A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

Similar Messages

"An error has been detected with a required application library and the product cannot continue. Please reinstall the application.

I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
I am now unable to open any pdf?
Any words of advise here how to fix this problem?
Thanks!

** Moved to Acrobat Forums for quicker and accurate resolution steps ***

An error has been detected with a required application library and the product cannot continue. Plea

I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
"An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
It appears that a vital part of the program is being blocked.
Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
Thank you!
-Dan Sacapano

Anoop,
Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have not received any such message as the one seen on that page.
Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
Thank you,
-Dan

Product extension oracle.odi could not be loaded. The product cannot start.

Hi everybody!
i hava a problem in running odi on IBM AIX, when i write ./odi.sh. the odi can not start ,
"Product extension oracle.odi could not be loaded. The product cannot start." This is error message, why?
by the way IBM AIX's version is 5.3, ODI'S version is ofm_odi_generic_11.1.1.3.0_disk1_1of1 ,It is correct?
Pleass help me to solve it!

user10795526 wrote:
hi,
Can you tell us how to solve this iusse??Wait for Oracle to certify the software on the platform in question. You can run the ODI Server components but will have to run Studio on a supported platform.

"An error has been detected with a required application library"

Hi All,
I installed Audition 3.0 on a new laptop running Windows 7 Home Premium. The installation goes fine but when I try to run the program it fails and I get this message, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application." I've tried reinstalling many times but it doesn't help. Any ideas?
Thanks,
Billy

There's a good chance the software is too old and is not compatible with Windows 7. One thing you might try is to uninstall and then install the new CS6 trial version and see if that works properly for you. If it does, then it is not a mchine issue (except that the machine might be too new for the old version).

Weblogic.application.ModuleException: Failed to load webapp: 'oim'

Hi All,
1----> i am getting the following error while starting the OIM11g.
<Apr 20, 2012 10:31:57 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error weblogic.application.ModuleException: Failed to load webapp: 'oim'.
weblogic.application.ModuleException: Failed to load webapp: 'oim'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.iam.consoles.faces.navigation.common.ShortcutNavigationServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
2-----> OIM is in to Running Mode but when we tried to access it we are getting the following error.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Thank you

Hi even I am getting the same error now. I had done some branding changes in iam-consoles-faces war file and then replaced the original one and restarted the server. But then the server started throwing this error and OIM application is not deployed at all so unable to access the oim console. Did you find a solution for this?? Can anyone please help me. Its rather urgent. Also before these errors stated above are thrown I get the following two lines on the server logs :
<Jul 25, 2012 9:22:29 AM IST> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element ejb-jar in the deployment descriptor in C:\Oracle\Middleware\Oracle_IDM1\server\apps\oim.ear\iam-async-mdb.jar/META-INF/ejb-jar.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 24, 2012 7:26:38 PM IST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Oracle\Middleware\Oracle_IDM1\serv
er\apps\oim.ear\iam-consoles-faces.war. Please make sure that the annotations are valid. The error is oracle.iam.consoles.faces.navigation.common.ShortcutNavigationServlet>
Thanks,
$id

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

Airport fails to load and even to be reconfigured via wifi

airport fails to load and even to be reconfigured via wifi

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

HP1102 Driver failed to load and printer not recognized by Win8.1

Dear All,
I have very weird problem and for the last 3-4 days I couldn't succeed to find any tangible solution to that which cause me to pull my hairs. I have bought a HP LaserJet 1102 printer and have new laptop which stubbornly denies the installation of printer into the printer category, original smart isntaller always fails . It constantly getting installed as unknown device, but the name in device manager is correct under the unknown devices ( "HP LaserJet P1102").
I followed the http://h10025.www1.hp.com/ewfrf/wc/document?cc=tr&lc=tr&dlc=tr&docname=c03327635 instructions
wihtout sucess, printer is really not recognized by OS Win8.1. Runing the HP Print and Scan Doctor retrieves that printer is connected but the diver is not installed. So what am I supposed to do to solve that problem.
Your guidance will be appreciated,
Regards,

Hi @HP1102_User,
I see that you are having issues setting up the printer on Windows 8. The driver won't load and the printer isn't being recognized properly when running the Smart Install. I will certainly do my best to help you.
Is this printer the Laserjet P1102 or the Laserjet P1102w? How Do I Find My Model Number or Product Number?
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable shouldn't be longer then 6 feet. Try another USB port on the computer. You might have to try another USB cable to see if that is causing this issue.
Check the USB port on the Laptop, to see if it is a 2.0 or 3.0 port.
How to determine whether a USB 3.0 device is operating at SuperSpeed?
Try and update the driver from the Device Manager in Solution two: Software troubleshooting.
'Device setup failed to complete' or 'Unknown device' Message Displays in Windows during USB Install...
You can follow this document for either printer model.
Windows 8 steps: Click the Windows Key + X to open the Start Menu. Select Device Manager from the Start Menu. (if you are still having issue go back to the beginning of the document)
Then check the power management settings also in the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows computer to limit or turn off power for this device.
If you are still having issues, download and try to install the newest drivers for the printer.
Delete the printer from the Device Manager and disconnect the USB cable first.
Temporarily turn off any Antivirus Software, to make sure it doesn't interfere with the install.
HP LaserJet Pro P1102 Printer Drivers.
HP LaserJet Pro P1102w Printer Drivers.
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

How do I close multiple documents opened in Finder when the files are loading and the Application is not responding?

I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
(even when I unselect the 'restart opened programs' box.)
I really hope someone knows how to troubleshoot this problem I am having!

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

Export Release Build Flash Builder 4.5 fails to load over the web.

Exported Release Build Application fails to load over the web. You can reproduce using the following steps:
1. Create New Flex Project in Trial Flash Builder 4.5.
2. Use the default Flex 4.5 sdk.
3. Configure as a web application.
3. Place the following MXML code in the main application file:
<?xml version = "1.0" encoding = "utf-8"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark"
xmlns:mx = "library://ns.adobe.com/flex/mx"
minWidth = "955"
minHeight = "600">
<fx:Declarations>

</fx:Declarations>
<s:TextArea text = "Hello World!" width = "100%" height = "100%">
</s:TextArea>
</s:Application>
3. Save the main application file and Export Release Build to bin-release.
4. Place all files in bin-release on IIS web server in a web accessible location.
5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
Actual Results:
Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
Expected Results:
Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
Workaround (if any):
Deploy on an Apache web server.
The tests were run on IIS 7.x (7.0 for one, and 7.5)
Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
Flash Player 10.3.181.14
Example failing website:
http://staging.ibenergy.com/Test.html
Any idea as to why my exported release build fails? Any help would be appreciated.

Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
The URL you mentioned gives me a 403 forbidden error.
-Anirudh

Teststand error states that a vi failed to load in the Labview Run-Time Engine

I am getting an error in teststand that states that a vi failed to load in the Labview Run-Time Engine version '14.0.1'
If I look at the software loaded on my system with the NI Measurement and Automation Explorer I have Labview Run Time engines for version 2009, 2010, 2011, 2012, 2013, & 2014 on my system.
How do I get this VI to run on this system when it is called by test Stand?
Thank you

The RTE 14.0 was loaded as part of my deployment and after I ran this I got an update notice for the F1 patch which I also loaded.
I do not have labview loaded on this system, only the run time engines from running my deployment.
When I launch t he teststand sequence, when it calls the labview VI, I get the following error moessage:
Error: Failed to load VI 'C:\builds\RelayVoltageMeaure.vi' in the LabVIEW Run-Time Engine version '14.0.1'. LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it. VI Path: C:\builds\RelayVoltageMeaure.vi[Error Code: -17600, Failed to load a required step's associated module. ]
I have attached the teststand sequence if this helps.
Thanks
Attachments:
QuantumDigitalBd.seq ‏13 KB

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Failed to load resource the network connection was lost

I am uploading a 2 gb file into my application using chrome in my MacBook Pro, i keep getting an error (FAILED to load resource: net::ERR_CONNECTION_RESET) when the file is 100% uploaded and the file starts uploading from the beginning (1%... and so on). This issue is not happening when i am doing the file upload using chrome in my windows 7 machine. I Also noticed in the same MacBook if i upload through Safari i get the same error (failed to load resource the network connection was lost). Please let me know what additional information i can provide technically.
Regards,
Charan

common guys..nobody have any solution for this...i have seen many people complaining about large file upload issues in MacBooks which wont happen in windows.

A required application library failed to load and the product cannot continue

Similar Messages

Maybe you are looking for