A/R, A/P and MM for the periods

Dear All,
I closed all periods for A/P, A/R and MM for July 2009 so no-one could post to them. However, because the GL was still open for June, July and August, it allowed others to post to A/R; A/P; MM. When closing the periods we have to leave the GL open for month-end closing Journal Entries. How do we keep others from posting to what we believe were closed periods?
Please clarify me.
Regards
Partha

Look here,
     From Acct     To acct.             Fr period     Year     To period     Year
+                                                       7     2008     8     2009
A                    ZZZZZZZZZZ     1     2009     8     2009
D                    ZZZZZZZZZZ     8     2009     8     2009
K                    ZZZZZZZZZZ     8     2009     8     2009
M                    ZZZZZZZZZZ     8     2009     8     2009
S                    ZZZZZZZZZZ     7     2009     8     2009
This is the case, system alowing to posting June and July also.
Regards
Partha

Similar Messages

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

I have an iphone4. every time i turn it on i get an old I.D. and a message saying, "Apple password " then my email address and asks for the password. I have a different account that itunes on my computer recognizes. How do i remove this from my phone?

i have an iphone4. every time i turn it on i get an old I.D. and a message saying, "Apple password " then my email address and asks for the password. I have a different account that itunes on my computer recognizes. How do i remove this from my phone?

to remove that account.
go to settings > iTunes & App Stores > click on that apple ID then sign out.

Unsupported version Error while generating header and footer for the PDF

hi
I want to genrate header and footer for the PDF file however on the call of the EndPage class i got a Unsupported Version Error Unsupported major minor Version Error and Class loader Define class
What has gone wrong ?.

Can you provide more information about what you were trying to do? In particular, what does your code like like?
Also, can you include the stack trace, and the complete error message?

I just bought a macbook pro and qualified for the free Mountiain Lion update. How do I download the software on my laptop now that I've received the password for the content code file.

I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you

marsrover25 wrote:
I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you
Sign into the App Store with your Apple ID. App Store should be in the Dock.
Cheers
Pete

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

BED, AED and SED for the excise item is zero

Dear ALL,
I am working on IMPORT MATERIAL GOODS RECEIPT,
While doing MIGO in excise item tab BED, AED, SED values are visible and material document is generated, but while posting PART1 ENTRIES through J1IEX System is throwing error" BED, AED and SED for the excise item is zero" and the excise values are not flowing in to PART1,
IN J1IEX PART1 Entries
1.IN DUTY RATE TAB all the entries like BED, AED, SED are zero,
2. IN DUTY VALUES TAB all entries are zero
ERROR MESSAGE NO 4F122
Please suggest
ARABBAS

Dear,
Please check this,
[Excise;
[BED Value not defaulted in GR;
Sandip

MAC OS Yosemite - CS6 - A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one

- A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!

Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

A/R, A/P and MM for the periods

Similar Messages

Maybe you are looking for