A reasonable hardware configuration for Linux OAS

Has anyone out there tried to run
Oracle 8 for Linux and OAS 3.02
all on the same toasted PC/pentium server?
Could you tell me the nature of your
hardware configuration (processor speed, ram, etc)
if you feel the performance is acceptable for
development (not for actual business operation).
The technical FAQ lists 48 megs and any
Pentium to run Oracle 8 for Linux which
verges on ridiculously low.
I just want to know a reasonable
configuration to run both Oracle 8 and OAS .
Thanks,
Heji
null

I have been runnig OAS/O8 on a Pii/300Mhz system with 128mb of
ram, and so far I have no real complaints on speed. I even tuned
the SGA to give a little better performance and still have around
40 or so MB free. BTW, I haven't really tried to mess around
with the Linux version of OAS, but have used the Solaris version
previously, have you noticed any problems with the wrb starting
up? I have seen some error messages saying "No processes..." or
something, looks like an error.. have you experienced this?
Tom Tyson
mark theodoras (guest) wrote:
: Heji (guest) wrote:
: : The technical FAQ lists 48 megs and any
: : Pentium to run Oracle 8 for Linux which
: : verges on ridiculously low.
: The install guide says 32M minimum for O8. I'm not sure with
: OAS. Given (pc) memory is cheap, I am running O8/OAS3 with
128M,
: with no complaints.
: Given laptop memory is not so cheap, are there folks running O8
: and OAS3 with 48, 40, or less ram ????
: I can second any pentium would suffice. I am using P133 & P166
: systems, and the CPU is NOT the bottleneck.
: Mark
null

Similar Messages

Hardware configuration for BI 7 Cleint

Hi All,
What is the minimum hardware configuration for BI 7 Client installation?
user will use a BEx for the report analysis
Regards,
Godhuli

Hi ,
The note is currently for internal checking as it has undergone some internal checking.I am just pasting the note info in this reply.
The Business Explorer of SAP NetWeaver 2004s is supported for the Win XP and win2000 platforms. The hardware and software requirements under the different platforms are given below.
software requirement for Windows XP
   OS    : Windows XP
   Browser : IE 6.0
   Excel : 2002 and 2003
software requirement for Windows 2000
   OS    : Windows 2000
   Browser : IE 6.0
   Excel : 2002 and 2003
.Net Framework version 1.1 is a pre-requisite for the Business Explorer of SAP NetWeaver 2004s in both the platforms. It's a freeware, which can be downloaded from the Microsoft site.
Older versions of Microsoft Excel, for example Microsoft Excel 97 and 2000, are not supported. On the browser side Firefox is not supported at present.
Hardware used in this case is Pentium 4, 2.8 GHz,1 GB memory and 40 GB HDD. The Hard disk space and Min and recommended Memory usage for the Business Explorer of SAP NetWeaver 2004s is mentioned below
    HDD Space   : 380 MB
    Memory Min : 384 MB
    Recommended : 512 MB
Note: The actual memory used under Windows XP platform is 146 MB.The amount of memory used by OS before SAP GUI installation is 137 MB The amount of memory used by OS after SAP GUI installation is 283 MB
(256 MB is still sufficient for XP, but sometimes when SAP GUI is executed the system may start swapping)
you can also check service.sap.com/bi->Product Information SAP NetWeaver 7.0 - BI
Best Regards
Manoj Kumar

Need hardware configuration for server

Hi All,
Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
Thanks,
ATRSAMS

Hi Atrsams,
According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
Regards,
Charlie Liao
TechNet Community Support

Preferred Hardware Plattform for Linux RAC Cluster

What ist the preferred Hardware Platform
for using LINUX with Oracle RAC - Cluster solution ?
What do you prefer Suse or Redhat ?
Is there a tested Hardware Environment from Oracle Support ?
Thanks

You have the disk space, but not the memory, even discounting the memory for the Oracle VM hypervisor, OEL/RH5 is going to take at least 1G to run. So, with your base OS, hypervisor, Linux and Oracle (clusterware and DB), it may be possible, but I believe you would be swapping so much you would have terrible performance. I would look at a MINIMUM of 3GB if not 4GB RAM to try this configuration.
Cheers
Jay
http://www.grumpy-dba.com

Specific Hardware Configuration for a new ATG Project

Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.

Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ???

Best Hardware Configuration for oracle RAC

Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AM

aram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers

Hardware configuration for 5.5

Hello Everyone!
I am a total newbie......
Anyway, I just purchased a new computer. Although many of you would laugh at what I bought, it was all I could afford. There are some good things about it and some probably not. My question is, I bought a 1.5 Tb hard drive (only 1) and I am wondering what is the best configuration for it? Should I partition it, etc.
As I said, I am a total newb at this and I am just beginning so I will not be making re-editing any motion pictures anytime soon but just taking old 8mm family stuff and working with this as my practice stage.
Thanks,
-myParkster

NEVER EVER do a partition !!!
Read http://forums.adobe.com/thread/650708?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Hardware Configurations for Oracle 10g AS

Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RK

Those parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support.

Hardware Acceleration for Linux with FireFox 4

'''Is this just a myth?'''
I am using Ubuntu 10.04 64-bit and FireFox 4 stable with a GT 240 and the latest nvidia binary driver. I have this set up as a HTPC through HDMI cable and have audio as well through the HDMI. It works wonderfully! I can watch x.264 and my intel celeron 2.8 GHz doesn't even get out of bed thanks to hardware acceleration.
Now, that is NOT the case while on the web... It is a tall order to watch HD quality flash (although with the [http://demos.hacks.mozilla.org/openweb/HWACCEL/ mozilla hardware stress test] I get 45 FPS). It seems to be that hardware acceleration is still very much in its infancy in the linux environment with firefox 4.
After searching through many threads I have come to find some useless information.
''MOZ_ACCELERATED=1 MOZ_GLX_IGNORE_BLACKLIST=1 firefox'' - does nothing
''layers.acceleration.force-enabled=true'' - does nothing
There seems to be an issue with firefox not recognising the installed graphics card. On Windows machines, the about:support page will report all the graphic card information in the Graphics section in addition to '''GPU Accelerated Windows 0/1''' or '''1/1'''. This seems to NOT be the case in linux. Why? Why doesn't firefox discover the installed graphics card?
Now, if I have missed a memo or been a total newb in this attempt to take advantage of Accelerated Hardware in FireFox 4 for linux '''PLEASE ENLIGHTEN ME''' as to what I need to do. If I have done all the things needed to achieve hardware acceleration and it is just not possible, than the good 'ol folks at mozilla should be a little more transparent when they proudly proclaim that they have released a hardware accelerated browser.
If anyone can shed some light on this predicament please post. If anyone has hit the same wall as I have please post... rant... w/e...

MulTirow Bookmarks Toolbar For FireFox 4 Here >> http://userstyles.org/styles/29428
STEP 1: INSTALL ADDON >> https://addons.mozilla.org/addon/2108?src=external-installbox
STEP 2: GOTO >> http://userstyles.org/styles/29428 + CLICK "INSTALL WITH STYLISH"
STEP 3: RESTART FIREFOX 4

Your Hardware configuration for RAC.

Hi,
What would be the best hardware solution for your regarding RAC? or put in another way, what hardware configuraton you are using for your RAC?
regards,

hi
As good as you could provide for your RAC. RAC could be built on simple
P IV machines having a shared storage and two NICs with 100Mb speed connected via low speed network.
If i would be using a 2 node RAC, i would use two 64-bit server class machines with 4G RAM each, high speed shared storage, and Nodes connected through GB speed NICs with fiber optics.
It would really give me a lot of satisfaction.
Regards

Better hardware configuration for using JDeveloper

Hi,
What is the better configuration for using such since every time I felt absolutely slow when using it?
Thks & Rgds,
HuaMin

HuaMin,
Kind of hard to say what's better, since you don't tell us what you currently have. However, I find that RAM is your friend when running JDeveloper. I've run JDeveloper 10.1.3.x on various laptops (both single and dual core) with 2GB of RAM and performance is quite good. The CPU speeds that I've used are generally in the 2GHz range. My current setup is a dual core 2 GHZ with 2 GB of RAM and I'm quite happy
John

Not working Webutil configuration for linux

I had configured webutil in linux server as per document. my basic cofiguration is
OS - Linux redhad(4.0)
Front End - Forms [32 Bit] Version 10.1.2.0.2
Now i had created form in that form i m using webutil when on test button i m calling
show_webutil_information (TRUE);
It is showing all the webutil information
But on another button i m calling
v_ole_excel := client_ole2.create_obj ('Excel.Application');
client_ole2.set_property (v_ole_excel, 'visible', 1);
it is not working and after that none of the push button & menu is working in runtime form.
So Please Guide us to resolve the problem.
Thank's in anticipation,
Regards,
Ganesh Jadhav

Loading TUI files in Linux it's an issue that we have recently discovered and it did not made it yet to the known issue list. I'm not 100% sure but I believe a workaround to that problem would be to go and manually edit that tui file and remove those attributes that generates errors. You can begin with ATTR_TITLEBAR_STYLE and then look if one of the following are in the tui file: ATTR_DS_BIND_PLOT_STYLE, ATTR_DS_BIND_POINT_STYLE, ATTR_DS_BIND_LINE_STYLE, ATTR_DS_BIND_PLOT_COLOR and delete them. Then try to load the tui file again.
On the other hand I think there is a workaround for your original problem: the predefined fonts (VAL_DIALOG_METAFONT) looks bad on Linux. I believe there is a way a user can change the underlying font and the size of a predefined font. In windows you can change it in the registry but in Linux you can define an environment variable: XAPPLRESDIR that points to a directory that should contain a file named cvi, a file where you can write font settings. Each line has to be of the following format: <appName>.<key>:<value>. If you want the settings you're writing to be persistent for all applications the put a "*"instead of the application name.
The list of possible key is: appFont (NIAppMetaFont), menuFont (NIMenuMetaFont), dialogFont (NIDialogMetaFont), editorFont (NIEditorMetaFont), messageBoxFont (NIMessageBoxMetaFont).
The value have to be of the following form: <font family>-<font name>-<font size>
Here is the only line I have in the cvi file: *.dialogFont : adobe-helvetica-19

Do i need the POST-INSTALLATION configuration for linux+oracle?

hello
i install the oracle10g on redhat9 box,JUST finish the installation,i open the Terminal windows,type Â¨sqlplusÂ¨ command,linux tell me Â¨commnd not foundÂ¨. i guest the installer donÂ´t set the env variable(in windows operating system,the installer automatically set the path variable during the install procedure).
i can SUCCESSFULLY access the browser console of em and isqlplus.
but after i restart the redhat,the browser canÂ´t access both
em and isqlplus(connection reset).when i telnet the 5500 and 5560 port,i found that they havenÂ´t be open.and i suspect that the oracle database havenÂ´t been automatically started.
question 1:how can i MANUALLY start oracle after i restart the linux?
question 2:how can i config the oracle after the install to make it work perminently?or post-install configuration.
thank you very much!

Oracle will not start automatically. You have to enter as oracle user and start the listener manually and then the database .
Command are like : lsnrctl start
Then , type svrmgrl ( the server manager console ) , connect internal , and then startup .
Later on you can write scripts for automatic startup of the database and listener .
G J Shankar Nath
Deputy System Manager
GNRC Limited

Hardware Configuration for Oracle DB on DELL Server

We are currently running Oracle 8.0.5 on Windows 2000 Advanced Server. This is a DELL PowerEdge 6600 server with 8 73GB Ultra SCSI Hard Drives. We will be upgrading to Oracle 9i in the future. Question: What would be the recommended Hardware RAID Configuration? We've heard that RAID 10 would be a good configuration to implement. What would be the best way for us to configure our server? We would like a high fault tolerance, good performance system. Our database isn't very large in size (10GB) but, we do require 24 x 7 availability. By the way, switching to a different operating system is not an option for us.

You've probably read this already; but, the documentation has some minimums: http://docs.oracle.com/cd/E26996_01/e18548/CHDJCIFD.html
The management server doesn't require anything special.
Regards,
Ian

Recommended Hardware configuration for VS

I was looking at how to improve the performance of my development PC and checked out the VS Virtual Machines on Azure. I noticed two main points,
1) they all seem to have a second drive that appears to be just for the swapfile/temporary files
2) they seem to use Windows Server 2012 as the OS
I also saw some recommendations for using SSD's for the main OS drive.
What are the recommended/optimal configurations? Are the advantages/disadvantages documented anywhere?
I can sort of see why (1) would help as my PC seems to be disk-bound but not sure whether (2) is significant or just to allow for SQL server development or something?
Also if I where to use an SSD is there an easy way to move all the appdata, temporary and other frequently written areas to a second conventional HDD?

Hello Terry,
SSD will increate performace when reading/writing files so you will benefit from this if you use it and do some IO operations. However I think Visual Studio performance do not just rely on this, the build process of Visual Studio is also related to other
of your hardware. It is hard to say how the performance will raise since it depends on so many things.
I will recommend you do this: If you don't need to read or write a project too offten, you can keep it in HDD. If you always use one project and want to increate the performance, please set this project in SSD.
For the appdata and temporary files, I cannot see them from VS settings, maybe you cannot modify them. But if you choose to install VS in SSD, I believe the performance will be better when read/write files.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A reasonable hardware configuration for Linux OAS

Similar Messages

Maybe you are looking for