A question about output of show isakmp sa

I couldn't find any detail explanation of show isakmp sa output on ASA platform on CCO,
from ASA show isakmp sa, i can find some SA Type is user,some SAs type is l2l
all ipsec vpn configured type on this ASA is L2L, why the type of SA is user under some SA,
what is means of type is user?
thank you!
ASA# show isakmp sa
IKEv1 SAs:
   Active SA: 5
    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 5
1   IKE Peer: 1.1.1.1
    Type    : user            Role    : initiator
    Rekey   : no              State   : MM_WAIT_MSG2
2   IKE Peer: 2.2.2.2
    Type    : user            Role    : responder
    Rekey   : no              State   : MM_WAIT_MSG3
3   IKE Peer: 3.3.3.3
    Type    : L2L             Role    : responder
    Rekey   : no              State   : MM_ACTIVE
4   IKE Peer: 4.4.4.4
    Type    : L2L             Role    : responder
    Rekey   : no              State   : MM_ACTIVE
5   IKE Peer: 5.5.5.5
    Type    : L2L             Role    : responder
    Rekey   : no              State   : MM_ACTIVE

we have many ipsec vpn connection configuration, same config, but only some of them showing Type: User,
I find when ipsec connection not in active state. show isakmp sa show Type:user.
is this a default state.
I haven't found detail explanation from CCO ASA document?

Similar Messages

Question about Aperture slide shows

Question about Aperture slide shows. How can I eliminate banding in a blue sky when photos are displayed in Aperture Slide shows?

What kind of banding? Do you have a screenshot?
It could be jpg compression related, I think the previews are all jpgs.

Question about LIVE slide show

Hi,
I use keynote for my live presentation slide to slide...sometimes i need to jump the slide to the other slide immediately by hit the number of slide that i wish to jump to (say from slide 2 i wish to jump to slide 26 for the next slide ,i just hit the number 26 and enter i'll be there on the spot)
Question,
when i hit the number of the next slide as the above example, keynote will show a slide bar on the top that will show on the screen that i projected as well...how do i avoid the "slide bar" when i hit the number26?
Sorry for the complicated description above...cause,i really don't know how to descript the situation that i facing...haaaa...hope you all can understand..and give me some tips to solve it!!!!
Thanks and appreciate!!!

Question 1 - Yes, exactly.
Question 2 - Rehearse Slideshow mode shows you what the Presenter Display will look like when you are in Play Slideshow mode, but for situations when you only have one monitor. A good example use case is when you are on an airplane and you want to rehearse your slideshow (hopefully not out loud) and you obviously only have your laptop monitor to work with. This way you can get used to working with the Presenter Display. When you go to Play Slideshow mode, it will look exactly the same, only your audience will be seeing your finished slideshow without the notes, Slide Browser, etc. from the secondary display output.

Question about outputting DVCPRO HD to MiniDV Tape

Hi There,
I have a DVCPRO HD 720p24 project that I need to output onto MiniDV and I have a few questions. I am running FCS2 with the latest updates.
1) I have an older sony camera (DCR-PC100) that I am outputting to. I would like to maintain my 16x9 aspect ratio. Provided I have selected anamorphic in my sequence settings, will my camera record a 720x480 image with the aspect ration intact? The camera is just a 4:3 consumer camera and it's a bit older. Just don't want to lose any quality.
2) As it states in my signature, I'm working on a MBP so my only video output for coloring monitoring and that type of thing is through firewire and out of my camera. This doesn't work correctly from my native 720p24 sequence - it just sticks on one frame. I am already in the process of rebuilding a 720x480 NTSC sequence. Is this the only way I can output properly to a monitor?
Thank you for reading my post

Hi Spiff,
Well I mainly assumed so because the most practicle way to screen a selection of films in one session at a short film festival is to compile a tape with all the films set to one ratio (usually 4:3)and I thought you were specifically asked to send a tape.
However it would be wise indeed to call them.
Some festivals use/compile miniDV or DVDs some others BetaSP or DigiBeta.
With regard to transferring the film onto your PC 100 (Mighty PC 100! It was very popular 4-5 years ago amongst domestic camcorders, so popular that Sony put a PC 12O in the market with enahanced features) providing it works fine, then you will be fine to use it. Renting a deck or using a pro camera with miniDV capability will not improve the quality of your video.
If your anamorphic version looks fine then lay that one on the tape.
Try to use Panasonic pro master 63 minutes miniDV tapes. THey are white tapes.
Good luck with the festival!
G

Question about eth0 not showing up in my OEL Linux 6 install on VirtualBox

Hi folks,
I'm using the latest Virtual Box VM software. I've installed O Enterprise Linux 6. This is on m laptop. My laptop uses a wireless network connection. I want to make the wireless network card work in my OEL 6 virtual host when it boots up. In VirtualBox, I've configured the Network to be Bridged and selected the Wireless device. I then click the Advanced and select PCnet-FAST III (Am79C973) for Adapter type.
When I boot up the linux host, I only have an lo network adapter. There is no eth0. I don't have a lot of experience with this so I'm wondering if I am doing something wrong or if this is expected and I have to then setup an eth0 device once the OS is booted.
Any help is greatly appreciated

This seems to be at least your third recent post about working with an OS on Virtualbox.
I suggest you find the forums at the Virtualbox site and ask your question over there.
The users over there will be better prepared to discuss such topics.
There are no forums here at OTN for Virtualbox issues.

NOOB question about outputting final edit

I'd used FCE for several years, and am in the midst of switching over.
I've gone through 2/3 of Mr. Wolsky's book and have probably 4-5 completed projects with FCP X. However, there have been some FCP X updates since the book was written.
I will be filming a concert for a friend, and have learned how to create and edit a multi-cam clip.
My friend wants a recording of the complete concert, and in addition to the complete concert, he also wants individual songs from the concert separated from the complete show as "stand alone" files. He wants to be able to upload these "stand alone" song videos to his own website, so I was going to deliver the edited files of the complete concert, and files of the individual, edited songs on a external hard drive.
I'm using consumer-level cameras (Sony CX 700, Sony PJ710, Sony HC9, iPhone) recording at 1080.
My question is, what settings/options should use to share the finished video so that he can upload them (from his PC) at the highest quality?
Thanks in advance for any assistance.
Gary

Gary Markovich wrote:
… It there some kind of generic HiDef QuickTime format that is somewhat "universal" to both platforms?
I'm delivering my son's weekly game-reports to the soccer-moms & -dads on various platforms - incl. Xbox/PS3 as media-players. 'My' universal format is 720p as h264.mp4.
so, my workflow is:
• exporting a master-file (for future use, the 'raws' get dumped after a year), which is actually 720p - not fullHD, for two reasons: a) I hadn't the recording equip until now, b) some device stumble with higher bit-rates 1080p makes neccessary
• open the file in MpegStreamclip, go straight to save-as, and in the drop-down I choose mp4 - this 're-wraps' the file into a mp4 media-wrapper without lossy re-encoding
==> the resulting mp4 is fully compatible on all platforms I know of.-
note:
I'm still not fully aware of the various 'new' export options since vers06 of FCPX … esp. the 'package' option, which allows multiple exports within one click, is tempting, although I assume, my brave ol' MacMini will start choking on so much encoding
a friend of mine owning an i7 iMac blows me away when hitting Export - actual hardware makes a difference
mov asks for Quicktime-for-Windows on PCs - which some Windows users are hesitant to install.
proRes is a MacOS-proprietary format .... and is a lil' 'bloated' for exchange.
so, h264 is universal (since YouTube), mp4 is 'more universal' than mov

Confused about output of show vlan id command

I configured a few vlans on a switch. 3 vlans, each assigned only one port. The ouput of show vlan brief shows me exactly what I would expect:
IOU1#show vlan bri
VLAN Name Status Ports
1 default active Et0/0, Et0/3, Et1/3
101 VLAN0101 active Et1/0
102 VLAN0102 active Et1/1
103 VLAN0103 active Et1/2
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
But confusingly when I do a show vlan id for one of my vlans it lists the vlan's interface and then two other interfaces:
IOU1#show vlan id 102
VLAN Name Status Ports
102 VLAN0102 active Et0/1, Et0/2, Et1/1
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
102 enet 100102 1500 - - - - - 0 0
Primary Secondary Type Ports
Et0/1 and Et0/2 are trunks to two other switches. I don't get why its listing those trunk ports though I was only expecting it to show Et1/1. Is listing those ports there because this vlan is connected via trunk ports to other switches? I don't know exactly what those two interfaces there is telling me.

I think IOU and IOL behave this way. When you say real switch, on nexus platforms in my experience they are same as what you have shown above as IOU.
A switch like C3750, C3560, C3650, C3850 etc.... they will have regular output that you might be used to, i.e. not showing trunk interfaces in the vlan id output.
Hope this helps.

QUESTION ABOUT OUTPUTTING to a .txt File???

I want to output some input to 3 different Output and then read those in later... my problem is HOW DO I SET 3 DIFFERENT OUTPUT FILES THAT WILL BE ABLE TO GET THE INPUT EVERY TIME THE PROGRAM IS RUN....?? I DO NOT WANT THE USER TO BE ABLE TO NAME THOSE FILES... I WANT THOSE FILES TO BE OPENED OR CREATED WHEN THE PROGRAM IS RUN... RIGHT NOW I JUST HAVE ALL THE INPUT GOING TO THE SCREEN AND THAT'S NOT WHAT I WANT IT TO DO.. I WANT THE INPUT TO GO TO SEPARATE 3 FILES...
THANKS..
import java.io.*;
import java.lang.*;
import java.util.*;
public class Assemble
     public static void main(String args[]) throws IOException
          if (args.length > 0)
               System.out.println("");
               System.out.println("");
               System.out.println("");
               System.out.println("Assemble.class is a small program that");
               System.out.println("takes in as input a body of text and then");
               System.out.println("outputs the text in an order according to");
               System.out.println("the tags that are placed in the input.");
          else
               System.out.println("");
               System.out.flush();
     BufferedReader in = new BufferedReader (new InputStreamReader( System.in ));
     String input;
     while (true)
          input = in.readLine();
          if (input == null)
               break;
          else if ( (input.compareTo("<HEAD>")) == 0)
               do
                    input = in.readLine();
                    if ( (input.compareTo("</HEAD>")) != 0)
                         System.out.println(input);
               while ( (input.compareTo("</HEAD>")) != 0);
          else if ( (input.compareTo("<BODY>")) == 0)
               do
                    input = in.readLine();
                    if ( (input.compareTo("</BODY>")) != 0)
                         System.out.println(input);
               while ( (input.compareTo("</BODY>")) != 0);
          else if ( (input.compareTo("<FOOT>")) == 0)
               do
                    input = in.readLine();
                    if ( (input.compareTo("</FOOT>")) != 0)
                         System.out.println(input);
               while ( (input.compareTo("</FOOT>")) != 0);

To write to a file, use PrintStream. It has a method println() like System.out, except you can specify a File as the target, e.g.:
PrintStream ps=new PrintStream(new FileOutputStream(new File("myfile,.txt")));And to write a string to this file,
ps.println(String);

Question about Output Preview

I have a simple Illustrator file. The color values are C=0 M=0 Y=0 K=100
When I run the file through Acrobat Professional's Output Preview to check the colors (I am looking to make sure there are no C, M or Y values), I get values for all four (CMYK).
What gives here?
Thanks

May I suggest the setText() method?

Question about output in Excel file

Hi all experts
I am trying to export a report to excel sheet. Got one problem, in the report there are codes of companies, like "09", "08", but when exported by using WS_EXCEL FBS, i got the result "9", "8".
That is> the Zero at the beginning is lost.
How can i solve this problem easily?
question2, how can i make the alignment better. (now some are left and some are right aligned)
thank you !
here is my coding
CALL FUNCTION 'WS_EXCEL'
EXPORTING
FILENAME = file1
SYNCHRON = ' '
TABLES
data = tab_comp
EXCEPTIONS
UNKNOWN_ERROR = 1
OTHERS = 2
file1 = 'c:\tmp\b.xls'
Richard

Hi,
Conventionally it is not possible.
If u can compromise to some extent its is possible. Check below code.
U may have to give one check box in selection screen/Push button in output list.
Based on the selection(In case of check box)/Click(In case of push button) u can download the data.
U have loop through ur itab and modify that value by concatenating the special character '
But it will also be downloaded to excel
If u don't understand what i am saying just copy paste below code and see whether it will be fine.
TYPES:BEGIN OF t_tab,
        empno(10) TYPE c,
      END OF t_tab.
DATA: i_tab TYPE TABLE OF t_tab,
      wa_tab TYPE t_tab.
CLEAR wa_tab.
wa_tab-empno = '0075694'.
APPEND wa_tab TO i_tab.
CONCATENATE '''' wa_tab-empno INTO wa_tab-empno.
MODIFY i_tab FROM wa_tab INDEX 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    filename                      = 'E:/test.xls'
*   FILETYPE                      = 'ASC'
*   APPEND                        = ' '
   WRITE_FIELD_SEPARATOR         = '#'
*   HEADER                        = '00'
*   TRUNC_TRAILING_BLANKS         = ' '
*   WRITE_LF                      = 'X'
*   COL_SELECT                    = ' '
*   COL_SELECT_MASK               = ' '
*   DAT_MODE                      = ' '
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = i_tab
EXCEPTIONS
   FILE_WRITE_ERROR              = 1
   NO_BATCH                      = 2
   GUI_REFUSE_FILETRANSFER       = 3
   INVALID_TYPE                  = 4
   NO_AUTHORITY                  = 5
   UNKNOWN_ERROR                 = 6
   HEADER_NOT_ALLOWED            = 7
   SEPARATOR_NOT_ALLOWED         = 8
   FILESIZE_NOT_ALLOWED          = 9
   HEADER_TOO_LONG               = 10
   DP_ERROR_CREATE               = 11
   DP_ERROR_SEND                 = 12
   DP_ERROR_WRITE                = 13
   UNKNOWN_DP_ERROR              = 14
   ACCESS_DENIED                 = 15
   DP_OUT_OF_MEMORY              = 16
   DISK_FULL                     = 17
   DP_TIMEOUT                    = 18
   FILE_NOT_FOUND                = 19
   DATAPROVIDER_EXCEPTION        = 20
   CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Here output in excel is '0075694
Thanks,
Vinod.

A question about output result

i want to print the query result of a database table into the screen. but i found it difficult to align the results. listed below is an example
Mary F 28
Alexandra M 30
i usd the listed command to print above results:
System.out.println("\t" + name + "\t" + gender + "\t" + age);
i had planed to use '\t' to align the output, but i found length of data are different. like "Mary", it is less 8 characters, while "Alexandra" requires 9 characters. this leads to the output is not aligned. the expected result would be like this:
Mary F 28
Alexandra M 30
anyone knows how can i align the output ? thanks a lot!

by writing something like
public static String leftAlign( String string, int length)
StringBuffer buffer = new StringBuffer( length);
if( string.length() < length)
   buffer.append(string);
   for ( int idx = string.length(); idx < length; ++idx)
     buffer.append( ' ');
else
   buffer.append( string.substring(0,length);
return buffer.toString();
System.out.println( leftAlign( "", 9) + leftAlign( name, 30) + leftAlign( gender, 5) + leftAlign( age, 5) );

Workflow question about output module names

Hi!
I have been working on a massive project that requires hundreds of lower thirds.
After finishing the actual design, my workflow has been like this:
1. Save the project with a new file name
2. Replace the old text with the new one
3. Save
Before doing that, I have added the render comp to the render queue. For the output module name and location, I have used a template that automatically gives the output module the project name. This has been great, since I have only needed to enter a new project name when "saving as" and the render module has automatically taken that name for the output file name. A great speed saver when you have to do tens of repeats.
Now here comes the problem:
After I had created all the necessary AE-projects, I was thinking of importing all the projects in to a single AE-project and then simply hitting render (since all the output modules were automatically added to the render queue when importing the projects) so that I could leave the computer rendering for a few days and do something else in the mean while. BUT when I import the projects, the name for the output module changes for every item in the render que to represent the current project. In other words I loose all my carefully planned names that I used to have in the output modules, because AE replaces them with the current project name.
Is there any way of keeping the workflow I described without having to rename all the output modules after importing the projects in to a single render project? Is there some other way to get a good workflow on a project like this?
Any tips will be highly appreciated!

Should be perfectly doable to iterate through the appProjectIItem list. Off hand I'm not sure if it recognizes folders, though, so maybe it will be a bit more tricky to get what you want. IMO the safest way to avoid any confusion would be to have the script itself do the import. That way it can store the name of the imported file as a variable or some text file and reuse it when it renames the RQ items...
Mylenium

Question about output the com port signal

Dear all,
I can successfully change the received signal from COM1 into ASCII, and I can use System.out.print to output the ASCII. However, I cannot output the received signal in the JTextField.
Could anyone help me to solve this problem please?
Thank you so much

May I suggest the setText() method?

A question about HD TV shows in the iTunes store

hi,
are the HD shows for sale in itunes really only for watching on a HD TV via apple tv? do they look and sound on better on a MAC or ipod than SD video.
thanks

When you buy an HD episode, iTunes downloads both the HD and the SD version. You can watch the HD version on your Apple TV. You watch the SD version on your computer or iPod. The HD version won't transfer to the iPod.
Best of luck.

I am restating my question about outputing specific voltage values

Hello,
Right now, I use the function generator vi , an example vi from DAQ and analog out. So from that VI i get functions such as sine, sqaure with a user defined amplitude and frequency. Now what i want to do is this:
Develop a vi which will output specific voltage values defined by the user (me). i.e, say i want the vi to output voltage values such as 0.1,0.2,0.3,4,6,8,10,12,14,0.4,0.5, then i just write these values in the table and the vi should ouput these voltage values one after the other in near real time. I hope i am clearer this time.
I am an amatuer user of Labview and am currently working on a student version of Labview 7.0 Express.
Thank you
Ujwal

Thanks for the reply.
Yes, i think you have understood my problem correctly now. But the only thing i would like to clarify is that I would input the voltage values before starting the program, say in the form of a array/table. Once i put these values the program should output these voltage values. These voltage levels should be output in near real time i.e., the time between two values should be in the microsecond domain.
Here are the sample voltage levels I am interested in. ( but i want these values alterable, i.e., i should be able to input these values before running the vi)
Voltage Levels(V)
0.1
0.2
0.3
0.4
15.0
-15.0
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
The time lag between two levels should be preferably as less as possible in microseconds. I am not able to tell you any specific value, but 5-10 microseconds should be fine.
Just a query: Can this whole thing be achieved by reading this from a file by changing the interface of the existing function generator vi to a read from file ( spreadsheet). I tried this but the parameters of inputs in the program didnt match and hence the vi failed to run. Is this a possible approach though?

A question about output of show isakmp sa

Similar Messages

Maybe you are looking for