A recommendation to upgrade to Firefox 6.o just came out. When I started to upgrade, I was advised that my antivirus software would be disabled (Avasti) So far I have justmstopped the upgrade process as I want an antivirus running. Any suggestions?

If I upgrade I will not have an antivirus

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Similar Messages

  • HT1918 I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play.  Any suggestions?

    I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play.  Any suggestions?

    Why would you create a new account?
    All purchases will be tied to the account from which they were purchased.
    You will have to authorize your computer for all the accounts from which music is purchased.

  • Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i

    Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i update my ios? thanks Matthijs

    Get more information about your computer. Go to the Apple in the upper left corner of any window, then  "About This Mac".  Write down what it says about "version"and report that here.  Now continue to "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    If you have a PPC Mac you cannot sync your idevice without a newer computer.  See the end of this post for options.
    If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
    Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You can buy Snow Leopard at:
    Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After installing run the updater to 10.6.8, then upgrade iTunes.
    Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
    Options if you cannot upgrade:  iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there.  Backup your device directly to  iCloud over a wireless connection.  Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.

  • 10.10.3 keeps installing, now have it 3 times and it still wants to install. Any suggestions?

    Update 10.10.3 has now installed 3 times and still it wants to install. What can I do?

    Were you installing using the App Store? If so it may have timed out but still given you confirmation in the update window.
    Check by clicking on About This Mac under the Apple menu item. The first splash screen will tell you what version you are running.
    If it is still the previous version then i would suggest to download this from Apples support and download page as it is quicker and more reliable.
    OS X Yosemite 10.10.3 Combo Update

  • I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

    I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?

    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This will install the version of OS X that originally came with your model if you have a model that supports Internet Recovery - 2010 models and later: Computers that can be upgraded to use OS X Internet Recovery.

  • Suddenly Firefox is crashing just as I hit send on an email...losing everything I've written! I hate IE, too. So what's the best browser?

    Suddenly Firefox is crashing just as I hit send on an email...losing everything I've written! I hate IE, too. So what's the best browser?

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
    *Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
    If necessary then you can open <b>about:</b> pages via the location/address bar.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • Using Audition 2.0 on Windows XP platform.  Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition.  Any suggestions?  Thanks very much.....R

    Using Audition 2.0 on Windows XP platform.  Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition.  Any suggestions?  Many thanks, R.

    VC6. is rather old, but you can try to convert the VC6 project using the upgrade wizard of VC2012. Depending on the content of the project your code will work more or less without problems, at least it will compile without errors.
    You could also go the 2nd way and create in VC2012 a project type using the wizard that is very similar to your current VC6 projcet (MDI, SDI, Dialog Based, ...). Than you replace the files generated by the wizard with the content of your project. Sometimes
    this way is more successful.
    But at all the automated converting success depends on the code of your VC6 project. I had both, conversions without big problems and also conversions that need a lot changes to run on a current VC version.
    Best regards
    Bordon
    Note: Posted code pieces may not have a good programming style and may not perfect. It is also possible that they do not work in all situations. Code pieces are only indended to explain something particualar.

  • I copied this from your 5.0 download information: "All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again." When I opened my computer today all my apptabs from yesterday had disappeared. Why?

    Your download page for 5.0 stated: All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again.
    I liked the convenience of using App Tabs and was disappointed to find that the ones I had set up yesterday were gone today. Am I doing something wrong?

    Works fine for me, I can simulate your problem by improperly closing Firefox.
    The correct way would be to close the windows you don't want and then to exit Firefox through the File ("'''Alt+F'''") menu then use '''Exit''' or '''Qui'''t depending on your system.
    But '''I can simulate your problem''' by closing the good window with "X" in the upper right-corner first (the one with the app-tabs) and then close the other window by any means.
    You restart Firefox and open a window, since you closed without app-tabs there are none so you just see a window with your home page.
    Firefox has some things added to Firefox 4 and therefore in Firefox 5.
    # "'''Alt+S'''" (Hi'''s'''tory menu)
    # "'''Restore Previous Session'''" (that's the window without the app-tabs, but you have to this first)
    # "'''Restore Recently Closed Windows'''" -- can choose which window to reopen based on name and the mouse-over tells how many tabs. or you just use "'''Restore All Windows'''" without the guessing.
    ''I know you are on a Mac, and this affects Windows user more than anybody else, but it does affect other systems besides Windows, occasionally, perhaps more often now with the plugins container.''
    The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
    '''Plug-in and tasks started by Firefox may continue after attempting
    to close Firefox''' The "X" in the upper right-hand corner closes the
    Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
    it does not necessarily close Firefox .
    The only '''proper way to exit Firefox''' is to use '''Exit''' through the
    File menu, not the "X" in the upper right corner of last Firefox window.
    In the Firefox 4 and 5 that would be Alt+F then X
    * '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
    Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
    If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
    http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
    '''Avoiding Problems with close/restart''' ''choose either extension''
    :Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
    Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
    *"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
    *For older versions use "'''QuickRestart'''" extension (34 KB download) (<br>https://addons.mozilla.org/firefox/addon/3559/

  • We have included the Delete Processes

    Hi all,
    We have included the Delete Processes to some of our Process chains in the Development server.Now we want to test these process chains in the development server itself so that we can then transport them into quality.Can anybody advise me how to go about this.I mean scheduled the data loads at the info package levelSo when we click on start,It gives us another screen whic shows Request overlap...and so on.Can anyone make this clear.Thank you

    You must be try doing init load with selection parameter.
    You are not alllowed to have two init load with same selections.

  • IOS7  just came out  I am in China with my Iphone 5 and my MacBook Air.   I bought a gift of a Mini  and gave to a friend.  He has been notified of upgrade to IOS7   When do I get my notification for upgrade?

    IOS7  just came out .  I am in CHina.  Have not received notifcation for either my Iphone5  or my MacBook Air.   However,   I purchased in the US a new mini for a friend who is presently in CHina a few weeks ago.   He has already gotten notification to upgrade to IOS7   I look every day in Itunes,  Apps    but still have not received link for upgrade.  Any help?

    there is no update for the Air
    iOS7 is only for. iPads and IPhones
    To check on your phone go to settings > general > software update
    It should show there already

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

  • Need help with BES 10 activation error: "Device activation can't be completed because the setup process or a training tutorial is running"

    Hi All,
    I am having a hard time finding any info on this activation error, and I really can't get to the bottom of it.  When I enter my companie's activation code for the BES 10 network, it gives me the following message:
    " Device activation can't be completed because the setup process or a training tutorial is running on your device.  Try again later."
    It would be nice if the msg could be a little more specific!  But anyway, I have tried all the traditional fixes, battery pulls, re&re to BES, etc. but still nothing.  My last option is to wipe and see if that works but curious to see if anyone has run into this before.
    PS I have a Z10 STL100-3
    Thanks in advance! 
    cheers

    Good. excellent solved service blackberry
    Thanks. aspataro
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage "    ". Do you want to stop running the script, or let it continue? If I  click on continue it just continues,

    I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage "    ". Do you want to stop running the script, or let it continue? If I  click on continue it just continues, stop, it stops.  How to correct this annoying message?

    Disable Javascript for those webpages.  Note, your Javascript is probably antiquated by now.  Try a different web browser, or contact the website and let them know they aren't as accessible as they could be*:
    http://www.macmaps.com/browser.html

  • I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

    I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

    Google

  • After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    After upgrading iPhoto on my MacBook Pro running OSX Yosemite 10.10.3 it continually keeps asking me that it is preparing library. This has happened 5 times now and I can't access my photo's through iPhoto, any suggestions?

    There is no upgrade to iPhoto with OS X 10.10.3 - here was an update to version 9.6.1 a few months ago and Photo 1.0 was added with 10.10.3 - what software and which version are you having trouble with - iPhoto or Photos?
    LN

Maybe you are looking for

  • Tumiki fighters PKGBUILD - help! [solved]

    This is my first PKGBUILD and I'm having a bit of trouble with it as this is a binary app, so no need to compile.  It's in the D programming language so it would have to use a non-open-source compiler anyways.  Of course, I should mention again which

  • Yosemite and Illustrator 6 Java error...

    I downloaded Yosemite and now I get an error when trying to open Illustrator about a Java update. Loaded the update. Still no joy. What now? I can't open Illustrator at all now. I keep getting an error message. Says. I clicked on More Info...  It's s

  • ALV Hierarchical in OOPS

    Hi , Is it possible to have a ALV hierarchical display in a single screen using ALV with ABAP objects.

  • Can't activate ipad ios 7, need to bypass activation

    Can't activate Ipad, previous user was terminated and not available. I want to reissue this device to a new person but can't activate it. is there a way to bypass activation?

  • "Connect to iTunes" screen - Issue with 4.1 update installation

    I recently attempted to update my iPod to version 4.1, once the update had almost finished installation I got an error message with the number 1602. Now my iPod shows the "connect to iTunes" screen: http://km.support.apple.com/library/APPLE/APPLECARE