A question regarding the limitations of using MS Access.

Hello everyone,
my question is not one of a direct comparison between Access, SQL Server and mySQL, but is concerned with how much of JDBC 2.0's functionality I can implement using an Access 2000 database and a type 1 driver.
Are there area's of JDBC 2.0 that do not work with an Access database. I ask this as I seem to recall from reading Gregory D. Speegle's book - "JDBC: Practical Guide for Java Programmers" that some resultset methods [I think] do not work with Access. Is this correct, and if so which methods are they?
Thank you for your help.

access does many things in its own ways which can be
very different from other databases, one thing is if
you try to get meta data from the connection objm you
will fail, as a result, there is no easy way to find
out all the tables in the database, for example. You are right about this, I forgot it was missing, and if I were to categorize it I would say it' a significant piece that is missing when using Access.
there
is no jdbc driver for access, you need to use odbc and
jdbc. another baad thing is it is single threaded, may
not be suitable for mutiple users, especially on the
web. it crashes where other databases ususally wont.
man, i have some experience with it - bad!Not everyone has had bad experience with Access, your mileage may vary.
mySQL on the other hand, is a more normal database,
its speed is as great as oracle, and it is muti
threaded, great for almost all things, including
learning databases. it is free, open source...mySQL as fast as Oracle? I'll check with Larry E. and get back to you...

Similar Messages

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens. If you know what's wrong please let me know.

Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6.

/*line 957 error */
     public void select()
          for (count = 0; count <= p; count ++ )
               if(P[count] != null){ /* validation */
               m = (int)(P[count].getX());
               n = (int)(P[count].getY());
               if (Math.pow(-1, m + n) == 1)
                    piece[m][n].setBackground(wselect);
               else
                    piece[m][n].setBackground(bselect);
          step = 2;
     }

Some simple questions regarding the Xcode.

I have some preliminary questions regarding the Xcode (objective C):
What is the difference between the programming files followed by .h and .m?
What does an asterisk * followed by a text mean (i.e. *window;)?
Is there any source that briefly explains the most common codes with examples (nsstring, nsarray, iboutlet, inaction.....etc)?
Any other tips will be highly appreciated.
Many thanks.

Xcode is the IDE.
Objective-C is the most common language used within Xcode.
UIWindow *window ..... the * means return the address of the instance variable 'window'.
An * is called a pointer to a variable.
Everything you need is explained here: https://developer.apple.com

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Question regarding the Transformation activity in BPEL

Hi,
I have a question regarding the Transformation activity in BPEL.
I have a database adapter that uses a PL/SQL API. The API returns two tables of nested objects and it automatically generates a schema for me based on the outputs structure. I need to use the Transformation activity to map both these out parameters to root element in the destination.
The element in the destination is "unbounded". Please take a look at the following screen shot -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1.gif
From the screen shot, you can notice that I have two XML segments X_TEST_TBL and X_TEST_TBL1 in the source and I have one GLOGXMLElement ("unbounded") in the destination. I need to map each of the source elements to the same destination. Then internally, I will be mapping the elements of X_TEST_TBL to "Location" segment/element and the elements of "X_TEST_TBL1" to "ItemMaster" segment/element. If I try to use "foreach" and map second
element "X_TEST_TBL1" also GLOGXMLElement using the foreach, I get the following error -
http://www-apps.us.oracle.com:1100/~rvishnuv/transform1_error.gif
Let us say my X_TEST_TBL contians two records and X_TEST_TBL1 contains one record. Is there any way that I can use these two out parameters to map to the same destination (GLOGXMLElement) so that my final document contains multiple "GLOGXMLElement"s that represents data from both the output parameters? i.e. there should be in total of three occurances of GLOGXMLelement in the output document such that two occurances correspond to data obtained from X_TEST_TBL and one corresponds to data from X_TEST_TBL1.
Please let me know if there is any way to achieve this.
Thanks
Ravi

Is the listed $200 credit towards a trade-in on top of the original trade in value of a phone, or the maximum amount?

Question regarding the pen tool (w/ picture inside)

Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!

A couple of thoughts come to mind:
1. You could create the shape "face on", using guides, and the points will snap to guides with snap enabled. Then you could transform the whole thing together by selecting all the shape layers.
2. Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
3. There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually. I assume this is what you're trying to avoid.
-Noel

Question regarding the installation of a J2EE 6.40 Add-in

Hi all,
I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
Best regards,
Xavier Vermaut

Thanks Bhavik for your reply,
That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
Dear SAP,
We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
(TST) but get the following error message at the very beginning of the
installation
> Cannot find an installed ABAP system, which is a prerequisite for a
> J2EE Add-In installation. The installation cannot continue.
We checked the installation logs (sapinst_dev.log) and found the
following :
> Found these instances:
> sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
> sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
Why does the installation say that it can not find any ABAP systems when
having previously found the 2 different instances running on this
server?
Would this problem be related to the fact that we have two instances on
this server?
Please find hereunder the way we performed this installation :
01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
     (Solaris 10 - Oracle)
     Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
     Part II : CTRLORA10_0-20000121.SAR         (Solaris 64)
     Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
     Part IV : J2EERT10_0-10001982.SAR          (OS Independant)
02) Extract these 4 archives into /install/J2EE_640
03) Check Java Version and Environment Variables
04) Check Solaris Pre-Requisites
05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
06) Log in as 'root'
07) Set DISPLAY environment Variable
08) Move to the Installation directory
      ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
09) ./sapinst
10) In the 'Welcome to Netweaver Installation' screen, select
      => Dialog Instance Finalization
Any idea how to get this solved?
Best regards,
Xavier Vermaut
Message was edited by: Xavier Vermaut

Few questions regarding the "Update CMS" button

Hello,
Few questions regarding the "Update CMS" button:
1. When I create new product at the SLD I see it at the add SC table even if I don't click the "Update CMS" button first. If so, when will I use this option?
2. When I do click the "Update CMS" button it takes it between 30-40 minutes to finish the update. During this time frame the whole development portal (it is sitting on the same WAS as the NWDI) becomes extremely slow. Is this normal response time or do I have a certain performance problem with my server?
Thank you in advance,
Roy

Hello Roy,
I think that <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/46/6fe3ec58f0477a816b80f182b389e0/frameset.htm">this</a> topic should answer all your questions :).
Hope that helps!
Jordan

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG ‏6 KB

Can I get information regarding the client browser using JSP

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

What are the limits of using windows internal database in RMS?

hi,
We dont have SQL server to use and opting to use windows internal database
What are the limits of using windows internal database in RMS?
tnx

Hi,
the main limitation is that you cannot access a SQL express from remote (even there are tricks to work around that), so you cannot add another machine to the RMS cluster.
Microsoft's recommendation for production systems is to use a full SQL server, what allows you clustering and running all sorts of maintenance tasks.
Other than that SQL Express has a 10GB total limitation for all databases running on that server.
See also http://technet.microsoft.com/en-us/library/dd772673(v=WS.10).aspx for RMS hardware and software requirements.
Hope that helps,
Lutz

I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

Questions regarding the APEX sample shopping cart

I am fairly new to APEX development, but had a few questions regarding the sample APEX shopping cart:
1) is there a way to integrate Google check out payments with the sample APEX shopping cart
2) is there any way to list a service, that involves monthly recurring payments
3) is there any other shopping cart that is APEX based that is available
Thank you,
Ashok

Hi Sam,
i am haveing a deadline monitoring for my shopping cart where remainders are going to generate for first day and the second day, after both the remainders generated and the approver changing the cost center or asset or order at that time, the workflow flow should retrigger and send the approval mail to the new approver, but it is not going to the new approver, so the workflow is not triggering in my case. so i need to restart my workflow again if any changes occurs.
in the second point my functional guy says that, when the approver changes any text or any date like that it should come for the accept changes, and when he sees the approval preview, only the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should the approver name not the creator name.
so can you please help me in this to get the solution.
thanks in advance

A question regarding the limitations of using MS Access.

Similar Messages

Maybe you are looking for