A quick oc basics (noob?) question

Hello boarders
Just bought this k7n2 Delta L board and after all the ram bulls**t I finally got it up and running tried overclocking da mufu but to no avail I've read about jumpers and cmos clearing, but I would like to know a fsb, vcore, and multiplier that'll work. I know, no pain no gain, But I's poor now and can't afford a serious
mistake...

Welcome to the forum, slabbage. I just wanted to advise you to create a signature w/ all your system's specs, and to invest a half hour or so reading all the Stickies, and guides at the top of each thread. That way you will get more effective assistance. Also you can do a search on the forum w/ the key words you are looking for help with. Lately the Moderators have had to take on even more work, b/c the forum is so popular, and they are a little tired of asking for signatures w/ system specs, as well as directing people to the same stickies over, and over again. Don't get me wrong, they, and I and everyone else are happy to help, and I for one am always impressed by people who are making the effort to become PC savvy and help themselves. I just don't want the MODS to get understandably frustrated after giving so much to so many. Take, care!
damon69

Similar Messages

Switching to mac, basic noob questions

Hi, I'm new to this. I have some xmas and bday money and i need a laptop. I have two desktop PC's (one XP and one Vista) and have had PC's all my life. I feel like switching it up and giving macs a try, it would make my purchase more fun. I've done some research and i think i want the black macbook with 2 gigs of ram. Here are some questions i need answered before going much further.
1.) I notice that every 6 months new macbook models come out. I also noticed that the last three (at least) have been very similar in hardware. Is it common that the new macbook probably coming out in the summer will be unvieled at macworld? If there is a big difference i might wait, i don't want to get the last model in a product line. Id the difference is another slight processor speed increase i won't bother waiting. As far as i know this isn't available information yet, so i'm just looking for a 'usually they do/don't' type of response.
2.) Is the apple care support really all it's cracked up to be? I'm not about to let my purchase go to waste on me, but at the same time if the support is rarely needed i might not bother. I'm a student and don't have too much money to blow if it's usually a waste. I generally like getting the warrenty for my things, i'm just looking for a more experienced opinion.
3.) Are the Apple stores in the Best Buys independent from Best Buy, or are they the same? I would like to put the 900 or so dollars i can down on this and put the rest of my best buy card to pay off over the next few months.
4.) If they're the same, does anyone know if the apple computers fall under best buy's "no interest for blank months of purchases over black?"
thanks!

Hi Thomes08!
Welcome to Apple Discussions.
It sounds like you're in the process of making an excellent decision to go with a 2.2GHz "BlackBook" and up your RAM to 2.0GB. I think you'll be extremely pleased with your purchase.
1.) Unfortunately, these forums are not designed to be used as a means of product speculation. Matter of fact, it's against the Terms of Use (of these discussion pages) to speculate on upcoming product releases. We'll have to wait the 2-weeks for Mac World to see what comes out, there's no way to have any insight into the excitement that Steve's Keynote brings to technology.
2.) I'm a big fan of AppleCare, mostly because it ensures peace of mind over the reliability of my product for the 3-years that it'll serve as my primary machine. While, I've had multiple Macs last beyond 3-years, I also typically swap it out for the "latest and greatest." Especially with a portable and your student discount. The cost of APP for a MacBook is a relatively "no brainer" especially if you consider the cost (for parts & labor) of even the most basic repairs if the machine falls out of warranty.
3. I'm not entirely familiar with the logistics of the agreement that Apple has with Best Buy, so I'd rather not speculate. I do know that Apple also offers financing options through BML (Bill Me Later) and Juniper Bank, but I'm unfamiliar with the specifics of a split payment. Buying an Apple product through Best Buy still entitles you to all the same "benefits" of ownership, so there's no advantage (or disadvantage) to shop @ Best Buy.

Very basic noob question about understanding class creation

After learing some procedural scripting I just started with understanding OOP and have a problem with a basic stuff like this. Why my Try.as below is not working when I type Try(1); in the main file. Output says: Type Coercion failed: cannot convert 1 to Try
package {
    public class Try {
        public function Try(some:Number) {
            some += 1;
             trace (some);

use:
var s:Try = new Try(3);

Basic iPhoto questions:

I have some Basic iPhoto questions before I start using the program:
- does iPhoto apply any compression or change images in any way when they
are imported?
- after images are imported, can the original source folder of images be deleted off of the mac?
- can Quicktime files exported from iPhoto be viewed on a Windows computer?
- can iPhoto handle large resolution images that might be as large as 8-15mb each? does it display them quick? are there any known file size issues?
Thanks!!!!

kat.
Is there a way to use iPhoto on a network so other users can read and possibly write to an iPhoto library on a networked mac?
iPhoto is a consumer level photo organiser, not a server. It's possible to share photos but libraries are very difficult and fraught with the danger of database corruption. Some have reported success.
Is it possible to password protect or secure certain images in the library so they can not be seen by anyone?
No. The best I can suggest there is to create a second library and store it in a secure area like a protected dmg. But remember, you can only have one library open at a time.
After photos are deleted from iPhoto, are there any remaining traces or cached files anywhere other than the trash
If you delete photos from iPhoto and empty the iPhoto trash then the pics are removed from the Finder as well. They remain as findable as any other deleted file from that point, which is, very, if the searcher in knowledgeable.
Regards
TD

Noob questions...windows emulation on mac OS 10.4

getting my ibook later this week and was wondering about windows emulation. i don't have an intel processor in my ibook (obviously), so what's your recommendation for a product that runs windows on a mac? and, total noob question, do i have to buy a copy of windows? i already have windows on my dell laptop.
thanks in advance for your help.

Hello,
so, do the new macbooks have some kind of software
pre-installed that runs windows? my friends who just
got a macbook tells me he can run windows programs if
he needs to.
The MacBooks have Intel processors in them. So, no emulation is necessary. They can directly install and run Windows if they want.
The reason you need a program like Virtual PC on an iBook is because it uses a PowerPC processor which Windows cannot communicate with. And, the PowerPC Mac's architecture is completely different.
So, that means you need a program like Virtual PC to completely emulate an entire PC computer. Basically, it is a program that simulates a real computer and then translates those Intel instructions into PowerPC instructions that your iBook can understand.
There is a severe performance penalty for all this translation. The iBook G4 will not perform like a regular Windows PC. It will be much slower, and you will need to be more patient. With a G4 iBook, you could reasonably expect your performance to be comparable to a 300 MHz PC running Windows XP.
With a 1.8 GHz iMac G5 and 2 GB of RAM, I was experiencing performance comparable to a 1.3 GHz Intel Celeron system with 256 MB of RAM (which I happened to have around for comparison).
But, for more intensive tasks, the performance was more comparable to a 500 MHz system.
Anyway, back to the Intel Macs. Those machine's only need a free Apple Utility "Boot Camp" to provide the drivers and create a Windows compatible boot partition:
http://www.apple.com/bootcamp/
And, then they need Windows XP Home or Pro. That's it.
With programs like Parallels, they can run Windows inside the Mac OS (or along side it) much like you would with Virtual PC:
http://www.parallels.com/en/products/workstation/mac/
i am trying to figure out where this might be useful
in the first place.
It is useful if you need to be able to run Windows software, but don't want to buy a PC. It's more convenient to have one machine that can do everything than it is to have a Mac and a separate PC.
Feel free to ask additional questions if you have them. Or, if you like, hit solved on the post if you feel everything is answered.
But, do let me know if I can answer any additional questions or need to re-state something clearer.

Openbox noob question on menus.

I really do apologize about this insanely noob question but this is driving me up a wall.
I've read several several different resources on openbox (particularly trying to find information on the root menu)
i'm either looking in the wrong place - or I totally saw it and didn't put 2 and 2 together. *shrugs*
so, here is the dealio -
I'm trying to edit the root menu (or as I like to call it right clicky drop down thingy)
I'm running LXDE and from everything I've gathered over the last couple of days trying to tackle this
with lxde you edit the lxde-rc.xml instead of the menu or rc.xml
although after reading through it a plethora of times I noticed that it pulls off of the menu.xml as well...
*basically*
Which file do I actually edit to add stuff to the root menu?
and i've seen dozens of actual templates for editing the menu.xml and lxde-rc.xml but whenever *I* try to follow that I get a syntax error on openbox --reconfigure
and insight or even a swift kick in the ass that will land me on a site that has info that actually works would be ever so appreciated (even if its a search term - I think my problem now is that i've spent so much time looking for this one thing that I might actually be insanely over complicating this and not picking out the right information )

stlarch wrote:An easy way is to install obmenu
I can agree with that even though I'm not sure how to use that program very well. I'd rather learn how to manually edit the stuff, and not have to rely on another program
the main reason I got away from ubuntu was to be semi/forced to learn everything.
JackH79 wrote:Have you read this here as well?
I did glance at that but didn't think that was referring to the root menus...I can decifer through the xml those menu files to some extent...the stuff on freedesktop is straight crypic to me atm...but at least now I know I need to take a much closer look hehe.

Adding Date/Time Field + X Number of Days - Basic Calculation Question

I am assuming this is a basic calculation question. New to Adobe LiveCycle Forms.
I have a simple form containing a table. The table appears as such:
Text
Formatted as Date/Time Fields
Header 3
Monday
user wil choose the beginning date (Date/Time) this is DateTimeField1
Tuesday
this should calculate DateTimeField1 + 1
Wednesday
this should calculate DateTimeField1 + 2
Thursday
this should calculate DateTimeField1 + 3
Friday
this should calculate DateTimeField1 + 4
Saturday
this should calculate DateTimeField1 + 5
Sunday
this should calculate DateTimeField1 + 6
Calculations are performed after the date is chosen for Monday. My mind tells me the simple calculation of DateTimeField1 + 1 is not going to work (and in fact doesn't!) as it needs to change Monday to a number first. I saw on another thread the following:
Num2Date(Date2Num(Date(DateTimeField1), "DD.MM.YYYY")+7, "DD.MM.YYYY")
Thought this was going to get me close. No cigars though!
Any quick help is greatly appreciated. And since I am new to this, details about what needs to be changed would be great too!
Thanks

Here an addition for you date field.
This FormCalc script in the exit:Event will check it the selected date is on a monday.
If not it will go the days back until the last monday.
var Selection = Date2Num($.formattedValue, DateFmt(2))
var WeekDay = Num2Date(Selection, "E")
var NewDate
if (WeekDay eq 1) then
          NewDate = Selection - 6
elseif (WeekDay eq 3) then
          NewDate = Selection - 1
elseif (WeekDay eq 4) then
          NewDate = Selection - 2
elseif (WeekDay eq 5) then
          NewDate = Selection - 3
elseif (WeekDay eq 6) then
          NewDate = Selection - 4
elseif (WeekDay eq 7) then
          NewDate = Selection - 5
else
          NewDate = Selection
endif
$ = Num2Date(NewDate, "EEE DD.MM.YYYY")
Hope this helps, too.

Noob Question Re: Encoding to DVD

This is my first post in the adobe forums , so hello all!
I've been trolling this, and numerous other sites, hoping to understand the basic process of editing -> CD creation.
So here it begins...I am working on "work-out" video tape. The footage was shot using a Canon H10 to removable memory card. All files are .MTS, which don't pose too many challenges for my computer (i7 processor w/ 6MB memory) after the most recent PP update. Editing, adding AE, titles, graphics, or using Sound Booth is relatively painless. I have a total of (4) timelines that comprise the total video (Trailer, Intro, Instructions, and Workout). As I edited the video I'd often render what I had testing formats such as avi, MPEG2, FLV/4, Blu-Ray H.264, etc. I was amazed with the clarity and sharpness as I stayed with in the confines of 1980x1020. So I have no problems there. Once the editing, I first created a blank timeline and pulled into it the other timelines to make on timeline called "Video Complete". I dynamic linked that timeline to Encore and found out that amount of data, in that format, created a very unstable Encore - it screamed and hollered about running out of memory, etc. I watched several tutorials and found that dynamic linking the indvidual timelines gave me a much more stable Encore.
So I had the untranscoded .MTS files in Encore. I created my menu, linking the timelines, etc and built my project using the standard 720x480 (I believe) format. To say the least, I wasn't at all happy with the final product when watched on the television. Very pixalated/jagged around letters, etc.
I don't mind shopping around for the correct answer or putting my time in on research, I'd just like to know if I am on the right playing field and/or headed in the right direction.
So basically my questions are:
1) Is dynamic linking .MTS files to Encore the correct approach as opposed to rendering the .MTS files in PPro to avi or MPEG2 before bringing them into the Encore project? (Based on wanting the best DVD quality possible)
2) Transcoding settings for individual timelines should remain on automatic or should I adjust them and transcode before clicking on build project?
3) Since I was able to see MPGE2 renderings (from PPro) on my computer screen as sharp and clear, should I expect the same quality from a DVD product?
Any information would be helpful - thanks so much.
Joe

Re: Noob Question Re: Encoding to DVD
Hi, great questions:
I think this is a sound approach. MTS is short for MPEG-2 Transport Stream, so it's already MPEG-2 but will of course have to be re-transcoded for DVD to standard definition. If you want to experiment with high definition, you could try stripping the streams out of the MTS using a third party tool such as what you might find at videohelp.com - or not. Less transcoding is always better, but may not be practical. There's probably little advantage to doing this on the DVD side, but it might be worthwhile for Blu-ray? Or not.
First, try using Interpret Footage on the asset (the MTS file itself) - set it to SD Widescreen. You may need to Revert to Original if it's already transcoded. Try building another DVD and check the footage.
For the most part, yes. Of course, they will be standard definition on DVD.
Message was edited by: jbowden
Jbowden,
Thanks for the response. I will check out "Interpret Footage" on the asset of the MTS file and toggle to SD Widescreen. Will do that tonight so I can compare the two for quality.
Joe

Syncing & Streaming from the same Library? - Noob question

Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
Thanks for taking the time to answer these silly questions.

That's not quite what I was looking for.
My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
I guess I will just have to play to try it out.

Object class deployment - Basic form question

OK, I subclass calendar object from Oracle provided standard
object class. What do I need to deploy to use this form now
apart from calendar.pll and my fmx. What about the object class
from which I sub-class. Do I need to compile and deploy that
also? How will form resolve this on run time the parent object
class as I really did not copy, just sub class and we do not
deploy original class? Basic form question. Thanks.

You can set the "help" property on the field (which gives you the little "information" icon link beside the field).
You could also try adding another field of another class above or below:
<Display class='InlineAlert'/>
<Display class='ErrorMessage'/>
<Display class='HtmlPage'/>
..etc
-Rob

Another Noobie question - readLine()

Hi all
This is another one of the extreme noob questions. I wrote a small program to read form a text file
    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){
            NetworkLine = in.readLine();
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }My Test.txt is
One
Two
Three
Four
Five
Six
without the *
The output I get is
Two
Four
Six
I cannot figure out why only even no. lines are being read. I inserted a breakpoint at the line
          System.out.println(NetworkLine);This shows me that only even no. lines are being read by readLine(). Any help will be appreaciated.
Thanks
Ayesha

    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){ // <-- This reads a line, checks it for null ,and drops it
            NetworkLine = in.readLine(); // <-- this reads the next line
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }So the upshot is that you print every other line.
Corrected:
    String networkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while ((networkLine = in.readLine()) != null){
            System.out.println(networkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }

Noob question use dng converter or let LR convert to dng

Sorry for the noob question but I'm transitioning over to LR from aperture and I believe DNG is a good move for me. Now then, is there any advantage to using the converter over letting LR do it?

It really is the same integrated tool, yes. All the same preferences are there.
The only thing I am not aware if Lightroom can do is Extract Embedded Originals. But that's not something I'd ever do to my own RAW files.
Cheers

Noob Question: Flowing Input Dataset Row/Record IDs Through to the Score Model Output

I've got a noob question that I'm having difficulty finding the answer to: if my input dataset contains row/record IDs and I want to flow these through to the Score Model module output but *don't* want to include this column in model training (because
it's just an arbitrary row tag), how do I go about accomplishing this?
I am able to Project Columns and eliminate the IDs entirely early in the process but then can't really determine which input row a prediction is associated with because I've lost the IDs. I'm not quite sure how to accomplish what I'm trying to do via
the Metadata Editor, either.
Surely somebody else has dealt with this same question. If the solution is implemented somewhere in a Gallery experiment that you'd like to point me at, too, that would also be just as good as a written explanation.
Thanks in advance,
Kevin

Hey Kevin!
Sorry for making this process unclear :( Azure ML has a notion of Feature Columns
(by default everything is a Feature), that is columns/variables that are intended to be treated as part of the observation vector. You can use the Metadata Editor
and (after selecting the column(s) you want), mark the column as
Fields -> Clear Feature. This will have the semantics you desire - data attached to the input data while not being used for training.
Regards,
AK

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

Noob Question - PreComp Layers and Effects

I have precomposed a layer and am wondering why when I apply an effect inside the precomposed layer, it cannot be seen in the main timeline... for instance, I've created a logo on a billboard and precomposed the layer. I added it to the timeline and all is fine. Now, I tried to apply a 'vector paint' effect to a layer inside the precomp. It looks fine in the precomp, but it disappears in the main timeline. Also, I added trapcode particles inside the precomp. They do not show up in the main timeline either. Any advice would be much appreciated. Thanks to all.

I see them in the precomp but not in the main time.
Date: Mon, 29 Jun 2009 16:11:50 -0600
From: [email protected]
To: [email protected]
Subject: Noob Question - PreComp Layers and Effects
Do you see them when you clic on the "continuosly rasterize" button of your precom. it's the little "*" icon of your precomposition.
>

A quick oc basics (noob?) question

Similar Messages

Maybe you are looking for