A questions non-related to the topic

My question has nothing to do with "new to Java", but still wanted to know... Since Oracle is taking Sun, does that mean that they will change the certifications? I mean I have planned in taking 2 of them this year and working hard on that, so will the certifications still be the same and how are they going to do it - "Sun certified..." or "Oracle certified... " ? thx

RTFF. Both companies have clearly stated that until such a time as the merger takes effect and Sun operations are integrated into Oracle operations both will operate as independent entities.
All Sun activities will continue unchanged until that time.
And that time will be several months in the future, the meeting of shareholders to approve the merger isn't planned until I think July and after that they still need US government approval, EU approval (probably), SEC approval, etc. etc., which may well take the rest of the year if not more.

Similar Messages

  • I have just started with Pages and can get no satisfaction from Help. These are trivial questions but not knowing the answer in really annoying. First, how can I convert the cursor to a chunky arrow so that I can see it more clearly. Oops I ran out of roa

    This is second part of a qyestion: I am working on Airbook, how do I delete forward?

    You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
    This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
    Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
    Regards,
    Barry

  • None of my replies are showing up in the topic listings/My Posts!

    Hello all,
    Since last evening (11/26/05) none of my replies to user questions are showing up. I see new topics being posted and I try to reply but they have not shown up in either My Posts or in the topic listings.
    Is anyone else experiencing this?
    I don't see any mention of it here in the Feedback Forum as of yet...so.....?
    This is an odd situation as this topic may or may not show up in the listings or My Posts for me to even check back to find out what is going on so if I don't reply back you will know that I still cannot see any of the info.
    thank-you,
    littleshoulders [:-)

    Donald,
    I think the word is definitely...."evolving"....hold onto your seats folks...lol.
    Good to know that is all it must be.
    Best and thanks for the heads up about the banner announcement as I hadn't noticed it yet,
    littleshoulders [:-)
    edit: To explain further, I almost always use bookmarks for the forums I participate in and usually have little need to visit the main Discussions Home Page which I guess is the reason for missing the Banner Announcement there. I'll remember to check there first before posting about a Discussions glitch in the future. I should have known that.
    edit edit (and no I didn't stutter...lol!): I just went to check the banner and it does not show on "my" Discussions Homepage but rather:
    "Our discussion forums are filled with thousands of Macintosh and iPod users from around the world. Search for an answer, post your question, or answer other users' questions in the Apple Discussions community. If you need help using Discussions, check out the Help & Terms of Use link in the sidebar to the right."
    which is the only text above the Discussions forums links. Odd that you can see this and I cannot. Oh well, I will take the wait and see attitude and see what transpires for now. Let me know, if you would, if I am not looking at the correct location for the "Banner" that you speak of?

  • Questions/conditions/needs related to the PBX

    Dear Cisco,
    I act on behalf of my boss who is planning a larger IT investment, but needs some background information.
    So far, we used an open-source free PBX, but after we've recognised its deficiencies, we decided to buy a commercial product.
    To tell the truth, we hesitate between some products, and we need some confirmations related to the concerned PBXs. One of them is Cisco.
    So our questions/conditions/needs are as follows:
    The PBX needs to be an IP PBX.
    Basic PBX features that we need: conferencing, video calling, voicemail, call queuing, IVR.
    The type of all the desktop phone we use is Grandstream GXP 2000. The PBX should be compatible with this device.
    We have a special corporate VoIP SIP phone ("softphone") developed by Ozeki's third party SDK. I am confident that we will continue to use this SDK, so the PBX should be compatible with this software.
    And the last one: we would like to use Android smartphones as the part of our telephone system, so the PBX should support mobile extensions.
    Please indicate if there is a solution that fulfills the above requirements. If so, please suggest me the proper product/service here or send me an e-mail to [email protected]
    I wanted to post this message here intentionally, because any further personal comments/experiences coming from the community would be appreciated.
    Best regards, 
    Donna E. Hill
    [email protected]

    hi
    try SQADB01
    regards
    thyagarajan

  • HT5557 hello...my questions is related to objective C...Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

    hello...my questions is related to objective C..
    Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

    ashish35,
    No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
    Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
    Sorry and good luck,
    Clinton

  • Question related to the Federated Portal Network.

    Hi All,
    I have a question related to the Federated Portal Network.
    I have to configured FPN between two portals :
    1. BI-portal  (Producer Portal) (EP 7.0)
    2. Portal for other systems (Consumer Portal) (EP 7.0)
    Can anybody help regarding this, I need material or URLs   ...
    Thanks & Regards,
    Jay

    Hi Jay,
    Check out following links for fedrated portals
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/703cfbbd-e85e-2a10-00a3-ecd502c08e82&overridelayout=true
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527&overridelayout=true
    Regards,
    Vaishali

  • Question related to the  JAX-RPC.

    Hi ,
    I have a question related to the JAX-RPC API.
    Please clear me following points whether I am right or not?
    1. If my two end points are in Java then and only we use the JAX-RPC API. Is it right?
    2. If my two end points are in .Net then we use the some other API in .NET. Is it right?
    Please give me links or associate info. regarding this.
    Thanks,
    Rahul

    With JAX-RPC API, you are writing or consuming web services. If you are building web services, then that web service should be interoperable to .NET as well as Java. You do not have to use JAX-RPC, because, JAX-WS can serve the same purpose but is much easier to program. More about web services may be found at [http://soalib.com|http://soalib.com]

  • Please post documentation-related questions or comments on the

    Please post documentation-related questions or comments on the Performance Management Applications {forum:id=1318} forum     
    http://forums.oracle.com/forums/forum.jspa?forumID=1318

    I just got a call today that I reached my 300GB limit for the month.  I called and got a pretty rude response from the security and data usage department.  The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage.    This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often"   Not a good experience ... 

  • What's the difference/relation between a topic and a page?

    Hello all,
    I'm not sure about the relation between a new page and a topic: it seems that a topic can be composed of pages, but when I look at the topic's HTML, there's no new section (DIV) for the added page.
    Also, am not sure about the relation between the book and the topics/pages.
    Would be grateful if somebody could either point to reference material or provide a few clarifying words on this.
    Many thanks, Donna

    Hello again
    Okay, I'm interpreting that as meaning it really didn't make much better sense to you. I'll take another stab at it.
    When we create content in RoboHelp, we create what most of the world would know as HTML Pages. These are simple files that contain HTML code. And on the World Wide Web, they would be generically called Web Pages.
    But remember, RoboHelp is a Help Authoring application. Not a Web building tool. So while the tool (RoboHelp) actually creates different HTML Pages, in Help Authoring speak, we just call them Topics. Because we are typically describing something helpful. So this Topic is about clearing a paper jam from a printer while this other Topic is about How to Fill Out an Expense Report.
    So generically speaking, each of our HTML Pages in our project is known as a different Topic. Sometimes we mix the terms can call them Topic Pages. So they are sort of synonomous in that respect. HTML Page = Topic
    Now, part of building any respectable help system is the fact that you are able to create a Table of Contents (TOC). Each node (or entry) that is part of your TOC structure likely points to a different Topic in your project. But when we edit the TOC, we generically say we are creating a Page. (This is typically because the TOC most often uses icons that look like Open or Closed Books, with Pages inside each Book that individually point to Topics.)
    Hopefully that makes better sense... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Questions related to the localstorage=false client restarted and join back

    Hi, We are using the coherence 3.4.2 version. I notified a strange problem in our application, related to the coherence. I am posting here seeking for help. We are using JDK 1.6.0_16 on Linux 64 OS.
    To simplify the problems, let me just say that we have 3 JVM running as now. One is we called the data server, starting with following JVM settings:
    java -Xms1G -Xmx1G -server -Dlog4j.configuration=log4j.xml
    -Dtangosol.coherence.cacheconfig=/xxx/coherence_config.xml
    -Dtangosol.coherence.ttl=0
    -Dtangosol.coherence.log=log4j
    -Dtangosol.coherence.clusterport=5511
    -Dtangosol.coherence.distributed.localstorage=true The other 2 JVMs will use the same JVM settings as above, except -Dtangosol.coherence.distributed.localstorage=false.
    When I started the all servers in this order: data server -> one client jvm -> the other client jvm, I can see they all join into one cluster, and our application works fine.
    Now, if I shutdown client1 and client2, and restarted them, the problems comes:
    1) From the coherence log, I can see the client1 and client2 joined back in the cluster.
    2) But when client1 is trying to get cache using the following api:
    NamedCache cache = CacheFactory.getCache("cacheName");
    Object o = (Object)cache.get(id);The cache object is there, but without any elements in it. So Object o will always to Null. But I know in this case, there is one element in the case, which I just put in before restarted client 1 and 2.
    So in this case, I can get a cache object back, but without any element into it. This is not the case before the JVM restarted.
    3) In the above case, the cache is defined as a replicated cache as following:
              <cache-mapping>
                   <cache-name>cacheName</cache-name>
                   <scheme-name>ReplicatedScheme</scheme-name>
              </cache-mapping>
              <replicated-scheme>
                   <scheme-name>ReplicatedScheme</scheme-name>
                   <backing-map-scheme>
                        <local-scheme>
                             <scheme-ref>unlimited-backing-map</scheme-ref>
                        </local-scheme>
                   </backing-map-scheme>
              </replicated-scheme>
              <!-- Backing map scheme definition used by all the caches that do not require any eviction policies -->
              <local-scheme>
                   <scheme-name>unlimited-backing-map</scheme-name>
              </local-scheme>4) I tried to use the SimpleCacheExplorer example coming with the coherence to see if I can reproduce this case. But I can not. I use the same coherence.xml as our application. I used the same cache name in the SimpleCacheExplorer as in our application. I started 3 JVMs, one with localstorage=true, the other 2 with localstorage=false. Everytime, I restarted the other 2 JVMs, it can join back the cluster and get the value for the original key. So I am not sure which part in our application breaks this.
    5) I list the coherence log below from our application. I added 2-3 lines comments just to list what happened then.
    Any idea or hints about why this is happenning? Thanks for your help.

    Here is the log:
    ############ start the data server
    2009-11-19 14:55:07,389 Coherence  Logger@1398577124 3.4.2/411 INFO   2009-11-19 14:55:07.132/65.613 Oracle Coherence 3.4.2/411 <Info> (thread=http-8080-1, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/apache-tomcat-6.0.18/webapps/datacloud/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
    2009-11-19 14:55:07,389 Coherence  Logger@1398577124 3.4.2/411 INFO   2009-11-19 14:55:07.187/65.668 Oracle Coherence 3.4.2/411 <Info> (thread=http-8080-1, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/apache-tomcat-6.0.18/webapps/datacloud/WEB-INF/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
    2009-11-19 14:55:07,389 Coherence  Logger@1398577124 3.4.2/411 DEBUG  2009-11-19 14:55:07.187/65.668 Oracle Coherence 3.4.2/411 <D5> (thread=http-8080-1, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
    2009-11-19 14:55:07,389 Coherence  Logger@1398577124 3.4.2/411 DEBUG  2009-11-19 14:55:07.190/65.671 Oracle Coherence 3.4.2/411 <D5> (thread=http-8080-1, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
    2009-11-19 14:55:07,389 Coherence  Logger@1398577124 3.4.2/411 DEBUG 
    Oracle Coherence Version 3.4.2/411
    Grid Edition: Development mode
    Copyright (c) 2000-2009 Oracle. All rights reserved.
    2009-11-19 14:55:08,356 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 14:55:08.351/863.022 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-19 14:55:08.15, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30265, Role=ApacheCatalinaStartupBootstrap) joined Cluster with senior member 1
    2009-11-19 14:55:08,360 Coherence  Logger@9230760 3.4.2/411 INFO   2009-11-19 14:55:08.360/66.841 Oracle Coherence GE 3.4.2/411 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2009-11-19 14:55:08.15, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30265, Role=ApacheCatalinaStartupBootstrap, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xC3E1" with senior Member(Id=1, Timestamp=2009-11-19 14:40:47.04, Address=10.241.59.246:8088, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:29459, Role=NokiaDcServerDataServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service ExpiryService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSearchService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
    2009-11-19 14:55:08,386 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
    2009-11-19 14:55:08,387 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
    2009-11-19 14:55:08,682 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 14:55:08.681/863.352 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with senior member 1
    2009-11-19 14:55:08,686 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.686/67.167 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1
    2009-11-19 14:55:08,690 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 14:55:08.686/863.357 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=1): Service DistributedCache: sending ServiceConfigSync containing 258 entries to Member 2
    2009-11-19 14:55:08,693 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:08.693/67.174 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache: received ServiceConfigSync containing 258 entries
    2009-11-19 14:55:09,593 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 14:55:09.593/864.264 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8089,localport=37475]}
    2009-11-19 14:55:09,597 Coherence  Logger@9230760 3.4.2/411 DEBUG  2009-11-19 14:55:09.596/68.077 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=2): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=37475,localport=8089]}
    2009-11-19 14:55:12,673 Coherence  Logger@1144704103 3.4.2/411 INFO   2009-11-19 14:55:12.508/172.386 Oracle Coherence 3.4.2/411 <Info> (thread=pool-2-thread-1, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence.xml"
    2009-11-19 14:55:12,673 Coherence  Logger@1144704103 3.4.2/411 INFO   2009-11-19 14:55:12.514/172.392 Oracle Coherence 3.4.2/411 <Info> (thread=pool-2-thread-1, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
    2009-11-19 14:55:12,673 Coherence  Logger@1144704103 3.4.2/411 DEBUG  2009-11-19 14:55:12.514/172.392 Oracle Coherence 3.4.2/411 <D5> (thread=pool-2-thread-1, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
    2009-11-19 14:55:12,673 Coherence  Logger@1144704103 3.4.2/411 DEBUG  2009-11-19 14:55:12.517/172.395 Oracle Coherence 3.4.2/411 <D5> (thread=pool-2-thread-1, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
    2009-11-19 14:55:12,673 Coherence  Logger@1144704103 3.4.2/411 DEBUG 
    Oracle Coherence Version 3.4.2/411
    Grid Edition: Development mode
    Copyright (c) 2000-2009 Oracle. All rights reserved.
    2009-11-19 15:04:23,811 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
    2009-11-19 15:04:23,811 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
    2009-11-19 15:04:23,812 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
    2009-11-19 15:04:23,946 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:23.946/1418.617 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with senior member 1
    2009-11-19 15:04:23,953 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.952/62.391 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1
    2009-11-19 15:04:23,955 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:23.953/1418.624 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=1): Service DistributedCache: sending ServiceConfigSync containing 259 entries to Member 2
    2009-11-19 15:04:23,959 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:23.959/62.398 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache: received ServiceConfigSync containing 259 entries
    2009-11-19 15:04:24,513 Coherence  Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.351/181.083 Oracle Coherence 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence.xml"
    2009-11-19 15:04:24,514 Coherence  Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.355/181.087 Oracle Coherence 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
    2009-11-19 15:04:24,514 Coherence  Logger@879081272 3.4.2/411 DEBUG  2009-11-19 15:04:24.355/181.087 Oracle Coherence 3.4.2/411 <D5> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
    2009-11-19 15:04:24,514 Coherence  Logger@879081272 3.4.2/411 DEBUG  2009-11-19 15:04:24.358/181.090 Oracle Coherence 3.4.2/411 <D5> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
    2009-11-19 15:04:24,514 Coherence  Logger@879081272 3.4.2/411 DEBUG 
    Oracle Coherence Version 3.4.2/411
    Grid Edition: Development mode
    Copyright (c) 2000-2009 Oracle. All rights reserved.
    2009-11-19 15:04:24,546 Coherence  Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.546/181.278 Oracle Coherence GE 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded cache configuration from file "/datacloud/trunk/install/conf/coherence_config.xml"
    2009-11-19 15:04:24,760 Coherence  Logger@879081272 3.4.2/411 WARN   2009-11-19 15:04:24.760/181.492 Oracle Coherence GE 3.4.2/411 <Warning> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
    2009-11-19 15:04:24,786 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:24.785/1419.456 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8089,localport=48995]}
    2009-11-19 15:04:24,787 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:24.787/63.226 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=2): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=48995,localport=8089]}
    2009-11-19 15:04:24,882 Coherence  Logger@879081272 3.4.2/411 DEBUG  2009-11-19 15:04:24.882/181.614 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
    2009-11-19 15:04:25,118 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:25.112/1419.783 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer) joined Cluster with senior member 1
    2009-11-19 15:04:25,118 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:25.115/63.554 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=2): Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer) joined Cluster with senior member 1
    2009-11-19 15:04:25,120 Coherence  Logger@9242415 3.4.2/411 INFO   2009-11-19 15:04:25.120/181.852 Oracle Coherence GE 3.4.2/411 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xC3E1" with senior Member(Id=1, Timestamp=2009-11-19 14:40:47.04, Address=10.241.59.246:8088, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:29459, Role=NokiaDcServerDataServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
    2009-11-19 15:04:25,127 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.127/181.859 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member(Id=2, Timestamp=2009-11-19 15:04:23.541, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30753, Role=ApacheCatalinaStartupBootstrap) joined Cluster with senior member 1
    2009-11-19 15:04:25,131 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.131/181.863 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service ExpiryService with senior member 1
    2009-11-19 15:04:25,131 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.131/181.863 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSearchService with senior member 1
    2009-11-19 15:04:25,132 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1
    2009-11-19 15:04:25,132 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
    2009-11-19 15:04:25,132 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
    2009-11-19 15:04:25,133 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
    2009-11-19 15:04:25,134 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.134/181.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache with senior member 1
    2009-11-19 15:04:25,219 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:25.219/1419.890 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 3 joined Service ReplicatedCache with senior member 3
    2009-11-19 15:04:25,220 Coherence  Logger@9249408 3.4.2/411 DEBUG  2009-11-19 15:04:25.220/63.659 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=2): Member 3 joined Service ReplicatedCache with senior member 3
    2009-11-19 15:04:25,223 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:25.223/181.955 Oracle Coherence GE 3.4.2/411 <D5> (thread=ReplicatedCache, member=3): Service ReplicatedCache joined the cluster with senior service member 3
    2009-11-19 15:04:26,310 Coherence  Logger@9242415 3.4.2/411 DEBUG  2009-11-19 15:04:26.309/183.041 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=3): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8088,localport=58713]}
    2009-11-19 15:04:26,312 Coherence  Logger@9218328 3.4.2/411 DEBUG  2009-11-19 15:04:26.312/1420.983 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=1): TcpRing: connecting to member 3 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=58713,localport=8088]}

  • 5 tough questions relating to the monitoring software

    Hi guys,
    I'm writing this on behalf of one of our partners. They are having major problems setting up the monitoring software (v 1.0.0_200809). I have asked them to verify that they are using the latest firmware upgrades on the cameras and that they are running the latest version of the monitoring software. They have confirmed that this is the case.
    I have some doubts about this but perhaps you can help with the issues listed below.
    The following issues have surfaced:
    1. Issues with Graphic Card driver for Intel GMA945
    - if this driver is installed in a laptop the monitoring software (1.0.0_200809) will not inititate/start.
    The error message is: <or corrupted resource files.  Please reinstall to solve this problem.>
    Reinstalling the software will unofortunately not solve the problem. The only way to fix this problem is by removing the driver.
    Question: Is this the only way to get the monitoring software to work and is this a known issue?
    2. The new version of the monitoring software is unable to find the cameras using "search" functionality. The only way to configure tha camera is to do it manually.
    Question: Is this a known issue and how should I truobleshoot this?
    3. The cameras will not store the video feed on the Cisco NAS servers if the monitoring software is shut down. I remember from previous discussions that this should be possible but my partner is unable to get this fixed.
    Question: Are there any instructions for how to set up the cameras so that the video feed is still being stored on the NAS despite closing the monitoring software?
    4. In order to setup an ftp -feed to the NAS server, each camera needs to be configured manually. According to the partner this can not be done centrally using the monitoring software.
    Question: Is this really the case?
    5. According to the partner, it is not possible to use the monitoring software to view stored material that has been transferred using ftp.
    Question: Is this really the case?
    Many thanks in advance!
    Rasmus Almqvist, Cisco Systems Finland

    Hello and sorry for my delay in responding (Was on Vacation).
    1) I have seen the problem you refer to and the way I got around it was to change the screen resolution, believe it or not.  I remember lowering it to 1280x800 and even have it working at 1400x1050.   That is a weird problem, and I did report that to the BU who I believe told NUUO, but for now this is the only workaround.  Uninstalling and reinstalling will not help, as you realize now.
    2) The new Utility WILL FIND all SB Cameras it supports on the LAN.  So if your PC is connected to the LAN and can route (ping) the cameras, it can find them.  Note: xVC2300 require FW upgrade to V1.01 to make them work.   WVC200 will not be recognized at all.
    WAN Monitoring of course will require manual config and port forwarding to an alternate TCP port (PVC300) or an adjusted TCP port (xVC2300).
    3) Correct.  If your it off, it wont record.   This is really menat to be on a dedicated PC that should always be running, so is per design, and I do realize the old utility worked as well when off, but this new one is much improved in other areas and is still free :-)
    The Camera itself can send montion detection or scheduled recordings to an FTP Server (NSS2xxx, NSS3xxx) regardless of the presence of the SWVMS16, so yes, the camera can do this too (Simultaneous; dual stream; dual codec).
    4)  Setting up the FTP client on the Camera and the FTP Server on the NSS is done with a WIZARD or manual config on the elements and is totally separate from SWVMS16, which is an additional capability.
    5)  The SWVMS16 will only save information (video) it records, so is separate fromt he FTP sourced files from the camera. To access the FTP files, just add the NSS to your network neighborhood on the NSS and browse the files (CIFS or NFS) as you would if they were on your own PC.
    Steve D
    Systems Engineer
    Cisco Small Business Sales

  • The topic of scoring to film with logic...

    Hello everyone,
    I wanted to get a little discussion started on the topic of scoring to picture and how people here do it with logic.
    My experience with this has been quite on the side of frustration, and I've always thought "wow--- is it really this dumb?.. It CAN'T be this dumb.."
    So, when I talk about scoring to film, the biggest issue is the scene change-- something might be building and building and tempos increasing and rising and rising, and then suddenly BAM.. scene change, slow ambient music... Then scene change, fast paced intense music... When dealing with creating music notation for something like this, it's especially important to make sure that the note events are strict in time and on the beat (quantized, etc) so that your scores make visual sense and players won't hate you. "Yeah-- umm this 32nd note really is a quarter note happening over here.. But.. You know how Logic is.."
    My thought always was-- if Logic just had a "create downbeat" operation, it would solve all of these problems. You could have a section of music that abruplty ends at Measure 175 on beat 2.7431 and force 2.7431 to become measure 176-- and then you could assign a new tempo, a new time signature, etc.
    Logic's manual likes to talk about using tempo operations to achieve this, but this is when I ask "is it REALLY that dumb?".. I mean to be required to have a zillion crazy tempo changes in order to bypass beat 2.7432 through the end of beat 4, just seems counter intuitive, non-user friendly, and completely non-musical.
    So... I am asking, how do you guys feel about this, and how do you deal with it.. Am I the only one who thinks this is dumb?
    -patrick

    There has been no improvement or change in automation behavior between 7.x and 8.x, unfortunately. If anything the behavior has gotten buggier/worse in L8. But that's a different story and not related to what I mentioned previously about beat mapping.
    Automation data is time-stamped when it's written; but if you change the tempo after the fact, the spacing between notes will either compress or expand. Therefore, automation data (TBA, track-based automation) is "malleable" with respect to tempo changes. This actually makes sense to a certain extent, but it's not a good paradigm for automation to operate under when you've got automation data associated with specific regions. To put it more simply, if you lock a region and there's automation associated with it, the region will be locked but not the automation data.
    The workaround, as you hinted at, is to convert your TBA automation data to region-based automation data (RBA) prior to commencing tempo change operations. This is exactly what I do in this case, and it's become a regular part of my routine. It's kind of a PITA process, but absolutely necessary if you want to preserve your automation data prior to commencing any edits to the tempo.
    The procedure is to create an additional track for every track in your arrangement. If you're doing big orchestral stuff, for example, you may have dozens if not hundreds of tracks, maybe within folders, etc. That's where the "PITA" part comes in. But anyway, once you have a duplicate of every track in the arrangement, use the pencil tool to create a blank region on once of those tracks. Extend that region to go a little beyond the end of the arrangement. Use the color palette to give it a color that's not used for any of the other regions in your arrangement (you'll see why soon).
    Copy that blank region to every single one of those duplicate tracks. Then, with one of those blank regions selected, use the "select similar color" key commands and all of the blank regions will now be selected. Then invoke the command to move all automation data to region data.
    Finally, Select-ALL and tjem SMPTE-lock all of the regions in your arrangement. At this point you can change tempo/commence beat mapping with impunity. (For S&G's, if not for safety, check the "protect MIDI" checkbox in beat mapping prior to doing any beat mapping operations).

  • Copyright question for posting to the web

    hi all.
    i am wondering if someone wouldn't mind giving me a bit of expertise on a question i have.
    i have a set of images from various sources that are basically creative imagery. i have organized these and i would like to share them by posting them to an album on my flickr account.
    i have named the files with the topic and the photographer and i am wondering if it is likely to create a problem. in /most/ cases these images are actually from the New York Times so the file name says "architecture house_ray jones NYT.png" or whatever.
    is there a hard rule against this? is it possible to give attribution in the photo explanation and be OK?
    thanks for any advice.

    You'd have to contact the copyright holder to find out what you can do with the images.
    from the NYT website:
    2. CONTENT ON THE SERVICES
    2.1 The contents of the Services, including the Site, are intended for your personal, noncommercial use. All materials published on the Services (including, but not limited to news articles, photographs, images, illustrations, audio clips and video clips, also known as the "Content") are protected by copyright, and owned or controlled by The New York Times Company or the party credited as the provider of the Content. You shall abide by all additional copyright notices, information, or restrictions contained in any Content accessed through the Service.
    2.2 The Services and Contents are protected by copyright pursuant to U.S. and international copyright laws. You may not modify, publish, transmit, participate in the transfer or sale of, reproduce (except as provided in Section 2.3 of these Terms of Service), create new works from, distribute, perform, display, or in any way exploit, any of the Content or the Services (including software) in whole or in part.

  • How do I can my rescue email address? I was asked to answer my security questions, but I forgot the answers and realized my rescue address was outdated. I tried adding alternate email addresses, but my faulty rescue address remained the same.

    I tried to change my rescue address, since it is outdated, and was not receiving any of the emails from Apple to this faulty address regarding resetting my security questions.
    I cannot proceed in regaining full use of my account to make purchases if I do not reset my security questions, and I cannot reset them without receiving such an email, and I have no idea how to change my rescue email. The Apple ID support section of this site was unfortunately unhelpful and led me in circles.
    Please help me to change my rescue email address!
    If it helps, a few months ago I changed my primary account email, and my old primary address is my faulty rescue address now. It is no longer on my list of addresses but continues to show up as my rescue address.
    An additional portion of my question: Is it possible, if I terminate one Apple ID, to move purchases made on that ID, to a new ID? I'm not sure if it's a violation of the terms and conditions if DO NOT keep the purchases on two accounts simultaneously.

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Ask for security question but they send the email to my other second account ! Not the same email which i logon it

    I had a weird problem i have two id apple account one of them i forget the security question i try to ask for reset but when i login to first email and ask for reset they send the email to other email which is in other account !! I need it to send to the same email which i login through it i do not know how they know the other email is my second email
    Now i can not reset my security question because they send it to other email which has been hacked !!        

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

Maybe you are looking for

  • Burning Flash movie to DVD

    Hi I am creating a flash animation to be projected. I have to burn in onto a dvd. I have tried converting the .mov file that flash exports, and flv to mpeg. The preview looks fine, but every time the dvd quality is terrible. I have tried HD, h. 264,

  • Wakes from sleep by itself

    I have a 20" iMac (Intel Core 2 Duo) and an issue appears to have started after the recent software update (not sure if this is the culprit). My iMac wakes unexpectedly after being at sleep (sometimes after 10 mins sometimes a bit longer). I have NO

  • Long lines corupt script output

    When SQL run as Script (F5) produces too long lines any Script Output gets blank. Text is there in tab Script Output and I can copy and past it but I can't see it. What setting could affect this? --This SQL is working fine select rpad('Test1',4000),

  • Problems after Firmware update

    I have a big problem with my ipod nano, @ the firmware update it disconnects from pc and now it didn't work anymore because of a mistake in the firmware what can i do? please help me

  • Why before my firefox i was able to book mark and orgainze my bookmarks now when firefox updated to 26 ,i can't bookmark anything

    i was able to bookmark a web page and add it to "personals" files and open a folder where i wanted the bookmark to be even add a bookmark to my tool bar so I could get to a web page , Now I cant even bookmark a page?