A really strange issue in Stratus

Hi,
I'm facing a very strange issue in Stratus. Let me explain:
I have two mac machines (i.e. One is Mac and other is MacPro). Both are in the same network. When Mac connects with MacPro, audio, video, text conversation goes really well but when MacPro connects with Mac, I see audio, video but MacPro can't send text messages to Mac but Mac can send text messages to MaPro. It's really strange I know but I'm stuck in that issue. Please help me out.
Thanks

> Hi Roberto,
> I tried by removing D:.
> Nothing is happening.No Luck.
> I have created two more directories in tempforXI as
> sender and receiver and made necessary modifications
> in comm channels like \tempforXI\sender...and placed
> the file.
>
> regards
> Raju
Remember that the format you should use is:
<share name>\<folder>
and not
\tempforXI\sender
Where share name is in your case tempforXI.

Similar Messages

  • Strange issue in SharePoint Search

    I just took over SharePoint farm from other admin who left. After that SharePoint search crawl broke. I recreated the SharePoint search with all the settings. But there is really strange issue happening now.
    If domain A user log in to SharePoint and search, they see all the results, while users from domain B donot see any result. Why is this happening? Has anyone experienced this before?
    Any help will be hugly appreciated.
    Adit

    Hi Adit,
    Is SharePoint installed in domain A and domain B is a one-way trusted domain?
    If yes, then the issue should occur because search results gets security trimmed while returning the results back to the domain B users.
    I recommend to run the following Windows PowerShell command: 
    $searchapp = Get-SPEnterpriseSearchServiceApplication
    $searchapp.SetProperty("ForceClaimACLs",1)
    A full crawl is required to enable the new ACL format across the content.
    More information is provided in the link below:
    https://support.microsoft.com/kb/2344518?wa=wsignin1.0
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Really strange network issue that is specific to OS X 10.6.8

    Really strange network issue that is specific to OS X 10.6.8 on both 2 iMacs and an older intel Mac Pro.
    Any system running 10.6.8 is achieving on average 15 –20 mb a sec transfer rates regardless of drive speeds, cables, network activity etc.. I've spent some time removing any cable , drive speed, router issues to the point where one machine dual boots into both 10.6.8 and 10.6.5
    The 10.6.5 system has network speeds of 60mb – 80mb p/sec transfer rates.
    Our older 10.5.8 PPC mac gets 80mb and my 2011 Macbook Pro 10.7.2 hits 60mb – 80mb consistently as well.
    Any idea what the cause is?
    Cheers

    Since your other Mac running 10.5.8 is not affected, you know that your AirPort router is functioning correctly.
    What changed on your Mac? This seems like a post for either the Mac OS X v10.6 Snow Leopard support area, or the support area for your model of Mac.
    We normally handle questions about the AirPort Express, AirPort Extreme or Time Capsule in this area, but you can certainly wait to see if you receive a response here.

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • Strange issue when pausing LONG audiobook--pressing play again changes the

    Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
    The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
    I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
    The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
    I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
    I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
    Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?

    I'm glad that I'm not the only one having this
    problem. It's ironic that we're both having issues
    with the SAME audiobook. I haven't had a chance to
    listen to Books 1-5 much to see if they have the same
    issue or not--I don't remember any on the few parts
    that I've played for my nephews.
    Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
    I'm thinking that I may try to convert to AAC before
    I try the splitting program--in theory, it's easier
    to start right back in again when you only have 1
    track to find, than when you have dozens/hundreds of
    smaller tracks. It's sometimes hard to remember
    which track you left off with--even if it's
    "bookmarked" within that track.
    I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
    My only concern is how much quality I'm losing by
    converting from one compressed format--MP3--to
    another compressed format AAC.
    Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
    I suppose, since it's
    spoken word instead of music, the change shouldn't be
    too noticable. I'm not sure what kind of time frame
    it'll require to convert. I'll probably try it with
    book 1 first--since it's the smallest.
    May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
    As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
    Keep me updated on your end. I sure which that there
    was an explanation for why it happens.
    Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
    Talk to you later!
    HP dv5117d, iTunes 7.0.2.16   Windows XP Pro   1st gen 4GB nano, sw ver 1.3

  • ORA-39165: During Expdp Strange Issue

    Hi All,
    DB -- 11.1.0.6.0
    OS --HPUX Itanium.
    Today , I came across with one strange issue , where EXPDP tells us the scehma does not exist. we then tried to look into this this particular schema into the database and discovered it's does exist there. One wearied thing is that , all the tables inside this schema are of same size and have bit strange naming convention.I also discovered the same issue with one more database on the same host.
    CPMDVFDM> Total estimation using BLOCKS method: 0 KB
    ORA-39165: Schema WMSYS was not found.
    ORA-31655: no data or metadata objects selected for job
    Job "SYS"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 11:02:43
    [1] +  Done(5)                    expdp  \'/ as sysdba\' directory=data_pump_dir1 logfile=wmsys.log schemas=wmsys &
    SQL> select table_name from dba_tables where owner='WMSYS';
    TABLE_NAME
    WM$RIC_TABLE
    WM$RIC_TRIGGERS_TABLE
    WM$INSTEADOF_TRIGS_TABLE
    WM$WORKSPACES_TABLE
    WM$VERSION_TABLE
    WM$NEXTVER_TABLE
    WM$VERSION_HIERARCHY_TABLE
    WM$VERSIONED_TABLES
    MAX(BYTES) SEGMENT_NAME
         65536 WM$RIC_TRIGGERS_TABLE
         65536 WM$WORKSPACES_TABLE
         65536 WM$MODIFIED_TABLES
         65536 WM$NEXTVER_TABLE
         65536 WM$CONS_COLUMNS
         65536 WM$MP_PARENT_WORKSPACES_TABLE
         65536 WM$LOG_TABLE
         65536 WM$ADT_FUNC_TABLE
         65536 WM$UDTRIG_INFO
         65536 WM$VT_ERRORS_TABLE
         65536 WM$NESTED_COLUMNS_TABLE
    MAX(BYTES) SEGMENT_NAME
         65536 WM$VERSIONED_TABLES
         65536 WM$RESOLVE_WORKSPACES_TABLE
         65536 WM$LOCKROWS_INFO
         65536 WM$MP_GRAPH_WORKSPACES_TABLE
         65536 WM$BATCH_COMPRESSIBLE_TABLES
         65536 WM$TMP_DBA_CONSTRAINTS
         65536 WM$RIC_LOCKING_TABLE
         65536 AQ$_WM$EVENT_QUEUE_TABLE_S
         65536 WM$INSTEADOF_TRIGS_TABLE
         65536 WM$VERSION_TABLE
         65536 WM$VERSION_HIERARCHY_TABLE
    MAX(BYTES) SEGMENT_NAME
         65536 WM$WORKSPACE_PRIV_TABLE
         65536 WM$WORKSPACE_SAVEPOINTS_TABLE
         65536 WM$UDTRIG_DISPATCH_PROCS
         65536 WM$REPLICATION_TABLE
         65536 WM$CONSTRAINTS_TABLE
         65536 WM$EVENTS_INFO
         65536 WM$LOG_TABLE_ERRORS
         65536 WM$REMOVED_WORKSPACES_TABLE
         65536 WM$HINT_TABLE
         65536 WM$RIC_TABLE
         65536 WM$ENV_VARS
    MAX(BYTES) SEGMENT_NAME
         65536 WM$SYSPARAM_ALL_VALUES
         65536 WM$EVENT_QUEUE_TABLE
         65536 SYS_IOT_OVER_12359
         65536 WM$REPLICATION_DETAILS_TABLERegards

    This is not true, there is a set of schemas that Data Pump knows are really not user schemas and therefore are not exported. Most contain sys, but they don't have to.
    If you created a schema called sysxyz, it would be exported.
    Dean

  • Strange Issue with Planning 11.1.2

    Hi All,
    Recently i've installed Hyperion 11.1.2 and i've noticed a strange issue. I've logged in to workspace as administrator, everything is fine. Now i logged off and then login as a user with role as Planner. He should not see Planning Administrator menu right ? But Planner can also able to see the admin menu. Now i've logged off and cleared all the Cookies, history in the Browser, and login as a user now, it has given the correct message as "Application is in maintenance mode, new logins are not allowed" and unable to see Admin menu now. Why it is happening. Is it really a bug or issue with the browser. Even if there is a issue with Browser, it should not work in this way right ? Pls. advice

    I have seen issues with other products in the 11.1.2 line retaining permissions with user login/logout on the same browser.
    As John says log a case show them how to replicate and continue forward. Likely 11.1.1.2.1 fixes this and it's know however get the case logged to get it in the pipeline in case you've discovered a new defect.
    And going forward you will need to ensure if you are logging in as a high access user on a user desktop to exit all browsers and ensure they are not running in task manager before leaving that pc.
    Regards,
    John A. Booth
    http://www.metavero.com

  • Really big issue after last upgrade

    After invoking
    pacman -Syu
    this morning something really strange happened : it upgraded my kernel headers and docs to kernel 2.6.35.7, but did nothing to the kernel itself. After the install of all packages, I went to the '/boot' directory and it was empty except for the 'grub' sub-directory. Since the kernel was still loaded in memory, it was only a matter of doing
    pacman -S kernel26
    and it installed the kernel and initramfs image.  All this happened while I rebooted in console mode to uninstall gtk/gnome completely and install kde.
      After that I went to check my system configuration file 'rc.conf' and guess what, it was missing too and after that I noticed that 'inittab' had also been deleted. Luckly I edited both files with vim which made backups in 'rc.conf~' and 'inittab~' respectively, so it was easy to restore both. After having a quick look at etc I decided to reboot the system(default runlevel was changed back to 5 so I could boot kde directly) but something was strange after reboot(I expected that) : nouveau framebuffer driver did not load and I never entered KDM, getting a terminal login instead. Also noticed that the PS1 variable was not set. After trying to edit my configuration files I kept getting that this was a read only file system and could do nothing until I booted with an old ubuntu livecd. After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
    - /etc/rc.sysinit
    - /etc/rc.single
    - /etc/rc.multi
    - /etc/rc.shutdown
      Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system.
      Thanks in advance.

    jonathan183 wrote:
    thiago wrote:
    After checking on 'inittab' again I noticed the following files were missing(sadly, I never edited them):
    - /etc/rc.sysinit
    - /etc/rc.single
    - /etc/rc.multi
    - /etc/rc.shutdown
      Has anyone experienced this 'accident' before? If so, do you have any clue how I might recover those files? I would rather not reinstall the system
    pacman -Qo /etc/rc.sysinit reports owned by package initscripts ... which you could re-install ... might be worth reviewing logs and see if you can figure out whats going on first though ...
      Thanks, after manually installing the 'initscripts' package in '/var/cache/pacman/pkg', my system was restored. As for what happened, I believe it was some bug with pacman, as the 'initscripts' package was uninstalled after the system upgrade. That package was part of the 'base' meta package which was upgraded as a whole. After the restore I issued :
    pacman -Sf initscripts
    to have the package 'officially installed'.
      As I stated, 'initscripts' was not the only package uninstalled after the system upgrade, kernel26 was lost too(but kernel26-docs and kernel26-headers were upgraded successfully). After the restore I tried to start kde with 'startx' and got a message stating that '/usr/bin/X' could not be found/executed. That was solved by reinstalling the 'xorg' meta package, but I believe some package of the 'xorg' group was also uninstalled after the upgrade.

  • Ethernet Port is acting really strange?

    So I am having the hardest time coming up with a solution to a really strange problem I'm having.
    Day One: My ethernet port just stopped noticing when it was connected to a internet connection. I did a restart, PRAM reset, anything that I could think of. Nothing worked. I made an appointment to the Genius Bar and the same problem was happening there.
    So they booted up a new image of OSX on a thumb drive and ethernet port was working! So the Genius bar guy removed all my preferences/network .plist files from MY OSX and everything was back to normal.
    So we know this isn't a hardware issue.
    Next day: No more ethernet, Again...
    I did the same proceedure that the Genius bar did. No result. WHAT THE DUCE? I still didn't have an ethernet port.
    I then reinstalled OSX, to get a clean state. Ethernet is back and working normally. All good.
    Next day: Ethernet port "works" but is selective on which one it wants to use.
    I work in two different offices.
    At the first office. The port next to my desk doesn't work when I connect. Another person can plug in (with same cord or different chord and get internet access) no issues. I can go two feet over and plug in there and the ethernet port recognizes it is plugged in and I revieve internet.
    At the second office, the cubicle I reside in has 4 ethernet ports. All four work for other people. Only 2 work for me.
    WHAT THE DUCE is going on? Can anyone help me with this?

    Along the same vein, after resetting the PRAM and SMC, try turning all security off: no firewall, enable all apps and turn FileVault off if in use. Not advocating a "go stroll naked in the rough side of town", but rather to try and confirn that those components have no bearing on the issue. Do enable all you use immediately after.

  • Some strange issues-Need solutions

    Have anyone faced such issues in 11g.
    1) I've created an user test and gave permission to BI author and consumer.Now Im able to see Home, catalog,Dashboard and everything in Presentation service.
    I went to console and deleted the user test and again recreated with the same groups added to it.
    Now when I log in im able to see Home, catalog,Dashboard and everything in Presentation service.But after some time catalog folder is gone.This is really strange.
    2) The first time Im able to set My Dashboard as the default in My account.But second time (after deletion and recreation of same login) Im not able to set My Dashboard.It gives error
    Exception occured when saving user preferences to the catalog .Access denied for the user to path /users/username/_prefs/usersprefsxmlstore
    3) After sometime for some reason I restarted the services and again logged in using test used.It throwed error saying authentication failed.
    Please help how to solve these.Am I doing any mistake? What is the proper way of assigning permissions?

    Sneha wrote:
    2) The first time Im able to set My Dashboard as the default in My account.But second time (after deletion and recreation of same login) Im not able to set My Dashboard.It gives error
    I haven't use 11g yet. But my wild guess is your user doesn't have prvilege to access that report. Go to Administration>manage interactive dashboards and see whether your user has access to the dashboard which you are talking about.

  • Headphones OK, back connectors crack - strange issue

    4Headphones OK, back connectors crack - strange issue)Hi,
    I encountered very strange issue with my X-Fi Elite Pro. I thought that it was driver failure, but I played with couple of them, including PAX and it's still the same issue. Recently I discovered something that shreds some light on it. Here's the thing:
    I got Windows 7 64-bit and 4 GB of RAM. When I use speakers connected via analog cables using card connectors, there are some cracks and pops when I start a game, almost all games suffer from it. It's only in the beginning when some text appear on the screen. If you play Starcraft II, you can imagine what I'm talking about, when log on screen appears.
    However, if I connect my headphones to the external I/O console, all is fine! The console is connected via digital cable, as I suppose, to the card. No cracks, no pops, all is fine! I tried to connect the headphones to the card directly and the same thing happens: cracks and pops again.
    Has anyone experienced something like that? What do I need to do to make my card working properly?

    Hi,
    I replaced my motherboard last week. It was on Intel chipset 965P, now it's still Intel but P55.
    I must say that now I own the Creative product that I am used to. Very strong bass, clean hi tones, very dynamic sound even on Inspire 500 speakers which I own.
    It seems that in my case it was the duo of chipset or Gigbayte motherboard and X-Fi Elite Pro. That doesn't excuse Creative from creating good drivers, but the good thing is that I got my X-Fi back sounding really really cool!!!
    PS I use Robert K PAX Drivers.

  • Really strange musical fonts have appeared

    Just today I was using pages when i noticed these really strange musical fonts had appeared:
    There are alot more of these wierd fonts: these are just a few examples.
    i have this musical creation program on my computer called Sibelius First 6: I was wondering if that was the cause.I don't use it much and am on the trial version, so I could uninstall the program if it would fix this strange issue.
    Thanks

    cereskit,
    If you are really using 10.6.4, updating your OS may solve the problem.
    It would be best to download and install the 10.6.7 combo update and then run Software Update.
    Jerry

  • GT70 Barebone - Strange issue after upgarde to GTX980M

    Hi
    I just upgraded my Laptop (Medion Erazer X7825) with a GTX980M. Amazing card - fast - silent - a dream.
    Unfortunately I'm having a real strange issue with that machine now:
    Booting with a external screen connected to HDMI crashes the Intel HD4600 driver and the fan starts to spin real fast. I checked CPU and GPU temps but they seem perfectly ok (about 50 degree celsius). In addition the backlight of the laptop screen is lit but it is not detectable or usable.
    Booting without external screen and everything is fine. If I connect it after boot the machine switches the main display to the external screen and the laptop screen is not lit any more. Everything fine so far.
    Once I activate the Laptop Screen as second screen however the fan goes crazy again after a few minutes. The only good thing is - I could in theorie use both screens that way.
    If the fan spins up it does so suddenly and violently and without any obvious reason: CPU and GPU temps are really low and no 3D app is running.
    Medion is selling the same machine (same chassis, still GT70 based so I assume same hardware) with a gtx980m pre installed. However Medion is not providing any firmware updates for the Erazer series.
    I think this is an issue that is most probably related to bios and/or vbios and could be fixed. I just need to get in touch with someone who has access to the right ressources and know how.
    If someone could help me with requiring either the bios and vbios of an Medion Erazer X7835 - OR with a matching MSI GT70 Bios and a better GTX980M MSI bios than I have that would be a great help. Last step would be to advise me a little on how to flash because the medion bios is crippled - i CAN'T disable secure boot unfortunately.
    Any other help or advise with the issue would also be highly apprectiated.
    My GT70 Bios reads:
    1763EM71 and E1763IM7.50B
    My GTX980M vBios reads:
    84.04.22.00.0A
    UPDATE 2014-12-21:
    I also just found out that the way I connect the external monitor does also make a difference: If I connect via VGA cable the intel HD driver is not crashing even when I connect before boot. And the fan is keeping it's silence - at least as far as I can tell right now.

    Quote from: chc on 25-December-14, 17:42:17
    Really weird symptom.....But why you think that Intel Graphic driver crashed?! Have you seen other failure besides fan went nuts?
    Yes. The device manager showed an error with the HD 4600 iGP. And the intel HD control panel did not show up. Furthermore the internal display was not detected/unusuable.
    So this is where I stand right now:
    With the help of a very kind soul here I updated my Bios and EC to a very recent Medion version.
    The intel driver is not crashing any more with the monitor connected using HDMI at boot.
    However the fan/EC is still going into panic mode after a random time.
    With the new bios/ec firmware I can run 3d benchmarks for hours as long as I do NOT connect the external screen. The intel driver seems also to be not crashing any more. As soon as I do connect an internal monitor after some time - fan in panic mode and does not calm down again.
    All temperature readings I can see a perfectly fine (CPU, HD4600 GPU and 980m GPU).
    I'm really desperate right now. I THINK it is somehow connected to optimus and an issue with intel igp + gtx980m.
    I would like to try another vBios if I could just get a hold of it.
    Right now it's reading "84.04.22.00.0A (P04 B-oard)" (exactly this - including the P04 B-oard).
    If someone is able to share a newer/different MSI vBios or has the clevo bios the card had originally (which I lost) please post a link or PM me.
    I'm about to give up :(

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Files transferred to external HD end up in trash - very strange issue

    Hi,
    I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
    Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
    Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
    Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
    I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
    Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
    It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
    I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
    Has anyone experienced this or have any suggestions?

    Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

Maybe you are looking for