to select the $30 option?

When you receive the phone, there will be simple instructions inside on how to activate it.
As for the plan, I'm not sure why the website would indicate you can keep your same plan, but if you do not have a data plan you will be required to add the 2GB for $30 option. It is impossible for the phone to be activated on your account without it, so I would recommend just selecting the $30 option.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc.

Questions about AFP and SMB network drives

Is there a major speed difference between the two? At my school I am given network drive space, and my drive seems accessibly via afp:// and not via SMB.
I transferred a 30MB file once and afp:// transferred at about 1 MB a second. This seemed about as fast as when I used OS 9 and connected to afp:// servers.
Also can one access a afp:// drive on a Windows 98 computer without third party software (PC MacLan)? The It director has been trying to help my Windows 98 laptop also gain access to my drive, but everything he has told me to try has failed. Perhaps because Windows 98 cant connect with Appletalk over TCP/IP servers.
Thanks for the help.
If this message belongs in another forum, please let me know.
John

I am on a T1 and using the ibooks network card.
Back in 2005 I was on a Performa 6360 and also used a network card (100 base T) on a T1.
Its strange why the ibook would be no faster than the performa for transferring files.
So can Windows 98 connect to afp:// servers?
john

Motherboard upgrade, question about compatibility with existing hard drives etc.

Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
Thanks,
Chris

Quote from: russianpolecat on 05-May-11, 07:19:26
Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
Thanks,
Chris
Case, HDD - Yes
Onboard graphics - No
PSU, maybe but probably not. Something with more power would probably be wise to get. What PSU you get would depend on the CPU & graphics card you get.

Question about LaCie 500GB external hard drives

Are the LaCie external 500GB hard drives actually 2 hard drives inside the case or just 1? Are they good?
I read a review that the larger LaCie external hard drives often fail and are not as reliable as the samller ones (like 300GB). Is this true?
G5 Dual 2.3 GHz Mac OS X (10.4.6)

Hi Tim,
I have an external LaCie Porsche Design 500Gb drive, and it is definately only one drive. LaCie's spin down when not in use, which some external drives don't. Spinning down extended the lifespan, so I doubt there will be problems because of it.

A question about ordering 32-bit Test drive DVDs on SAP Knowledge Shop

Similar Messages

Maybe you are looking for