A question related to CRS installation?

Hi, body:
When I try to install Oracle Clusterware using OUI, for the step 5: Specify Cluster Configuration, after add all the nodes' public, private and VIP name, when I click NEXT, it shows "the specified nodes are not clusterable, returned by operating system".????
I checked the nodes name, there is no error, same as /etc/hosts names (I am on Linux).
Any body can Help me?
thank you very much in advance!

Can you ping all ip's of the other box from each box? Use the hostname when you do that.

Similar Messages

Queries related to Redwood Installation / Upgrade to Full version

Hi All,
We Need some help.
We have couple of question related to redwood installation, kindly help us.
We have SAP Central Process for Scheduling (Redwood 6.0.2.7) basic version installed on our Unix server.
We are now planning to migrate to the SAP CPS full version and have already procured the license. SAP added the installables at the marketplace under - Installation and upgrades - My Application components - SAP Partner products - SAP CPS Scheduler (Full) after the procurement. We have downloaded the installables now.
My questions are:
1. How do we now upgrade the Redwood OEM version to full version? Because, we had mailed to SAP with the OEM license to change it to full version, but then SAP replied to us asking us to send them the full version license. How do I get that? Does this file (register.txt) gets created once we start the installation of Redwood full version? Because we had assumed that by buying the full version license, we would just need to send the OEM license and it would be changed to a full version, but its not so. How do we go about from here. Do we do a new installation and uninstall the basic version?
2. Also, if we are to do a new installation, how do we get the register.txt file which we need to send to SAP for key generation?
We are very new to Redwood. Any pointers would be highly appreciated.
Awaiting your response.
Thanks in advance.
Warm Regards
Rajeet

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read
Rgrds
Vineeth

Crs installation problem in oracle 10g rac with NAS storage

Hi,
for my practice i am trying to install oracle 10gR2 on RHEL5-64bit OS in my laptop.
during my crs installation i have struckup with the below error while i am executing root.sh in node1.
Error:
+++++
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1: Failed to initialize ocrconfig
Failed to upgrade Oracle Cluster Registry configuration
ocrconfig.log ;
++++++++++++
NFS file system /u01 mounted with incorrect options
[ OCROSD][4265610768]WARNING:Expected NFS mount options: wsize>=32768,rsize>=32768,hard,(noac | actimeo=0 | acregmin=0,acregmax=0,acdirmin=0,acdirmax=0
[ OCROSD][4265610768]utopen:6m'': OCR location [share/storage/ocr] configured is not a valid storage type. Rturn code [37].
As per metalink i have find that this problem is fixed with Patch:4679769
# Patch Installation Instructions:
# To apply the patch, unzip the PSE container file:
# p4679769_10201_LINUX.zip
# Set your current directory to the directory where the patch
# is located:
# % cd 4679769
# Copy the clsfmt.bin binary to the $ORACLE_HOME/bin directory where
# clsfmt is being run:
# % cp $ORACLE_HOME/bin/clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin.bak
# % cp clsfmt.bin $ORACLE_HOME/bin/clsfmt.bin
# Ensure permissions on the clsfmt.bin binary are correct:
# % chmod 755 $ORACLE_HOME/bin/clsfmt.bin
3. Run the root.sh script and proceed with the installation.
**My question is still i am not install Database ..only i ma trying to install crs but in this readme .txt we need to replace the clsfmt.bin file in ORACLE_HOME/bin.**
**but i have not bin directory under in ORACLE_HOME.please clear my doupt to apply this patch...**
Regards,
Mugunth

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

Question related to Synchronous update

Hi, all
I have some question related to synchronous update:
1. What is the syntax if I want to write synchronous update.
Do i write as:
call funcition A in update task
commit work and wait
Or just
call function A (A declared as update type function )
commit work and wait
Or ...
2.If we use synchronous update, is VBHDR,VBDATA still filled the same way when using asynchronus update?
Thanks in advance,
Liming

Hi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single
database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load

Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

Question related to Java Concurrent Program

Hi Friends,
I have a basic question related to Java Concurrent Program in the Oracle application. I would like to know the how Java concurrent program is executed in Oracle applications.Also, want to know where can I find the document for the AOL packages for Java concurrent program. Document for packages like oracle.apps.fnd.cp.request.* , oracle.apps.fnd.util.*.
Please let me know.
-Thanks,
Satya

You may also check:
Note: 250964.1 - How to Register Sample Java Concurrent Program
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=250964.1
Note: 186301.1 - How to register and execute Java Concurrent Program ?in Oracle Applications R11i?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186301.1

Interview Questions related to Warehouse management

Hi all
Can u please help me regarding Interview Questions related to Warehouse management
Thanks and Regds
Daniel

Have you searched in very first thread
[Warehouse Management?|New to Materials Management / Warehouse Management?;

10g CRS installation error on W2k / W2k3

Hello,
the installation of Oracle CRS is apparently successful, but the configuration assistants fail.
Details in the log-file:
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 10.0.0.1 rac1
node 2: rac2 10.0.0.2 rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: F:\cdata\rac\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
rac1 service OracleCSService in improper PENDING state, err(997)
rac2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
After CRS-installation the following situation results.:
Node 1 (installation PC)
File copy to c:\oracle and c:\Program Files\Oracle successfully.
Drive letter mapping (E:;F:) and formatting successfully.
File copy to F:\cdata\rac\votedsk successfully.
Four Oracle Services created. OracleClusterVolumeService started.
OracleCSService is hanging. Therefore OracleEMVService and OracleCRService couldn't start.
Error messages in the local Oracle log-file see above.
Node 2
File copy to c:\oracle and c:\Program Files\Oracle successfully.
NO drive letter mapping.
Four Oracle Services created. OracleClusterVolumeService started.
OracleCSService is hanging. Therefore OracleEMVService and OracleCRService couldn't start.
No errors in the local Oracle log-file.
This error occurs with repeated attempts (both under Windows 2000 and under Windows server 2003).
Environment:
Two Dell-PCs with in each case two 100 MBit/s Ethernet-LAN cards which one is connected public network, other is connected internal network (crossover cable).
OS is installed clean, not contain previous oracle.
Any help would be greatly appreciated.
Volker

try this:
" If OracleCMService9i or the OracleService<SID> fails to start check that the interconnect is using a hub or switch of some type. In many cases, use of a crossover cable can lead to hangs because when there is loss of electrical connectivity to a NIC, it is sometimes disabled on systems running Windows NT/2000. This can also lead to an increase in time that it takes to initialize the card on a reboot. This depends on the HW platform, but in general, Oracle recommends always using a switch or hub for the interconnect, so that some type of connectivity is maintained with the Private NIC. Note: You may also be able to avoid this by disabling Media Sense in Registry, but a switch is preferred. See MS Article#Q239924 for details on disabling media sense.: http://support.microsoft.com/default.aspx?scid=kb;en-us;Q239924 This applies to all Oracle versions."

Questions relating to Groupware Integration (Outlook)

Hello,
I have few questions relating to groupware integration for Outlook:
Q1) The "Relate to CRM" option in outlook add-in for end user is available only in client side integration? Is it not available for server sider integration (i.e. in server side, end user cannot directly assign CRM account or Transaction to object in outlook the way it is done in client side)?
Q2) Is there any end user interface (like add-on) available in server side?
Q3)In client side - Can the outlook add-on for SAPCRM be enhanced for different business logic or look n feel?
Thanks,
Vicky

Hello Vicky,
1) Yes the Relate to SAP CRM function is part of Client-side groupware only.
2) The Add-in is only available with Client-side groupware.
3) The Add-in cannot be customized. However the results can be influenced by parameters in transaction GWIPROFILE.
The information displayed in the Business information Pane can be changed.
Best Regards,
Gervase Auden

Basic Questions related EHPs for SEM

Hi Guys,
I've some basic questions related to EHPs: -
1. If we don't mean to implement any of the new functionalities does it make any sense to implement EHP? In other words do EHPs also have some general improments other than the functionalities which can be specifically activated?
2. If we just activate a functionality and don't implement/ use it can there be any negative impact?
3. In case of a pure technical upgrade from SEM 4.0 to SEM 6.0 which EHP would be recommended?
4. Is there a quick way to find all relevant notes in EHPn which are related to corrections for EHPn-1?
Thanks in advance,
-SSC

HI,
If you see some of my older posts I have had many issues with certain features of the EHP2 functionality but that doesn't mean I would recommned against it.
BCS 6 EHPs 3 & 4 (BCS 6.03 / 6.04) - enhancement packs worth implementing?
BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack
My recommendation is to implement the EHPs but not necesarrily activate the functions (in SFW5) unless you need them - this means that you will only have to test once after EHP implementation and will have the ability to activate the other features as and when required (although testing is required after activation of course) whereas it might be difficult to persuade your client/basis team to implement EHP4 later if you don't do it now.
In the features of EHP2 (activate FIN_ACC_GROUP_CLOSE) it states that there is a general performance improvement - although I have yet to experience it! From OSS note 1171344 "The functionality which is available in EHP2 consists of...
... Performance improvements of status management, reporting and initial start-up of consolidation workbench and monitor.
Since activating FIN_ACC_GROUP_CLOSE I have had many OSS notes requiring application but i discovered that when the technical team implemented the EHPs (before i joined this client) they somehow forgot the latest SP (support packs) and didn't upgrade to the current level - so make sure that you get the right SPs too (see the links in Greg's link above) to avoid the many OSS notes.
As for your question - "is there a list of OSS notes to specific to EHP upgrades? - the answer is most definietly "NO" - I already asked OSS in desperation!
however, you can see the OSS notes that i have applied listed in the above link ( BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack )

CRS installation

My Cluster Ready Services 10.1 (CRS) installation ran into some problem.
Following are the pre-installation and installation steps which i followed.
1. The system setup involved 2 identical nodes with Windows 2000 Advanced Server SP4 OS.
2. 2 static Public IP's for the 2 nodes
3. 2 private IP's which were created using network connections option and can be pinged.(1st Node Private IP 10.10.10.2 2nd Node Private IP 10.10.10.3)
4. Entry of the private IP's can also be found in the host file.
5. Both the nodes are connected to a external SCSI hard disk.The Skuzzy hard disk is not formated.Before installing CRS logical partitions where made on the Skuzzy hard disk for OCR,Voting disk and ASM.
6. While installing CRS on one of the nodes in the Network Usage Page one interface was selected as Private and the other as public.
7. The Do not format any logical drives was selected.
8. Finally the Logical partitions made on the SCSI hard disk were assigned to the OCR and voting disk.
After that the installation went without any problems till it reached 98%.The installation was stuck on 98% for almost 30 minutes.Sensing problem i opened the installation log file and scrolled down to the last few entries which said that the files could not be written on the node as it is accessed by some other program.So i had to abort the installation.
Could anyone tell me if i have skipped some steps or need to add any step to make my CRS installation a success.
Thanking you in Anticipation,
Regards,
Salil

Following is the description of the error found in the installation log.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005c.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005d.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005d.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005e.nlb:pc-p41295:true
***Unable to copy file to nodes (The process cannot access the file because it is being used by another process.
):D:\oracle\product\10.1.0\crs/nls/data/lx2005e.nlb:pc-p41295:true
Regards,
Salil

Some questions related to SAP XI

Hello!
I would like to know the answers for the following questions regarding SAP XI-context (if it possible with Yes/No and a short comment/explanation)
CAPACITY PLANNING GUIDELINES
a) Guidelines to size the server(s)?
b) Guidelines for sizing the over all environment for High-Availability
ARCHIVING CAPABILITIES
a) Approach to archiving of obsolete data
PLATFORM SUPPORT
a) Software supported on HP-UX 11.i V2 (r6) on Itanium.
b) software supported on Windows 2003 sp1 (x64) on AMD Opteron
c) software support aligned with release roadmaps for future versions of HP-UX and/or Windows Server
d) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why)
RELATIONAL DATABASE 
a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported.
b) database monitoring tools be used to manage impending maintenance needs and potential problems and performance impacts (i.e., tool will monitor and detect prior to real problem occurring)
c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
d) database accept binary-large-objects (BLOBs) and be referenced via the relational engine.
Thank you in advance!
Regards!
A.Henke

two questions related to this:
1. Why Java is designed to only permit single
inheritence, any stories behind the scene? I think
some major reasons why "prefer interfaces toabstract
classes" is accepted is rooted in this limitation.Yes, one of the reasons interfaces are better is that
you can only extend one class, but implement many
interfaces. Say you have a concrete class that should
"implement" two different types. If those types were
defined as abstract classes, you could only use one
type. You could implement both types if they were
interfaces though. So why java is designed to have this limitation? There may be some arguments before this is settled down. I always like to hear this kind of stories:)
2. Base on the fact that once an interface is outof
box and widely implemented, it is almostimpossible
to change it. So how you guys design yourinterfaces?
Could you share some? In my idea, I would designmy
interfaces as compact as possible.You could extend the interface and start using that
if you didn't want to break existing code. You
couldn't use that implementation as an Interface1
though, since the new methods only exist in
Interface2, so that's not an optimal solution.So we may always need to add a new interface when we just want to add a new method.

General questions related to Java

Good evening,I would like to ask you some questions related to Java :
1) class A {
public int x=1;
public int y=5;
public A() { y=6; }
public A(int a) { x=a; }
public A(int a, int b) { x=a; y=b; }
class B extends A {
public B() {}
public B(int a) { super(a); }
public B(int a, int b) { super(a,b); }
public B(int a, int b, int c) { x=a+b+c; }
public B(int a, int b, int c, int d) {
super(a,b); y=c+d; }
public class Test {
public static void main(String[] args) {
B b4 = new B(1,1,1);
System.out.println("b4.x: "+b4.x+" b4.y: "+b4.y);
I cannot understand why y = 6.
As i see it,i find it more logical that y = 5.
Could anybody tell me why y becomes 6?
How did we get into the constructor of A : public A() in order y to be changed?
2) Well in an exercise i have to handle out we have to find the a,b,c of a program .Unfortunately i dunno about them,Can anybody explain to me what do they mean or attach me a link (e.g. a tutorial) in order to figure out?
a)pre condition in Java
b)post condition in Java
c)invariant condition
3)
3) Fraction apple = new Fraction (1, 2);
Fraction peach = new Fraction (4, 5);
Fraction pear = apple;
peach.halve();
pear.halve();
System.out.println(apple);
System.out.println(peach);
System.out.println(pear);
It's the first time i see an object as a parameter in System.out.println.
CAn anybody tell me when i can pass an object as an argument in System.out.println?
Thanks in advance!

How did we get into the constructor of A : public A() in order y to be changed?if you don't explicitly call a super constructor, the empty super constructor is called for you. If no empty accessible super constructor is available and no explicit call from subclass is made - compile error.
CAn anybody tell me when i can pass an object as an argument in System.out.println?Whenever you want. Object.toString() will be called and the resulting String will be used. If the object is null, the String "null" will be used instead.

Question related to E-Business Suite (Business Group)

Dear All,
I just started my career as an oracle Functional Consultant (HRMS), I have questions related to Business Group
- Why BG is a part of HRMS? Although we associates different profiles with it like, legal entity, which is used for financial purpose only.
- Under which conditions we make more then on Business Group?

Pl do not post duplicates - E-Business Suite queries related to BG

A question related to CRS installation?

Similar Messages

Maybe you are looking for