A report that shows all the elements with their setting

Hi
Is there a way to write a report in discoverer which will show all the elements set up in Oracle with there settings e.g. are they taxable or niable etc.
Alternatively is there a standard report in HRMS which would give the same results.
Thanks in advance

Not really as such. Taxable and Niable elements feed to the appropriate taxable or niable balances therefore, you will need to run a report against what elements are fed into these balances. I doubt that there will be anything as standard in teh pre shipped EUL's that will enable you to do this, however, for simple one of why don't you just call up teh balances in teh application and see what elemenst feed into them.
Cheers
Scott

Similar Messages

Vendor report that shows all vendors missing tax id information

I would like to create a report that shows all vendors that are missing the tax id information. Please direct me on where to go.
thx
Trace

Dear,
Enter T-code MASS.
Select Object Type LFA1 and click on execute button.
Than click on Fields tab, Find your required field and click on execute button.
Than enter vendor list for which you want to find out the list.
And click on execute button.
Regards,
Mahesh Wagh.

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

When I type in "www" in the navagation space I get a drop down that shows all the web sites I have visited! How do I turn this off?

# Question
When I type in "www" in the navagation space of the home page I get a drop down that shows all the web sites I have visited! How do I turn this off? edit

That drop-down shows matches from your History and/or Bookmarks. To change what is shown, see "Controlling Behavior" in this article:
*https://support.mozilla.com/en-US/kb/Location%20bar%20autocomplete
 
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Cost Centre report that shows all Tax Codes

Hi there,
We're trying to run a cost centre report that shows the tax codes relating to all expenditure, but Tax Code isn't an option in KSB1. Is there a way that it can be imported, or another report that we can use?
We need the tax code in order to be able to report on expenditure and tax paid / not paid for HMRC.
Thanks,
Michelle

Hi,
Cost reports KSB1 show only CO documents posted on cost centres. You can reconcile CO data with FI only for accounts which are relevant for CO, that is accounts defined as cost elements (normally, these are P&L accounts). If you want to see all CO documents, it's better to use KSB5 transaction as it shows all CO object postings, and not only cost centres. If you have some internal CO postings (manual postings, allocation, etc.), then they won't be shown in FBL3N and you have to consider this also.
Regards,
Eli

Want the Report to show all the records but side by side not a list of 15

I created a report and the report shows a list 1 to 15, I want it to show all but next to each other how do I do that?

I'm not sure I understand Your question but in Report Atrributes U have a "Layout and Pagination" field - there U can change Pagination Scheme. Maybe one of default will help U to receive what U want

Crystal report not showing all the table in SAP CRM

Hi
I am connecting crystal report 2008 using open sql connectivity (SAP table, cluster or Function ) with SAP CRM system. It is showing some of custom tables under "DD" but not all.
Wanted to understand what setting make a new custom table (transparent) to show under DD in SAP table, cluster or function connection
Help is greatly appreciated
Thanks
Padmanabh

Hi Rao,
Try to edit the following registry and check
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\FetchOptions\NTablesMax
Give the value as 20000
Thanks,
Sastry

Report that show FI-allocation different with CO-allocation

Dear Guru:
I run FI-allocation with change the profit center amount this not effect CO-allocation.
any report in standard that show different with CO-allocation in profit center.
or any table that I can do abap repor t myself.

HI,
Go to T.code : FAGLGA35 or 4KE5
Thanks,
Raviteja

Trying to create a report that shows all 8.1 machines missing update 1 (KB2919355)

Currently I have a report that polls every machine that talks to our SCCM 2012 server and only displays Windows 8.1 machines.
I'd like to modify the code where it will only show the 8.1 machines that are missing Update 1. That way we can go through and patch the ones that need it. Is this possible?
The existing query looks like the following:
SELECT
SCCM_Ext.vex_R_System.Name0
,vMacAddresses.MacAddresses
,v_GS_PC_BIOS.SerialNumber0
,v_GS_COMPUTER_SYSTEM.Model0
,SCCM_Ext.vex_R_System.Operating_System_Name_and0
,v_GS_COMPUTER_SYSTEM.UserName0
FROM
SCCM_Ext.vex_R_System
INNER JOIN vMacAddresses
ON SCCM_Ext.vex_R_System.ResourceID = vMacAddresses.ItemKey
LEFT OUTER JOIN v_GS_PC_BIOS
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_PC_BIOS.ResourceID
LEFT OUTER JOIN v_GS_COMPUTER_SYSTEM
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
WHERE
SCCM_Ext.vex_R_System.Operating_System_Name_and0 like '%6.3'
ORDER BY SCCM_Ext.vex_R_System.Name0

Here is the code I use to pull 64bit machines that don't have CU1 (BTW cu2 is now out):
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SY STEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM .Client from SMS_R_System inner join SMS_G_System_SMS_ADVANCED_CLIENT_STATE on SMS_G_System_SMS_ADVANCED_CLIENT_STATE.ResourceID
= SMS_R_System.ResourceId inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId where (SMS_G_System_SMS_ADVANCED_CLIENT_STATE.DisplayName = "CCM Framework" and SMS_G_System_SMS_ADVANCED_CLIENT_STATE.Version
!= "5.00.7958.1203") and SMS_G_System_COMPUTER_SYSTEM.SystemType = "x64-based PC"
Minor mods to this or your code should do the trick.
...I see you're talking an update to the OS, rather than SCCM update. Still hopes this helps.
Ben JohnsonWY

Generate a report that shows all customers that have changed groupcodes

We use our groupcodes on the business partner to define retail customers, wholesale customers or vendors. I have been requested to generate a report by data range any customers who have changed from retail to wholesale.
The information can be viewed via the change log one record at a time, but the user is requesting a report by date range. So they can say in the last 30 days what customers were retail and are now wholesale.
How can I access the data in the change logs?
Erin

Hi Erin,
There is a 3rd party tool for SAP that can generate standard ALV reports. It is based on an sql editor, and the report can be generated with a few clicks.
Read a bit more here: [alv report generator|http://www.hovitaga.com/report-generator-overview]
See it in action: [Report Generator video|http://www.youtube.com/watch?v=cKSBvz_sd98]
Download a free version from here: [Download free version|http://www.hovitaga.com/try]
I hope this helps.
Best regards,
Tamas

Report that shows material master record with sales text

We have a requirement to pull the material number along with the material sales text from the material master. Does a standard report exist that includes the sales text (from the sales text tab in the material master record?)
Thanks in advance.

Hi,
There are not any SAP Standard Report.
The item texts are stored in table
STXL - STXD SAPscript text file lines
You need to retrieve the Text maintained using the Function module
READ_TEXT
goto SE37 , & Click on test enter the details
Text Object MATNR
Text Name 6000000376
Text ID 0001
Language EN
And execute the Text maintain in the Text ID - 0001 - Sales Text will be retrieved.

How to run report to show all the records in the form view of Siebel 8.1.1

Hi.
My template has "for-each" section and there are more than 1 records in the form view. But when generating report, there is only one record in the report. Can anyone offers help? Thanks a lot.
Edited by: user11948585 on 2009-11-18 下午6:08

Hi ,
Could you generate a sample XML from BIP Administrator for the IO on which report is based , and apply it to RTF and see if you are getting the desired values.
Thanks!!

Firefox 4 deleted the feature to the right of the "go forward one page" button" that showed all the websites I'd visited in the chain from Home to the present one.

There was a little arrow in Firefox 3 to the right of the "go forward one page" arrow that I could click and it would display a list of the websites I'd viewed since I left "home". That is missing in Firefox 4. It is very tedious to have to "go back one page" over and over until I finally get to Home [or another earlier website]. Some websites won't even let me "go back" beyond their own websites, so I have to close Firefox altogether and start over, to get to a previous website. I really miss that little arrow!!

Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
Or install this extension to get the old "drop-marker" button restored. 
https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

How do I go from a full screen view back to the view that shows all the toolbars, etc.?

I am using Mac Leopard 10.5.8

Press the F11 key to toggle into and out of full screen mode.
Or, move the mouse pointer to the top of the screen and right-click the "+" (new tab) button, or in a blank area of the tab bar, or in a blank area after the address box, and exit full screen mode from the context menu.

A report that shows all the elements with their setting

Similar Messages

Maybe you are looking for