A Really Really Baisc Question

Hi,
I've been scrolling through these topics but can't seem to find any that say simply HOW to connect a macbook to an external display.
I have a new MacBook and am hoping to connect it to my TV. I tried in vain to use the AV cable I use to connect my iPod, but only got the sound coming through.
I was hoping that, much like the iPod, there would be some setting in either iTunes, Quicktime or DivX which would allow me to switch to a TV signal but I couldn't find any.
From the posts I've read it seems I need either more hardware or software to make this work. Is that right?
Thanks.

The 3.5mm 'Headphone' output on the left of your Macbook Pro only sends audio. This is why hooking it up to your TV's inputs only provides sound.
To get video output, you need to use the DVI output on the right side of your Macbook Pro.
To hook up to a standard TV RCA (yellow) input, you will need this adapter: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=743 4E310&nplm=M9267G%2FA.
To hook up to a VGA input (such as on other computer monitors or most new LCD tvs), you will need: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=47C 76E4C&nplm=M8754G%2FA
If you have a device (like a projector or HDTV) that has DVI inputs, just get a standard DVI-DVI cable from your local electrics store.
You will be able to source out the Apple adapters from your local Apple reseller. Hope that helps!

Similar Messages

Possibly really stupid question.

What I've read about backing up itunes always refers to making sure that your purchased music doesn't get lost. There's a lot of other "stuff" in there also, things that weren't purchased...my own CD's, audiobooks, videos, etc`.
Here's the really dumb question: If I hook up my external hard drive and copy itunes to it, does everything I have get copied to the external drive...music, videos, whatever?

I know very little about the file structure on a Windows PC (Apple since 1984). On a Mac, which may be similar to Windows, I just select the *iTunes Music* folder, grab and drag it to the desired location on my external HD and let go. This creates an exact copy of the folder on my external drive.
As far as getting there (to your *iTunes Music* folder) I can be of little help.

This maybe a really dumb question...

I know this maybe a really dumb question but I do need to ask:
-Do I need to buy a new vista to install on my new mac?
(I have a start up one that was included with my previous pc laptop..)
-In terms of partitioning, how should I distribute space?
Thank you in advance.

jlee636:
The Boot Camp installation guide is [HERE|http://www.apple.com/support/bootcamp>. It should be able to answer questions related to installation. Of course these discussions have several other information on boot camp/ windows. All you need to do is launch a search on them.
-In terms of partitioning, how should I distribute space?
Too many people make a partition very small and then regret having done so. My recommendation is to have a partition of at least 32GB. It is highly dependent on what your will be installing on Windows XP/Vista.
-Do I need to buy a new vista to install on my new mac?(I have a start up one that was included with my previous pc laptop..)
It is more than likely that the Windows disk that came with your previous PC/Laptop is an OEM disk and will only work properly with that particular PC. This is generally the case with Dell, HP, Sony etc. The installation disk in the cases above are usually branded.
For more information on which Windows version(s) work with Boot Camp then please click [HERE|http://docs.info.apple.com/article.html?path=Mac/10.5/en/11889.html].
Axel F.

A really easy question...I think.

Hi everyone,
I have turned the internet inside-out looking for a simple
tutorial on this and so far I think they have all taken me kind of
a long way around. Basically what I want is text/photos/buttons/
inside the
box that are
"scrollable" without having to scroll left or right. My Flash
document is 800x533px. I've tried doing the whole ScrollPane thing
going through about 5 tutorials with different methods but it says
I have to do New Symbol/Movie Clip and the so-called "stage" that
you construct the movie on doesn't allow you to change dimentions
as far as I know. I can only change the dimensions of the main
Stage and the ScrollPane. I feel like this is a simple task so any
help would be greatly appreciated. I apologize if this is a stupid
question. Thanks everyone.
~Bryan

kodemonki wrote:
> Ok, I think this is a really easy question, but I've
been looking for a while
> online, in these forums, my site's code, and in my WACK
book.
>
> How do you set a request time out for a specific page so
that it can run for
> an hour or so? I'm using 4.5 so I can't use cfsetting,
but I'm pretty sure
> I've seen this before.
>
> Please help, thanks!
>
I have not been able to dig this out, but I have a vague
memory of there
being an URL parameter you could pass to a page to allow it
to run longer.

Microsoft Office Update Log -- Really quick question!

Hey,
I have an log file entitled, "MAU 1.1.2 Update Log" in my root hard drive folder.
Probably a dumb question, but can I delete that log safely, it just looks stupid sitting there not serving really any purpose right? Like it's only 16 KB but still, I just wanna get rid of it.
Should I be alright to delete it? It's just a log file.

Yup!
The number leeds me to believe its from an old update. If you haven't done so you should download and install the 11.3.4 Office 2004 patch.
Get it from here:
Click Here

Really basic question: why?

Why does Java Web Start exist?
If you want a Java application to run in a browser, isn't easier just to write an applet?

This sounds good, but it looks to me like Java Web
Start really doesn't deliver on its promise.It has some issues that are left to be resolved (download of a special JRE seems not to work, some proxy related madness, some stuff involving admin priviledges is not easy..) but in general it is much easier to use than the bl**dy browser plug ins.
I believe it is the easiest method to deploy Java apps over the web.
got to install a JRE and JWS in a completely separate
process, and if something causes the client-side
configuration to change, it fails.It comes down to one install (JWS which includes the JRE or the new 1.4 JDK/JRE, which includes JWS).
I still can't it to install correctly, and can't get the demos to run. What system, what problem?
For my application, running in a browser is ok. I've
seen some articles that suggest that you can get out
of the sandbox with a signed applet, although a brief
look suggests that the procedure for installing a
certificate is a headache.You sign the jars (one command line call) and your users have to click "yes, I accept" one time - this is not too much asked.
So the question remains: why use JWS, given that
installation is more difficult than for an applet?You can do real apps (not bound to the browser windows) and you can deploy different versions (updating is easy).
All in all this is a developing technology, which is already very useful.
Regards,
Marc

Two really embarrassing questions from iPod newbie!

Although I've been using Macs since the steam-powered Mac SE, I've never actually owned an iPod (until now), because I never listen to music 'on the go'.
However, I've just ordered an 80Gb Classic from the Apple Store, principally as a handy way to have all the songs I've written or played on in one handy, small location.
However, because I've never owned one before, I have a couple of questions that probably seem +really stoopid+ (red face)...
1. I guess I will copy all the songs from CD to iTunes on my iMac and then upload them to the iPod. But will I have to keep all those songs in iTunes? If I subseqiently delete them from iTunes, will they be automatically deleted on the iPod the next time I try and copy any songs from iTunes to it?
2. When I copy the music files to iTunefrom CD, can I copy the music files to an external Firewire HD, not my main hard drive? There are a lot of songs to copy and I don't want to fill a significant chunk of my main hard drive if I don't have to. Would iTunes 'see' them on an external HD? Or can I copy them straight from the CDs to the iPod via iTunes, without physically copying them to an HD at all?
Sorry for the basic questions, I hope someone can help.

Robin,
You might want to consider a few things before you wipe your iTunes library clean (assuming you have already trasnfered them onto your iPod).
If, for some reason, you need to restore your iPod and put music back on, iTunes will have to transfer that music back to your iPod. If you have wiped your iTunes library clean that could mean spending a lot of time REformatting your music collection to put back on your iPod.
Also, I have had a few instances where, although I have iTunes set to 'manually' manage my transfers, iTunes has deleted all of my music. Thank God I had my library on my hard drive as it only meant a 20 minute sync to transfer 6,000 songs back on.
If hard drive space on your desktop or laptop is limited, iTunes offers a way to 'backup' the library on DVD+R or similar media. So, for about $10 in blank DVD costs, you can just make a portable backup to put in a drawer.
Just PLEASE think about these issues before you put music on your iPod and delete it from your hard drive. From experience, things happen and you don't want to go through the 'ripping' hassle again! (ripping, the term for making mp3/wma/aac files from a CD)
Last, if this is your first attempt at putting your music collection on your computer, you might want to keep them there. You might be surprised at how handy it is to have all of your music in one place close by, especially if you invest in a pretty moderately priced speaker setup for your computer.
Best of luck!

2 (promise) really backward questions

Please forgive this - I truly did search the web, but couldn't find a clear answer.
I have GoLive CS2 and wondered if it can still be used to design a website, not merely for upkeep/updating an existing site.
The second question is if I can then transfer the created website via CD from an offline G4 tower to an online iBook G4.
Thank you so much for any reply. I do know these idiot questions are annoying, and promise not to impose again. I'm a portrait painter and really need to create a site. I'll be reading and learning here only after this, not interrupting.
Sanford

Thanks ever so much! I've tried repeatedly to sign back in, to thank you 'publicly' in the thread (have checked both my ID and password, but to no avail). I'll keep trying.
Super forum, and thanks to you, I'll be able to forge forth!!

A really stupid question from newbie...

hello all,
i am very new to java and i am trying to build a j2ee application...
rite now....i need to let my app communicate w/ an outside program thru' XML..
i had just learnt many thing about java w/ xml and i decided to use the XMLEncoder... it seems quite simple to use...BUT i have no idea on how to send/receive these XML files...i had thought of using socket connection, but i just found out that an EJB wouldn't allow socket networking... i bet this must be quite a stupid question coz i found nowhere teaching me this...=P
if u know about this, pls point me to some relevant docs / sites....i am anxious to learn about it...
thx so much,
karloogunna~

hello maesj, rune, and others,
thx alot for your advice...
and here's the environment i am working in:
OS: w2k
JDK: 1.4.1.01
j2ee: 1.3.1
jboss: 3.0.2
i am using flash as my UI, so i need communication
between the j2ee app and flash.
the data transfer involves a number of arrays of
objects (each object w/ a list of attributes...) so, i
think using XML as data-exchange is quite suitable (am
i wrong on this??)I don't know the first thing about Flash, but using XML as a means for exchanging data seams like a good idea, for the scenario you described.
>
and i am reading about the message-driven beans, i see
that they got a function onMessage() from where i can
get the XML strings (?), but i don't know how i can
feed these strings into this JMS from flash...do i
need to write a small java program on the client
side?I haven't that much experience with Message Driven Beans. What I do know is that they employ the Java Messaging Service (JMS). If you write a small client appplication with JMS support... you might be close.
>
also, i am not sure if i can send out XML strings
through the message-driven beans, i am reading on the
JMS...it got the MessageProducer, MessageConsumer,
MessageListener, and MessageSelector....should i be
using this? or can i use this together with the
message-driven beans??
In a Messaging system you will need message producers, and message consumers. To enable two-way communication, you can setup both the EJB and the client to handle both. When a message arrives at the consumer (or subscriber if you like), the JMS Service invokes the onMessage method. So you should implement your logic in the onMessage method, for example inspect the XML content, and act upon its content.
i am very sorry for my disorganized questions...(i
used to do low-level programming =P)
and really thank you for your advice!!!!
No problem, the amount of information to read can be quite overwhelming. Using JMS is just a suggestion, and might be considered overkill for your application. If you're using an IDE, like Sun ONE, creating a message driven bean is easy, and can be tried out, without too much hours passing.
Kind Regards,
Rune Bj�rnstad.

Really simple question, stop function and scroll bar won't work

I was working on different parts of this VI separately, when I put them together the scroll bar and stop button stopped working.
In the individual VI both are in the while loop. In the final one I was one scroll bar and one stop button to apply to all 5 while loops.
I tried taking the scroll bar in and out of the first loop to attach it to the rest but it still won't work.
I'm sure that there is a really stupid simple answer but I've been playing with it for a while.
I attached the VI that I am working on as well at fake data (to test the color boxes).
Thanks!
Solved!
Go to Solution.
Attachments:
trial8.vi ‏95 KB
trial8.vi ‏95 KB
0_1024.txt ‏25 KB

You have a typical beginner problem due to incorrect understanding of dataflow. Run the code using execution highlighting and watch the diagram to see.
Your stop button is outside any loop and thus will only be read by the code exactly once at the start of the program.
Your scroll bar is read in the first loop. All other loops cannot start until the first loop has completed and since (1) is true, it will never happen if the boolean is false when the code starts.
Why do you have so much duplicate code? 95% of the loop code is the same and can be re-used. I am sure the entire thing could be written using 5% of the total code. Put everything in one loop, the iterate over the 2D array to get all the values. Don't forget to place a small wait inside the while loop.
LabVIEW Champion . Do more with less code and in less time .

A really dumb question

I am trying to add a second page to a really simple website. I can't figure out how to link to the second page. If my first page is (for example) http://mysite.com and I make another page (I'm doing this in Dreamweaver) and I call it myinfo and I place it in the mysite.com file where the index.html file is what do I call the link? I tried highlighting the "see next page" and use the properties box and in the "link" box I browsed till I found the "myinfo" file but when I loaded to the web I get the error 404 File not Found. Any help on this Fri. the 13th?
Thanks.

This is my website http://ourlccm.com/ now I am trying to make pages to link to it. The second page I made in Dreamweaver but I don't know what address to use. Thanks.

Really embarassing questions from a new Mac user

Okay, I have my new Mac Mini up and running and thought I'd test drive it by creating some simple holiday cards, recipe cards, gift tags, etc.
What application do I use for this? I found text edit, but that doesn't seem to have any graphics or clip art so to speak and I don't want to use photos.
Am I stupid? Or is there really no program for this sort of simple thing?
If I need to purchase additional software, what should I get?
Thanks.

I'm not sure which stationaries you're talking about, although it's been a while since I used Microsoft Windows in a production environment. I know that Microsoft Works includes quite a few of them, but while it is bundled with many PCs, it's not part of Windows.
I think iWork features templates for CVs and so forth, and it's supposedly very good for creating stylish documents. FWIW, iWork is usually released at MacWorld San Francisco in January, so you may want to hold off to see if iWork '07 is released (after all, it's just a month away).
Also, while Pages can import and edit MS .doc files, it's not as good as some other applications. NeoOffice, which is based on OpenOffice.org, is free, Intel-native, and has good compatibility with MS Office documents.

OK - I got a really interesting question down in ABAP General and NW AppSer

This one is so interesting that I thought I'd draw a little extra attention to it here.
See:
Hang on to your hats! (shared buffer in multi-WAS/multi-update process env)
or:
Hang on to your hats! (shared buffer in multi-WAS/multi-update process env)
Any and all informed opinion welcome.

This is really cool: the export to database statement with a given key value for ID replaces what's already in the table for the same key value.
To see that this is true, copy the system table INDX to a custom table called ZINDX_QM (so you won't have to change the code below.) Activate this custom table.
Then run the following code twice as follows:
1) the first time, leave the value of wa_stuff as it is declared, i.e.:
"This is some stuff"
2) the second time, change the value of wa_stuff to:
"This is some stuff - pass 2."
You'll see that the second value has replaced the first value in the custom table.
So the export to database statement actually does a "replace", not an "append", if the key value is already in the table.
REPORT ZFOO.
type-pools: thfb.
TABLES:
zindx_qm.
DATA:
context_id TYPE thfb_context_id,
cntxt_user_dt(60) TYPE c,
cntxtud_s TYPE string,
rtrnd_hash TYPE i,
rtrnd_hash_n(22) TYPE n,
rtrnd_hash_c(22) TYPE c,
wa_zindx_qm TYPE zindx_qm,
v_chk_cnt TYPE i,
wa_stuff(40) TYPE c VALUE 'This is some stuff - pass 1'.
CALL FUNCTION 'TH_GET_CONTEXT_ID'
IMPORTING
 CONTEXT_ID = context_id.
CONCATENATE context_id
 sy-datum
 sy-uname
 INTO cntxt_user_dt.
cntxtud_s = cntxt_user_dt.
CALL FUNCTION 'LCRDB_STRING_HASH'
EXPORTING
 TEXT = cntxtud_s
IMPORTING
 HASH = rtrnd_hash.
rtrnd_hash_n = rtrnd_hash.
rtrnd_hash_c = rtrnd_hash_n.
wa_zindx_qm-aedat = sy-datum.
wa_zindx_qm-usera = sy-uname.
wa_zindx_qm-pgmid = sy-repid.
EXPORT wa_stuff
TO DATABASE zindx_qm(mo)
ID rtrnd_hash_c
FROM wa_zindx_qm.
CLEAR wa_stuff.
IMPORT wa_stuff TO wa_stuff
FROM DATABASE zindx_qm(mo)
ID rtrnd_hash_c.
WRITE: / wa_stuff.
Also, the second cool thing is that the "relid" (area) field of the custom table actually makes coding multiple storage statements much easier. To see why this is so, just compare what's been commented out in the following BAdI method with what's replaced it:
method IF_EX_INSPECTIONLOT_UPDATE~CREATE_IN_UPDATE.
* 11/10: new export statements from XSQM exit
*EXPORT gt_outtab TO DATABASE zindx_qm(tb) ID rtrnd_hash_c.
*EXPORT s7_tab_mseg TO DATABASE zindx_qm(ms) ID rtrnd_hash_c.
*EXPORT v_cntr_recursion TO DATABASE zindx_qm(rc) ID rtrnd_hash_c.
* 11/10 - original decs/imports before switch to database exports from shared buffer exports
*v_memkey(60) TYPE c,
*v_memkey2(64) TYPE c,
*v_memkey3(65) TYPE c,
*v_memkey4(65) TYPE c,
*v_memkey5(65) TYPE c,
*v_memkey6(65) TYPE c,
*IMPORT gt_outtab TO gt_outtab FROM SHARED BUFFER indx(st) ID v_memkey. now tb
*IMPORT s7_tab_mseg TO s7_tab_mseg FROM SHARED BUFFER indx(st) ID v_memkey2. now ms
*IMPORT v_cntr_recursion TO v_cntr_recursion FROM SHARED BUFFER indx(st) ID v_memkey3. now rc
*IMPORT v_do_exit TO v_do_exit FROM SHARED BUFFER indx(st) ID v_memkey4. now de
*IMPORT wa_zzqa02 TO wa_zzqa02 FROM SHARED BUFFER indx(st) ID v_memkey5. now wz
*IMPORT i_zzqa02 TO i_zzqa02 FROM SHARED BUFFER indx(st) ID v_memkey6. now iz
* for context id typing
TYPE-POOLS:
thfb.
DATA:
context_id TYPE thfb_context_id,
cntxt_user_dt(60) TYPE c,
cntxtud_s TYPE string,
rtrnd_hash TYPE i,
rtrnd_hash_n(22) TYPE n,
rtrnd_hash_c(22) TYPE c,
wa_zindx_qm TYPE zindx_qm,
v_chk_cnt TYPE i.
DATA:
v_do_exit TYPE c,
v_cntr_recursion TYPE i,
v_itab_cnt TYPE i,
v_index TYPE i,
v_mapl_cnt TYPe i.
DATA:
s_qals TYPE qals,
s7_tab_mseg TYPE STANDARD TABLE OF mseg,
wa_mseg TYPE mseg,
gt_outtab TYPE STANDARD TABLE OF zzmseg_qm_2007,
wa_zzqm TYPE zzmseg_qm_2007,
wa_zzqa02 TYPE zzqa02_prueflos,
i_zzqa02 TYPE STANDARD TABLE of zzqa02_prueflos,
wa_zqm_lottrck TYPE zqm_lottrck,
wa_mapl TYPE mapl,
v_mtart TYPE mtart,
v_qmatv TYPE qmatv.
DATA:
v_cnt_wyt3 TYPE i,
v_debug TYPE i.
CALL FUNCTION 'TH_GET_CONTEXT_ID'
 IMPORTING
 CONTEXT_ID = context_id.
CONCATENATE context_id
 sy-datum
 sy-uname
 INTO cntxt_user_dt.
cntxtud_s = cntxt_user_dt.
CALL FUNCTION 'LCRDB_STRING_HASH'
 EXPORTING
 TEXT = cntxtud_s
 IMPORTING
 HASH = rtrnd_hash.
rtrnd_hash_n = rtrnd_hash.
rtrnd_hash_c = rtrnd_hash_n.
* CONCATENATE 'DEXIT'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey4.
* IMPORT v_do_exit TO v_do_exit FROM SHARED BUFFER indx(st) ID v_memkey4.
IMPORT v_do_exit TO v_do_exit
 FROM DATABASE zindx_qm(de)
 ID rtrnd_hash_c.
* CONCATENATE 'CRCSN'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey3.
* IMPORT v_cntr_recursion TO v_cntr_recursion FROM SHARED BUFFER indx(st) ID v_memkey3.
IMPORT v_cntr_recursion TO v_cntr_recursion
 FROM DATABASE zindx_qm(rc)
 ID rtrnd_hash_c.
* CONCATENATE sy-uname
* sy-datum
* context_id
* INTO v_memkey.
* IMPORT gt_outtab TO gt_outtab FROM SHARED BUFFER indx(st) ID v_memkey.
IMPORT gt_outtab TO gt_outtab
 FROM DATABASE zindx_qm(tb)
 ID rtrnd_hash_c.
DESCRIBE TABLE gt_outtab LINES v_itab_cnt.
IF v_do_exit = 'N'.
 v_do_exit = 'Y'.
* EXPORT v_do_exit FROM v_do_exit TO SHARED BUFFER indx(st) ID v_memkey4.
 EXPORT v_do_exit FROM v_do_exit TO DATABASE zindx_qm(de) ID rtrnd_hash_c.
* CONCATENATE 'SQALS'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey5.
* IMPORT wa_zzqa02 TO wa_zzqa02 FROM SHARED BUFFER indx(st) ID v_memkey5.
 IMPORT wa_zzqa02 TO wa_zzqa02
 FROM DATABASE zindx_qm(wz)
 ID rtrnd_hash_c.
 IF v_cntr_recursion < v_itab_cnt.
* CONCATENATE 'TQALS'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey6.
* IMPORT i_zzqa02 TO i_zzqa02 FROM SHARED BUFFER indx(st) ID v_memkey6.
 IMPORT i_zzqa02 TO i_zzqa02
 FROM DATABASE zindx_qm(iz)
 ID rtrnd_hash_c.
 ENDIF.
 APPEND wa_zzqa02 TO i_zzqa02.
* EXPORT i_zzqa02 FROM i_zzqa02 TO SHARED BUFFER indx(st) ID v_memkey6.
 EXPORT i_zzqa02 FROM i_zzqa02 TO DATABASE zindx_qm(iz) ID rtrnd_hash_c.
 IF v_cntr_recursion = 0.
 CALL FUNCTION 'ZZQA02_ASSIGN_BDC' IN BACKGROUND TASK.
 ENDIF.
 EXIT.
ENDIF.
* CONCATENATE 'MSEG'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey2.
* IMPORT s7_tab_mseg TO s7_tab_mseg FROM SHARED BUFFER indx(st) ID v_memkey2.
IMPORT s7_tab_mseg TO s7_tab_mseg
 FROM DATABASE zindx_qm(ms)
 ID rtrnd_hash_c.
v_index = v_itab_cnt - v_cntr_recursion + 1.
READ TABLE gt_outtab INTO wa_zzqm INDEX v_index.
READ TABLE s7_tab_mseg INTO wa_mseg INDEX v_index.
IF wa_mseg-bwart <> '101'
 AND wa_mseg-bwart <> '103'.
 EXIT.
ENDIF.
IF wa_mseg-werks <> '2000'.
 EXIT.
ENDIF.
SELECT
SINGLE mtart
 FROM mara
 INTO v_mtart
 WHERE matnr = wa_mseg-matnr.
SELECT
SINGLE qmatv
 FROM marc
 INTO v_qmatv
WHERE matnr = wa_mseg-matnr
 AND werks = wa_mseg-werks.
IF v_mtart <> 'ROH'
 AND v_qmatv <> 'X'.
 EXIT.
ENDIF.
s_qals = insplot.
* v_lifnr_save = s_qals-lifnr.
CALL FUNCTION 'QPBU_LOT_DELETE'
 EXPORTING
 I_QALS = s_qals.
 s_qals-lifnr = wa_zzqm-zzlifnr.
 s_qals-pplverw = '5'.
 s_qals-stat19 = 'X'.
SELECT
SINGLE plnty
 plnnr
 plnal
 zkriz
 zaehl
 FROM mapl
 INTO (s_qals-plnty,
 s_qals-plnnr,
 s_qals-plnal,
 s_qals-zkriz,
 s_qals-zaehl)
 WHERE matnr = wa_mseg-matnr
 AND werks = wa_mseg-werks
 AND lifnr = wa_zzqm-zzlifnr.
v_do_exit = 'N'.
* EXPORT v_do_exit FROM v_do_exit TO SHARED BUFFER indx(st) ID v_memkey4.
EXPORT v_do_exit FROM v_do_exit TO DATABASE zindx_qm(de) ID rtrnd_hash_c.
v_cntr_recursion = v_cntr_recursion - 1.
* EXPORT v_cntr_recursion FROM v_cntr_recursion TO SHARED BUFFER indx(st) ID v_memkey3.
EXPORT v_cntr_recursion FROM v_cntr_recursion TO DATABASE zindx_qm(rc) ID rtrnd_hash_c.
wa_zzqa02-prueflos = s_qals-prueflos.
* CONCATENATE 'SQALS'
* sy-uname
* sy-datum
* context_id
* INTO v_memkey5.
* EXPORT wa_zzqa02 FROM wa_zzqa02 TO SHARED BUFFER indx(st) ID v_memkey5.
EXPORT wa_zzqa02 FROM wa_zzqa02 TO DATABASE zindx_qm(wz) ID rtrnd_hash_c.
SELECT COUNT( * )
 FROM mapl
 INTO v_mapl_cnt
 WHERE matnr = wa_mseg-matnr
 AND werks = wa_mseg-werks
 AND plnty = 'Q'
 AND plnnr <> '99999999'.
IF v_mapl_cnt = 1.
 wa_mapl-matnr = wa_mseg-matnr.
 wa_mapl-werks = wa_mseg-werks.
 wa_mapl-plnty = 'Q'.
 wa_mapl-plnnr = '99999999'.
 wa_mapl-plnal = '01'.
 wa_mapl-zkriz = '0000001'.
 wa_mapl-zaehl = '00000001'.
 wa_mapl-lifnr = 'ZZZZZZZZZZ'.
 wa_mapl-datuv = sy-datum.
 INSERT INTO mapl VALUES wa_mapl.
ENDIF.
CALL FUNCTION 'QPBU_LOT_INSERT'
 EXPORTING
 QALS_NEW = s_qals.
IF wa_zzqm-zzltno IS INITIAL.
 EXIT.
ENDIF.
wa_zqm_lottrck-zzltno = wa_zzqm-zzltno.
wa_zqm_lottrck-werk = wa_mseg-werks.
wa_zqm_lottrck-prueflos = s_qals-prueflos.
wa_zqm_lottrck-mblnr = s_qals-mblnr.
wa_zqm_lottrck-mjahr = s_qals-mjahr.
wa_zqm_lottrck-zeile = s_qals-zeile.
INSERT
 INTO zqm_lottrck
VALUES wa_zqm_lottrck.
ENDMETHOD.

Thsi is not really a question. It is a statement on prn to pdf.

Adobe should inform everyone who has an older machine. to NOT upgrade to reader X because it saves ALL pdf formats as a prn.
Even if you choose 'save as' as PDF in the menu.
All you have to do is uninstall Reader X and reinstall 8.5.
SUPER FRUSTRATING, Acrobat nerds, and not cool!!!!!
Not everyone in this economy can afford a new computer.
I have XP SP3.
SO FYI to everyone in MY boat.
If READER asks if you want to update....DONT!!!!

I totally understand where Kym is coming from. I never had this happen until recently, now Adobe saves everything as a .prn file. Same as Kym I do not have the option to not saave as .prn, and I Do have my printer showing.
I believe Adobe is missing the point here, sometimes I do not want to save a copy, I just need to print an invoice for my records.
Why should I have to go into advanced mode every single (darn) time to do something I was able to do without the extra steps. You (Adobs) are not making it easier, you are making it harder. Please change this back.
I run windows 7 on a Dell Opitplex 390. I have also noticed on my MacBook Pro (running OSX 10.6) at home, that I have to actually hit ctrl and click on a pdf now to download it, or the page online does not display - equally annoying. I could also mention that I don't understand why you never made the tools for Illustrator and Photoshop the same, but now I'm really ranting...)
Bottom line - change it back!
Kent

This Is Not Really A Question

Well Apple this is just a suggestion. Wouldnt it be cool if our pictures could be a slide show like when you are on your pictures and you press and hold the arrow button and it starts making the pictures pass by really fast. Can u make them into a wallpaper slideshow like a constantly moving wallpaper. i think it would be really cool if u put it in the next update. i took lots of pictures of myself and i held the right arrow and i saw my pictures going by really fast and it looked like i was talking with no sound and it looked kind of like a really short video. this is a suggestion so you can put it in your next update for the Ipod Touch ios 4.3.6 if you wanted to. can u at least think about putting it in the the next update please and thank you

Apple does not monitor these forums for suggestions. To make a suggestion go here:
Apple - iPod touch - Feedback

A Really Really Baisc Question

Similar Messages

Maybe you are looking for