A question about tracing users' connections

Dear all,
I would like to know, whether there is a report in SAP
providing information about users connection. What we
are looking for in terms of information is:
1) How many times each user connected to the system?
(for example how many times during each day or each week)
2) How long each session lasted?
3) What standard transactions did each user execute during
each connection?
Is there any report providing such information?
Thanks in advance,
Kind Regards,
Dariyoosh

Hi Dariyoosh,
1) How many times each user connected to the system?
SM20 (Information security audit logs ) In USER Statistics and Terminal statistics , you can get enough information .
ST03N
In ST03N (Workload distirbution monitor ) you can find ,what is the workload of individual users and which actions users performed ?
2) How long each session lasted?
In tcode - SM20,you can find detaild activites about users in Users statistics field . Secondly For transcation details ,Please select Transactions statisitcs field .It
will provide you enough information
AL08 Shows you Tcodes using by user time ,external & internalsessions .Also with tcode SM04 You can find list of users .There is USER TAB on top left hand side
You can click on that and select " Techincal Information , you will get informatoin STATE , MODES ,MEMORY COnsumption etc .
3) What standard transactions did each user execute during
each connection?
Pleae use these tcodes :SM20, SM04(users overview) , AL08
Thanks in advance,
Kind Regards,

Similar Messages

Question about SAP_R3_SelfServiceGenerics - JCo Connection

Gurus -
I have a question about configuring the JCo connection for SAP_R3_SelfServiceGenerics...
Should this JCo connection point to the R3-HR server, or the R3-Financials server?
It seems like some self-services are HR-related, while others are more financials related?
So, if you connect the SAP_R3_SelfServiceGenerics to the HR server, then how do Financials related requests get handled? Is there linkage between HR and Finance?
Or am I completely not understanding how Cross-Application Components work?
Also, do ISRs (Internet Service Requests) get handled through Self-Service?

Hi Eric,
my SAP release is 4.7 ext. set 1.10.
From chapter 5 on SAP note 1409608:
5 Configuration requirements
For productive SAP systems
- All SAP applications that are based on SAP NetWeaver '04 SR1 (kernel 6.40) and higher are supported for productive use as
long as you have implemented enhanced monitoring for virtualization. Check the requirements and minimum support
package levels mentioned in Note 1409604 for the activation of the enhanced monitoring.
If I understand SAP support only release NetWeaver '04 and higher, then from SAP Basis 6.40.
My SAP release have SAP Basis 6.20 so it does not supported.
Is it correct what I wrote above?
Thanks
Moreno

Question about Java MySQL connection

Hi guys, greetings to y'all, me name is Ryan, I'm new 'round here.
I have some questions, I have some application that I build with Java and using MSSQL Server 2000 as it's database, and now I want to try to use MySQL as it's database. I use MySQL server 5.0 and Navicat 8 for MySQL for the gateway and Win XP SP2 as my OS, what I want to know is, can you guys give me some connection string example for MySQL, for Java that is, I'm still learning in Java so sorry if I have some mistaken languages or code related words. Thanks a lot guys.
Best Regards.

Hi zahid, thanks for the reply, so if I have this code, like this one
try
                              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                              Connection con;
                              con=DriverManager.getConnection("jdbc:odbc:FlightSource","","");
                              stat2=con.prepareStatement("insert into Passenger_Table(vPassenger_Name,vPassenger_gender,iPassenger_Age,vPassenger_Destination,vPass_FlightClass,vPass_FlightType,vDate_of_Issue,vDate_of_Departure,vDate_Expire,vForm_Payment,Card_No,vTotal_Price)values(?,?,?,?,?,?,?,?,?,?,?,?)");
                              stat2.setString(1,textNama.getText());
                              stat2.setString(2,(String.valueOf(entry2)));
                              stat2.setString(3,textUmur.getText());
                              stat2.setString(4,textTujuan.getText());
                              stat2.setString(5,(String)comboKelas.getSelectedItem());
                              stat2.setString(6,(String)comboJenisKeberangkatan.getSelectedItem());
                              stat2.setString(7,(String)comboTglTiket.getSelectedItem()+"/"+texttgltiket1.getText()+"/"+texttgltiket2.getText());
                              stat2.setString(8,(String)comboTglBerangkat.getSelectedItem()+"/"+texttglberangkat1.getText()+"/"+texttglberangkat2.getText());
                              stat2.setString(9,(String)comboTglKadaluwarsa.getSelectedItem()+"/"+texttglkadaluwarsa1.getText()+"/"+texttglkadaluwarsa2.getText());
                              stat2.setString(10,(String)comboPayType.getSelectedItem());
                              stat2.setString(11,textCardNo.getText());
                              //stat2.setFloat(12,Float.parseFloat(textHarga.getText()));
                              stat2.setString(12,textHarga.getText());
                              stat2.executeUpdate();
                              JOptionPane.showMessageDialog(null, "The Data has successfully Booked " );
                         catch(Exception exception)
                              JOptionPane.showMessageDialog(null,"Error encountered while entering data in the database: "+exception);
                         }I just simply change the Class.forName{} line right ?
What About the database name, considering in the code above I used ODBC (the ODBC name is FlightSource), so the database was configured when I create the ODBC, then how about MySQL, should I create ODBC too to configured the database that I wanna use ?

Questions about forms users once the form is completed

I am on a Macintosh platform, OX 10.5 (Leopard), using Adobe Acrobat Professional that came with CS3 (version 8 I believe - I am not in front of that computer at the moment). I have creted a few forms in LifeCycle, but now my boss wants this to be completely Mac so Monday I need to start creating them in a Mac. I know the basics of how to create a form from a pdf file.
Here are my questions:
1 - Acrobat 8 is so old I can't find any help information in the Adobe help section. Everything that says version 8 takes me to X or XI when I click on the link. Does anyone know where I might find some help with this version?
2 - How do I create a form that the person using can save with the data, the completed fields, so they can open it again and look at what they filled in?
3 - As a corrollary to number 2, how can we also get the data?
4 - We want to take a booklet that has been paper up to now, create a pdf, and then number them to sell for one use only. Is there any way to make a form one-time-use only, so it can't be passed on to someone else to also complete?
I appreciate any help I can get. Thank you.

2. You need to apply the Extended Reader Rights. In version 8 I believe it was under the Advanced menu.
3. The users can submit the file back to you in various formats, such as PDF (the entire file), FDF, XML, etc.
You can add a submit button to the file that will help them do that, or they can just do it themselves.
4. Impossible, unless you use some kind of DRM technology, but those are extremely expensive.

Question about macbook air connecting to the tv

Hi there,
I have a macbook air and a non-HDMI tv I recently procured from Goodwill. What do I need to buy in terms of cords, etc... to connect my Mac to my tv?
Thanks!

You should also ask this in the MacBook Air forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_air

Questions about Mobile User accounts

I'm having some trouble fully grasping Mobile User accounts and hoping someone could clarify whether they would be appropriate in my situation.
We have some non-"mobile" users that solely use one machine and we would like them to continue to use their local hard drives. Is a "Mobile" account the solution?
Second, if a user is already using an independent Mac that is not bound to any server..is it possible to bind it, create a mobile account, then sync local with network home folders such that all of the current data in their existing Home folder is added to the Network Home folder? or must the account be started from scratch?
Lastly, What if we did not want all that data synched to the Network Home because there is simply too much of it. Can we still enjoy the benefits of Network login while certain files are local (I assume this is what the synching prefs are all about?!?) Users use same machine for 99% of their work. only occasionally would it be nice to provide them access to their mail, etc from a different client
PowerMac G4 Mac OS X (10.4.4)

I'll take some broad swipes at this and let the smarter people come fill in the details.
We have a true 1:1 setup in our office and have moved to PHDs as a means of protecting against downtime. The thinking is that we will have a spare machine lying around with our base installation ready to go. If a user's machine fails we'll replace it with the spare machine, let it sync the user directory from the server, and we're back in business. It's no substitute for a real backup system, but it potentially avoids having to run a restore from your backups. It also reduces network traffic compared to plain networked homes, and still lets your users work if the server goes down, but provides the benefits of centralized management. John DeTroye wrote a nice article about this.
If you've already got data on your "client" Mac you will need to move it onto the server. PHDs will download data from the server to the client on the first sync, but will not upload a complete home directory from the client to an empty directory on the server. You'll find some posts in this forum discussing how people have gone about migrating data prior to that first sync.
WGM allows you to establish exclusions for stuff you don't want to sync.
One thing to watch out for in the scenario you describe is the so-called "rabbit effect." Assume Bob uses Mac1 as his primary machine. If one day he logs into Mac2 his home directory will be downloaded to Mac2. Once he returns to Mac1 he'll still be cluttering up Mac2 with his data. If he logs into Mac3 the next day and Tom and Sue are also periodically logging into different machines, you can see how you'll end up with a mess pretty quickly.
Hope this helps.

[SOLVED] Question about systemd-user-session

Hi!
I'm trying to setup a systemd --user session (using user-session-units and xorg-launch-helper from aur).
I have a couple of questions; this is my .xinitrc now:
#!/bin/bash
export BROWSER=chromium
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
spacefm --desktop &
compton -cGCf -m 0.9 -i 0.8 -D 5 --shadow-exclude 'g:e:Conky' &
volumeicon &
/home/federico/Script/touchpadoff_onboot.sh &
#connman-ui-gtk &
/home/federico/Script/calised-script &
dimdaemon &
tint2 -c .config/tint2/dragonauta.tint2rc &
conky -p 5 -c Script/conky.conf &
exec openbox
1) is "if" statement required when using systemd-user-session? And if yes, how can I reproduce it?
2) "conky -p 5 " will wait 5 seconds doing nothing. Will this mean that other .service will wait for it to finish? (i guess no, since they're executed in parallel).
3) how can I export "chromium" as my default browser?
Thank you very much!
Last edited by nierro (2013-04-06 17:56:17)

I followed everything in that wiki, and in KaiSforza and sofar github page.
I finally managed to get my old method (autologin to vt and autostart x) to work together with systemd --user: i put in .xinitrc "systemd --user" and deleted everything else.
So, my .config/systemd/user/ works. The problem is in the [email protected], i guess. I configured it like wiki says, mind to post here your /etc/systemd/system/[email protected]?
Thanks.
EDIT: here it is my [email protected]:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
[Unit]
Description=User Manager for %I
After=systemd-user-sessions.service
# This is needed for folks running Xorg on vt/1
Conflicts=[email protected]
[Service]
User=%I
PAMName=login
# Note memory:/ required kernel memory CGroups support
ControlGroup=%R/user/%I/shared cpu:/ memory:/
ControlGroupModify=yes
Type=notify
TTYPath=/dev/tty1
ExecStart=-/usr/lib/systemd/systemd --user
Environment=DISPLAY=:0
Environment=XDG_RUNTIME_DIR=/run/user/%U
Environment=DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/%U/dbus/user_bus_socket
[Install]
WantedBy=getty.target
and loginctl says my user has "1000" as UID.
Last edited by nierro (2013-04-05 16:13:14)

A question about logon users

Dear all:
we want to intergrate R/3 and ESS system on Portal.The ITS address is the same.
Everything is ok but one problem:
Our client wants us to use logon ticket to logon the R/3 and ESS system through Portal.The EP users are not the same as R/3 users,but not absolutely different.R/3 users have some prefix.(for example,EP user:delma R/3 system:psdelma).ESS users are the same as EP.
okay,we can change R/3 users. But this is the worst solution. besides this, we don't know how to figure out this problem.
anyone has idea about this,thank you!
Best regards
delma

Duplicate post - also in the forum post I referred to in the previous reply...
According to <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/49ae0771924cf4a1fc7e2af7b2e18c/frameset.htm">this help link</a> you can upload usermapping through the use of a specially formatted text file.
From the help itself:
The following example shows how you can change the user mapping data of an existing user, user2. When you import the data, choose the option Overwrite Existing Data in the import tool.
The user user2 is mapped to the user ID ext_user2 in the system BCE, where BCE is the system alias of the system defined in the portal system landscape.
[User]
uid=user2
$usermapping$:BCE:user=ext_user2
$usermapping$:BCE:mappedpassword=password

Question about how to connect two solution manager

Hello experts
one of our clients wants to connect his SOLMAN to our SOLMAN, that way
when they receive a case in his ICM we can monitor the case and respond
It, if the situation requires or they ask for our help.
Can you please tell me if theres a way to connect them and what is the
best way to do that?
Thanks for your help,
Regards,

You are going to connect a Solution Manager to another Solution Manager, so I think it is enough to use the RFC destination on the connection.
I suppose you want to send a message from 7.0 to 7.1, so you may:
In Solman 7.0 system:
1. T-code SM59   > Define an RFC connection to 7.1 system;
2. T-code ICTCONF   > Add an entry for the 7.1 service desk, specify
the RFC Destination as the one you defined   > Activate -> Generate default value mapping (you may find the button on the top of ICTCONF).
In Solman 7.1 system:
1. T-code SM59   > Define an RFC connection to 7.0 system;
2. T-code ICTCONF   > Add an entry for the 7.0 service desk, specify the RFC Destination as the one you defined   > Activate -> Generate default value mapping;
3. Customize your own value mapping including the transaction type. You will find the details in:
    IMG -> SAP Solution Manager -> Capabilities (Optional)    -> Application Incident Management (Service Desk)    -> External Integration -> External Service Desk
Most fields of SIVA and SMIV are the same (for example, priority) so you do not need to care about the value mapping if you do not have special requirement. However, some fields only exist in SIVA category, subject) and others only exist in SMIV (multilevel categories). You may need to implement your own code according to your requirement.
Thanks
Vikram

CUPS - Question about associating users to lines on phones

Hello all,
We are in the process of migrating to an Exchange e-mail environment and at the same time trying to get everything ready for a CUPC deployment. The CUPS server was set up some many months ago, but still has not been put into production so we are finding things that have been missed and need to be cleaned up before deploying to end users.
The main issue I am facing right now is that not all users were associated to line appearances on their phones. I would have to say maybe 35% of them are set up properly and the other 65% are not associated at all. I am looking for a way to export all the line appearances that do not have users associated to them, but so far I have had no luck. The closest I have gotten is going to Bulk Administration>Users>Line Appearance>Export Line Appearance, but this only shows users that are associated, which is not what I need.
Does anyone know of a way to get this in bulk format? Or if there are multiple exports I can compare with to get what I am looking for?
Also side question: Does anyone know what the Owner User ID on the phone itself is needed for. All I find is that it is for CDR records.
Any help is much appreciated!

The bulk update of line appearances are looking for the following headers at a minimum.
User ID,Device,Directory Number,Partition
The way i would do it is, use Bulk Admin>Phones>Export Phones>Specific Details of all the phones for which the line appearances needs to be updated and add the User ID field and import it back in. Once you export it out, you will have to do some kind of modification of the data to get it in the right format.
The Owner User ID field is used for Mobility option, this field is used when there is a mobility softkey enabled and this User ID is what controls whose Mobility is turned off and on.

Question about Wi-Fi connection speed on Satellite L30

Dear sirs,
I have purchase a Satellite L30 the WiFi card is working fine but the connection speed is 54.0 mbps, i required 100 plus mbps, can you tell me if this is possible to upgrade the internal WiFi card of this laptop and can you suggest at suitable replacement if this is possible.
Your faithfully,
Neil Quinney

Hello Neil
I can not say for sure but I believe at the moment there is no info about compatible WLAN card. If you need precise info about this you must contact Authorized service partner in your country or your local dealer. They are responsible for the upgrade.
Anyway I do not believe you will find compatible card for this low budget notebook model. Simplest solution for you is to buy suitable USB WLAN card. The installation is very simply and I do not believe you will have compatibility problems.
Bye

Questions about the database connection

hi all,
I am developing a project with JDeveloper 10g and I created a database connection to my Oracle RAC database.
However, whenever I start the project with the JDeveloper and I do a "netstat -an" with the command prompt window. I show there are over 100 connection ESTABLISHED to my database. I don't have any idea how this happens. The problem is since there are over 100 connection established, I couldn't run the project with the JDeveloper's embedded OC4J.
Can anyone help me to fix this problem?

I have set the Max connections to 30 in the connection-pool setting of my project in the Embedded OC4J Server Preferences, but it doesn't work.
There are still over 100 connections to the database...

A question about creating a Connection pool that uses Oracle JDBC

Dear all,
I have an issue with creating a connection pool within a web application in order to be used by several servlets. I appreciate if you could kindly give me a hand.
I'm using:
Web server: Apache-tomcat: 6.0.18
Oracle Database 11g Enterprise: 11.1.0.6.0 - Production
Operating system: Linux (ubuntu 8.10)
IDE: Sun Netbeans
Oralce JDBC Drivers: 11.1.0.7.0-Production (ojdbc6.jar and orai18n.jar)
JDK 1.6
Usually, just for creating a connection to my database (without using a connection pool), I proceed in the following way:
String dbURL = "jdbc:oracle:thin:@localhost:1521:database01";
String username = "scott";
String user_password = "tiger";
String userSqlQuery = "SELECT * FROM mytable";
Connection connection = DriverManager.getConnection (dbURL, username, user_password);
Statement statement = connection.createStatement();
statement.executeUpdate(query_text);This works pretty well allowing to communicate with my oracle database. By this method I have run several projects
with different queries (SELECT, INSERT, UPDATE, DELETE ,etc.) and each time it worked without any problem and
returned the result of the query. Therefore I think that there is no problem with JDBC drivers
However, when I want to create a connection pool, it seems that the lookup method cannot locate Oracle JDBC drivers. That is,
try
     InitialContext ic = new InitialContext();
     Context envContext = (Context)ic.lookup("java:/comp/env");
     dataSource = (DataSource)envContext.lookup("jdbc/oracle11gEnterprise");
       Connection connection = dataSource.getConnection();
catch (Exception e)
     e.printStackTrace();
}Just after calling dataSource.getConnection() the java.lang.NullPointerException is thrown.
Any idea?
Thanks in advance,
And for your information, here are context.xml and web.xml files for my project
Here is my context.xml
<?xml version="1.0" encoding="UTF-8"?>
<Context antiJARLocking="true" path="/WebApplication1">
    <Resource name="jdbc/oracle11gEnterprise"
          scope="Shareable"
          type="javax.sql.DataSource"
          auth="Container"
          description="Oracle Database 11g Enterprise"
          maxActive="100"
          maxIdle="30"
          maxWait="10000"
          removeAbandoned="true"
          removeAbandonedTimeout="60"
          logAbandoned="true"
          url="jdbc:oracle:thin:@localhost:1521:database01"
          username="scott"
          password="tiger" />
</Context>my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
    <ConsumeOutput>false</ConsumeOutput>
    <resource-ref>
        <res-ref-name>jdbc/oracle11gEnterprise</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
    

nobody?

Question about multiple users on pc

How do i make the same itunes library available on two users accounts on the same pc that has windows 7?

Copy the iTunes folder to a shared folder (such as /Users/Public/Public Music/).
Hold Shift when launching iTunes and select Choose library and select the iTunes folder in the shared location.

Question about redirecting user when session expires

I have several pages that get and post variables sent to
them. Is it possible to retain these values when the user's session
expires? I want to be able to have the user re-log into the system
and then have them redirected back to the page they were just on
and preserver the get and post variables so that the data on the
page can be rendered back to them

is there anyway to manipulate the headers and store the
information there and still have it accessible if the session were
to time out?

A question about tracing users' connections

Similar Messages

Maybe you are looking for