A question about search level

In the parameter :"DEADLOCK_DETECTION".
It's explain include a substantive it's named :"search depth".
I can't find the explain about "search depth".                                                   Please help me.
thanks

Hi,
the search depth specifies how far the deadlock detection should search for the reason of the deadlock. A higher value would search deeper for the reason, but would also increase the time needed to search (and find).
We normally recommend <b>against</b> changing the default value of this parameter. Normally also share locks are used, where we can't really specify all tasks that hold sharelocks (as opposed to deadlocks consisting only of tasks holding only exclusive locks), but only the number of tasks in total. If the deadlock isn't found, the Request_Timeout comes into effect.
Does that help you understand this parameter?

Similar Messages

  • AutoSPInstaller - Question about Search Topology

    Hello,
    I would deploy a new sharepoint infrastructure with autospinstaller and i have some questions about search topology.
    This infrastructure will host at end 2 EDM (10-20TO) and probably some user sites.
    I will provision 2 WFE and 2 APPS.
    Search Topology (4 servers) =>
    - Crawl Component :
    SRVA & SRVB
    - Query Component :
    SRVC & SRVD
    - Search Query and Site Settings Service :
    SRVA & SRVB
    - Admin Component :
    SRVA & SRVB
    - Index Component :
    SRVC & SRVD
    - Content Processing Component :
    SRVA & SRVB
    - Analytics Porcessing Component :
    SRVA & SRVB
    I read many articles about this subject but all were different !
    Anyone can apply my choice or make me a proposition ?

    Hi,
    I just want confirme that the infrastructure is correct before deploy it. Do i really need to isolate admin component, for now i put it on only one app server.
    For "Distributed caching", i planned to install it on both WFE servers.
    Thank you for your help.
    Jeremy

  • Question about searching

    Hi all,
    I'm considering Oracle BDBJE for a project that stores visited url's (data) based on a key of ip-address (4 bytes) combined with a date (long) to make the keys unique.
    If want to search on date (ignore ip) do I have to make a secondary database that has the date of the visited url's as primary index?
    Does a method like Cursor.getSearchKeyRange, if supplied with partial key, always search a the beginning of the key? Or could I use it to search for a date by only supplying the date-part of the key? Prop. in this case the bytes for the date will be mistaken for the bytes of the ip-address that comes first in the key.
    Thanks for any help.
    regards,
    Jeroen

    Hi Jeroen,
    I'm not sure I have all of your data model yet, but I think you've given us enough for me to say you should likely try one or possibly two secondary databases.
    If you have not already done so you should review the documentation on Secondary Indexes as found here:
    http://www.oracle.com/technology/documentation/berkeley-db/je/GettingStartedGuide/indexes.html
    Inserting/Modifying records is faster without using a secondary index. But the queries that you have identified would perform better with secondary indexes. But you should experiment with a few different approaches and compare that with your performance goals.
    Also, if you have not already thought about this, I would consider using DPL to implement this, especially since you will be evaluating alternative database designs. You will find that the implementation time is faster and you can also make changes quickly.
    http://www.oracle.com/technology/documentation/berkeley-db/je/PersistenceAPI/BerkeleyDB-JE-Persistence-GSG.pdf
    You know your data best, but based on the info you provided here are my thoughts/alternatives:
    Primary Database key = IP/Date or Maybe Date/IP is better if the Secondary for IP address exists
    data = URL plus other data not sure what
    Secondary Database Key = URL (I left out date because you said it is not likely that the same URL will exist for multiple dates).
    Possible Secondary Database Key = IP address (Which URL's were visited by IP X).
    Again, I think you may want to try out something like this a model your inserts and also your query performance. Feel free to post further questions about any results you are getting as you move forward.
    Also, if you have not already seen this I would keep this URL handy and consult with it before you post:
    http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html
    I hope this helps!
    Ron

  • A question about search help and input help,PLZ take a look at it.

    hi everyone,
    i want to know the difference between search hlep and inpu help
    can anyone tell me about that?
    thanks

    HI
    BOTH ARE SAME
    you can define F4 help in 2 ways
    in SE11 or in the report program
    IN SE11
    Attaching a search help to a table field
    Choose the field name, click on search help tab and
    provide the name of the search help.
    A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
    Attach the search help to the table field
    The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
    Attaching a search help to a data element
    Provide the search help name and the parameter name
    under the further characteristics tab of the data element.
    If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
    Also note that the input F4 help would be available wherever the data element is used.
    Attaching a search help to a screen element
    A search help can be directly assigned to a screen field in two ways.
    The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
    The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
    However, input help is only available for this particular screen.
    in REPORT PROGRAM
    in this way we declare in report program
    TYPES : BEGIN OF ST_OBJID_SH,
    OTYPE TYPE HRP1000-OTYPE,
    OBJID TYPE HRP1000-OBJID,
    END OF ST_OBJID_SH.
    DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
    DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    *SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
    SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
    SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
    IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
    INTO TABLE IT_OBJID_SH
    WHERE OTYPE = 'D'.
    IF SY-SUBRC EQ 0.
    SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE = ' '
    RETFIELD = 'OBJID'
    PVALKEY = ' '
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'S_OBJID'
    STEPL = 0
    WINDOW_TITLE =
    VALUE = ' '
    VALUE_ORG = 'S'
    MULTIPLE_CHOICE = ' '
    DISPLAY = ' '
    CALLBACK_PROGRAM = ' '
    CALLBACK_FORM = ' '
    MARK_TAB =
    IMPORTING
    USER_RESET =
    TABLES
    VALUE_TAB = IT_OBJID_SH
    FIELD_TAB =
    RETURN_TAB = RETURN_TAB
    DYNPFLD_MAPPING =
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDIF.
    Check this out
    http://www.sap-img.com/abap/value-request-for-parameter.htm
    ******************************8
    sample program
    report zrich_0001 .
    data: begin of ihelp occurs 0,
    field type char10,
    ftext type char50,
    end of ihelp.
    data: a_field(20) type c.
    select-options s_field for a_field.
    initialization.
    ihelp-field = 'A'.
    ihelp-ftext = 'Description A'.
    append ihelp.
    ihelp-field = 'B'.
    ihelp-ftext = 'Description B'.
    append ihelp.
    ihelp-field = 'C'.
    ihelp-ftext = 'Description C'.
    append ihelp.
    at selection-screen on value-request for s_field-low.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield = 'FIELD'
    dynprofield = 'S_FIELD'
    dynpprog = sy-cprog
    dynpnr = sy-dynnr
    value_org = 'S'
    tables
    value_tab = ihelp.
    start-of-selection.
    one more program....
    REPORT ZHELP .
    TABLES : MARA.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS : P_MATNR(10) TYPE C.
    SELECTION-SCREEN END OF BLOCK B1.
    DATA : BEGIN OF ITAB OCCURS 0,
    MATNR TYPE MATNR,
    END OF ITAB.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
    SELECT MATNR
    FROM MARA
    INTO TABLE ITAB
    UP TO 10 ROWS.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = 'MATERIAL NUMBER'
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'P_MATNR'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = ITAB
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3.
    Create it from SE11.
    enter search help
    and create elementary
    enter description and below Table name
    and the fields
    see the doc
    1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
    2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
    3)An elementary search help defines the standard flow of an input help.
    4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
    5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
    6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
    pls go through this for search help creation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

  • One little question about searching partial text in object name

    Hello Everyone,
    I have searched a bit but couldn't find an answer about this.
    I am a Freehand user and i am currently using navigation names for differents items. Works perfectly good.
    But now i need to search part of the items name.
    For example i have the objects named in the nabigation panel as:
    - "ItemA-rotation" for the first group of items
    - "ItemB-static" for the second group of items
    as for now i can search for all the items A by typing in the search graphic panel "ItemA-rotation" but i would like to find both item A and B by typing a unique search request.
    Is it possible to write something like: "*Item*" to search every items that contains the part "Item" in the full name ?
    Thank you for your future answers.
    Cheers.
    PS: i am using Mac os X with Freehand MX.

    It appears it isn't possible. I set up a similar document with spaces added between the word "index" and the letters "A" or "B". My thinking was that the connected wording of your phrase "ItemA-rotation" was limiting the search. But searching for the word "index" didn't reveal all the items; it had to be typed exactly as the name was set up in the Navigation Panel. Perhaps I'm missing some unknown control characters but I have never seen what those could be.

  • Question about VOLUME LEVELS for BURNING...

    when i download music from the itunes store, the volume levels sound fine when i play them from itunes or the ipod. but when i burn the albums to CD, the volume is significantly LOWER than other audio CD's. the same is true when i burn them in mp3 format. does anyone know how to adjust the sound levels (turn them up) when i burn the albums, or is this a common problem with music downloaded through itunes? i don't encounter this when i copy directly from an audio CD and burn to another. someone HAS to know something about this. it's really frustrating. help me out, friends.
    Dell E1505   Windows XP  

    With all due respect, I have burned alot of CDs with soundcheck checked and the recipients of my 'mixes' all complained. I noticed it as well. Perhaps there is another place where user checks soundcheck...?
    I know soundcheck can make playing disparate tracks in itunes level, but that does me no good for burning.
    Thanks for the reply.
    PS: here are reviews I read re: ivolume. I have no idea whether or not they reflect the views of others, but they do exist (source: http://www.macupdate.com/reviews.php?id=12687&pid=142223). I hesitated considering ivolume because some of the problems seem to be linked with itunes 7, which I use.
    Original Review:
    Type: Review
    Author: adfasdfasdfasdf
    Overall:
    Features:
    Ease of Use:
    Value:
    Stability: It still can't process iTMS files.
    So, what is it good for, if you have music you encoded yourself, and music you bought? Try to listen to such a playlist: your ears will fall off...
    It's a good idea, but without m4p support: forget it. (2/15/2006, Version: 2.0.2)
    [ Write Reply ]
    and another:
    Type: Review
    Author: gryphonent
    Overall:
    Features:
    Ease of Use:
    Value:
    Stability: I purchased this almost a year ago. Had great expectations, and initially the sound level seemed indeed more consistent on my iPod. However, with iTunes 7 this changed. I also found some bugs in the app that were never fixed. The developer is non-responsive and hasn't delivered an update for a while now. I for one have deleted the app from my system and can only warn people not to waste their money on iVolume. (1/13/2007, Version: 2.0.2)
    [ Write Reply ]

  • Javadoc question about top-level specification

    Quoting
    http://java.sun.com/j2se/javadoc/writingapispecs/index.html#top-level
    Top-Level Specification
    The top-level specification is composed of those specifications that apply to the entire set of packages. It can include assumptions that underlie the other specifications, such as all objects are presumed to be thread-safe unless otherwise specified.
    In addition to the class specific requirements, there are overall Java platform API documentation requirements with respect to handling unchecked exceptions (exceptions that derive from java.lang.RuntimeException). It would be helpful to develop some blanket statements that describe the general situations when a Java application should be prepared to encounter one or more RuntimeExceptions.
    My question is how do you get an HTML file included in the Javadocs so they show at the top level where the packages are listed?
    Thanks
    Bill

    Yes, that would seem to be apply, but I had some questions.
    1. This seems to suggest that overview.html will be added to the package-summary generated for each class. That is not what I want.
    2. I could not make it work. Here is the command I am using to build the javadocs.
    javadoc  -d docs -author -overview overview.html -doctitle "CkEntry / CkViewer Application and APIs" -sourcepath d:\workspace\ckviewer\src cprs.as400 cprs.ckentry cprs.ckviewer cprs.pc5250 cprs.roi cprs.util neva vistech.imageviewer vistech.jai.render vistech.util 1>jdocs_out1.txt 2>jdocs_out2.txtjavadoc has a problem with overview.html. This is the single line in jdocs_out2.txt:
    javadoc: Error while reading file overview.htmlNot very informative. Overview.html is in the folder identified by -sourcepath
    Thanks for looking at this. I appreciate the help.

  • Question about searching in finder.

    I updated to Lion which is much more annoying than the previous versions.  When searching in finder, how do I get it to search everything inserted of just the file name.  When I type something in it defaults to "Filename Contains XXXXXXX".  And every time I have to change it search everything.  Is there a way to make it search like it did with Snow Leopard.
    Lion also has a drop down window for searches.  How is this disabled?
    Thank you for your help.

    command-F will bring up the search window.

  • Dumb question about searching these discussion boards

    I used to be able to search these boards, but now I can't find where to do this. I tried using the top right corner search box, but that searches the Apple site for everything except discussions.
    Am I blind, mad or has something changed?
    Judging by my wife's comments, the first seems most likely.
    Grateful for anyone that can point me in the right direction, and give me a white stick.

    In the mean time you can use google with "site:discussions.apple.com" as part of the search query.

  • Basic question about a level 2 switch when adding an IPv4 Address

    Wow, you are all awesome!!!

    I am studying for the Network Plus exam and I have a lab that is showing me how to run simple commands on a switch. In the lab, it has me go to the switch, enter enable mode, then configure the switch. It then has me enter an IP address and Subnet. What I would like to know is what is the IP address configured for? Is that the PC's IP address and Subnet? Sorry if the question is remedial, but I really would like to know what the switches IP and Subnet correspond to.
    This topic first appeared in the Spiceworks Community

  • I got a question about search help comes from check table

    But it dosen't work because it always have its value from the  first criteria.
    And I don't want no values be added into the criteria.
    How can I solve this problem.

    Seems like an interview question, if not tell us the purpose and scenario you are working on.
    Regards
    Karthik D

  • Question about volume level automation (GB newbie here)

    I know how volume level automation works for the master track, i.e. in and out and such, but can you do this with a single track? basically one of the tracks in a song I've recorded has a bit of hiss at the end of it, which I would like to fade out. I've tried to cut that bit out completely, but it ruins the feel of that particular track, so I was wondering if there was a way to make that track fade out.

    on the right end of the row of buttons just under the track name, there is a triangle. click it and the automation of the track will become visible. you can automate volume and pan using points on the line that runs throgh the timeline.
    before you start playing with complex curves, make sure you've got the level of the loudest part set to where you want it using the slider - otherwise, you'll have to adjust each point on the automation curve to adjust overall volume... that's troublesome (if someone has a work around/key command i'd love to hear it!).

  • Hi Experts, a question about search help in selection screen?

    Hi Experts,
    I have a selection screen and two parameters, one is plant and another is material, what I want is as following:
    the user select a plant and when he select the material the material should be in the plant he has filled in, how can I handle this? detail help, thank you in advance.
    Kind regards
    Dawson

    Hi,
    Check the below code.
    tables: t001k.
    For Identification Number
    DATA: BEGIN OF it_bwkey OCCURS 0,
            bwkey LIKE t001k-bwkey,
          END OF it_bwkey.
    data: v_bukrs(4).
    For Run date
    DATA: BEGIN OF it_bukrs OCCURS 0,
            bukrs LIKE t001k-bukrs,
          END OF it_bukrs.
    DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS: p_bukrs(4) TYPE c.
    SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK main.
    INITIALIZATION.
    SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING retfield = 'BUKRS'
    dynpprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = 'P_BUKRS'
    value_org = 'S'
    TABLES value_tab = it_bukrs
    EXCEPTIONS parameter_error = 1
    no_values_found = 2
    OTHERS = 3.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
    TABLES: t130r.
    DATA: BEGIN OF dynpfields OCCURS 0.
    INCLUDE STRUCTURE dynpread.
    DATA: END OF dynpfields.
    DATA : sy_repid LIKE sy-repid,
           sy_dynnr LIKE sy-dynnr.
    CLEAR dynpfields.
    REFRESH dynpfields.
    dynpfields-fieldname = 'P_BUKRS'.
    APPEND dynpfields.
    sy_repid = sy-repid.
    sy_dynnr = sy-dynnr.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    dyname = sy_repid
    dynumb = sy_dynnr
    TABLES
    dynpfields = dynpfields
    EXCEPTIONS
    OTHERS = 01.
    IF sy-subrc = 0.
    READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
    IF sy-subrc = 0.
    v_bukrs = dynpfields-fieldvalue.
    ENDIF.
    ENDIF.
    SELECT bwkey FROM t001k INTO TABLE it_bwkey WHERE bukrs = v_bukrs.
    DELETE ADJACENT DUPLICATES FROM it_bwkey.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'BWKEY'
    dynpprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = 'S_BWKEY'
    value_org = 'S'
    TABLES
    value_tab = it_bwkey
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS = 3.
    IF sy-subrc <> 0.
    *MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Regards,
    Kumar Bandanadham

  • Question about searching 600 tables

    Dear all Is there a way to write a simple query that would generate a list of tables that contains the names John Smith. Thank you. A simple example will help.

    A couple of solutions from Michaels
    michaels>  var val varchar2(5)
    michaels>  exec :val := 'as'
    PL/SQL procedure successfully completed.
    michaels>  select distinct substr (:val, 1, 11) "Searchword",
                    substr (table_name, 1, 14) "Table",
                    substr (t.column_value.getstringval (), 1, 50) "Column/Value"
               from cols,
                    table
                       (xmlsequence
                           (dbms_xmlgen.getxmltype ('select ' || column_name
                                                    || ' from ' || table_name
                                                    || ' where upper('
                                                    || column_name
                                                    || ') like upper(''%' || :val
                                                    || '%'')'
                                                   ).extract ('ROWSET/ROW/*')
                       ) t
    --        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
           order by "Table"or
    SQL> select table_name,
           column_name,
           :search_string search_string,
           result
      from cols,
           xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
           columns result varchar2(10) path '.'
    where table_name in ('EMP', 'DEPT')
    TABLE_NAME           COLUMN_NAME          SEARCH_STRING        RESULT   
    DEPT                 DNAME                ES                   RESEARCH 
    DEPT                 DNAME                ES                   SALES    
    EMP                  ENAME                ES                   JONES    
    EMP                  ENAME                ES                   JAMES    
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   PRESIDENT
    EMP                  JOB                  ES                   SALESMAN 
    9 rows selected.This latter one works on 11gR2 upwards (as far as I know)

  • Question about setting track level

    Hi I finally got my new macbook pro and moto 8 pre and have just today tried a bit of recording just to get used to it. I am at the moment using garage band. I have a question about track levels. In Garage Band when I select a track to record there is a slider for input level or an option of clicking the automatic level control. But for some reason they are both just that color of grey you get when something can not be selected on a computer. How do I activate this? It's strange as I did actually manage to record the track, I just can't seem to really adjust the level. I thought maybe it has to do with the motu and I can only select the track level there, and that garage band level setting are (rightfully) disabled? Maybe that's what I should be doing, but just a bit confused. Anyway, thanks in advance for whoever takes the time to help out a newbie.

    Ah, ok. Good to know. Thanks for the info.

Maybe you are looking for