A question over the link between materials and substances

Hello everyone,
As we know, the data of substances in EHS module is connected to the data of materials in MM module.
But If one material is a mixture, and it has several components of substances in it. How can I make several substances connected with one material in SAP release 6.0?
And the 2nd question is:
Is that possible to make one substance identified by several UN numbers?
This is my first time to come here. I really hope that somebody could help me.
Thank you in advance !
Best regards,
Li

Hello Li
regarding your question (hitlist display of more than one UN number per specification) => to my knowledge there is only a "workaround" possible.
As explained by Jayakumar only one identifier per specification can be shown in hitlist. Please take a look in customizing: the number and type etc. of identifer shown in hitlist can be customized. The same is true in properties of type "composition/Spec listing" etc.
This so called "identifier  listing"(Hitlist = D_HITLIST) but it  is very "static" and not dynamic. But even if you enhance the set up a little bit (which can be done using some programming without modification etc.) the restriction is that in the hitlist etc. only one ! identifier will be shown.
But you could program an output variant to do the job.  Using that output variant you could display any identifer which is maintained on the level of a specification. Out put variants are the "standard user exit type" used very often in EH&S to display something (e.g. data maintained on specifciation level) on the screen there no output variant is provided by SAP.
IN higher releases (starting from I believe SAP 2004) there is a new output variant (I believe called SUB_DATA) which can be used as a starting point to create your customer specific variant.
The normal DG SAP data model is like this:
per LS_UN_SUB only one UN Number is maintained. Using EH&S you can later find any real substance which have a "link" to this LS_UN_SUB (there is a standard query available in EH&S to do this research).
May be this helps too.
With best regards
C.B.
Edited by: Christoph Bergemann on Mar 25, 2010 1:33 PM
Edited by: Christoph Bergemann on Mar 25, 2010 1:45 PM
Edited by: Christoph Bergemann on Mar 25, 2010 1:46 PM
Edited by: Christoph Bergemann on Mar 25, 2010 1:46 PM

Similar Messages

  • How to break the link between photoshop and lightroom when saving a photo?

    I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
    I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
    I'm missing something here.
    There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
    Thanks,

    I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
    If my guess is correct, then you just need to set the default profile to be something other than your computer.
    If I am wrong, a screenshot of the error would be really helpful.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Deactivate the link between qualification and appraisal

    Hi expert,
    i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
    After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
    As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
    Anyone knows how to deactivate the link between qualification and appraisal?
    please advice.
    Thanks,
    Liang

    Hi Liang,
    Goto SM31 -> T77S0.
    PLOGI APPRA - make it 0.
    PLOGI QUALI - make it space or 0 A032 Q.
    Try it.
    Regards,
    Dilek

  • What is the link between PO and Requisition in database side

    hello friends,
    please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
    want to know that what is the link between both in database side.
    Thanks in advance
    krish.

    Hi,
    The link is at distribution level, between:
    PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
    and
    PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
    Hope it helps.

  • Establish the link between equipment and its standby equipmnent

    Dear experts
    How to establish the link between equipment and its standby equipmnent in SAP?
    For example, I have one pump in a plant and also i have a standby pump installed next to it...now i would like to establish a relation between these two inorder to track them.
    I tried linking them as subequipments, but logically that is not sub equipment.
    what is the best way to do it?
    Regards

    Praveen,
    Equipment & Standby equipments are  installed on same Function location.
    There are below workarounds for solutions.
    1. Use Position Number
    2. Use A,B,C indicator with Running & Standby status
    2. Use link if it is applicable.
    3. Use classification system & provide characteristic as Running / Standby
    Further u can assign the System condom which is equivalent to equipment running  or stop condition during transactional data creation like order..
    If it is running it indicates it is working.
    If it is in stop condition then at that time it is in standby mode.
    Thanks,
    Ramesh

  • How to customize the link between archivelink and Alfresco

    hi,
    We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
    Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
    my question is how to make the bridge between sap archivelink and Alfresco for this display ?
    how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
    we are working in 4.7.

    Hi,
    Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
    Once that is in place you can configure a repository in OAC0.
    At the link below you find a link to a PDF
    http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
    Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
    Furthermore CTAC seems to have done development to connect SAP and Alfresco.
    Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
    Kind Regards
    Edmond

  • What is the link between tablesPA_PROJECTS_ALL and PA_PROJECT_ACCUM_ACTUALS

    we hav requirement where we need to join these tables.
    can anybody tell ,What is the link between tables PA_PROJECTS_ALL and PA_PROJECT_ACCUM_ACTUALS

    This looks like an Oracle Financials question.
    I don't think anyone here can answer that.
    You need to look for a Financials or E-business forum.
    Sybrand Bakker
    Senior Oracle DBA

  • How to find the link between strcture and query technical name

    Hi Guru's
    How to find the link between Strcture in the query and query technical name. In other way where used list of the structure  used in queries?
    I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
    Please can anyone help me?
    Regards,
    Sirisha

    Hi ,
    For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
    U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
    Thanks,
    Amit

  • [SOLVED] What's the link between AUR and ABS?

    Hi!
    I'm still a bit new to Arch and recently I added google-talkplugin using AUR (https://aur.archlinux.org/packages/google-talkplugin/).
    But apparently there is a link between AUR and ABS that I don't get already...
    Most of all, will google-talkplugin be updated automatically when I do a "pacman -Syu" or I'll have to check for new version frequently and recompile everything each time?
    I think maybe ABS is the solution to this problem...?
    Thanks!
    Last edited by Creak (2013-10-27 12:56:00)

    Creak wrote:About the AUR helpers, there is quite a long list of search/build helpers.. Is there better ones? I've just seen yaourt in a screenshot once...
    This is highly subjective and depends on what you need and what your current experience level is.  You will often see yaourt discouraged for new users - it just automates too much, so when something goes wrong, users who haven't used less-hand-holding tools have no idea how to proceed.  I use cower, which has a simple command to check which AUR packages you have installed are outdated - but then it is up to you do update them yourself.  I'd suggest something like the latter approach.

  • Question about the difference between HDDs and SSDs

    Hi. I currently have a MacBook (Black one) that's overheating a lot for the past few months. I'm thinking about purchasing a MacBook Pro for school because it seems to be more stable. I have a question though. What is the difference between HDDs and SSDs? Which one is better? All I know is that with my MacBook and my iBook is that I had hard drive failures (iBook hard drive clicking, MacBook hard drive sounding loud and making my computer overheat). Are hard drive failures normal with Macs?
    Thank you

    astoldbywesley wrote:
    Is a 128GB Solid State Drive better than a 500GB Serial ATA Drive @ 5400 rpm or 500GB Serial ATA Drive @ 7200 rpm?
    Depends what you mean by "better." Faster? Yes. The 500 has 3x more storage capacity.
    Message was edited by: tjk

  • What is the link between "sood" and "ebelen" ( in me22n ) ?

    in me22n there is an option to attach doc  ,
    what is the link between the order and the doc  ?
    i done st05 and found "sood" sofd"
    also by answer here fm : SO_USER_READ_API1
    but didnt find the link between the order "eblen" and the attach doc .
    thanks

    y u are finding out link b/w EBLEN and Doc ? these tables are related to SAP office.
    SOOD = SAPoffice: Object definition
    SOFD = SAPoffice: Object Definition
    Regards
    Prabhu

  • Questions about the differences between Arch and Chakra.

    I'm trying to decide whether to install Arch or Chakra on my laptop. Currently, I'm running Arch on my desktop and Windows 7 on my laptop (which I plan to overwrite). My skill level with GNU/Linux is somewhat intermediate – noobs refer to me as an expert, experts refer to me as a noob. If it matters, I'm a KDE user and primarily use my computers for web browsing and python development. Anyway, I just wanted to get an objective opinion on the differences between Arch and Chakra. I have a few points that stand out to me, but I welcome any input.
    -Stability
    I started my journey into GNU/Linux with Debian back in 2009 due to it's stability. I really disliked Debian's ancient software and considered moving my system to Unstable. While doing some googling about Debian Unstable, I stumbled across Arch – it was love at first sight. I've been an Arch user ever since. I love the bleeding edge software, and haven't had any major problems since I originally installed it. However, every time I run a system update I cringe a little. While Arch hasn't broken on me yet, I've read plenty of horror stories and it makes me uneasy. I understand that Chakra is a mix between a point and rolling release model. Is it any more or less stable than Arch? I know there are other distrobutions out there, but I'm in love with the Arch philosophy.
    -Security
    Pretty self-explanatory, but is there any difference in security between the two?
    -AUR
    As much as I love Arch, I wouldn't be able to stand it if it weren't for the massive collection of software available in the AUR. While I'm perfectly capable of compiling software myself, I prefer to use a command like tool like yaourt to manage my software. I understand that Chakra doesn't officially support the AUR and that they have their own user repository. Seeing as Chakra is still relatively new, is it lacking? Will I miss the AUR as a Chakra user?
    -Repositories
    Is there much difference in the official repositories between the two distrobutions?

    avonin wrote:
    I'm trying to decide whether to install Arch or Chakra on my laptop. ... I'm a KDE user ... I just wanted to get an objective opinion on the differences between Arch and Chakra..
    -Stability...
    -AUR...
    -Repositories...
    My take on Chakra is that it's the same as Arch with different developers.  They use pacman. They have a different and rather nice build system for their developers. They're doing a good job, but I'd hate to give up the services of Allan McRae who must work full time keeping the Archlinux core and toolchain up to date.  Chakra devs probably piggy-back off his work.
    As for "semi" rolling: I don't see Chakra as having a stable core.  A stable core sounds attractive, it would be like NetBSD which has a very stable core Unix operating system with apps added via pkgsrc.  But Chakra's core and toolchain is at the same version levels as Archlinux most of the time and are no more tested and stabilized than ours. Their core packages are updated piecemeal just like ours; there is no stable core that is released as a unit (afaik). Today Chakra has gcc 4.7 / glibc 2.15 just like ours. Their kernel is a little more stable: they're using udev 181 / linux 3.2.8 while Arch is on udev 182 / linux 3.3.7.  They are more conservative in upgrading xorg and the video drivers than Arch.  For example, today they're on xorg-server 1.10.4 / intel video 2.17 while Arch is up-to-the-bleeding-edge-minute with xorg-server 1.12.1.902 and intel video 2.19.  Yeah, I would consider Chakra to be a little more "stable" than Arch mainly because of their relaxed pace in changing the kernel and the xorg stuff.
    Most of the patches that I look at for Arch packages (I build my system entirely from source and try to build monthly releases for myself) are needed because we use more recent core packages like glib2/glibc/gcc than the developers of higher level stuff like qt.  Chakra is in the same situation.  We're on the front of the wave
    The Chakra CCR is compatible with the Arch AUR and mainly draws from AUR (an AUR buildscript will usually work fine on a Chakra system -- they just add one or two additional info fields.)  With a little effort you could get any package installed on a Chakra system that is available on Arch.
    Last edited by sitquietly (2012-05-24 20:43:58)

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Share files over the internet between PC and MAC server

    The set up:
    A MAC OS X 10.3.9 server running on a local network in the office sharing files with 15 windows XP and MAC.
    The problem:
    Can't connect a windows XP away (from home over the internet) to see files being share by the MAC server. I can do this with an other MAC from my home when I go to "Connect to server" and then I type the IP adress of my MAC server at the office, login with the user ID and then can see files on the server. When I am at the office, there is no problem with the windows XP machine to connect to the MAC server. When I am at home, I can connect with my windows XP machine to the MAC server at the office for FileMaker server (reside on MAC server at office), but I can not see the files shared on the MAC server over the internet when I connect via windows explorer serveradress
    (no firewall on the MAC server).
    Thank you

    I would like to know this, too. I'm trying to set up something with my bother on a PC. How does he make a connection on windows? I don't know what to tell him to do.
    Gabriel, do you have Wndows Sharing activated under Services in your Sharing Prefs?
    Tracy

  • Question about the difference between MSPP and MSTP

    Hell,
    I wonder what is different between 15454 MSPP and SMTP.
    Any answer will be appreciated.
    Thanks

    MSPP and MSTP both use the same chassis. control and communication cards and software. The difference is that MSPP uses TDM (SONET and SDH) cards OCn, STMn, Cross connect, while MSTP is DWDM i.e transponders, ROADM, pre-amps e.t.c

Maybe you are looking for