A question about Tokens and comparing sets of nos.

Hi, I'm writing a lottery game that places peoples name and number choices in a file in the format -
Surname_A/1/2/3/4/5/6 (these are example numbers) -
and I've got the code to write these to the file, I've got the code that produces 6 random numbers (results). I want to read the file using the / as the delimiter and then compare with each of the results to see how many numbers match. I want to do this using StringTokenizer (I think) but I can't get it to work. (The operation takes place when the button is pressed <button6> and writes to the file "winners") Does anyone have any ideas? I'm very new to this game and I realise I may be going about this the wrong way.
code(sort of)
void button6_actionPerformed(ActionEvent e)
try
FileReader file = new FileReader ("C:\\Lottery/entries");
BufferedReader inputFile = new BufferedReader(file);
FileWriter file1 = new FileWriter ("C:\\Lottery/winners" , true);
PrintWriter outputFile = new PrintWriter (file);
line_of_data = newStringTokenizer(inputFile.readLine());
winCount = 0;
while (numberOfTokens !=0)
String name = line_of_data.nextToken("/");
etc...
Thanks.

What you haev to do is construct your string tokenizer passing a string of delimiters as the second argument.
String tokenizer st = new StringTokenizer(xxx, "/");
I'm sort of curious about how you are planning to check for end of file, given the way you are reading input.

Similar Messages

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Question about RAC and ASM

Hi,
We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
I'm a newbie to RAC and ASM..
Thanks,

user4866039 wrote:
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
Bjoern

Questions about OC and upgrading my 790FX-GD70

Hey Guys,
So Ive had this board for a while now (790FX-GD70) and am looking to throw some new parts on it, I want to throw the 1100T CPU on there (Unless MSI wisens up and enables AM3+ like they did for other boards) and was to throw in some 1600 or 1800 ram, Ive got a couple concerns though.
1. Ive never updated the bios on thsi board (I think its 3.04), frankly Im not a huge fan of doing it and avoid it unless I absolutely have to, will I need to update the bios to throw in a thuban?
2. The boards specs say that the board supports 1600/1800 member but only OC'd, so that means I need to OC the FSB right? But Im not sure how much overclocking this boards FSB can actually handle, if Im not mistaken for 1600 it will need to be 2400-2600 and even higher for 1800 memory. Can the board handle it? Will I have some major FSB heat issues?
2a. What do I need to overclock? Do I need to increase the bus speed or the fsb multiplier? What voltage do I need to set for the FSB at thoes speeds?
2b. Bus speed affects cpu clock as wel ldoesnt it? so if I boost the bus then do I have to throttle back the multiplier?
My goal is to have the 1100t running at around 4gz and the memory will either be 1600 or 1800, it depends what I find with good timings at a decent price.
Thanks guys!

The Guide will come in handy. I have an 790FX-GD70 that I have done plenty of OC settings with my original Phenom II X3 720BE, and now my X6 1090T.
Overclocking is a trial and error project. When you get a better understanding about the effects of Overclocking you will learn that it's about stability with an overclock, and not setting records. Well.. unless record setting is a part you want to play with. Stability.. there are programs to test you overclock. Many of them, some available here in downloads. Prime, Futuremark, OCCT.. choices to help you test for stability. Play safe, step by step.. that way you avoid damaging your system. There are a lot of Overclock examples on the net. Search the board and overclock. The board is now a couple of years old.. but it was a hot.. overclock board. You can find it even with your CPU as examples to learn from.
Here's one for you.. you'll learn! You stated 1600-1800 memory speeds. OK, it's an overclock. But, the question is? Do you get a gain? Is 1800 really quicker than 1333? The number is bigger. 1600, or 1800 is bigger than 1333, or 1066. So, it must mean it's better and faster, right? Well.... if you compare reads and writes between 1333 and 1600 the gain is little or none. There are different CPU crunch uses. Like burning video or playing a game. Different demands, different setting results. The AM3 CPU is made for 1333. In some Overclocks because of timings... 1066 could offers quicker results than 1600. It's trial and tests. Not just CPU but Memory and more make an Overclock. Welcome to Overclocking. It's fun and done within limits... you will get more out of what you have. Me.. my best Overclock to date? Results I see from my 790FX-GD70? I have run 3.8 stable... and my SSD's are a better OC than tweaking my speeds. Both together... I have amid OC and am very happy.
Good Luck

Question about printing and sorting files

What I'm trying to do is read in a file of names (about a thousand) sort them using a sort alorithim then print out the sorted file of names, as well a separate chart with the number of compares and swaps . My Sort class has different sorting algorithims, like insertion, bubble etc. Everything I have now works fine. But the way its set up now I have to pick one algorithim at a time, then it sorts then prints the results like this:
Bubble Sort
Compares : 2016
Swaps : 1052.
Now if I want to choose anothert algorithim, I'll have to manualy do that then run Main again then apend the results to the output file. But I would like run Main once opening the file that needs to be sorted then run one algorithim, calc the results, then do that again for another algorithim calc the results, then when I'm finished with all the algorithims, print all the results at once to the output chart. This so the output will look better, and the user won't have repeatedly run the program to see and compare the results.
Is this even possible, and if so, any ideas how?
This is the main console, which put the names in a array list, then sorts
them
public class SortyFile {
     public static void main(String[] args) throws IOException{
           BufferedReader r = new BufferedReader(new FileReader("C:/Documents and Settings/Cougar/" +
               "Desktop/names.txt"));
           PrintWriter Output_Chart
                = new PrintWriter(new BufferedWriter(new FileWriter("C:/Documents and Settings/Cougar/" +
                  "Desktop/Output Chart2.txt" , true)));
           PrintWriter Output_Sorted_File
                = new PrintWriter(new BufferedWriter(new FileWriter("C:/Documents and Settings/Cougar/" +
                       "Desktop/Sorted File2.txt")));
           ArrayList a = new ArrayList();
           String line = null;
           while ((line = r.readLine()) != null)
                a.add(line);
                Sort.bubbleSort(a);
              Output_Chart.println("");
              Output_Chart.println(Sort.algoname);
              Output_Chart.println("");
              Output_Chart.println("Compares :" + "   " + Sort.compares);
              Output_Chart.println("Swaps :" + "      " + Sort.swaps);
              Output_Chart.println("");
              for (int i=0; i<a.size(); i++){
                   Output_Sorted_File.println(a.get(i));
                   System.out.println(a.get(i));
           Output_Chart.close();
           Output_Sorted_File.close();
This is the class with different sorting algorithims, the variable algoname is use for printing the header on the output chart.
public class Sort {
    static int swaps = 0;
    static int compares = 0;
    static String algoname; // name for the algorithim
    public static void swap(List data, int least, int i) {
          Object tmp = data.get(least);
          data.set(least, data.get(i));
          data.set(i, tmp);
     public static void bubbleSort(List data)
        for (int i = 0; i < data.size(); i++)
            for(int j = i+1; j < data.size(); j++)
                Comparable current = (Comparable) data.get(j);
                Comparable previous = (Comparable) data.get(i);
                compares++;
                if (current.compareTo(previous) < 0)
                    data.set(j, previous);
                    data.set(i, current);
                    swaps++;
        algoname = "Bubble Sort";
      public static void selectionSort (List data)
           int i,j, least;
           final int size = data.size();
           for (i = 0; i < size - 1; i++)
              for (j = i+1, least = i; j < size; j++)
                   compares++;
             if (((((Comparable) (data.get(j))).compareTo(data.get(least)))) < 0)
                  least = j;
                  swap(data,least,i);
                  swaps++;
           algoname = "Selection Sort";
      public static void insertionSort (List data)
             Comparable tmp;
          int i, j;
             for(i = 1; i < data.size(); i++)
                  tmp = (Comparable)data.get(i);
                   for(j = i; (j > 0) && (tmp.compareTo(data.get(j - 1)) < 0) ; j--){
                   compares++;
                   data.set(j, data.get(j - 1)) ;
                   data.set(j, tmp) ;
                  swaps++;
             algoname = "Insertion Sort";
}

Maybe Im misunderstanding your question, but couldnt
you just run the bubbleSort() method, then the
insertionSort() method, and so on? You would do this
in your main method.Yeah I tried that but for odd reason I get this for the results
Bubble Sort
Compares : 2016
Swaps : 1052
Selection Sort
Compares : 2016
Swaps : 1052
The results for both algorthims are exactly the same.

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Questions about Contracts and New Phones

I've had some questions about how upgrading and adding new lines to a contract works and I haven't been able to find the answers through Google. First some background information: We started this most recent contract in September of 2011 and as such the current contract will end September of 2013. According to the phone information portal, all three of the devices on my account will be eligible for an upgrade this Saturday (May 4th, 2013). My daughters birthday just so happens to coincide with that date and as such we were planning on surprising her by taking her to buy a new phone and we are going to allow our son to upgrade his phone as he has been asking to for a while.
Is there any way of locking/limiting the amount of data allowed for each phone on a shared plan? I'm worried that my daughter will go way over our limit and not pay attention to the point where she will end up costing us a very large amount of money
Does adding a new line require the start of a new contract?
My son was interested in purchasing the "Samsung Galaxy S4" and has noticed that pre-orders for that phone are currently available. Is it possible to pre-order the phone on that date using the upgrade so that the price will be reduced?
If the answer to number 2 is a no, does adding the new line take away the upgrades from other phones or would he be able to go to the store past the release date and upgrade then?
Thanks for taking the time to read through all of this. Any help that I receive will be extremely appreciated.

1. Yes. There is an additional fee per line you wish to do this for. When you add the line you can choose this option and set the data amount it is allowed to use.
2. Yes. Each line is a separate contract with its own expiration date.
3. The contract starts when you sign up for the contract. The amount will be pro-rated on the plan if it is not started until part-way through your billing cycle that is what you are asking. Doing the pre-order just guarantees you the phone in case they sell out.
4. No it will not take any upgrades away as each line has its own termination date. You can move upgrades around between lines though.

A Question about RAW and Previews

I have just recently starting shooting in RAW (mostly for the post production editing abilities - I am an avid amateur photographer bent on learning as much as I can). I set my camera to capture in RAW + L. I don't know why I feel like I want it to capture both the RAW and JPEG file, and thus leads me to my first question: Is it necessary to have the camera capture both the RAW and Large JPEG? I am assuming the answer to be no, as I am sure if after importing the RAW file into Aperture, you could always export a JPEG if you wanted one? So no need to fill up your internal memory (if using managed masters) with the extra JPEG? Is this thinking correct?
Next, if you do import RAW-only files and then want to export certain images, do you have a choice to export the original RAW image? It seems that it only allows you to export a JPEG Original Size. To answer my own question, perhaps you have to export the Master in order to export the full RAW file when exporting? If you want to export a JPEG, you have to export not the Master, but a version of the Master? Is this correct?
Lastly, I wanted to ask a question about Previews. I have my preferences set so that previews have the highest quality with no limits to size. What is the significance of setting it this way? I just assumed that if I wanted to share an image at the highest quality without exporting it, this was the way to go. Is there any validity to this? The reason I ask is that I don't want to have all of these high quality previews taking up internal disk space if I really don't need to. Is there a way to change the preview size once previews are created? Meaning, if you have it set to generate low quality previews, can you change it dynamically to high and vice versa?
I know this is a lot in one post. Thanks for tackling it.
Mac

You can change the quality of the Previews in the Preferences -> Previews tab.
You can regenerate Previews with the Delete and Update Previews under the Images menu.
Regards
TD

A question about Tokens and comparing sets of nos.

Similar Messages

Maybe you are looking for