A/R Delivery Note: How to use different COGS account than default

Hi,
when doing the sales delivery, i can change the GL account at the line Item.
Some item i want it go to the default GL account but for the COGS acct i want it "TO GO DIFFERENT COGS ACCOUNT"
I created a new screen for this.. but i stuck there..
Is there any way i can do this?
Thanks in advance..
Bruce..
Message was edited by: Frank Moebius
Changed subject since "Any idea?" might not be too specific

Hi Bruce
The best way to do this is not with development. You can set your gl by wh,item group or items. If the item belong to a specific group. Then make that item group with that certain gl acc determination and when posting documents sbo will do the rest. If it's specific items, then just do the gl acc determination on item level for those items. You can specify in detail for each item which sales,cogs,ect accounts to be used.SBO will do the rest again.
Hope this helps

Similar Messages

How can I use different iTunes accounts on one iPad?

How can I use different iTunes accounts on one iPad?

You can't, well not easily anyway. The iPad is not meant as a multi account device.
You can Sign Out of your iTunes account in Settings->iTunes and App Stores->Apple ID->Sign Out
However if you sign in with another ID and then download past purchases with it you will lock out the previous ID for 90 days. Which means it will not be able to be used on the iPad for 90 days.

How to use different page scapes in smartforms

hi
How to use different page scapes in smartforms.
I want Potrait format in the 1st page and Lanscape format in 2nd page is it possible if so plz suggest me an idea

Hi,
It is possible in smart forms, but not in scripts.
we can have 3 tabbed options for pages in smart forms.
General...
Output options
Conditions.
In output options u can define whether a page can portrait or land scape in print attributes.
Reward if helpful.
Regards,
Sandhya

HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

Use it the same way as previously.
ctrl B shows the menus.
ctrl S shows the sidebar.
What else do you need help with?

I need serial no not how to use ps

I need serial no not
how
to use it

What do you mean? Do you have a redemption code and need to get a serial number? Try this:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Another "This itunes account is set up to use family sharing with a different icloud account than Apple ID "

I saw another thread on the matter but thought I would post because the circumstances are different. Here is how it happened.
I have had an Apple Store account for years and until recently our family has only had our one Mac and my iPhone 4. Thus any purchases we have made on the Apple App Store were made only with this account.
We recently purchased two iPhone 5S's--one for my wife and one for my daughter. Neither had Apple IDs so first we set up my wife's iPhone and created an Apple ID for her. Next we used the Family Sharing feature to set up an account for our "under age 13" daughter.
Because I am still waiting for my iPhone 6 Plus to arrive, and because the iPhone 4 cannot upgrade to iOS 8, and because my Apple ID is the only account with any apps that have been purchased in prior years, I set up my wife as the Family Organizer but when I set up her account, I chose the option to "share purchases from a different account" and entered the information for my Apple ID.
My daughter is able to view my prior purchases on her iPhone, but when my wife tries to view my prior purchases, she receives the message "This iTunes account is set up to use Family Sharing with a different iCloud account than <her Apple ID>."
I hope Apple is reading this. I would be more than willing to help them on this one as this feature is one of the main reasons I put our family on iPhones.

I had this problem. I finally figured it out yesterday. Try this:
On the device that is having trouble seeing purchases, go to Settings>iCloud>Family Sharing> Then tap on the user of the device you are on. Under "Family Purchases" make sure it has the AppleID of the person for that device. Mine originally had my husbands AppleID in there (he is the Organizer), but I changed it to mine. That doesn't make it so that the purchases are under me. The purchases remained under my husband, but my ID had to be in this spot for it to work.
After that, I closed settings, then I went to Settings>iTunes and App Store> click on the AppleID and Sign Out, even if it has the right AppleID in there. Then Sign In again using the AppleID of the person on that device. Again-- even if it has the right ID in there to start, still sign out and back in.
See if they show up. If they don't show up still, try doing a restart (hold down power button and home button until it restarts).
They should show up by then, but if they don't, at that point, try to go into iCloud and Sign Out and back in.
I think the key is having the right ID in "Family Purchases". I hope this works for you.

Use different DPS accounts for iPad and Android versions of same app?

Hi there,
When creating an Android version of an iPad DPS app should the account used to create the content (the 'Title ID' in the DPS App Builder) be the same for both versions, or different? In the content viewer I know that iPad content will show up even on Android, so I'm thinking that the answer is probably no, but I haven't managed to find it mentioned in the Adobe docs.
Thanks,
Toby

It depends, but usually the answer is that you want to use a different account for iOS and Android. Not all features supported in the iOS viewer are supported in the Android viewer. For example, if you use panoramas or iOS-specific web views in your articles, you'll want to be able to use different content for the Android viewers. Search for "dps supported features" for a comparison chart.
I use different Application accounts for my apps. I use the Share/Copy feature to transfer the folios from the iOS account to the Android (or Windows) account. Then I delete the few articles that don't work well in the viewer and replace them with articles generated from different source files. That works well and doesn't require too much extra effort.
If you want to reduce the amount of letterboxing in Android viewers, you'll definitely want to use different accounts and use, for example, 1280x800 folios instead of 1024x768.

My apple TV will not let me use my gmail account to log in to Youtube. Is it because it is the same email account I use in my Apple ID?

My apple TV will not let me use my gmail account to log in to Youtube. Is it because it is the same email account I use in my Apple ID?

I'm having the same problem.
Error message reads: This account cannot be used with Apple TV. Please sign in with different account.
I'm using my gmail account to access Youtube as i do on my Mac. I have a completely different Apple ID account.

Why we use different clearing account for GR/IR and planned cost clearing a

My client ask for using same account for GR/IR account and all planned cost clearing account.
i try to convince it should be different accounts but he needs a logical answer.
Why we use different clearing account for GR/IR and planned cost clearing accounts?

Dear friend.
u just tell him while doing GR it will debited n while doing IR it should get credited.hence we need to take diff G/L account or same account.
regds
nasir

Can we share music/apps within a family while using different iTunes accounts?

Can we share music/apps within a family while using different iTunes accounts?
Recently purchased iPhone 5 for my wife and I + my daugther has an iPod. I'd like for us all to have separate iTunes accounts so we can each use iCloud without getting each other's notifications, but would like to have one central repository for mucsic and apps. I'm afraid if I set up iTunes accoutn for the tow of them, I'll have to re-purchase the music and apps (way too many!)

It can be done, but you will have to sign in to your account on her itunes to updated the apps. Try these instructions:
http://support.apple.com/kb/HT1848

I am not able to use my facetime account on my I-Pod

i am not able to use my facetime account on my I-Pod

Have you tried:
- Going to Settings>wifi>connected network and change the DSN to Google's 8.8.8.8
- Going to Settings>General>Date&Time and make sure it is set to Automatic
- Reset networks settings: Settings>General>Reset>Reset Network Settings

How to use different (not local) user for NTLM auth in Authenticator?

Hi All,
I use custom authenticator to provide user / passwords to connect to .NET Web Services. I overloaded function getPasswordAuthentication() that returns right user / password combination for the requested URL. It all works perfectly for many kinds of HTTP connections: basic, ntlm, ntlm-v2, through proxy, ssl, etc.
My problem is that during NTLM authentication from Windows computers JVM uses credentials of the currently logged in domain user instead of calling Authenticator to get other user / password provided by the user. In case when local user credentials fail to authenticate, JVM calls my Authenticator but in case authentication is successful it does uses local domain user and never calls my Authenticator. The issue is when this local domain user does not have enough permissions but authenticated correctly there is no way to supply JVM with another user to begin with.
What can I do to force JVM to ignore local domain user and to use Authenticator to collect credentials during NTLM authentication requested by the server in case the software runs on a Windows box with currently logged in domain user?
I am looking for the answer for a long time already but found only questions and suggestions to switch server from NTLM authentication which is not an option for me. From the developer's view it has to be pretty simple change for Sun to do in Java networking API. Is there any way to escalate it to Sun support? Maybe there is some property in some JRE patch level that allows to do this?
Thank you very much!
Mark

Thank you for the reply. I have kind of an opposite problem. I can perfectly connect from Linux computers to Microsoft IIS servers using NTLM or even NTLMv2 authentication. My problem is connecting from Windows client computer joined to the same domain as IIS server with the domain user logged in to this computer. In this case this user account will be used in any HTTP connections I initiate to this IIS server instead of the one that I want to supply in my custom Authenticator.
I have graphical interactive application that connects to IIS Server. When user runs it and connects to IIS server I want to prompt for the user/password regardless whether JRE may correctly authenticate using current user account credentials. The current user may not have enough permissions in IIS application so I want to use different user to login to IIS application.
Thank you anyway,
Mark

How to use Different Main Windows in Multiple pages to print internal table

Hi experts,
I have a problem regarding how to have multiple different main windows in smartforms..the problem is that i want to print an internal table in the third page of the smartform and that table can have dynamic values ..sometime it may have more than 400 values also which can not be printed in one or two pages ...
so to accomplish the same what i did was..
i tried creating a new main window in the third page but it is throwing an error saying two main windows not allowed and i also tried by copying the first page's main window but it is just repeating the same content what was there in second page..
i also tried by creating a secondary window in the third page and in that window i tried giving my internal table and tried by giving the next page to itself but that also is not allowed and it throws an error saying a page without a main window cannot point to itself as a next page....
i also tried using a secondary window and in that window i was trying to display the internal table but it is only showing third page content and fourth page itself was not created....although in my next page field value of the third page , i have given the third page itself as a next page ....but this also is not working ,.....
please suggest how to have different main windows(not copy of first main window) in smartforms in order to display the dynamic contents of an internal table

HI ,
Just check with your smart styles with assigned paragraph allignment .
Try to create character style with your required font ,size and Allignment .
Hope u this will solve your issue .
Let me know if any concerns......
Regards,
Lokesh

How to use different Vlans outside another gateway in sg-300 28?

dear all
how shall i use different vlans outside another gateway in sg-300 28?
Example:
vlan2 192.168.2.0/24 gateway 192.168.2.1 outside router gateway 192.168.2.254
vlan3 192.168.3.0/24 gateway 192.168.3.1 outside router gateway 192.168.3.254
should me doing in sg-300 28?
thanks.

Hi Amin,
Leave the switch in Layer 2 mode
Cable VLAN2 to the to the outside router gateway 192.168.2.254 interface
cable VLAN3 to the to the outside router gateway 192.168.3.254 interface
Excuse the rough diagram
Make the port going to the outside router gateway, untagged in the vlans they will be transporting. (I am assuming that the router gateway is not vlan aware.)
IP hosts will most likely get DHCP from the router gateway. The IP hosts will then automatically send IP traffic to the router gateway.
VLAN 1 in my switch, could then be the only interface within the switch that has a IP address associated with it, for management purposes.
I can see from you post, that English is not your first language, if you want to speak to someone, you can ask a question by going to;
www.cisco.com/go/sbsc
regards Dave

How to use different stylesheets for ChangeAttributeRequest workflow in OAM

Hi,
We have a requirement to invoke different change attribute request workflows (change password ,change email etc..) from external JSPs..
I want to apply different stylesheets for each workflow. In the workflow URL if i enter style=stylesheet-name its not using that stylesheet. Always its using the same base stylesheet (wf_changeattr.xsl). How can i use different stylesheets? Any pointers on this is appreciated.
Thanks inadvance..
Regards,
Srikanth

Hi Colin,
Thanks for your response. Now i am able to invoke different xsls for different workflows.
I did a mistake by entering style=stylesheet-name. I verified the same with xsl=stylesheet-name.
Its working fine now..
Thanks & Regards,
Srikanth

A/R Delivery Note: How to use different COGS account than default

Similar Messages

Maybe you are looking for