A question on the SG 300-10...

I am using the default factory settings on this device. Is this device capable of handing all 10 ports at Gigabit Ethernet at the same time? The reason I ask is because I've experience strange things. Say I am using 6 ports and Gigabit ethernet. Then I connect another computer at port 7 with Gigabit but the send light on top of the port doesn't light up. Almost as if the switch has it's hands full. Then I disconnect one of the other ports, say port 3. Wait a few minutes and then all of the sudden port 7 lights up. Does it only have a Gigabit capacity for 6 ports?
Also, say I assign a computer with a static IP. Everything works, and then an hour later, I switch out that port in back of the switch to another computer with the same IP but obviously a new MAC. Do I need to flush out the CAM tables? Or does it automatically do that? Or am I stuck with that MAC rule until age expires? I have also gotten weird things here. Almost like the switch won't accept the new computer because of the MAC address.
-Tristan

Hi
This switch is a ten port switch. It would be interesting to see the message log or error log of the switch to see if it indicates the problem.
it sort sounds like a wierd autonegotiation issue with the device, taking a while to negotiate and come ready. Maybe have a word to the good crew at the Small Business Support center. via;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Similar Messages

HT204266 How can I find the top 300 games in each category on iPad App Store?

From iPhone Apps Store I could go to each category and find the top 300 games, how could I find the top iPad games in each category in iPad Apps Store? Thanks!

i downloaded it already but it should have the iTunes U App in my homepage as a shortcut. now, it doesn't have this icon in my apps pages. when i need to use it, i have to open the App store and search it out every time. For example, after downloaded the Facebook App, it would have a FB App in my homepage. my Question is I DON'T HAVE THE ITUNES U App IN MY HOMEPAGE NOW. T___T do you have any method to get it in my homepage.
anyway thank you for your link.

Will the Asha 300 receive large MMS texts?

I recently purchased a C2-01 and was disappointed that it was unable to receive an MMS that were over 900Kb in size. I was wondering if anyone knows if the Asha 300 has enogh phone memory or ram to get a picture message from a new iphone or other smart phone. Thank you.

Although this is a valid question, anything above 300 kb is unusual for MMS even nowadays. Therefore, please, let us continue with your original problem …

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

ok, I see you posted parts of your VI in a different location. There is a sub-VI missing though ( Spline Interpolate.vi). But I re-constructed your data and can see the following things:
1 - Your signal has a significant DC-offset (approximatelly 1000) and this will result in a power value for DC of approximatelly 10E6 (though you wrote 10E8 in your first posting).
2 - If you ignore that DC, you can see on the time signal that there is another signal at very low frequency (order of magnitude amplitude = 10, power spectrum around bin 1 = 100) and you are not capturing an entire period of that signal, so either a measurement time of 300 seconds is not enough or this is a signal caused by a drift that you want to ignore.
But overall there is not much sign
al left once you remove your DC and eventually the very low frequency signal. But given your input signal, the power spectrum looks right. Remember also that the DC component will be replicated (with 6 dB reduction) on bin 1 when you apply a Hanning window. Try eventually without the Hanning window (but you'll still have to ignore your DC bin). Alternatively subtract the dc value from your time signal before computing your power spectrum.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Basic Questions on the Syncing Process

I have a couple of questions about the syncing process.
First - does the syncing take place through MobileMe and the so called “cloud” or does it take place through the physical connection of the Touch to the iMac via the USB cable? When I connect the Touch to the iMac, I have
sync Address Book contacts
and
sync iCal calendars checked in iTunes
and there’s a little message in the same iTunes window under Bookmarks which tells me that the bookmarks are being synced over the air via MobileMe. So is the following assumption correct on my part that
Address Book
iCal
are being synced via the physical USB connection while the Bookmarks are being synced over the WiFi connection?
And finally, if I have contacts - let’s call them 1, 2, 3, 4, 5 on the Touch and only 1, 2, 3 on the iMac
what happens with the syncing process? Do the contacts on the Touch get reduced to 1, 2, 3 or do those on the iMac expand to 1, 2, 3, 4, 5 ? The question I guess is what syncs to what? Do changes on the iMac transfer over to the Touch during syncing or does it work the other way too?
Thanks
John
Thanks
John

1) If you have it to sync via Mobileme, then it sync via Mobileme. If you do not, then it does not.
2) It syncs both ways.
http://manuals.info.apple.com/enUS/iPod_touch_3.0_UserGuide.pdf

Questions on the Tungsten C

I am a new owner of Tungsten C. More of a Gearhead than a Techie. So far it works great and does all that I want, still learning the nuances of the machine. Hope this is posted in the right area, but I have a couple if questions.
The SD slot does not recognise that a card has been inserted, is this a format issue on the card, do I need to get a unit specific card ( the card is a SanDisc 4gb) or the slot has an issue?
My main use for the machince is to consolidate all the items I have been carring, i.e day planner, mp3, check registar, and e-book.
Feed back is appreciated.
Thanks
Dave ([email protected])
Post relates to: Tungsten C

dwbell80911 wrote:
Thanks for the info and link. Although the link did not mention the Tungsten C, would it be safe to assume that a 1 or 2 gig SD card would be the ticket.
Also are these older style cards still around and where.
Thanks again, will keep all posted on my continuing adventures in Palm land
I'd be safe and try a 1GB card.
Punching in "1GB SD card" into Google produced almost 5 million hits... Not too hard to find one!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Questions on the ODT Tool enhancements

First of, great job on the ODT. It installed no problem and I like the new query window and the ability to run functions and procdures with test params. A couple of questions on the future of the product:
Are you guys going to be adding more functionality to the query window making it more like SQL*Plus?
Also is the an expected time frame for the PL/SQL Debugger and the .Net/CLR Extensions to the database?
Will there be sessions on the .Net/CLR extension at the upcoming Openworld?
Thanks in advance and keep up the great work,
Al

Are you guys going to be adding more functionality to the query window making it more like SQL*Plus?
Our goal is not to match SQL*Plus feature for feature, no.
If there are features that are missing that you wish were there, let me know.
Also is the an expected time frame for the PL/SQL Debugger and the .Net/CLR Extensions to the database?
PL/SQL Debugger - end of 2005
.NET/CLR Extensions - when Oracle 10g Database Release 2 for Windows ships
Will there be sessions on the .Net/CLR extension at the upcoming Openworld?
Almost certainly... I'll be demoing it at Teched Amsterdam in 3 weeks as well.

Why don't the questions as reported in forms match the order of questions on the pdf form used to collect the data?

I imported a PDF from for my survey. Then, I distributed it. People have completed it and the results have been submitted back to my FormsCentral account. The first two questions are text entry, then there are two 6 option multiple-choice questions before a 3 option multiple choice question. Why is it that in the report gives me results from four 6-option multiple choice questions before the 3-option question when there are only two? To make matters worse, the questions aren't coded with the text of the questions. They're coded cryptically, as are the responses. What the heck is going on and can I fix this?

Drew:
I'm having trouble deciphering what you wrote: "As I said, the initial order seems somewhat arbitrary from the user's perspective." As I work in the political arena, I'm parsing this out. It's either a brilliantly worded "you're screwed" statement, or there is some ambiguity and hope here. Let's deconstruct:
"initial order" Does this mean the order of my questions in the survey? There's nothing arbitrary about them. I know the order of my questions
"somewhat arbitrary" Does this mean there's actually some order to the way the results are being outputted? If so, how do I determine that order?
"from the user's perspective." Is there another perspective from which the actual (original/initial) ordering of the questions can be resurrected?
I'm not trying to badger. That's not my intent. You have a user here who is reading hope from your words, and I'm trying to distinguish between real hope and a nice way of saying "SOL."
So:
Answer One: There is some hope
Answer Two: SOL
After this, I can mark the question. Thank you.
Glenn

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

A question on the SG 300-10...

Similar Messages

Maybe you are looking for