A question about the face call through wifi

Hi I'm currently waiting for iphone4 in Korea
one of the main reasons for me to buy iphone4 is
I can use face call(I know it isn't the official term but
I hope everyone understands what I mean) for free through
wifi. So right now my biggest concern is that does the free face
call exclusively possible inside of the us or does it possible
internationally through wifi. In other word does the face call possible
between the iphone4 user in Korea and in the us?
I'll study in the us and my parents stay in Korea. I hope the face call
will be possible between me and my parents. Thay way will very much
narrow the geographical gap betwen me and my parents.
Thank you.

I think it will be, I saw a post I think on engadget.com that shows the possibility. The guy was using a mifi in I think the UK and the other guy was in the states. It was possible but it had hiccups. I have not seen a wifi to wifi in two different countries as of yet. But the mifi to wifi in two different countries yes. The study was done to see why Face Time was not available when using 3G service and it clearly showed it is possible because the mifi uses a 3G signal which is translated as a hotspot.....There also may be international laws in certain countries that block it.

Similar Messages

Question about the time calls

Hi, I have iPhone 3Gs and I want to see how many minutes I have outgoing calls because the iPhone has only a total time in which they received calls and outgoing calls. Please, no free APPS, which it calculates?
p.s.: I'm sorry for my english

You know, iphone maybe is the best phone ever... and it doesn't include this very simple feature. Unfortunately the only way to solve this issue is by jailbraiking which is not supported by apple.
I hope (and I really mean it) in the next version apple include that feature which is included in all cheap mobiles.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

HT5463 Questions about the "Do Not Disturb" feature not addressed in documentation

Hello,
I have some questions about the "Do Not Disturb" feature which are not quite addressed by the documentation.
When DND is enabled, will badge app icons still be displayed?
When DND is turned off, either manually or automatically, will Notification Center banners be available for alerts which occurred while DND was on, or are they lost forever?
I guess the main questions is, is DND like an answering machine, which stores up your notifications until you are ready to deal with them? Or is it a return of the "turn off all notifications" feature that existed in iOS 4, albeit in a more evolved form?
Thanks,
- Steve

If you have a schedule set, but activate it manually, it will de-activate at the scheduled time anyway. It behaves perfectly on my 4S, my wife's 4, and both of our iPads.
If you have an iPhone 5, it could be tied to the known issue with automatic time set going Wonky on LTE networks. If that's the case, try disabling the automatic time set and see if it behaves itself.

Question: about accessing Nik collection through Lightroom

I have recently purchased and installed Nik collection. I have no problem reaching the plug-ins in Photoshopbut can't in Lightroom (except for HDR)

Thanks! Technology senses my fear and always makes it difficult for me! Ha! I can use the Nik programs so if I have to, I'll work on them there.
Date: Sat, 13 Apr 2013 16:27:45 -0700
From: [email protected]
To: [email protected]
Subject: question: about accessing Nik collection through Lightroom
    Re: question: about accessing Nik collection through Lightroom
    created by trihelm2 in Photoshop Lightroom - View the full discussion
I suspect there are potential issues on some systems with the Google "combined" version, when I installed it I had recieved a copy of the Google complete version free because of my purchase history. I was advised that I could install over the Individual Plugins I had. I never got as far as trying it with Lightroom, only in Elements. The plugins appeared but the load times were abysmal and I mean realy bad , far longer than the Nik individual Installs, so I dumped it and reverted to the originals. Pity cos I wanted the Sharpen Plugin that I have'nt got. After reverting all was back to normal The Nik individual Plugins load very quickly. It was this that convinced me there is a difference in the Google setup.There are people on here with far more knowledge than me, hopefully one of them can help you, alternatively you might try asking Google for help with this.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5232723#5232723
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5232723#5232723
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5232723#5232723. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Get info about the current call

I need a solution (eg ANE) for information about the current call - event of success, of duration, of ending.
Is that possible?

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

SUP - 2 questions about the CDB (cache database)

Hi,
I have 2 questions about the cache database and the cache groups:
1 - How does the "On demand" cache group policy exactly works? I know that online cache group is without storing any data on the CDB making direct requests to de backend from the device, the DCN is based on updating from the backend, the scheduled is based on a time period, but I don't understand how the "on demand" exactly works, and why it has a time period too.
2 - Is it possible to query the cache database table to check the data that SUP has stored? How can I do this?
Thank you!

I posted a similar question in SUP Apps project not too long ago and Paul Horan provided this useful reply:
Create a "Sybase ASA v12.x for Unwired Server" connection profile in the Enterprise Explorer. I named mine CDB.
: Host = localhost (or whatever the machine name is)
: Port = 5200
: Database name = "default"
: User Name = "dba"
: Password = "sql"
Obviously, change the userid/password to match, if you changed them during install time.
Connect, and you'll see the "default" database displayed.
Navigate down through the Tables folder, and the first subfolder is labeled something like [#should_delete_sk ...] Start there.
You'll see a bunch of tables with the naming convention "D1" + package name + package version + MBO name. These are the cache tables for the MBOs.

Question about the function module (RFC_READ_TABLE)

Dear everyone
Could I ask you a question about the function module (RFC_READ_TABLE)?
I was asked if it's possible to create a report which compares the data between different SAP systems (both production systems).
Now, the easiest way would be to use the function module (RFC_READ_TABLE) within a SAP infoset query (SQ01 type query).
But I heard the rumor that using the function module (RFC_READ_TABLE) is not advisable due to the security reason.
However, I am not exactly sure what sort of security problems this function module can possibly have...
Would you help me on this?
I also would like to know if using "remote enabled module" type function module can always overcome this possible security issue.
Or, are there any points that I need to be careful about even when I use "remote enabled module" function module?
Thank you very much in advance.
Takashi

Dear Fred-san
Thank you very much for your support on this.
But, may I double check about what you mentioned above?
So, what you were mentioning was that if some user executes the query with
the function module (RFC_READ_TABLE), under the following conditions, he can access to
the HR data even when he does not have the authorizations for HR transactions?
<Conditions>
1. the user has the authorization for HR database tables themselves
2. RFC_READ_TABLE is called to retrieve the data from HR database
<example>
Data: LF_HR_TABLE like DD02L-TABNAME value 'PA0000'.
CALL FUNCTION 'RFC_READ_TABLE'
   EXPORTING
    query_table                = LF_HR_TABLE
TABLES
   OPTIONS                    =
   fields                     =
   data                       =    .
But then, as long as we call this function module for a non-critical tables such as
VBAP (sales order) or EKKO (purchase order) within our query, it wouldn't seem to be
so security risk to use RFC_READ_TABLE...
Besides, each query (infoset query) has got the concept of user groups, which limits
the access to the queries within the user group.
※If someone does not belong to the user group, he cannot execute the queries within that
   user group, etc
So, my feeling is that even infoset queries does have authorization concept...
Would you give me your thought on this?
I also thank you for your information for SCU0.
That is an interesting transaction
Kind regards,
Takashi

Muvo V200, question about the play m

Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
Thanks
(sorry if I don't speak english very well, but I'm french )

Hi!
To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
Hope that helps!
x

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Questions about the T410s

Hey guys,
I'm considering buying the T410s because my last laptop was a Dell XPS and the GPU burned down after two years. I am a college student and I use my laptops quite extensively for homework, flash games, TV and movies. And I have a couple of questions about the T410s.
1. Due to my previous experience with my Dell XPS, I am looking for a more reliable laptop. So would I have to worry about the T410s heating up/burning down or breaking in like two years?
2. I am not much of a gamer, but enjoy videos sometimes. Will the Intel graphics card be able to run 'not so intense' games like Starcraft 2?
3. Also, would the 4gig of RAM be sufficient to run the Windows 7 64bit smoothly or I should choose the 32bit instead?
Thanks!!
Solved!
Go to Solution.

1) your Dell XPS used the Nvidia GPU? That won't happen in the new T410s.
2) the Intel 5700 MHD GPU can handle 1080p easily, but games like Starcraft 2 may only played on low to med settings.
the Nvidia GPU Optimus GPU option would allow 4 LCD support through the dock, if you ever want to connect that many LCD in the future.
3) 4 gigs is fine for 64 bit OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

A question about the face call through wifi

Similar Messages

Maybe you are looking for