A question about transport of the change to InfoSet
Hello Expert,
I made a change to the infoSet MMIV03 by Transaction SQ02 and add MKPF-USNAM into the field group INVENTORY MANAGEMENT. Then I clicked Save button, but there is no pop up window to ask me to save into transport. I clicked "Generate" button, and there is no popup window,too. I create a new infoset and the system aslo doesn't ask me to save into transport.
I need to transport the change to testing system, can any expert tell me how to include the change into transport?
Thanks in advance,
Regards, Johnny
Dear John,
try this, when you are in SQ02. Go to SAP Menu "Environment" and then "Transports". Choose "Transport InfoSets" and selects which InfoSets you want to transport. Then Execute with F8.
Regards,
Peter
Similar Messages
-
Another BW question about filter in the query definition
Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu JiaHI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri -
Question about setup_MITE in the PCI-MIO-16E-1
I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.
National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
natinst.public.daq.driver-development.general
Christian
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
A question about some of the features
I have Vista so therefore am unable to use the trial version of photoshop elements. Before I go ahead and purchase the software, I had a few questions about its features.
I'll mainly be using photoshop to create digital scrapbooks. I know that photoshop comes equipped with themes and images, but I would like to know if I can use my own backgrounds and images. If I am able to use my own backgrounds, can they tile?
Another thing I would like to know is if I can create my own projects with custom dimensions.
Lastly, I'll be using photoshop to sprite. Is elements well suited for spriting? More specifically, does it have a color selection/replacement tool?I use PSE for digital scrapbooking. Instead of using the "built in"
creations and albums, just create your own PSD files with layers of
whatever images/embellishments/background papers you want. You can
specify whatever size of creation you want when you create your PSD file
(you only have the choice of certain sizes when you use the built in
stuff).
Not sure about what you mean about making your backgrounds tile, but I
think it is possible. You can take a "background" paper, do a selection,
and then define a pattern and fill it. Or, if you mean layer your
background papers - yes you can do that too. (Here is my online
scrapbook pages, all of which were done in PSE 4 or 5:
http://www.scrappersguide.com/forums/gallery/showgallery.php?cat=500&ppuser=413)
You can select by color (using the magic wand tool) and you can replace
color, but it may not work exactly as you expect. (I also don't know
what spriting is.) But, many people just use a hue/saturation adjustment
layer to change colors.
-Trish -
Question about X-Fi mode changes and relay clicks
Hello,
I've been having a heck of a time getting my new x-fi elite pro to work nicely in my computer (I have an MSI K8N neo4 platinum -- nforce4 chipset -- I'm aware of the issues). I kept having issues with the mode changer not working right about 50% of the time. Either it would stop recognizing my x-fi, or the SPI process would crash. In either case I could no longer change modes and the external box would stop working until a reboot. I tried many, many PCI slot swaps and driver reinstalls. Currently, things seem to be working ok (at least as far as mode switching goes...ASIO is another story) in that I can change modes without crashes...at least for the last half hour or so.
The only thing bothering me is that now, when I change modes, I almost never hear the relay click. Maybe out of 20 mode changes I get the click. Before, when the mode would successfully change, I'd always hear the click. Now, that's not the case. I'm wondering if the mode changing is really working correctly even though I'm not getting any crashes. So, my question to others is, when you change modes, do you always hear the relay click? I'm trying to get this all figured out before I decide to send it back. ASIO drivers work in creation mode, my cmss settings show up right in entertainment mode, etc...so maybe it's working right. I'm just not sure.
Thanks in advance.Nevermind.... I rebooted for the heck of it. The relays clicked every time until I went into audio creation mode and actually used the ASIO drivers. Then, I tried to switch back to entertainment mode and SPI crashed on me again. I think it's about time to send this thing back, I've wasted about 2 hours trying to get this thing to work right.
Thanks anyway. -
General questions about subscriptions in the context of application exports
Hello,
I have two sample applications (Apex 4.0.2), a "master" one and a "subscribed" one, which has a page template subscribed to a page template in the master app.
Looking at their export files, I see:
- Master app:
-- This is the master template
wwv_flow_api.create_template(
p_id=> 32173830131265449 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',- Subscribed app
-- This is the subscribed template
wwv_flow_api.create_template(
p_id=> 19843209078190645 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_name=> 'Two Level Tabs - Right Sidebar (optional / table-based)',
p_reference_id=> 32173830131265449,
p_translate_this_template => 'N',
p_template_comment => '');
end;A couple questions to help me understand how things work behind the scenes:
- Just out of interest, in the subscribed app export shouldn't it be p_reference_id=> 32173830131265449 + wwv_flow_api.g_id_offset to keep things in sync?
- If I export both applications from my workspace, delete them and re-import them (first the master, then the subscribed) the subscription remains valid. On the other hand, if I import them into apex.oracle.com, the subscription is lost. Is this the way it should be? Is there a way to keep the subscription?
Thanks
LuisHi Moni,
In case of business service you are only defining interfaces in integration directory. It can use more then one software component version. You need to transport content in sld only in such case when you have development, quality and production sld.
/wojciech
> Hi,
> When we use Business system, there will be
> corresponding Technical System, and associated
> Products and SWCV. So it is very clear Where to
> declare my SWCV in SLD. And no confusion about
> transporting SLD objects.
> But with Business service, It is not declared in
> SLD, So there is no related Technical System, no
> product. But I need to define SWCV so that i can
> import in to repository to define my design
> objects(DT,MT,MM etc).
> Here are my questions.
> 1. In which Product i need to define the SWCV?
it doesn't matter
> 2. Do i have to have a product associated with every
> SWCV?
actually all swcv should be in some product
> 3. Do i have to have a Technical system when i use
> Business service?
no
> 4. How do I transport SWCVs from dev SLD to TEST SLD,
> without Technical system and Business System?
I don't know.
> 5.Do i need to transport the SWCVs from dev SLD to
> test SLD as it working fine without doing SLD
> transport?
>
In my opinion you have to. But the best configuration is only one sld for whole landscape than you don't have to transport it.
> Thankx
> Moni
<i>** Please reward points if found it useful **</i> -
as per the question, tried to up the cache from 75meg to 300meg but it resets after i restart firefox, have tried to change to various cache sizes but to no avail.
-=EDIT=-
it must be something to do with the profile, as when i set up a new profile in the manager, the cache size problem no longer appears. but now, how to repair my profileok, nothing in that text file helped but the original file that it was based on pointed me in the direction that it might be an extension. The only extensions i have are NoScript and FasterFox Lite version....
I have now traced the fault to lie with FasterFox... if you are not familiar with fasterfox it speeds up internet connections in firefox... several of the options are presets... but when i selected custom it gave me the option of a cache setting, which was set to 75megs.
I have now changed that cache setting in fasterfox to 300 Megs and it is now persistant in firefox on restart.
hopefully this information will be helpful to other people in the future that suffer the same problem.
Thanks for your help TonyE, its greatly appreciated -
Question about transport layer
Hi folks,
I would to know if anyone has some information about transport layer between two tenants, eg: Test Tenant and Productive Tenant.
I suspect that deployment on Productive Tenant requires manual deploy with HANA Studio (or eclipse + hana cloud platform plugin).
Thanks in advance!
Kind regardsNo, there is no such transport system in HCP. Actually, you've probably noticed that we don't bind you to a particular DI (development infrastructure) - e.g. it's up to you to choose what version control system suits you best - be it Git, CVS, SVN, Perforce...
For Java apps - hope I already answered your question above.
For XS apps - AFAIK, you have to import your sources into a HANA repository package and activate them.
HTH!
--Vlado -
Hi,a question about transportation of translation of selection screen?
Hi Experts,
I am working on an ALV and there is a selection screen for it, and I have translate the texts in the selection screen and can they be transported while the program is transported to another system? if not how can I transport the translations, thank you much.
Kind regards
DawsonHello ,
Please follow the below steps for transalation ..
- Complete your development and release the same .
- Always have the Translations which u can do wtih SE63 tocde and have them within a specific transport request (Recomended Transport of Copies) .
Now u release the TR of translation then everything wil work fine .
Ensure always Translations TR is younger than Development TR withrespect to their creation and Releases ....
Regards, -
Questions about authorizations of tables/change requests/badis/locks/lang
Hi ,
Few questions I have not been able to find out .
1) HOw can we ensure that every time we do any change in a table including adding/changing content a change request is generated .Basically to ensure any changes being done are being stored in a change request .
2)How to give authorizations to/for a database table ?
3)can/how we add water marks in scripts and smartforms ?
4) Can we create and place our own BADIs in SAP standard code?
5)different LOCK types/categories with clear difference (not the standard SAP help please..)
6) tips on handling two table controls on one screen.
7) WHat are the things required if we want to use objects(scripts,texts,smartforms) in different languages ?
8)multilingual scripts ?
9) how to have a search help in module pool without using Process on value request ?
Moderator message - Please - one question per thread and please ask a specific question - post locked
Edited by: Rob Burbank on Dec 3, 2009 4:29 PMFSKB G/L Account Posting
this transaction is not working -
Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.Hi Haiyang,
Your questions are not covered by the Open Specification documentation and this is documented in [MS-OXWSBTRF] — v20141018 section “1.3 Overview”.
The upload and export data stream is an opaque format that only needs to be understood by a server implementation. The client only serves as a repository for the opaque data stream so that it can be uploaded to the server at
a later time.
You made good progress in interpreting the buffer using other documents. Why do you need to be able to parse the data? Please describe your project in details and I might submit a suggestion to document the layout of the data stream,
if your project justifies it. You can send the description directly to me.
Thanks, Vilmos -
Hi, all.
First, I want to construct a fast transfer stream by programming not using the export item's stream and to import the stream to the folder by posting import request in EWS.
So, I export the item by EWS and investigate the exporting stream's struct by reading the [MS-OXCFXICS].pdf. And I can parse each MAPI property, marker, meta-property from the stream.
I find that the stream is made of many pages, most page's length is 0x7BC0, some are less then 0x7BC0. And in the previous section of the stream, there are some configurations. So the questions are:
1. What is the paging rule? or What is the principle of the paging? Whether a complete propvalue/marker(ref from [MS-OXCFXICS].pdf) must be contained in a page except some binary type?
2. Why the page's binary length is 0x7BC0? Or where is the configuation about paging length?
3. The stream is made of the FXOpcodes and the subbuffer about the FXOpcodes, and I find the mean of the FXOpcodes:
internal enum FxOpcodes
None = 0,
Config = 1,
TransferBuffer = 2,
IsInterfaceOk = 3,
TellPartnerVersion = 4,
StartMdbEventsImport = 11,
FinishMdbEventsImport = 12,
AddMdbEvents = 13,
SetWatermarks = 14,
SetReceiveFolder = 15,
SetPerUser = 0x10,
SetProps = 0x11
and in the stream there are 4 part(after I parse the stream):
A. OpCode:Config, value:0000000001000000
B. OpCode:IsInterfaceOk, value:010000000703020000000000C00000000000004600240080
C. OpCode:TellPartnerVersion, value:000F91838417
D and follows is: OpCode:TransferBuffer, Count:31680
So
a. What is the OpCode:Config value meaning?
b. Some parts of The OpCode:IsInterfaceOk' value is the IID_IMessage("00020307-0000-0000-C000-000000000046"), What is other parts meaning?
Thanks in advance for any ideas.OK. Thank you.
Today I build a stream with a paging rule as below:
1. Keep each page's byte length is 31680.
2. Make sure a complete property value in a page except binary type property whose value length is larger
than 31680.
And it can work very well when import the stream to the folder by EWS. -
Question about shutting down the middle tier while leaving the DB up
Hi,
We just successfully upgraded 11.5.10.2 from running on 9.2.0.8 SOLARIS SPARC 32-bit to 11.2.0.1 SOLARIS SPARC 64-bit.
I am in the process of rewriting the backup scripts. We used to do a once-a-week backup (zip) of the middle tier directories,
after shutting down EVERYTHING cold (MT first, then DB listener, the DB). Our DB consultant likes hot-only backups of the
DB so we are going to keep the DB running all the time and always do hot backups from the DB, but keep MT cold backup.
We want to keep our MT cold backup so we retain our downtime window that users expect (Saturday night - Sun morning).
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up?
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.
MH
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.Hi,
So my question is ---- is there any issue with shutting down the entire MT- only (adstpall.sh) -- but leaving the DB up? There should be no issues.
When I do a adstrtal (via my script) the next morning--- everything should just start fine with no DB bonce having been done, right?Correct.
In the past, once I have the MT down, wait 5 min, kill any stray FND processes, I usually go on to bounce the database
"for good measure". I am 99% sure that I don't have to do this... and that there is no harm in "not" doing this, just need
some confirmation.You still need to wait for sometime for the CM to shutdown, that's all.
One more piece of information - Our concurrent managers shut down cleanly almost all of the time without putting jobs on hold.
We don't have many users (< 60) and while we do have autoinvoice that runs every 5 min, I haven't had to do a big bounce
with cmclean.sql very often-- only about once or twice a year when users lock each others tables and the cleanest fix is to bounce
everything --very rarely.You should be OK with your approach.
Thanks,
Hussein -
Hi all
What is the aproach to transport XI desing , configuration and mapping objects.
If we develop a scenario for a customer in our own XI server and we want to implement it in the customer Xi server after it is finished , then what objects do we have to transport and how we can do it.
what about the tech. and business systems , do we have to create them in the customer machine or just transport them.
thanks.Hi,
After completing the development you can transport the object by 2 way.
1. File Transport method
2. CMS Method
In Integration Repository object:
Right click on the Namespace which you want to send to Quality system and select the export option and export it....this will create a .tpz file on the server following path
usrsap<SID>SYSglobalxi
epository_serverexportsample.tpz
Above file will be copied and pasted in following path
usrsap<SID>SYSglobalxi
epository_serverimportsample.tpz
Similar procedure for directory
Right click on the configuration scenarion in development which you want to send to Quality select the export optin and export it....this will create a .tpz file on the server following path
usrsap<SID>SYSglobalxidirectory_serverexportsample.tpz
then login to the IR of the quality select the Tools ---> Import option you will get this tpz file and import it and activate.
How to transport SLD objects.
Exporting and Importing Technical Systems and Business Systems
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Go through these blogs also.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
HOW TO transport usning CMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Regards,
Sarvesh -
Why can't someone from apple answer my question about upgrading to the current version of Itunes
I am amazed that I have been posting questions for months about this issue and no one has given me an answer!!!! Does Apple not track these discussions?
I have Windows 7 64-bit and am trying to upgrade Itunes to the current version, with no suggestions.
I have found and tried the 64-bit installer and receive the following message:
'This itunes installed is intended for 32-bit versions of Windows. Please download and install 64-bit Itunes installer instead.'
I have itunes 9.1.1.12 currently installed.Okay ... it's behaving just like the PC Mover thing. 32-bit versions of iTunes and AMDS have somehow been jammed on the PC. When you go to uninstall either of them, the 64-bit Windows installer service encounters 32-bit installation configuration information, goes into a fantod, and you get the error message.
So we'd better try clearing away that installation configuration information, and then trying another update.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
Next, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Dunning letters (vs) Invoice (vs) statement In AR
Hi All, The below question relevant to Oracle receivables. What is the difference between dunning letters, Invoice, statement in Oracle Receivables? Any help would be appreciable. Thanks Sai Krishna.
-
This has been really frustrating me today, I downloaded the new version of itunes today and now it seems that my ipod will no longer connect to itunes. when I plug the usb cable into my laptop it recognizes it is there but itunes doesn't detect that
-
Flv odd behavior in swf on web but not authoring
Hi All, I've been building a movie that includes linked flvs animations that were created in After Effects. (I need to export as flv because I need that alpha channel so you can 'see thru' the movies to the content below). These linked flvs are locat
-
Unable to set asset tag number in bios 1.17 on Thinkpad Yoga S1
Hi I have a bunch of Thinkpad Yoga Machine Type 20CD002UUS and I've been trying to set the asset tag in the bios. According to support I can use this tool: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/t
-
Isight not working on intelBased iMac core 2 duo osx 10.8.2
in photobooth, facetime and skype... i got the green light to come on... but no camera is visasble in any application... this is my `1st mac and decided to try one out as im a PC type person.... it does show up in USB system profiler so it sees