A Question while Upgrading..

i thought about upgrading database for 8.1.7.4 to 11.2.0.2 , the thing is if someone had very low system and OS requirements, what if they wanted to upgrade to some other version, other than the upgrade path that is mentioned in metalink, which can run in their requirement for now.
For example,
the actual upgrade path is.
8.1.7.4 => 10.2.0.4 =>11.2.x
what if we upgrade like this path...
8.1.7.4 => 9.2.0.8 => 11.2.0.2.0
will it create problems.. what are the problems i will be facing??
I don't know how to ask this question more perfectly, i hope you guys understand my question.. i am sorry if this has been asked before... please help me out here.. :-)

Thanks for the reply guys...
but what i am asking is that.. if i followed my path instead of the metalink path, will i succeed in upgrading..?
thanks martin for the link but can i follow my own path.. i mean any version of database to the other that is not suggested in upgrade notes ?
e.g:
9.0.1.3 (or earlier) -> 9.0.1.4 -> 10.2.0.4 -> 11.2
but what if i followed another path which is not given in the note proper 11.2.0.2 readme ? will i succeed?
see this note --- Doc ID 730365.1
if i followed any path as in the above document than the given read me file of upgrading path as above, can i succeed?
Edited by: Smelly Smiley on Sep 28, 2011 10:11 AM

Similar Messages

Question about upgrading iTunes multiple computers with shared library

Greetings,
I have a question about upgrading to the current version of iTunes.
Currently, my household uses 3 Mac computers (2 Powerbook 17in laptops and a Mack Mini). We are all (currently) on system 10.4.11 (with iTunes 9.2.1). Between the 3 computers we have a shared iTunes music and video library on a networked high capacity hard drive.
We recently purchased an iPad. In order to make it easy for updates and to use media from our iTunes shared library I decided that we should upgrade the systems on our home computers to Snow Leopard. I have ensured that all the computers have at lease 2 Gb of RAM and adequate hard drive space.
The only possible problem I see is that one of the Powerbook laptops uses the old Motorola processor. (This is one of the last Powerbooks to use that processor.) I don’t think this computer can be upgraded to Snow Leopard.
My question is, if I upgrade 2 of the computers (and iTunes in the process), will I still be able to access the shared iTunes library using the older computer with the older system and iTunes? Will the upgrade process change the iTunes library in such a way that the one older computer will no longer be able to properly access that library?
Are there any other problems I might encounter having a mixed system/iTunes environment?
Thank you,
Tim

iantoole wrote:
Just a thought. Should I somehow open iTunes on MBP2 using MBP1's Library file??
both Macs can access the same library file, however, only one at a time !
to do that, you would ideally have the entire iTunes folder (not just the iTunes music folder) on the external. then, on one Mac after the other, launch iTunes while holding the option key, click on +choose library+ when prompted, and select the iTunes folder on the external.
or, you could have two separate libraries and keep those in sync using third party tools such as Syncopation, TuneRanger or SuperSync.
for purchases from the iTunes store, you could set up _*Home Sharing*_ - it can be configured to automatically transfer new purchases to home shared libraries.
Can I create a script to have MBP1 always save the iTunes Library file on the shared hard drive?
no need.
JGG

Missing features while upgrading to sharepoint2013

While upgrading i faced two issues:
1. Found a missing feature Id = [dc98d4f8-2307-4fe4-9f9c-5b9d97bce640], Name = [Lab04 Feature1], Description = [], Install Location = [Lab04_Feature1
2. WebPart class [6fcd2d02-416d-6df5-d11b-992a0dc48370] (class [JSharepoint.JSFile.JSFile] from assembly [JSharepoint, Version=1.0.0.0, Culture=neutral, PublicKeyToken=62e6c3f22721431c])
is referenced [2] times in the database [WSS_Content_02], but is not installed on the current farm. Please install any feature/solution which contains this web part.
i run the following query against database but query returns null
SELECT * FROM WSS_Content_2007.dbo.Features WHERE FeatureId = ’75a0fea7-cd50-401e-af0e-782f3662a299′
SELECT * FROM WSS_Content_2007.dbo.WebParts WHERE tp_WebPartTypeId like ’68ec641-8c6a-1cc6-6465-185094919a93′
is there any other way the fix these issues

Let me know if you can help in below issue;
I am trying to migrate SP 2010 to SP 2013 using contend db upgrade method.
Before runing Test-SPContentDatabase command I deployed all the custom wsps.
But still I am getting feature not found. No change in GUIDs.
I deployed branding feature in compitible mode and rest of other features are in native mode.
upgrade error log shows both types of features are missing.
But when I create Site Collection on default content database then I can see custom features are
avaiable.
I had followed same steps as you described in your post except one change in wsp deployment.
I had deployed branding wsp in compatible mode (14) and rest of features are native mode (15)
with same GUID. Still I am getting both type of features marked as missing.
As per your experiecne, at least in my case branding feature should not be marked as missing as installed sp 2010 version. But I can see under missing feature error.
My next question: Is that mean we can't migrate SP 2010 Content database having customization directly to native mode and has to follow compatible mode?
Thanks in advance
- Sudarshan S Vatturkar

Can i ulter my COA, calendar and Multi Org structure while upgrading

Hi All,
I am working on a upgrade project and i have a querry on my client requirement...
1. Can we alter COA structure while upgrading like adding OR deleting segments to the existing structure
2. Can i change my calendar type and number of periods
3. can i re organize my multiorg structure like adding or merging LE, OU and INV
Could you please share me your thoughts..
Thanks in advance...

seen the exact same question answered in the below link .....
http://www.erpstuff.com/forums/topic.asp?TOPIC_ID=9946
Regards,
Ivruksha

Security and roles while upgrading to bi7

hi
Guys i ha ve question about upgrade
what will happens to security and roles while upgrading from bi3.5 to 7 ?
is this can be migrated into bi7 from bw 3,5 , if so how ?
or do we need to create separate again in Bi7 ?
u r answer will be much apreaciated

Hi,
this can be upgraded but it is not a must. SAP recomend to use the new concept provided by NW 7.0...
You can switch on/off obsolete Authorization concept with RSCUSTV23. For security and clarity reasons make a u201Ecleanu201C new setup u201Efrom the scratchu201C (much easier, less complex than in 3.x)...
Check this upgrade guide it will give you all informations:
[SAP NetWeaver 7.0 BI Upgrade Specifics|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742]
New BI Authorizations set in SPRO (maintenance in RSECADMIN)
- During technical upgrade, and if you used an authorization concept in BW3.x
switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
- Important: After technical upgrade switch back to the new Concept and see
note 820183 and 923176 New BI Authorizations set in SPRO (maintenance in RSECADMIN)
- During technical upgrade, and if you used an authorization concept in BW3.x
switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
- Important: After technical upgrade switch back to the new Concept and see
note 820183 and 923176
Other links/notes which could be helpful:
Note 923176 - Support situation authorization management BI70/NW7.0
New Analysis Authorizations for BI Reporting:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/d71042f664e22ce10000000a1550b0/
content.htm
Regards
Andreas

I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?

I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?

Hey there denise.ca,
I see that you have a question about one of the functions of USB syncing. To answer your question, yes, you can sync contacts from your computer to your iPhone using USB syncing and iTunes:
Info: Sync your contacts and calendars.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
https://support.apple.com/en-us/HT201253
Thanks for using the Apple Support Communities!
Cheers,
Braden

Ctl+c while upgrade

While upgrading 9i to 10.2.0.2 .
@?/rdbms/admin/catupgrd was running and crtl+c supplied and script exits in between.
So re- ran the script and it completed successfully.
Question:
I wonder If this upgrade is success.
How this script works?
Thanks a ton.

I believe your answers are in MOS Doc 316889.1 (Complete Checklist for Manual Upgrades to 10gR2)
HTH
Srini

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Background job stuck while upgrading

I background job is stuck in SAP while upgrade is running .
According to upgrade document it should be about 1% .
Job Name is : RDDCP4TB
please help how can i proceed further ..
regards
sachin

Hi sachin,
Need to check couple of things here.
1.check for the back ground work process.
2.check the free space in /usr/sap/<SID>/SYS/global .if there is no free space to write the job log then backgorund job will not run.
3.Also check for the free space in archive log directory
paste the log for this particular phase so that we can analyze further.
Thanks and Regards,
-Bijesh.

Error while upgrading to 10.1.3.5

I am getting error while upgrading to 10.1.3.5.
getting error while configuring OWSM. here is the error log.
*09/09/28 14:28:53 Notification ==>Application Deployer for coreman STARTS.*
*09/09/28 14:28:53 Notification ==>Undeploy previous deployment*
*09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear begins...*
*09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear ends...*
*09/09/28 14:28:58 Notification ==>Starting application : coreman*
*09/09/28 14:28:58 Notification ==>Initializing ClassLoader(s)*
*09/09/28 14:28:58 Notification ==>Initializing EJB container*
*09/09/28 14:28:58 Notification ==>Loading connector(s)*
*09/09/28 14:28:58 Notification ==>Starting up resource adapters*
*09/09/28 14:28:58 Notification ==>Initializing EJB sessions*
*09/09/28 14:28:58 Notification ==>Committing ClassLoader(s)*
*09/09/28 14:28:58 Notification ==>Initialize coreman begins...*
*09/09/28 14:28:58 Notification ==>Initialize coreman ends...*
*09/09/28 14:28:58 Notification ==>Started application : coreman*
*09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site begins...*
*09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site ends...*
*09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear*
*09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman/coreman.war*
*09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
*09/09/28 14:28:58 Notification ==>Operation failed with error:*
Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
Deploy error: Deploy error: Operation failed with error:
Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
I checked the Connectors directory for coreman but its not available. I even checked with my previous successful installations for this directory, its not even there too.
The only difference i found in the error logs and the successful logs is ..
*09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
I did not see this line in the success log.
Here is my environment information.
I have an OPMN clustered environment. The second node in the cluster was down while this upgradation.
There are two groups -- default_group and abcbpel_group
abcbpel_group contains the soa instance. while default_group contains home instance.

Hi.
I have the same problem too.
Had You found the solution?

Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
Suresh

I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik

Issue while upgrading SBP 11.2.0.3.5 - 201303 to 11.2.0.3.9 - 201402V3

Hi,
while upgrading Oracle SBP 11.2.0.3.5 - 201303 to 11.2.0.3.9 - 201402V3 facing issue as follows
After finishing command $ORACLE_HOME/MOPatch/mopatch.sh -d -s SAP11203V3P_1402-20009977.ZIP
Link Status:
Link script not executed due to patch installation failures.
Please check the log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_05_02-15-02-04.log
for details. Resolve the problems. Re-start MOPatch to execute
the link script or execute it manually as
/bin/sh "./link.seskasap011.sh"
there are some failed patched found in the logs
Skipped 2 of 104 patches due to patch conflicts:
SAP11203V3P_1402-20009977.ZIP!17540582!17540582
    conflicts with: 11837095 12693573 12918738 13628002 13784384 13906412 13947840 14264364 14309390 14511876 15827841 15878275 15980576 16084707 16210371 16291679 163
57019 16359540
    OPatch log file:
$ORACLE_HOME/cfgtoollogs/opatch/opatch2014-05-02_15-03-26PM_1.log
SAP11203V3P_1402-20009977.ZIP!17239632
    conflicts with: 12693573
also foung below type of error in the log file
“”Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktfb.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktfb.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/ktsx.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/ktsx.o'
Archive Action: Source file "/oracle/GN0/112_64/.patch_storage/14309390_Aug_2_2012_13_50_45/files/lib/libserver11.a/tbsdrv.o" does not exists.
'oracle.rdbms, 11.2.0.3.0': Cannot update file '/oracle/GN0/112_64/lib/libserver11.a' with '/tbsdrv.o'””
when i try appling single patch using OPatch, it is not getting applied
Please suggest
Regards,
Narayana
+91 8374424972

Hi Janos,
Copy files from another Oracle Software is not a wise idea. Even if this would work, it is an unsupported way. No one could predict what would happen later on.
I said to rsync the file systems not to copy specific files, If you rsync the file system (Oracle_home) it syncs all the binaries without any difference between source and target. It doesn't require uninstallation and re-installation of Oracle.
Deinstalling and reinstalling the Oracle Software is the most easiest and quickest supported way
I did this rsync even on new systems where Oracle was not installed, it worked all the times without any issue.
Never mind - It is just another solution to resolve the issue and not to challenge
Regards,
Nick Loy

Error while upgrading OIM Middle Tier from 11gR2 to PS1

Hi Guyz,
I am facing issue while upgrading OIM11gr2 to 11gR2PS1. Has anyone faced similar while executing below in OIM patcihng guide.
3.7.1 Upgrading Oracle Identity Manager Middle Tier Using Property File
[oracle@oam1uat bin]$ ./OIMUpgrade.sh
Jul 8, 2013 1:36:30 AM oracle.iam.oimupgrade.standalone.OIMUpgrade main
INFO: logger initiated
Jul 8, 2013 1:36:30 AM oracle.iam.oimupgrade.standalone.OIMUpgrade main
INFO: Log file can be found at :/apps/oracle/oradata2/Oracle/Middleware_OIM/Oracle_IDM1//server/upgrade/logs/MT/OIMUpgrade130708013630-0400.log
Getting the inputs from properties file..
Enter Passwords
    [input]OIM Schema Password
    [input]MDS Password
    [input]Weblogic Admin Password
    [input]SOA Admin Password
select ufs.FEATURE_ID as FEATURE_ID ,ufs.IS_FEATURE_UPGRADED as IS_FEATURE_UPGRADED , ufl.feature_name as FEATURE_NAME from UPGRADE_FEATURE_STATE ufs , UPGRADE_FEATURE_LIST ufl where ufl.feature_id=ufs.feature_id and ufs.OIM_SOURCE_VERSION=?
null
Exception in thread "main" oracle.iam.oimupgrade.exceptions.OIMUpgradeException: Generating Upgrade Summary Report
at oracle.iam.oimupgrade.standalone.utils.UpgradeReport.generateSummaryReport(UpgradeReport.java:206)
at oracle.iam.oimupgrade.standalone.OIMUpgrade.main(OIMUpgrade.java:399)
Caused by: java.io.FileNotFoundException: /apps/oracle/oradata2/Oracle/Middleware_OIM/Oracle_IDM1/server/upgrade/logs/MT/oimUpgradeReportDir/index.html (No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:194)
at java.io.FileOutputStream.<init>(FileOutputStream.java:145)
at java.io.FileWriter.<init>(FileWriter.java:73)
at oracle.iam.oimupgrade.standalone.utils.UpgradeReport.generateSummaryReport(UpgradeReport.java:194)
... 1 more
The error recordeed in upgrade log file is :
Jul 8, 2013 1:37:06 AM oracle.iam.oimupgrade.standalone.utils.WriteLog write
SEVERE: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:884)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1167)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1289)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3637)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)
at oracle.iam.oimupgrade.standalone.OIMUpgrade.isPSAExecuted(OIMUpgrade.java:455)
at oracle.iam.oimupgrade.standalone.OIMUpgrade.preReq(OIMUpgrade.java:182)
at oracle.iam.oimupgrade.standalone.OIMUpgrade.<init>(OIMUpgrade.java:142)
at oracle.iam.oimupgrade.standalone.OIMUpgrade.main(OIMUpgrade.java:363)
-Swati Pandey

Has anyone faced similar issue ?

Unicode error while upgrading from 4.6 to ECC 6.0

Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel            *
FORM open_downloaded_file_in_excel.
DATA:
    lv_ole_books       TYPE ole2_object,
    lv_ole_sheets      TYPE ole2_object,
    lv_subrc           LIKE sy-subrc,
    lv_title(70)       TYPE c,
    lv_text1(70)       TYPE c,
    lv_text2(70)       TYPE c.
start excel
CREATE OBJECT obj_ex_sheet      'EXCEL.SHEET'.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet     'Application' = obj_ex_app.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app        'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books      'Open'       = obj_ex_wbook
    EXPORTING #1 = gv_filename
              #2 = 2
              #3 = 0
              #4 = 1
              #5 = 0
              #6 = 0
              #7 = 1.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_wbook.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook      'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets     'Item'       = obj_ex_wsheet
    EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet    'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
    EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet    'Name'       = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
       EXCEPTIONS
            OTHERS = 0.
ENDFORM.
regards,
Divya

hi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful.

OIM DB error while upgrading from OIM-R1 to OIM-R2

Hi All,
When we were trying to upgrade a environment from OIM 11g R1 (11.1.1.5) to 11g R2 PS1 (11.1.2.1), and while upgrading the OIM schemas ( Section 6.3.8 in the document http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABFHBFD) the OIM schema upgrade was failing and in the logs we were seeing the error mentioned below.
Let us know if anyone has worked/faced this issue while upgrading the OIM to R2.
CREATE OR REPLACE VIEW ADMIN_ROLE_MEMBERSHIP_VW
AS (
SELECT arm_org.*,
        ac.ACT_NAME,
        ac.PARENT_KEY,
        ac.ACT_CUST_TYPE
   FROM (
         SELECT arm.MEMBERSHIP_ID,
arm.ROLE_ID,
arm.USER_ID,
arm.SCOPE_ID as ROOT_KEY,
arm.INCLUDE_HIERARCHY,
arm.SCOPE_ID,
'UN-EXPANDED' as HIERARCHY_DETAILS
           FROM ADMIN_ROLE_MEMBERSHIP arm
         UNION ALL -- much better, and current table structure and query will always ensure unique values
         SELECT arm.MEMBERSHIP_ID,
arm.ROLE_ID,
arm.USER_ID,
oh.PARENT_ACT_KEY as ROOT_KEY,
arm.INCLUDE_HIERARCHY,
oh.CHILD_ACT_KEY as SCOPE_ID,
'EXPANDED' as HIERARCHY_DETAILS
           FROM ADMIN_ROLE_MEMBERSHIP arm, ORG_HIERARCHY oh
          WHERE arm.SCOPE_ID=oh.PARENT_ACT_KEY
            AND arm.INCLUDE_HIERARCHY=1
          ) arm_org,
        ACT ac
WHERE ac.ACT_KEY = arm_org.SCOPE_ID)
[2013-09-11T18:28:25.119-07:00] [OIM] [INCIDENT_ERROR] [UPGCMP-00924] [upgrade.OIM.OIM1] [tid: 13] [ecid: 0000K4FlzhH3n3N6yJaeMG1ICHRX000004,0] SQL error [{0}]
[2013-09-11T18:28:25.120-07:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM.OIM1] [tid: 13] [ecid: 0000K4FlzhH3n3N6yJaeMG1ICHRX000004,0] Cause: JDBC error while executing query
[2013-09-11T18:28:25.120-07:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM.OIM1] [tid: 13] [ecid: 0000K4FlzhH3n3N6yJaeMG1ICHRX000004,0] Action: Make sure DB is reachable and configured properly
[2013-09-11T18:28:25.120-07:00] [OIM] [INCIDENT_ERROR] [] [upgrade.OIM.OIM1] [tid: 13] [ecid: 0000K4FlzhH3n3N6yJaeMG1ICHRX000004,0] [[
java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
        at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
        at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
        at oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:2147)
        at oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:2091)
        at oracle.jdbc.driver.OracleStatementWrapper.executeUpdate(OracleStatementWrapper.java:320)
        at oracle.iam.update.plugin.oim.SchemaUpgrader.loadScript(SchemaUpgrader.java:245)
        at oracle.iam.update.plugin.oim.SchemaUpgrader.loadStoredProcedures(SchemaUpgrader.java:190)
        at oracle.iam.update.plugin.oim.SchemaUpgrader.doUpgrade(SchemaUpgrader.java:108)
        at oracle.iam.update.plugin.oim.OIMSchemaUpgradePlugin.upgrade(OIMSchemaUpgradePlugin.java:292)
        at oracle.ias.update.plugin.Plugin.upgrade(Plugin.java:358)
        at oracle.ias.update.plan.PlanStep.upgrade(PlanStep.java:292)
        at oracle.ias.update.UpgradeDriver.doUpgrades(UpgradeDriver.java:465)
        at oracle.ias.update.gui.UAUpgradeThread.run(UAUpgradeThread.java:41)

Hi,
The correct upgrade path is: 11.1.1.5.0 -> 11.1.2.0 -> 11.1.2.1

A Question while Upgrading..

Similar Messages

Maybe you are looking for