A question with a picture...

I am using this which works great
<img src="/images/${section}.jpg" alt="${section}" />
is there a way to use the c:choose and otherwise that if the picture is not found that it will default itself to another picture?

Someone sent me that link a while ago and it has nothing to do to what I am looking for,,
that site is about storing your images files to a another location or from a database which It's useless...

Similar Messages

Sony prs t2 sleep mode with showing picture

Dose sleep mode with selecting picture consume batt energy more than without showing one?
Thank you verymuch
Solved!
Go to Solution.

Thank you for your question - actually it really shouldn't make any difference. Battery power is consumed when an E ink display changes but not during the time the page itself is displayed, so matter what you have on the screen the power consumption should stay the same.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

How do I reset my apple id security question with out a rescue email

How do I reset my apple id security question with out a rescue email?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(101013)

Since updating to I.O.S7 on my ipad2 all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all?

all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resetting

Please see: http://support.apple.com/kb/HT1808 for further info. It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
Regards,
Steve

Preview of Ken Burns effect doesn't work with some pictures

I just recently installed a new graphics card (ATI Radeon 7500) on my Sawtooth, 1.2 GHz, so I could utilize the Ken Burns effect in imovie HD. It works but only partly. It works great but with some pictures the preview pane doesn't show the photo. What I see is a what looks like bad reception on an old TV (fuzzies and the picture is distorted so bad you can't even make it out). With other pictures the preview shows up fine. I'm sure I've loaded the drivers. What else can I do?

Hi Tonyy13.
I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

I updated to IOS 6 and now it is frozen with a picture of a cord to connect to ITunes

Hi I updated to IOS 6 on my IPod touch and now it is frozen with a picture to connect to ITunes

What happens when you connect the iPod to your computer and restore via iTunes?
If iTunes does not see your iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
*http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT

How can I send a text with a picture attachment on my new iPhone5c?

How can I send a text with a picture attachment on my new iPhone5c? It won't send or recieve!!.

Does your carrier support it?
Follow the steps in this guide.
http://www.imore.com/how-send-photo-using-imessage

Scrollable picture with other pictures attached to it?

Any ideas how and with what classes this should be done?
I want to make a GUI with largish picture in the background.
The size of the picture exceeds the size of the window
so it needs to be scrollable.
Then I want to have other smaller images on top of that.
These images should also move when the background is scrolled
and my plan is to be able to drag them around with mouse
(i.e. change their position in relation to the background picture).
I managed to create the scrollable picture, but weren't
able to display anything on top of it.
I'm using JDK 1.3.1 (and Borland's Java Builder 7)

All right, I managed to do it all. This Java is pretty quick to use
(when you know what class to inherit ;)
Here's the sollution for those draggable pictures
public class DraggablePic extends JLabel implements MouseMotionListener, MouseListener {
int clickPositionX;
int clickPositionY;
// constructors
public DraggablePic() {
    super();
    addMouseMotionListener(this);
    addMouseListener(this);
public DraggablePic(Icon image) {
    super(image);
    addMouseMotionListener(this);
    addMouseListener(this);
// mouse motions
public void mouseDragged(MouseEvent e) {
    super.setLocation(e.getX()-clickPositionX+this.getX(),
                      e.getY()-clickPositionY+this.getY());
public void mouseMoved(MouseEvent e) {
// mouse events
public void mouseClicked(MouseEvent e) {
public void mouseEntered(MouseEvent e) {
public void mouseExited(MouseEvent e) {
public void mousePressed(MouseEvent e) {
    clickPositionX = e.getX();
    clickPositionY = e.getY();
public void mouseReleased(MouseEvent e) {

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

Just a thought, but maybe consider returning the device. Seems it might be a bit too complicated for you.

Basic questions with respect to ABAP WebDynpro Application

Hi All,
I have two basic questions with respect to an ABAP WebDynpro application :
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Thanks & Regards,
Sushanth Hulkod

Sushanth Hulkod wrote:
> a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
>
> b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
Answer - By providing direct link of the WD application created in SE80, creating iView for webdynpro abap application in the portal environment and NWBC environment
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Answer - Yes it can be developed in ECC. Webdynpro ABAP is introduced in NW 2004s (SAP NetWeaver 7.0 or ECC 6.0)
Thanks,
Chandra

A question with a picture...

Similar Messages

Maybe you are looking for