A recent Photoshop CC update now selects the wrong video adapter and disables 3d

My asus laptop has an ivy bridge processor with included HD graphics and an NVIDIA 650M Graphics Adapter.  Until i recently updated Photoshop CC, i was able to do 3d without issue in Photoshop as the 650M has 2 GB of video ram.  Since the update, Phtoshop selects the Intel HD4000 which only has 32 MB of video ram, so 3d is disabled. 
I've tried the bios, even though all i did was update photoshop, and there is not setting for default.
I'm running win 7 home premium,8 GB memory

We have released a new update(14.1.1) for Photoshop CC, please update to the latest and let us know it ot solves your issue.
See the following thread for more info on the update:
http://forums.adobe.com/message/5674936#5674936
Regards
Pragya

Similar Messages

  • HT201412 I recently received an update option with the iOS 6 update on my iphone 4. I pushed ok and after 30 minutes it told me to connect to itunes and reset my phone. I did and the results are my phone now has a blank grey screen and then powers on and

    I recently received an update option with the iOS 6 for my iphone. After clicking ok, my phone wanted to conect to itunes. After that it wanted me to reset the phone and after all of this was done my iphone had a grey screen and now turns on and off again on its own with out ever going past a grey screen. It will not reconect with itunes of function at all. Please help

    http://support.apple.com/kb/HT1808

  • After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have

    After re-installing Win 7 64 on my computer, and attempting to install my copy of Adobe Photoshop Elements, I now get the following message: "This version of Photoshop Elements requires MS Internet Explorer 4.0 or higher to be installed". Does anyone have an idea of what the problem is? It has always worked in the past.

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • When I go to a particular website I selected the wrong thing on the login now every time I tried to go to that site it redirects me to my search menu

    When I go to a particular website I selected the wrong thing on the login now every time I tried to go to that site it redirects me to my search menu and can't find the site.
    this is the site i want to go to --- https://delphisso.am.joneslanglasalle.com/idp/startSSO.ping?PartnerSpId=360facilityprod
    And this is the site it redirects to --- https://support.mozilla.org/en-US/questions/new/desktop/other/form?search=When+I+go+to+a+particular+website+I+selected+the+wrong+thing+on+the+login+now+every+time+I+tried+to+go+to+that+site+it+redirects+me+to+my+search+menu+&step=aaq-question

    It sounds as if maybe you have just bookmarked the wrong thing.
    Probably the link you give in your post works if so use and bookmark that.
    If necessary clear cookies and cache and start again from
    * https://authn.joneslanglasalle.com
    See also
    * Reloading using Ctrl+F5 forces a reload without using the existing cache or see [[How to clear the Firefox cache]]
    * [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
    * If you have recorded the wrong login details you can force Firefox to ''forget'' about a site. But be careful it will lose also lose history and bookmarks for that site. <br /> [[Remove websites from the Awesome Bar suggestions#w_clearing-all-items-for-a-single-site]]_clearing-all-items-for-a-single-site

  • I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a

    I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
    Also I have noticed opened windows that I have not opened.
    I have verified the sharing folder and also the remote access but it not let me turn it off.
    Also I have add a password to my computer and even using the same one it looks like is not working.
    The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
    The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
    In system preferences in the sharing folder is showing everyone and staff.
    My computer is private I do not own a company and I do not have a network set up in my house.
    I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
    I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
    Any suggestions in how to fix this issue?
    I really appreciate.

    With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.

  • I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

    Hi sharkbiscuit79,
    Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013.  PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
    However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
    Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
    Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • I selected the wrong form and now I can't select a new form, HELP

    Help!!  I selected the wrong form and now I can't select a new form, can anyone help?

    I'm assuming you have a free account and created a form. You can just delete it and then you can create another. The free account allows you to have up to 1 form at a time. You just need to delete to create another.
    Randy

  • I have selected the Erase all contents and settings option in my ipod touch 4. till then i was not able to turn it on and even it was not detectable on itunes. what should i do now?

    i have selected the Erase all contents and settings option in my ipod touch 4. till then i was not able to turn it on and even it was not detectable on itunes. what should i do now?

    I am confused. You said till you Erases all contents and setting yu could not turn it and iTunes did not see it.  How could you Erase all Contents and Setting if you could not turn it on?

  • Hello. Layer masks aren't working with Photoshop CC... The brushes gave out, and now the gradients too. Anyone else have this problem?

    Hello. Layer masks aren't working with Photoshop CC... The brushes gave out, and now the gradients too. Anyone else have this problem?
    Will someone from Adobe please answer if this is a bug.. as I've seen other users post the same issue.
    thanks!

    I'm experiencing the same issue too. I can't see to use the brush in my clipping mask the same way. It works for a moment, then several minutes in to production it ends up crashing.
    I hope this issue is resolved soon. It's definitely frustrating and delaying my production time.

  • Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • I had my Ipod touch 4gen on itunes of computer that crashed. On new computer i updated it, hit the wrong button, and lost everything. How do i get my old songs, apps, and account money back?

    I had my ipod 4gen itunes on a computer that crashed. With the new computer I update it to the lastest version. I hit the wrong transfer button and lost everything. How do I get my old songs, apps, and money back from my old account, if thats possible?

    I cant find any of my recently bought songs or the apps i have purchased. When I was updating my ipod there was a button that asked about transfering purchases and I didnt read it, and I didnt update manually so i think thats why i lost everything. I clicked on the intrustions and clicked on apps and i coulnt find any of my old stuff.

  • I connected my iphone 4 to itunes and it automatically updated, now I am connected to icloud and all my pics are gone

    I connected my iphone 4 to itunes and it automatically updated, now I am connected to icloud and all my pics are gone. Also, I have all my sons contacts on my phohe.  How do I get my content back to the prior state?

    Hey kaylactm,
    Thanks for the question. I understand how frustrating this may be. To resolve your issue, it may be necessary to restore your device in recovery-mode:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • My mom typed in the wrong email addy and now her mail is locked.  It states that there is mail in her outbox but won't let me get to it.  any suggestions?  Thanks

    My Mom typed in the wrong email address and now her mail is locked. It states that it can't be sent because the server rejected one of the recipient's addresses. The message has been placed in your Outbox.  Now when I go to the outbox I can not access it.  It is like it's locked.  She has and IPad version 1.  Any help would be appreciated.

    This may be of help.
    http://apple-ipad-tablet-help.blogspot.com/2011/08/ipad-2-email-address-rejected -by-server.html
    If you can't use the mail app now - if it is frozen - quit the app and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close mail by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down onthe mail app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesnt help try resetting the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I am really angry that I get this message every time I try to update Itunes.  "The File 'C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi' is not a valid installation package for the product itunes.  Tr

    I am really angry that I get this message every time I try to update Itunes.
    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    What kind of gobbledegook is that?  Are you or Microsoft crazy.  Us computer users need simpler instructions.  Or you need to write your programs so that they work.
    Signed,
    Frustrated Apple User
    Dean Weaver

    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I accidentaly entered the wrong birth year and now can't set up sync, what can I do to correct this?

    when I was setting up my sync account, I accidentally selected the wrong year and the system thinks I'm under 13. I am now locked out of having a sync account.
    What can I do to correct the date or start over?

    Did you try to close and restart Firefox?
    If that doesn't help then try to reset the services.sync prefs that show user set (bold) on the <b>about:config</b> page via the right-click context menu to the default value.
    *http://kb.mozillazine.org/about:config
    *http://kb.mozillazine.org/Resetting_preferences

Maybe you are looking for

  • RE: Hard Failures, KeepAlive, and Failover --Follow-up

    Hi, It's a really challenging question. However, what do you want to do after the network crash? Failover or just stop the service? Should we assume that when the network is down, and so do your name service? One idea is to use externalconnection to

  • Crystal Reports XI connection problems - after updating to SQL Server 2008

    Hello! We have some ASP.NET 2.0 Applications that call some CR XI report files with parameters to generate PDF Files. After upgrading from SQL Server 2005 to 2008 the apps hang when trying to generate the PDFs. Some research with Fiddler showed that

  • Oracle Lite 10.3.0.3 Installation AIX 5L Issue

    Hi, While installing oracle lite 10.3.0.3 in AIX 5L, I see following error in repository.log. Any idea?:- Creating mobileserver OC4J instance ... Creating OC4J instance "mobileserver"... A new OC4J instance "mobileserver" is created in the group "def

  • Call one TF in other TF

    Hi, I have two taskflows... in each of the taskflow i have a default activity as home page when i am running independently these taskflows initially home page gets displayed But when i am calling the second taskflow in the first taskflow i want the h

  • MDM- Matrix Application Installation (.EAR)

    Hello, I would like to install the Matrix Application EAR file on the WebAS as mentioned in the installation guide. It says "Install the .EAR files on Web AS using the SDM in the SAP NetWeaver Developer". How do I proceed with that? I tried deploying